Help with script to team NICs and assign IP in Win7 SP1

Hi All,
I have the following Power Shell script to team 2 NICs and assign IP, Gateway and DNS server:
# Create TEAM1, by binding 'Ethernet' and 'Ethernet 2' NICs.
New-NetLbfoTeam -Name TEAM1 -TeamMembers "LAN #1","LAN #2" -TeamingMode SwitchIndependent -LoadBalancingAlgorithm Dynamic -Confirm:$false
# 20 second pause to allow TEAM1 to form and come online.
Start-Sleep -s 20
# Configure static IP Address, Subnet, Default Gateway, DNS Server IPs to newly formed TEAM1 interface.
New-NetIPAddress –InterfaceAlias "TEAM1" –IPAddress 10.221.27.32 –PrefixLength 24 -DefaultGateway 10.221.27.1
Set-DnsClientServerAddress -InterfaceAlias “TEAM1” -ServerAddresses 10.221.103.1
I am trying to run the script in Windows 7 but I am getting the error that the cmdlets do not exist. I fear that this is not possible to do with PS in Win7. Is there a way to use PS in Win7 to accomplish this?
If not, can this be done in Win7 with any other scripting language? I have done some research but haven't had any luck.
Thanks in advance for any help.
Kind regards,
Ken

If the adapter vendor supports teaming they will have delivered a utility to create the teams. The CmdLets are supported only for Windows 8/2012
¯\_(ツ)_/¯
Thanks for your reply jrv.
I need to team the nics via script. Is it possible to do with VB?

Similar Messages

Teaming NICs and Assigning to VMs

Hi!
Is it better to team the NICs on Hyper-V Host and then assign it to VMs after creating the virtual switch or assigning separate physical NICs is better if there are only 2 or 3 VMs.
Thanks.

Hi create_share,
Teaming has more advantage than single NIC .
Bandwidth aggregation
Traffic failover to prevent connectivity loss in the event of a network component failure
For details please refer to following link:
http://technet.microsoft.com/en-us/library/hh831648.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.01 Updates on Iphone 4?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

Hi i would like help with: When I draw circle and add stroke I can not see stroke I use Photoshop CS 5

Hi i would like help with:
When I draw circle and add stroke I can not see stroke
I use Photoshop CS 5

Make sure the stroke is set to a color and not to the symbol that appears here for Fill

Teamed NICS and Port Configuration?

Hello,
I have a 2900xl that I've recently added 3 servers to. These are new Dell 2850's with Intel Pro100/MT nic's installed. I configured the nic's into a team with "fault-tolerance".
My other servers are older 1550's teamed using "FEC/802.3AD Static LA Mode" - I'm being told that the newer servers are running slower because they are not configured to support 802.3AD.
Is there a special configuration that needs to be done on the switch to maximize this teaming? I thought, as the 2900 is a fixed-configuration switch, I wouldn't need to do much configuring?
Thanks for any help and suggestions!
- Rob

Hello Rob,
in additon to what Dave said, I checked the Intel website and could not find any information on 802.3AD not being supported on the Intel NICs. How do you have your channel configured ?
Can you post the relevant channle config ?
Have a look at this document from Intel's website:
Networking and Communications
IEEE 802.3AD Dynamic and Static Switch Implementations use Different Team Modes
http://www.intel.com/support/network/sb/cs-020140.htm
Regards,
GP

Help with Script created to check log files.

Hi,
I have a program we use in our organization on multiple workstations that connect to a MS SQL 2005 database on a Virtual Microsoft 2008 r2 Server. The program is quite old and programmed around the days when serial connections were the most efficient means
of connection to a device. If for any reason the network, virtual server or the SAN which the virtual server runs off have roughly 25% utilization or higher on its resources the program on the workstations timeout from the SQL database and drop the program
from the database completely rendering it useless. The program does not have the smarts to resync itself to the SQL database and it just sits there with "connection failed" until human interaction. A simple restart of the program reconnects itself
to the SQL database without any issues. This is fine when staff are onsite but the program runs on systems out of hours when the site is unmanned.
The utilization of the server environment is more than sufficient if not it has double the recommended resources needed for the program. I am in regular contact with the support for the program and it is a known issue for them which i believe they do not
have any desire to fix in the near future.
I wish to create a simple script that checks the log files on each workstation or server the program runs on and emails me if a specific word comes up in that log file. The word will only show when a connection failure has occurred.
After the email is sent i wish for the script to close the program and reopen it to resync the connection.
I will schedule the script to run ever 15 minutes.
I have posted this up in a previous post about a month ago but i went on holidays over xmas and the post died from my lack or response.
Below is what i have so far as my script. I have only completed the monitoring of the log file and the email portion of it. I had some help from a guy on this forum to get the script to where it is now. I know basic to intermediate scripting so sorry for my
crudity if any.
The program is called "wasteman2G" and the log file is located in \\servername\WasteMan2G\Config\DCS\DCS_IN\alert.txt
I would like to get the email side of this script working first and then move on to getting the restart of the program running after.
At the moment i am not receiving an error from the script. It runs and doesn't complete what it should.
Could someone please help?
Const strMailto = "[email protected]"
Const strMailFrom = "[email protected]"
Const strSMTPServer = "mrc1tpv002.XXXX.local"
Const FileToRead = "\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\alert.txt"
arrTextToScanFor = Array("SVR2006","SVR2008")
Set WshShell = WScript.CreateObject("WScript.Shell")
Set objFSO = WScript.CreateObject("Scripting.FileSystemObject")
Set oFile = objFSO.GetFile(FileToRead)
dLastCreateDate = CDate(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\CreateDate"))
If oFile.DateCreated = dLastCreateDate Then
intStartAtLine = CInt(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked"))
Else
intStartAtLine = 0
End If
i = 0
Set objTextFile = oFile.OpenAsTextStream()
Do While Not objTextFile.AtEndOfStream
If i < intStartAtLine Then
objTextFile.SkipLine
Else
strNextLine = objTextFile.Readline()
For each strItem in arrTextToScanFor
If InStr(LCase(strNextLine),LCase(strItem)) Then
strResults = strNextLine & vbcrlf & strResults
End If
Next
End If
i = i + 1
Loop
objTextFile.close
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\FileChecked", FileToRead, "REG_SZ"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\CreateDate", oFile.DateCreated, "REG_SZ"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked", i, "REG_DWORD"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastScanned", Now, "REG_SZ"
If strResults <> "" Then
SendCDOMail strMailFrom,strMailto,"VPN Logfile scan alert",strResults,"","",strSMTPServer
End If
Function SendCDOMail( strFrom, strSendTo, strSubject, strMessage , strUser, strPassword, strSMTP )
With CreateObject("CDO.Message")
.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTP
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'basic
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendusername") = strUser
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = strPassword
.Configuration.Fields.Update
.From = strFrom
.To = strSendTo
.Subject = strSubject
.TextBody = strMessage
On Error Resume Next
.Send
If Err.Number <> 0 Then
WScript.Echo "SendMail Failed:" & Err.Description
End If
End With
End Function

Thankyou for that link, it did help quite a bit. What i wanted was to move it to csript so i could run the wscript.echo in commandline. It all took to long and found a way to complete it via Batch. I do have a problem with my script though and you might
be able to help.
What i am doing is searching the log file. Finding the specific words then outputting them to an email. I havent used bmail before so thats probably my problem but then im using bmail to send me the results.
Then im clearing the log file so the next day it is empty so that when i search it every 15 minutes its clean and only when an error occurs it will email me.
Could you help me send the output via email using bmail or blat?
@echo off
echo Wasteman Logfile checker
echo Created by: Reece Vellios
echo Date: 08/01/2014
findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > c:\log4mail.txt
if %errorlevel%==0 C:\Documents and Settings\rvellios\Desktop\DCS Checker\bmail.exe -s mrc1tpv002.xxx.local -t [email protected] -f [email protected] -h -a "Process Dump" -m c:\log4mail.txt -c
for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
This the working script without bmail
@echo off
echo Wasteman Logfile checker
echo Created by: Reece Vellios
echo Date: 08/01/2014
findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > C:\log4mail.txt
if %errorlevel%==0 (echo Connection error)
for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
I need to make this happen:
If error occurs at "%errorlevel%=0" then it will output the c:\log4mail.txt via smtp email using bmail.

Help with Scripting forms when additional characters added

Hi,
I am new to scripting in adobe professional, I thank anyone in advance for any advice or help they can give me.
I am trying to use the calcuations within the forms that I am putting fields onto. In the process I discovered that the program the forms are within are attaching a pipe and additional characters after the actual name that I have named them. So, I am not able to use even the simple calculations within adobe to "sum" fields.   For example: I named the field "1_1Text" and this is what displays when you go into the calculations and pick the fields you want. But the actual name is "1_1Text|1234567" so the calculations will not work.
I take it then I need to use the advanced scripting but I am unsure of the format for a routine such as this. I have a little knowledge of javascript but it has been awhile. There must be a scan to find the pipe and then you should be able to chop off the extra characters since I will never know the characters the program adds on so then I can do calculations on these fields. Then you would have to put them into an array or something to save them?   Any help with a script or hints would surely be appreciated.
Thanks!

Could explain more fully how you are creating your forms and what programs you are using from the creation of the base document to which program and how you are adding fields.
I think you are misunderstanding me.   I use Adobe Acrobat Professional 6.0. I can get the calculations to work correctly if I use the form as it is after creating it.
But these forms are put into an SQL database and they get selected within a VB.net program or ASP.net program (both are used). So these programs (VB.net or ASP.net) are adding the extra characters at the end, hence I do not know the names of the fields when the forms are being filled in. So the calculations do not work with the "original names" that I created for the fields.
I just figured if I created a routine that looped through and chopped off the extra characters these programs put on the end I would be able to do the calcuations and they would work. I believe there is a substring operation within javascript.

Help with Flex based popup windows and data population.

Hello, I need a bit of help with Flex popups. I have a flex
application that uses a popup window when you click on a button and
displays information about the image above the button the user
clicked. I have about 4 images and I need to be able to display
information about each of them through the popup window when users
click on the buttons below the image.
At this time, I am trying to do this from somewhat of a
"static" point of view because I do not believe my hosting company
supports Flex Data services. You will find my code below.
First File.
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="850" height="750"
cornerRadius="10" borderColor="#000000"
backgroundGradientColors="[#1b3434, #000000]">

<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
[Bindable]
private var win:IMSAI;
private function init():void{}
private function createPopup():void{
win=IMSAI(PopUpManager.createPopUp(this,IMSAI,true));
win.title = 'IMSAI.Net';
win.x = -500;
win.y = 0;
customMove.end();
customMove.play();
]]>
</mx:Script>
<mx:Style>
TitleWindow {
borderStyle:solid;
borderThickness:2;
</mx:Style>
<mx:Parallel id="customMove" target="{win}">
<mx:Move duration="2000" xTo="{(stage.width - win.width)
/ 2}" yTo="{(stage.height - win.height) / 2}" />
<mx:WipeDown duration="2000" />
</mx:Parallel>
This is the code to trigger the popup when a user clicks on
the button. The code below is the code for the popup.
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical" creationComplete="init()"
close="PopUpManager.removePopUp(this)"
showCloseButton="true" alpha=".8"
headerColors="[#000000,#1F3F62]" color="#FFFFFF"
minHeight="200" minWidth="300"
backgroundColor="#000000" title="IMSAI.net" width="520"
height="394" verticalAlign="middle" horizontalAlign="center">
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
private function init():void{}
]]>
</mx:Script>
<mx:Canvas width="470" height="338">
<mx:Image x="10" y="10" width="140" height="103">
<mx:source>file:///C|/ColdFusion8/wwwroot/IMSAI/Web-App/Site_Images/IMSAI
Final Movie.swf</mx:source>
</mx:Image>
<mx:Text x="10" y="121" text="Description:" width="75"
height="25" fontWeight="bold" color="#ff0000"/>
<mx:Text x="158" y="10" text="Client:" width="52"
height="28" fontWeight="bold" color="#ff0000"/>
<mx:Text x="196" y="10" text="IMSAI Microcomputers
& Fischer-Freitas Company" width="252" height="39"/>
<mx:Text x="159" y="46" text="Industry:"
fontWeight="bold" color="#ff0000"/>
<mx:Text x="216" y="46" text="Computer &
Microcontroller Manufacturing." width="232" height="35"/>
<mx:Text x="83" y="121" text="IMSAI.net is the front-end
web application for IMSAI Computer " width="355"/>
<mx:Text x="10" y="136" text="manufacturing, customer
support, and order processing. Driven by a Microsoft database
back-end, this application includes rich flash forms, site search
capabilities, and flash content. Currently under phase II of a
three phase development plan, the e-commerce logic and processing
capabilities are under development. Once finished, this application
will be able to process orders provide customers with instant order
confirmation numbers, shipment dates, and payment processing."
width="428"/>
<mx:Text x="10" y="244" text="Technologies:"
fontWeight="bold" color="#ff0000"/>
<mx:Image x="100" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/cf8icon.jpg</mx:source>
</mx:Image>
<mx:Image x="244" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/flashlogo.jpg</mx:source>
</mx:Image>
<mx:Text x="53" y="290" text="Coldfusion 8 Enterprise"
height="30"/>
<mx:Text x="230" y="290" text="Adobe Flash 8"/>
</mx:Canvas>
What I want to do is either be able to create a popup file
for each button and photo, or find a way to pass a name like a
button ID that corresponds to a XML data structure and then
provides the appropriate data for the photo. I have tried altering
the first page of code with the "public" declaration to allow for a
second popup file for each button and image, but the IDE won't
allow me to do such because it creates errors stating I can only
have one public declaration of the kind and function above per
application. Help resolving this would be greatly appreciated.
Thank you.

I have an idea of what I want to do. I am just having
difficulty articulating how to go about such. I know I want to find
a way so that if a user clicks on button 1, button 1 will send some
kind of variable. For example, a user clicks Btn1 under a picture.
Btn1 sends some kind of variable or binding to a data structure
which returns the picture's description, price, etc. and calls the
popup to display that data in a form like manner. Then the user
click Btn2 which does the same thing. The only purpose of the popup
is to display the data.
Do I create a data structure with a related name to say a
button name so when the btn is clicked, the a variable title btn1
will prepend itself to the data structure like
{btn1.imagename}
{btn1.price}
{btn1.description}.
I want each btn to call a different set of data about each
picture because right now, the code I have is allowing me multiple
buttons, but is just displays the popup. Is there a way to create a
separate popup window for each button? Thats seems as though it
would be easier. Thank you for your help.

Help with Script Logic

Hi All
I am trying to write the following script
*INCLUDE ..\finance\system_constants.lgl
*XDIM_MEMBERSET RATE=AVG,END
*SELECT(%IP_Currencies%, "[ID]", "INPUTCURRENCYDIM", "[MD] = 'D' OR [MD]= 'M'") )
*XDIM_MEMBERSET INPUTCURRENCY= %IP_Currencies%
*XDIM_MEMBER RATESRC=RATEINPUT
*WHEN INPUTCURRENCY.MD
*IS "D"
*REC(EXPRESSION=ROUND(1/%VALUE%,6),RATESRC="RATECALC")
*ELSE
*REC(RATESRC="RATECALC")
*ENDWHEN
*CLEAR_DESTINATION
*DESTINATION RATESRC=RATECALC
My LGX file looks like this.
*XDIM_MEMBERSET RATE=AVG,END
*XDIM_MEMBERSET INPUTCURRENCY= DZD,USD,ARS,AUD,ATS,BSD,BBD,BEF,BMD,BRL,GBP,BGN,CAD,CLP,CNY,CYP,CZK,DKK,XCD,EGP,EUR,FJD,FIM,FRF,DEM,XAU,GRD,HKD,HUF,ISK,INR,IDR,IEP,ILS,ITL,JMD,JPY,JOD,LBP,LUF,MYR,MXN,NZD,NOK,NLG,PKR,PHP,XPT,PLN,PTE,ROL,RUR,SAR,XAG,SGD,SKK,ZAR,KRW,ESP,XDR,SDD,SEK,CHF,TWD,THB,TTD,TRL,VEB,ZMK
*XDIM_MEMBER RATESRC=RATEINPUT
*WHEN INPUTCURRENCY.MD
*IS "D"
*REC(EXPRESSION=ROUND(1/%VALUE%,6),RATESRC="RATECALC")
*ELSE
*REC(RATESRC="RATECALC")
*ENDWHEN
*CLEAR_DESTINATION
*DESTINATION RATESRC=RATECALC
It gets validated fine and it also runs successfully through DPM. But the problem i am facing is that the above script is only running and posting data for USD in RATECALC where as I have lot many currencies listed in "INPUTCURRENCYDIM". It does not execute for any other currency except for USD. I want to run it for all the currencies.
Please suggest.
Diksha.
Edited by: Diksha Chopra on Jun 3, 2010 9:23 PM

Hi Diksha,
Please check in your inputcurrency dimension, how many members are there with the property MD as D?
I would suggest you to change your scritp to
*INCLUDE ..\finance\system_constants.lgl
*XDIM_MEMBERSET RATE=AVG,END
*XDIM_MEMBER RATESRC=RATEINPUT
*WHEN INPUTCURRENCY.MD
*IS "D"
*REC(EXPRESSION=ROUND(1/%VALUE%,6),RATESRC="RATECALC")
*IS "M"
*REC(RATESRC="RATECALC")
*ENDWHEN
*COMMIT
*CLEAR_DESTINATION
*DESTINATION RATESRC=RATECALC
Hope this helps.

Absolue beginner need your help with basics of shell / applescript and xode

Guys,
I'm an absolute beginner in both xcode and applescript trying to wrap a few shell commands with some basic graphical elements.
I will need your help after 2 days of tests and un-successful trials.
Trying to display "$ifconfig en0" shell results into a text box.
Here is what I'm doing:
property networkif : missing value
property dhcpview : missing value
set the dhcpview to do shell script "/sbin/ifconfig " & networkif
I can't have this accepted:
set contents of text field "hmmm" to "DHCP " & dhcpview
hmm is the name I have set under Interface Builder to a text box (NSTextView object)
Xcode compiler returns me an error :
ToolAppDelegate.applescript:99: error: A “"” can’t go after this identifier. (-2740)
Command /usr/bin/osacompile failed with exit code 1
while doing this is absolutely working but on a separate popup window:
display dialog " Here is your IP address in ALU's network: " & dhcpview
I have no clue what I'm doing wrong.

It looks like you are trying to use *AppleScript Studio* syntax in an AppleScriptObjectiveC project - the way you connect the user interface items to your script is different in the new framework. If you are creating a new ASOC project, take a look at MacScripter's entry level tutorial AppleScriptObjC in Xcode for some examples.

Need some help with Slow Downs in Java3D and Servlets

Hi,
I realize that there is a separate forum for Java 3D, but I posted there, and did not get any response. This is kinda the crux of my program, so I would like to invite anybody on this forum with knowledge of Java 3D and servlets to give it a stab. Between this post and that one, there are TWENTY duke dollars up for grabs.
Thanks.
http://forum.java.sun.com/thread.jspa?threadID=603198

Let me have an educated guess.
You calculated the time elapsed before sending in a server request - and at that point you have you updated timeLastStateChange yet, which means by the time of the next calculation of time elapsed this apparent delay is not counted in, hence the slow down in animation rate.
Hope this helps~
Alex Lam S.L.

Help with importing PC photo files and then organizing it all in iPhoto

Hi everyone,
I'm relatively new to mac but I am just loving my purchase! I need some serious help with getting all of my photos organized though so I can easily find it for editing in iMovie.
I've accumulated over 10,000 photos stored on my PC which I've since transferred over to my LaCie external drive for my MacBook Pro via a wireless network connecting my PC & Mac. Some of these I've put onto my laptop internal hard drive and those I've imported into the iPhoto library. However, do I need to move the rest of the photos from my LaCie drive into my internal hard drive to import the photos into iPhoto, or can I tell iPhoto to look for the files in the external drive. If so, how do I do that? I know I'll then have to create albums in order to sort them, which I know how to do. Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
I am quickly running out of hard drive space on my laptop which is why I've put most of my photos on the external drive. Once I organize my existing collection, I would like to be able to import new pictures and have it stored on my external drive, not my internal drive. How do I do that?
Any other tips on organizing a massive photo library would be greatly appreciated.
Thanks,
Karen

Karen,
Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
This is where you get to enjoy the power of iPhoto's database. You can change the Sort in the View menu. Check out View > Sort Photos > by Date.
Or, click the little calendar icon near the lower left corner of the iPhoto window. This allows you to filter the library by year, month, week, or date. You can Command-click to add another date to your filter. You can Option-click to choose a recurring date: you get that month or date for all years in your library. [Want to see your kid's birthday for every year? Just Option-Click that date. Cool.]
The keywords filter is similar. There is a preference setting where you choose to filter based on ALL keywords chosen (where by choosing more keywords you narrow your field) or ANY keyword (where the more keywords you choose, the larger your field will be). Click on a keyword to filter your library by all photos containing that keyword. Use Command-click to add more keywords to the filter. A difference is that Option-click will eliminate photos with that keyword from your filter. [You can find all pictures of your kids with your dog but NOT at Halloween.]
You can create Smart Albums to combine the use of dates, keywords, ratings, titles, comments and more. The more information you enter into the database, the more powerful the tools become.
When your task of importing is complete and you are ready to play with iPhoto's features it may help to look at the iPhoto multimedia tutorial. Better organized than trying to read through the Help files, it can help you get acquainted with many of iPhoto's features.
Have fun.

Need help with Go Pro Hero 3 and Premiere Pro CS6

Hello,
I recently acquired PP CS6. I put my clip (30 seconds long) and I go to preview while editing, for the first 1.5 seconds it is fine but then it is very choppy. The audio is fine but the video does not play smoothly. When I save and process the video it is fine. It is frustrating to try to edit video this way. I'm sure I'm missing a step when creating the project but I haven't used Premiere Pro since CS6. This is only happening with Go Pro Hero 3 videos, any of my other cameras are fine. Any ideas? Thanks

There's a lot of confusion over how video encoding affects subsequent editing performance - a higher data rate has no direct relation to how much effort is required to decode and play the footage, in fact a higher data rate often makes playback easier - which is why transcoding to AVI can help with playback even though the files can be hundreds of times larger. Data rates with the same codec depend on the frame contents and recording quality, but for playback and editing what matters is the GOP (group-of-pictures) structure and the complexity of the encoding algorithm. Provided your disks are fast enough the data rate is immaterial to Premiere.
With long-GOP files (as typically created by consumer DSLRs and helmet cams) we have keyframes (I-frames) with a complete set of pixel data, then a series of intervening P- and B-frames which only store the difference between 'now' and 'one frame before' or 'one frame after'. Unless you're on an I-frame you have to calculate the chain of differences from the nearest I-frame, and when editing or applying an effect we must re-calculate the entire GOP, so Premiere has to hold a lot of data in the buffer. Remember all timelines in Premiere are internally transcoded to 32-bit floating point, so it's more work to 'play' the footage in the monitors than would be done by a simple playback-only application such as VLC, or in some other brands of NLE that only work in the footage's color space. Premiere's hardware acceleration (MPE) only kicks in once the buffer has been ingested, all the decoding of the original H.264 frames happens in your CPU.
With digital cinema cameras and some hacked DSLRs, we record "all-I" footage - so there's no GOP overhead and playback/editing is massively smoother. I can scrub all-I footage from a hacked 7D no problem on my relatively-ancient spare laptop, but the long-GOP files from a factory 7D struggle to play at all. Our all-I 7D footage can hit 300MBit/s compared to 35 for long-GOP. Helmet cams such as the GoPro do all they possibly can to squeeze data onto their storage cards, which means they have long-GOP codecs that have some of the most complicated compression algorithms out there. The Hero3's implementation of H.264 uses the Ambarella chip, whose files are very small but an utter nightmare to decode - hence far more of a demand on your CPU than an equivalent clip from a DSLR.
Jim Simon wrote:
Might be the 35 Mbps that is causing the choppy playback.
It shouldn't, assuming sufficient hardware. My GH2 clips often get up to over 90 Mb/s and play just fine on an older i7 920.

Help with script to team NICs and assign IP in Win7 SP1

Similar Messages

Maybe you are looking for