Help with security settings please?

I just downloaded HP 8500 wireless software and each time I start up the macair, i get an error message about an incorrect security setting. Where does one find this setting and change it?

When you searched Google for "iPhone Error 21" what did you find?

Similar Messages

In Desperate need for help with Security Settings

I am currrently working on a project that requires a Flash
submenu running through an HTML Browser window and running from a
CD. The problem is that the final destination for these CDs will be
on computers without the capability to connect to the internet. So,
when the user gets the popup requiring them to change the security
setting in order to use the flash element, which is through the
internet (the dumbest way of doing this) they have no choice but to
decline the popup and therfore cannot use the flash submenu.
Is there a way to automatically be trusted whitiout the use
of the internet "security settings" window???????? If anyone from
Adobe/Macromedia read this please be advise that this should really
change to be computer based and not requiring an internet
connection.
If this is esay enough to change, I regret everything that I
am thinking of about Adobe/Macromedia at the time I writing this.
and please acceot my apologies.
If not, well.....
Thanks for anyones help.

When Exporting, you get the option of setting the Local
Playback security (very bottom of the Export dialogue box). Have
you checked to make sure you have yours set to "Access local files
only"?
What is the submeu trying to access that would cause the
sandbox warning?

Help with Privacy settings please

I have added my Home phone number to my contacts.
If I set Privacy to "Allow calls from Anyone to my Skype Number" and "block calls when phone number is hidden", then I can receive calls from Home OK. And it recognises the number as Home (it tells me one missed call from Home for instance)
BUT: if I set privacy to "only receive calls from numbers in my Contacts" then Skype rejects calls from my Home number (it rings once then gives the busy signal).
Can anyone help please - I am stumped since Skype recognises my Home as a Contact, the number is not hidden, but Skype will not accept the calls if Privay is set to Only receive calls from Contacts.
Solved!
Go to Solution.

Try to reset Skype Settings
http://community.skype.com/t5/Windows/Skype-auto-logs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Help with video settings please! videos will not play but audio of the vid

Hey..i have the 30GB ipod video. i have alot of music videos on there which are under the category movies on my ipod. i turned my ipod on about three weeks ago and none of the movies would play. they all appear as thumbnails. the thumbnails dont move but the audio of the movie does play. the thing that has happend is that somehow all my songs have come into the video playlist and i dont know how this has occured. i cannot plug my ipod to my computer as my computer no longer works. and if i plug it into my laptop then the songs and movies and photos will be earsed. i really want my videos to work again i just dont know how the settings have changed themselves.. is there any chance anybody knows how to get the videos to work again? if you require more information please let me know..the video settings are as follows: tv out - off, tv signal - PAL, widescreen - off. Also if i want to back up everything on my ipod how do i go abouts doing this so that i do not lose the data on it? thank you..chandni

same sentiment of mine...
my vids wont playu no more.. they're just stored in my music files..
i want them all back!!
pls help!!

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Help with Secure Erase

I need help with Secure Erase 7-pass in the utility disk. It keeps getting stuck at 25% and a pop up comes out saying not enough memory in the start up disk. Can someone tell me whats going on? After the pop up come on the erase will not proceed.

Hello,
moving files from your computer
You can delete files, folders, and other items on your disk that you no longer need.
You may want to store a backup copy or an archive of important items if you are trying to clear space on your hard disk for other things.
Drag the items to the Trash (at the end of the Dock).
Any files or folders you drag to the Trash remain there until you empty the Trash. If you change your mind about something, you can still retrieve it from the Trash if you haven't emptied it yet. Click the Trash icon to open the Trash window, then drag items back to your home folder.
Choose Finder > Empty Trash.
Even after you empty the Trash, deleted files may still be recovered by using special data-recovery software. To delete files so that they cannot be recovered, choose Finder > Secure Empty Trash. Files deleted in this way are completely overwritten by meaningless data. This may take some time, depending on the size of the file. To prevent the recovery of files you deleted previously, open Disk Utility (in Applications/Utilities), choose Help > Disk Utility Help, and search for help on erasing free disk space.
If an item is locked, you cannot put it in the Trash. Select the item and choose File > Get Info, then deselect the Locked checkbox in the General pane. If you do not own the item, you may need to provide an administrator's name and password to put the item in the Trash.
Press the Option key when you choose Empty Trash to prevent the warning message from appearing. You can also turn off the warning in the Advanced pane of Finder Preferences.
Also... using the Erase Free Disk Space button:
Erasing free disk space
When you delete files by emptying the Trash, Mac OS X deletes the information used to access the files but doesn't actually delete the files. Although the disk space used by deleted files is marked as free space, deleted files remain intact until new data is written over them. Because of this, deleted files can be recovered.
You can use Disk Utility to erase the "free" space used by deleted files by having zeros written over the space once, seven times, or 35 times. If you have a lot of free space on your disk, overwriting the free space several times can take a long time.
Erasing free disk space does not erase the other files on your disk.
In Disk Utility, select the disk or volume in the list with the free space you want to erase.
Click Erase, then click the Erase Free Space button.
Select an option, then click Erase.
After the process begins, you can interrupt it without harming your data.
You might see a message saying that you are running out of disk space, but you can ignore that warning. When this operation is complete, you will have the same amount of free space as you did when it started.
You can also erase free space when you empty the Trash in the Finder. Choose Finder > Secure Empty Trash.
Carolyn
Message was edited by: Carolyn Samit

Need help with export settings...Please

I am brand new to the camera I have but been using FCP for 6 years. The camera is a Panasonic HMC150 that records in the AVCHD codec. I have an Intel Imac 20 2.4 Ghz 4 gigs of ram. My audio/video settings for the sequence in FCP are as follows:
Sequence pre set: Apple pro Res 422 1920-1080 60i 48khz (footage is 1080 60i)
I Log and Transfer with no problem, edit no problem.
My question is when I go to export the finished sequence to Idvd or DSP, what settings do I use?
I have exported to quicktime movie file with "current settings" and I have had NO luck in compleely burning a DVD. Is this the correct setting? what is everyone else using? Any help would be greatly appreciated!

DVD is standard definition. You have to compress your HD material to SD first. Crack open the manual for Compressor or DVDSP and you'll get loads of valuable info. The first 30 or so pages of the DVDSP manual are quite informative, and easy to read.

Help with Secured Documents!

I have been using the same files for over a year with no issues. Up until today I was able to edit them with no problems. All of a sudden when I go to use a document I receive an error message stating that
"The security settings on this document prevent adding text and/or placing a signature on it from Adobe Reader. To fill and sign this document you need to print it out"
We have not made any changes to the files or our reader since the last time I used it to cause this to occur. Also, when I try to open an unsecured version from the original source I get the same error message. Other people can open on their computers from the original source without receiving this notification so it HAS to be something within my computer. I just don't know how to correct it. please help asI need to be able to fill in these forms.
Oh, and I am using a PC with Windows 7.

Hi Marissa,
All you need to is give the PDF reader rights. In Acrobat 11, go to File – Save as – Reader Extended PDF – Enable More tools (Form fill in/ Sign).Hope this helps?
Regards,
Rave

Problem with security settings

Dear all,
We have the problem that we create a PDF with CS3 (compatible down to Acrobat Reader 5) with no security settings.
This PDF is sent out to a colleague who's only having an Acrobat Reader installed on his computer. When he's checking the security settings, there are several security settings done. He urgently needs to comment things.
Please help. We are desperately seeking
Thanks a lot in advance!!!
Birgit

Hi Bernd,
Thanks for the quick reply! And: of course there is no Acrobat Reader As everyone around me calls it like this I just wrote w/o thinking about it. Sorry!
I passed your answer to my colleagues searching for a solution. Obviously they made the right settings but the other side using the Reader had a too old version in which commenting was not possible, yet.
Hmm, all this hustle for no reason...
Anyway: thank you very much for helping!
Take care,
Birgit

Need help with security

Hi. I'm new to this list, and pretty new to web services. I'm
currently trying to apply security to an existing application, and
i've been studing the tutorials at sun web
(http://java.sun.com/webservices/docs/1.4/tutorial/doc/). In the
simple sample, in the build.xml file, there's a 'gen-server' target
which i believe creates ties of the service, right? Well, i do the
same step in my application (just before packaging into a raw war
file), and move all the generated files, together with my server
compiled classes, to the WEB-INF dir. Therefore i have all that class
files in /WEB-INF/classes/hello (i'm doing this with a helloword
example). Included in those files, theres a file called
"HelloIF_Tie.class", which i assume is the tie for my service, created
by the 'gen-server' target.
After this i create a raw war file using the jar tool, and take the
generated file to a dir named "dist". Then i try to create a cooked
war file using the wsdeploy tool. However when i try to run the
application, the server seems to ignore any security options i have
configured. Looking into the deployable war file i found that it had
generated quite a few more class files
(HelloIF__HelloService__Tie.class between them), and that in the
jaxrpc-ri-runtime.xml file there was the following line:
tie='hello.HelloIF__HelloService__Tie'
This seemed a bit strange to me, since i believed that my tie file was
HelloIF_Tie.class. Therefore, i tried something: changing that line
for
tie='hello.HelloIF_Tie'
And packaging all into a war file again with the jar tool, everything
runs fine. However its kind of boring doing this every time i change
the server code. So my question is...
is it possible to tell the wsdeploy tool not to generate any tie
files, and use the ones existing in the raw war file???
is there any other solution to my problem???
Im sorry if these questions are stupid, but im still quite novice with
jwsdp and i dont know if im doing things right. Thank you very much.

CQAndroid, help is here! I am familiar with this feature and use it with my own laptop and iPhone and well. It's a great feature! It forwards all of your text messages to your phone and Macbook, if you like. There's a few steps to try. First go to your iPhone Messages settings (Settings > Messages > iMessage) and turn off iMessages and turn it on again. Then go to the iMessages Settings on your Mac and do the same. Also make sure to activate your telephone number in the iMessages settings on your Mac. Try this and keep us posted please. Thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Problems with security settings and itunes updates! What do I do?

So I preordered a cd that became available today. When I went to download it, a message came up saying that I need to download the latest version of itunes (7.-[can't remember the last part]but anyways) so I clicked on the upgrade icon. I then got a message saying "your current security settings do not allow this." No matter what I do with my security settings I keep getting this same message! I have windows xp, please help I would really really like to be able to download and listen to the cd I've paid for! Thank you in advance!

Maybe you aren't on an admin account in Windows? If not, create/logon to one and install it.
Or maybe you just need to go to the website and download it instead of updating through iTunes. Go here:
http://www.apple.com/itunes/download/

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

A problem with Security settings.

Good afternoon. We have just set up a new 802.11n Base Station to compliment our eight other Base Stations. These eight are an older version running V 5.7 of the software. Security on the older ones is set at WEP 128 bit and I need to set it at the same level for the new Base Station. But WEP 128 bit does not seem to be an option.
With WEP 128 bit security, our users can logon to our LAN via AirPort without having to know the AirPort network password.
This new Base Station wil not let users logon at all via AirPort until they join the AirPort network using its password. Without being able to logon, they can't join the network. Thus they are in a loop!
I'd appreciate any help on this issue please.
Brian Bowell
ICT Support.
Berkley School.

With WEP 128 bit security, our users can logon to our LAN via AirPort without having to know the AirPort network password.
That is not possible. If 128 bit WEP is enabled, anyone joining the wireless network will need to know the encryption password established for the 128 bit WEP. Typically you only need to enter the password once and the computer remembers the password for you.
If no password is required, you do not have wireless encryption enabled.
Wireless encryption (WEP, WPA2, WPA) does not apply to Ethernet clients.

Help w/ Security Settings for Mobile Hotspot w/ 2.2

I posted this over on moto's forum yesterday, but so far I've gotten no response. I figured I go ahead & post it here also, to see if some(1) may be able to help me w/ it:
I've searched far & wide, & haven't been able to come up w/ an answer to this. I would very much appreciate any info, advice, or education on this.
When I travel, I use the X to connect my laptop (HP notebook w/ Vista home prem) to the net, thru the hotspot. I've only been able to connect thru the hotspot using the WEP security setting. Since updtg. to (2.2), still can only connect using WEP setting. Now the only post I've been able to find w/ anything @ all about the hotspot & the security settings, was just a post about the steps to initially set it up. That was here on this forum & there were screen shots of pages frm the vzw site that (1) of the vzw employees had posted to answer that question. It showed WAP - 2 being used.
Now frm what I've read & understand, from searching for info on the diff. between the (2) settings, is that WAP / WAP - 2 is a much more secure setting than WEP. Also, I try to read-up on this kind of stuff to learn it, however, I'm still doing just that, learning & don't completely understand the diff. frm a tech. standpnt. I do sometimes do banking & paying bills online while traveling, so this is a major concern for me.
Is the diff. between the security of the (2) settings enough to worry about, as far as the fact that I'm dealing w/ personal info? Obviously, I don't need somebody in next hotel rm., etc., being able to get into my connection & see my info on my laptop. Also, has any(1) had any luck connecting thru the hotspot w/ WAP or WAP - 2 on their laptop? If so, is the problem poss. settings on my laptop? Thank u in advance any help ya'll can offer.
pcw67427

Ahh, okay, P.C., I see what you are talking about.
Network security is something that I've thrown myself into pretty heavily this year as we are more and more deploying networks within our audio and lighting systems for shows and concerts. In one instance, we have digital mixing consoles that can be controlled via that console's editing software running on a PC (or Mac, if you will). There are times where, instead of having the typical huge mixing console, 3 or 4 racks of power supplies, processing and effects units, and other supplies, I have a nice, comfortable chair and my X200 tablet PC mixing the entire show. I use the basic Linksys router connected to my Gateway notebook, the console, or consoles, and the speaker systems' processors. Then I use the X200 and Remote Desktop to, well, remotely control all of that. One of my purchases later this year will be a real enterprise router, hopefully for more range and speed.
Naturally, it would suck to no end if someone were to hack into my WLAN network, thinking they were logging onto someone's network to steal some internet time. The havoc that this could cause could potentially be a show-stopper. Or in extreme cases, cause some damage from accidental overdriving something.
Unfortunately, I've only been able to learn some very basic things because of my work load, shows, and just time in general. But I have learned that WEP is fairly easy to crack, while WPA is much, much harder, and WPA-2 being even more secure. What I would learn to know is WHY this is the case. I have enabled the WPA-2 security features in all of my routers. I also use the MAC address filters, although, yes, MAC addresses can be spoofed without too much trouble. But it's another layer of protection.
As I mentioned in the PM, I plan to enable the hotspot feature on my account this week and play with the X's hotspot capability during our upcoming state fair. I'll be looking at the security settings pretty closely since I know how those road guys are (since I AM one, LOL), constantly hunting for a connection to log onto, LOL.
As I said, I'm woefully lacking in thorough knowledge about network security. I'll bet there are some real wizs (wizi?) around here that can be more help than I can. I have heard a couple of IT guys say that they never, ever do banking and financial business on ANY wifi connection, regardless of the security method used. One of these guys has said that he'd rather do banking over a good 3G connection that he would any kind of WLAN. Whether there's anything one way or the other to these claims, I simply don't know, but I'd love to find out.
One thing is for certain...Hotels are FULL of folks hunting for internet connections and logging onto anything they can, err, get their hands on. So it goes without saying that you need better encryption than WEP if you plan to do financial stuff online. I haven't looked, but can you turn off the SSID on the X's hotspot feature? That would at least, not tell the world about the network you have, LOL
Hopefully, I'll learn some more next week. In the meantime, I hope some IT types can comment on this subject, And thanx in advance,
Take care,
Geri O

Help with security settings please?

Similar Messages

Maybe you are looking for