Help with sending pic in text

Ive been trying to send pic or video when i text ,but cant figure it out yet .Ive only had it a few days .Any pointers on how to do this ?

All you have to do is either press and hold on image and select share from list and pick text or if you use camera you have option to share image after taking phote by opening the left menu key and select share from list.

Similar Messages

Help with sending pics from iphone to another phone

i am trying to send pics from my iphone and it keeps giving me an exclamation mark to try again....i have never had issues sending in the past.
I am able to receive pics, and send through email. But for some reason it's not delivering when i do mms.
If anyone knows about this issue please respond
Thanks a bunch
Not sure the exact details of the phone, i know it's a 3gs

http://support.apple.com/kb/TS2755

How do i send pics using texting messaging?

how do i send pics using texting messaging?
it seems sms wont let me do it.
on my old w810i i usually text the pic to anyone.

I think you're suppose to address it with the recipients phone number @ whatever carrier they use. [email protected]
Someone can comment if this is not correct please.

I can not send pics thru text.

i have the cellular data on and mms on and still cant send pics thru text. when they go it takes forever

MMS is a carrier feature, ask your phone carrier what the issue is.

Help with 'Send to Many" on 5210 please

I am getting closer to the answer I need about sending a text message to as many people as possible from as inexpensive a phone as possible. Thanks to Jalisinfo for your help with my previous post. I have pasted below the response I have been sent from the Nokia care team to my question. Can anyone help with the part they were unable to answer about how many recipients I would be able to send to using this phone? I need to be able to send to about 70 contacts. All the recipients would be the only people in the contacts list.
"Pertaining to our previous email, the Nokia 5210 does not support the SMS distribution list feature. On this device, you can send SMS to more than one contacts. This feature is known as "Send to many".
We are unable to advise on the number of contacts you can send the SMS at one time."
Thanks to you all for your help.

oops

Help with exporting Deski to text file via Web Intelligence

We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

Help with Dropdown box autopopulating text

I have created a dropdown box and set-it up with scripting to populate text fields based upon selection. The problem that I am having is when you make your selection it does not automatically update the text box. I have to click on another form field once I make a selection, then click on the text in the dropdown box. This will then result in the text fields auto populating. Could you please help, so that these extra steps will not need to be taken. Below is the coding that I used.
var f = event.target;
if (f.value == "Blank")
{this.getField("TestMe").value = "";
this.getField("InsuranceCodes").value = "";}
if (f.value == "Aetna")
{this.getField("TestMe").value = "";
this.getField("InsuranceCodes").value = "90791 - Diagnostic Evaluation";
this.getField("InsuranceCodes2").value ="90832/ 90834/ 90837 - Psychotherapy";
this.getField("InsuranceCodes3").value ="90846 - Family Psychotherapy w/o Patient";
this.getField("InsuranceCodes4").value ="90847 - Family Psychotherapy w/ Patient";
this.getField("InsuranceCodes5").value ="96101 - Psychological Testing";
this.getField("InsuranceCodes6").value ="96103 - Computer Testing";
this.getField("InsuranceCodes7").value ="";
this.getField("InsuranceCodes8").value ="";
this.getField("InsuranceCodes9").value ="";}
if (f.value == "Anthem BC")
{this.getField("TestMe").value = "";
this.getField("InsuranceCodes").value = "90791 - Diagnostic Evaluation";
this.getField("InsuranceCodes2").value ="90832/ 90834/ 90837 - Psychotherapy";
this.getField("InsuranceCodes3").value ="90846 - Family Psychotherapy w/o Patient";
this.getField("InsuranceCodes4").value ="90847 - Family Psychotherapy w/ Patient";
this.getField("InsuranceCodes5").value ="96101 - Psychological Testing";
this.getField("InsuranceCodes6").value ="96103 - Computer Testing";
this.getField("InsuranceCodes7").value ="";
this.getField("InsuranceCodes8").value ="";
this.getField("InsuranceCodes9").value ="";}

I did move the coding to validation script and deleted it from the actions. I clicked also to commit the selected value immediately. However, when I change "event.target" to "event.value" it no longer works. If I do all the steps but leave "event.target" it does autopopluate, but the information is incorrect.

HT1688 I cant send pics in text messages

I cant send pics in my texts. Also i cant get my email on 3g service.
On wifi email is fine though.

when i try to pull up a photo in a text it just says LOADING and has the spinny circle thing.

Can't send pic via text!

for some reason starting today i have been unable to send pictures via text! i've synced, downloaded the latest itunes, turned it off and back on. i just keep getting a red exclamation point and it says Message Send Failure.
i have the iPhone 4 3G through verizon
thank you for any suggestions you may have! and please try to keep it basic- i'm horrible with technology!! what am i doing with an iPhone anyway?? but i love it-- when it works right!

http://support.apple.com/kb/TS2755

Droid Charge - 3rd one, same problem with sending photos via text (MMS)

Sending photos via text messaging (stock messaging client) does not work consistently.
In a 4G area, the texts go through fine with minimal errors (perhaps 1 out of 20 failures to send)
In a 3G or less, the texts give me an error message of "Failed" or pending, whether or not the recipient gets it (usually the recipient does not get the message) - this is true of recipients with AT&T, Sprint and Verizon service with smartphones and Blackberries.
If I do not delete the thread, I get the message "Too many unsent multimedia messages" and the phone will not initiate the send. The phone will, however, continue to try to sending the photo, causing very rapid battery drain.
The last phone was replaced because the phone was not closing out the message, according to the last technician to whom I spoke.
Is there something else I can do to get the full functionality of the phone I paid for? This is an extremely frustrating issue, and makes me regret switching to Verizon.

Hi moonchef!
Sending pictures is something I do on a daily basis, so I know how important this is! It is true that pictures have to be sent over the VZW network and not Wifi. I would like to ask you if you resent the same picture that failed? Or did you send the same picture again, but in a separate message? Please try sending it again separately and let me know the results. Thanks!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Blackberry Curve HELP with 2 things.....sending pics via text and calls/SERVICE PROVIDER IS SPRINT

Can it be done? I am having a hard time figuring that out. Can I send a picture I take using text feature? Not having to send via email or using bluetooth? You know how other phones, you just choose a picture and choose to send the picture and then you choose the contact to send to.... How do I do that with the curve? I need to send pictures and sending via email doesnt work when I need the picture to go through right away. Help!
Also, I have been having this huge problem... I get a phone call or make a phone call and the phone goes back to my screen saver and not the phone call screen where it shows how long you are on the phone, the screen where it shows you are on a phone call. It has been that sometimes the phone doesnt hang up and since the call stays on the screen saver screen I dont realize it and people on the phone are listening to my conversations. Or i accidently hit a button without realizing it and it calls someone but I dont know this because the phone doesnt show me its making a phone call and I hear voices.... not in my head, coming from the phone. Or i make a phone call and think the call didnt go through and start going through phone book and other options on my phone without realizing the person I called is already on the phone. I hope I made sense.
Message Edited by veronicazambran on 03-03-2009 07:30 PM

Welcme to the Frums!
Who is your service provider?
Nurse-Berry
Follow NurseBerry08 on Twitter

IPhone 4S iMessage won't send pictures but I can send pics as text message

iPhone 4S running 7.1. iMessage won't send pictures, ! Not delivered but I can send it as a text message.
Any ideas would be appreciated. Thanks

Hi Jamielbergeron!
Here is an article that will help you troubleshoot this issue with your iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Can anyone help with sending non-Ascii messages?

I'm currently writing a small application that sends and receives encoded messages through JavaMail. Here's the problem: each character in the string that I'm sending can be up to 11 bits long and I'm apparently losing accuracy while emailing encoded text.
Apparently, JavaMail treats Strings as a series of bytes, while Java treats Strings as a series of integers. When I try
String message = "Message to code";
message = encodeMessage(message);
message = decodeMessage(message);
and then print out the contents of message, I get the correct contents of message. However, when I try
String message = "Message to code";
message = encodeMessage(message);
Message msg;
msg.setContent(message, "text/plain");
and then receive the message and read the contents, the contents are changed. I tried a for/while loop to see what the string "message" was holding before and after I emailed it. The results:
Before:
Encoded text as integers: 74 196 478 1006 1921
After:
Decoded text as integers: 74 196 63 63 63 13 10
Can anyone give me suggestions on how I can send this data without losing accuracy? I had the idea of sending an int[] array, but I can't see an easy way of doing that... I'm fairly new to JavaMail, so any help is greatly appreciated :-)
Thanks,
Robert Chatham

I've figured out a solution only to come up with an even more bizarre problem. JavaMail is now inserting random bytes into my message.
My code:
(When sending the email):
String encodedMessage;
msg.setContent(encodedMessage);
(When receiving the email):
String encodedMessage = (String)msg.getContent();
I've printed out a list of the bytes in each string immediately before sending the encoded message and immediately after receiving the encoded message. I'm doing absolutely nothing to the message between the times I send and receive it (and I don't think there's a way to, considering that it's off at the mail server.)
Take a look at a sample of the bytes of the encoded message before sending and after receiving (I added parenthesis for emphasis):
0 74 1 96 4 78 10 6 19 21 18 87 17 65 14 13 7
0 74 1 96 4 78 (13) 10 6 19 21 18 87 17 65 14 13 (10) 7
So... what is causing these extra bytes to be inserted into my message? In ascii format, the two bytes represent (I believe) line feed and form feed - but why inserted, and why so randomly?
Thanks,
Robert

Help with sending email from RoadRunner account on Mac, iPhone, iPad

Recently, I have had strange issues where suddenly I realize that I cannot send email using Mac Mail (Mac OS X 10.8.1). Its a very frustration condition where when everything was once fine, suddenly you stop being able to send email without what appears to be 'reason'.
Today I learned the reason, and I assume others might run into this as well, so I am posting the issue and solution:
Per Time Warner/RoadRunner support: "When on your home network, the SMTP server does not require authentication. When away from your home network, the SMTP server REQUIRES authentication"
That is what I believe to be a mistake on RoadRunner's part. Hundred of thousands of users will not understand that they need to change this setting anytime they go for a coffee at Starbucks.
So to help, here is what I have come up with:
From Mail -> Preferences, you need to edit your SMTP server list. Click the drop-down list next to 'Outgoing Mail Server (SMTP) and select 'edit SMTP Server List. Create two server connections and name one something that reminds you that it is the home network, and the other a roaming network. Set the home network server config to Authentication -> None. Set the roaming network server config to Authentication -> Password and fill in the username/password credentials.
Having both these servers available for you to select from will reduce the impact of this inconvenient requirement from RoadRunner.
.....Comcast.....please make service available in my area.....

Bradley,
You did it. I used your suggestion and solved what I hope to be the last of a very persistent problem.
I made both a home and away SMTP server setting on my iMail. I tested both and are working well.
Of all my research, your suggestion was the only fix to this problem. Now, I hope to be able to send email wherever I am instead of waiting until I am at a home network or worse, resorting to using my phone.
Thanks again!

Help with Clipping Mask and text!

This has really been frustrating me.
Designing this logo at the mo - the circle is a shape and the L is just type on a separate layer on top with the same colour as background. What I want is to make the L cut into the circle so that it's essentially transparent, where I can place it on any coloured background and the L will blend it naturally without constantly changing typeface colour of 'L'.
Any ideas guys? Using CS5. I'd appreciate any help.

Hi,
One way is to put your text and circle into a layer group, then set the Blending Options:Custom to Zero fill and Knockout to Shallow.
The layer that is directly below the layer group will show through the text.

Help with sending pic in text

Similar Messages

Maybe you are looking for