Help with sequence settings in final cut for project with 2 different frame rates.

I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

Similar Messages

  • Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Update the software. There is no reason to run a two year old version.
    Russ

  • What is the triangle with exclamation mean in Final Cut X?

    What is the triangle with exclamation mean in Final Cut X project?

    If you mean the one in the image below (click to enlarge it) it shows that you have made changes to the project since it was shared, (The cone shape beneath it, shows a project has been shared).
    If you mean the yellow triangle with the exclamation mark, that is to show that you have media which is offline(FCP X can't find the source material).
    Andy

  • Will 7toX translate Final Cut Express projects to FCP X

    Does anyone know if the new 7toX application will translate Final Cut Express projects to Final Cut Pro X?

    So can you open a Final Cut Express project with Final Cut Pro 7, save that as XML, and then use 7toX?
    . . . I realize, of course, this won't help anybody who doesn't have FCP 7.

  • Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

    Hi friends.
    Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

    Just download Mavericks (10.9) its free and installed it (Mac App Store)

  • If I need to buy 15 Final Cut for the university.

    If I need to buy 15 Final Cut for the university. Do I have to do all the process 15 times?

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Final Cut Pro is an app for Macs and not an iOS app for an iPhone or iPad. You will need the link for Apple software volume licensing for education. That information and the phone number to call is available on this webpage;
    http://www.apple.com/mac/volume-licensing/

  • What version of final cut Will work with my mac mini ??

    what version of final cut Will work with my mac mini ?? Intel GMA 950 graphics processor with 64MB of DDR2 SDRAM shared with main memory Combo Drive
    1GB 667MHz DDR2 SDRAM - 2x512MB
    80GB Serial ATA drive
    1.83GHz Intel Core 2 Duo
    any firm answers?

    do people from apple ever answer or help out on these questions--i think this is a pretty straight forward question: what version of final cut works on the following?
    Refurbished Mac mini 1.83GHz Intel Core 2 Duo
    1GB memory
    80GB hard drive
    Combo drive (DVD-ROM/CD-RW)
    Intel GMA 950 graphics processor with 64MB of DDR2 memory

  • How to publish Motion 5 templates with another editor's Final Cut Pro x

    How to publish Motion 5 templates with another editor's Final Cut Pro x

    That's also simpel,
    Let the Motion 5 designer deliver the map that he made. For example he made a title effect with the title "We Are Awesome Company Title" than you get that map after the head "Effects" map. So he must send that map with all the stuff in it to an editor and the editor place that map in Motion Templates -> Effects.
    Restart Final Cut Pro X and there you go.

  • How well does Final Cut Studio run with 3gb of ram? Macbook Pro 2.33mhz

    I have a 2.33mhz (Model a1211) Macbook Pro. I've maxed out the ram to 4gb but because of the motherboard restrictions (that I still don't quite understand) it can only use 3GB.
    I've read on the FCS specs that the minimum is requirement is 1GB but Apple recommends 4GB.
    I cut mainly short 3 to 5 minute pieces with AVCHD video decoded with up to 60-90 minutes of footage.
    Will I have any serious issues with any of the Final Cut Studio Programs that I should be aware of?
    I'm obviously not expecting Mac Pro results but If it doesn't run very well with 3GB, I might have to rethink my purchase. If it is just a "hiccup" now and then with waiting for video to start or such, I will deal.
    Thanks
    Bryan
    <Edited by Host>

    Motion is gfx intensive. Meaning that the lower the gfx card, the lower the performance. You should expect little-to-no realtime performance from Motion on the system mentioned with even basic-to-remotely-intermediate animations. CPU RAM will make a difference in the amount of total frames that you can render in a RAM preview, but it will not affect realtime performance. With your proposed system: add a particle, a lower third text, a replicator with 5,000 points, a light with some shadows, and a reflection (and this is one of each mind you, not multiple instances) and expect around a * less than * 1-3 fps playback in draft quality with %50-%25 playback resolution. Then expect to wait up to a minute or more with the beachball of death for each parameter change. No joke either. Good luck fine-tuning your moderate-to-even-remotely-complex animation with your desired system.
    If working in Motion is your desire, then focus on the graphics card. Unfortunately you can not upgrade your gfx card on the MBP, so you should consider selling your MBP and investing in a Mac Pro. You can upgrade the gfx card in the Mac Pro and obtain optimal performance from Motion. Otherwise you'll literally be stuck in the mud with your animations.

  • Open Final Cut Pro project in Logic Pro for audio editing

    I want to open a Final Cut Pro project i'm working on into Logic Pro without having to export my large FCP projects to video all the time. Is there any way of doing this?

    Thanks for replying to my question, I did mean Logic Pro but I'm relatively new to these programs. What's the difference with Soundtrack Pro and Logic Pro exactly? If I understood you correctly, Logic Pro would be the program I need since I need to create audio from scratch. Just to be more clear again, I want to see my video while composing audio at the same time but without having to export my video all the time since it takes long, being a big file. Thanks again for the reply.

  • Will final cut express work with os maverick

    I am running mountain lion and FCE. will final cut express work with mavericks.?

    A follow-up to my previous post.  FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube). 
    A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left).  It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks).  So, I installed FCE on another iMac running Lion.  It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks.  It is working fine.  (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store?  Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

  • Can I use Final Cut Express 4 with Final Cut Pro 10

    Can I use Final Cut Express 4 with Final Cut Pro 10 on the same computer?
    Thank you,

    Yes, you can install both of them, but you can only have one open at a time.
    You can check this for yourself by downloading the free 30 day trial from
    http://www.apple.com/finalcutpro/trial/

  • Final Cut Express incompatibility with Final Cut Studio 2

    I recently upgraded to FCS 2. I have several projects created with Final Cut Express HD 3.5.1. I can open all projects created with FCE in Final Cut Pro 6.0 without difficulty. The problem occurs when I "round trip" a clip from Final Cut Pro 6.0 to Soundtrack Pro to remove audio problems. When the edited audio file is returned to the Final Cut Pro project, the audio is out of sync. This only happens when the project was created with FCE HD and opened in Final Cut Pro 6.0. If I make a new project starting from scratch in FCP 6.0 , use the same media, and perform a similar "round trip", the problems dissappears. I would hate to recreate all projects in FCP 6.0. Any solutions?

    chuckz33 wrote:
    Frame Rate to 8000
    Frame rate is fixed to 29.97 ot 25 in FCE. What do you plan with 8000 frames/second?
    HD1920X1080 is a frame size, what is the CODEC used (like H.264,MPEG2, QT animation, etc)?
    Michel Boisssonneault

  • When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

    When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

    Connect it to the charger unit as instructed by Apple.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

  • Why can't I use final cut pro 7 with Mavericks?

    Why can't I use final cut pro 7 with Mavericks? Is any one else having problems? All my media is reputedly "offline" even though I can see all the files. Using the reconnect to media function doesn't do a thing. All of my previous projects are the same. Any ideas would be most welcome!

    Because it is $299.99, and there is tax.
    Cheers,
    GB

Maybe you are looking for