Help with setting Ringtones from music MP3 files

New blackberry user....i have all my mp3's on my memory chip and now i need to know how to move them to "My ringtones? folder and then also how to have them just shuffle.
thank you
Michelle

The easiest way to manage music and ringtones would be to use the device as mass storage (I have listed the link below on how to enable this mode).
http://search.vzw.com/?do=viewdoc&id=28033
Once the mode is enabled, use the USB cable to plug in your device and computer. The computer should find the device, and you will be able to manage the folders and files on your SD card.
To assign a music file as a ringtone, you can click on the following link below:
http://search.vzw.com/?do=viewdoc&id=17080
***To shuffle the music that you would like to listen to, you can select the “shuffle songs” option in the media folder under the music icon.
I hope this was helpful!

Similar Messages

HT1766 i have backed up my iphone 5 and have a 5s I want to set up from that backup file. I have gone through the process once, and when I next connect the new AND the old phone to the mac and open itunes, restore or create new phone comes up not synch??

i have backed up my iphone 5 and have a 5s I want to set up from that backup file. I have gone through the process once, and when I next connect the new AND the old phone to the mac and open itunes, restore or create new phone comes up not synch?? Tried starting the whole process over once but same result. Seems not to recognise the phone and just synch as it should. Help?

Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

How do I transfer a ringtone from music to tone?

How do I transfer a purchased ringtone from music file to tones file?

If they are in 'Music', then they are not ringtones... They are short music clips.
Try this: http://bit.ly/1v0ayBU

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

How to set songs from music as ringtones for contacts

How do I set songs from my music that is on the phone as ringtones for different contacts?

Songs and ringtones have different formats. They are not interchangeable. You would have to convert a song into a ringtone.
If you have a Mac, you could use the GarageBand app to do that. If you have a PC, there are apps to do the conversion, but I cannot name one.

I upgraded from an iPhone2 to an iPhone4s now I can't sync the ringtones from music that I purchased from itunes to correspond with my contacts. How can I get it where I know who is calling from the ringtones I used to have?

I upgraded from an iPhone2 to an iPhone4s and now my ringtones are gone. I still have the music that I bought from iTunes that I made the ringtones from but I can't seem to get anything to work. Help! Thanks.

For the font problems, try the "Safe Mode" suggestion in this old thread:
http://discussions.apple.com/thread.jspa?threadID=1956989&start=20
...Found by doing THIS. Also see this Apple doc:
_Mac OS X: What is Safe Boot, Safe Mode?_
...Found by entering "safe mode" in the first field here:
http://support.apple.com/kb/index?page=search

How to get ringtones from music folder

I really need help getting my purchased ringtones from the music folder to the rigntone folder. support is not helping.
All of my purchased ringtones show up in my music folder and not in my ringtone folder. Please HELP anyone

After performing a (Finder) Find for .aif files, I located the tracks and was able to delete the playlist (album) folder with the tracks. So no assistance needed after all.
However, inexplicably, the folder with the tracks to be deleted was located in iTunes Music folder > Compilations folder, rather than in the artist folder. After finding and moving the folder of the tracks to the Trash, I checked the info of the original CD in iTunes out of curiosity and discovered that "Part of a compilation" was checked for the tracks, even though this is not a compilation (or even a live) album. I assume this sort of...tagging, I guess...was originally imbedded in the CD and is not a result of any glitch in iTunes. In fact, in the Compilations folder, I noticed several albums which are not compilation albums. I'd appreciate any thoughts or explanations as to why some non-compilation albums are checked as compilation albums.
Thanks,
Paul

Getting ringtones from music to tones...

I just imported some ringtones into iTunes. I did two sets. The first set I made as mp3s and they went to my tones folder when i said to sync it with my phone (5c). The second set went only into my music folder, even though they are also mp3s. I can't for the life of me figure out how to get the second set into my tones folder. Please help me.

The message says " Tones are not avalible on this device a device that can run iOS 5.0 or later is required".
The latest iOS that an iPhone 3G can handle is 4.2.1
http://en.wikipedia.org/wiki/IOS_version_history

Help with setting up a new user account

What is the solution to file sharing on the same computer with two separate User Accounts? I want to set up a new user account, but I want to be able to access the Documents, Music, Movies and Pictures folders, as well as others possibly in the original account. Is this easy to do, and/or possible without messing around too much with permissions and the like?
Thanks,
Mac

Setting up read only access for other users is pretty easy. Just change a few permissions and you're done. I'll show you how to do it if you like.
Setting up full read+write, well, that's a little trickier. It's because of how Mac OS X sets up permissions on new files and folders. By default, any new file or folder that is created gets full read and write permissions for the user that created it, and read-only for everyone else.
Changing permissions on the two users' home folders to that both users have full read+write for everything inside can be done, and it's not too hard. The problem is when new files are added - they will be read only for the other user. So the procedure has to be repeated again and again, every time a new file is created.
Having said that, it is possible to set up Access Control Lists on certain folders, so that anything that is created in to copied to the folder automatically gets read+write for both users. This is a little trickier to set up, but it can be done. I use it to share iMovie projects, and an iPhoto library between my and my wife's user accounts and it works well.
The latter solution requires entering some scary-looking Terminal commands. If you bro is scared to ask for help in web forums then he sounds likely to be scared of Terminal commands too. :/

Help with Moving Emails from Exchange Server 2013

Hi Team,
Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails.
Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
I would really appreciate any assistance that you can provide in this matter.
Regards, Greg.

Hi,
You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
3rd party database”.
Thanks,
Simon Wu
TechNet Community Support

Help with how to read and write files to the applets server

I am writing a form that requires some data to be written serverside(not on the host machine) and I also need to be able to read from those same files.
Can anyone provide any help?
I looked into signing but it seems, to me, that signing is for when you are going to be modifying files on the host...

brianb7590 wrote:
Would I use that to refer to the file like I would with a regular application?Nope. It's pretty complicated. You've got to set something up on the server to accept requests, get all the data and then save files somewhere and on the client side you've got to make the connection and send the data.
Edited by: tjacobs01 on Apr 13, 2009 5:49 PM

Help with redirecting URL from Web Dynpro

Hi,
I have a question regarding how i can construct a URL where i would like to forward the user from a WD app based on some user interaction.
The problem is that i need to know the protocol, server & host to resend the control to ( basically append these values to a url path that i have eg: <http(s)>://<host>:<port>/<the path i have>). With NW2004s, the request object is not exposed to us anymore, so i am wondering what is the best way to construct the url.
I have gone through various posts here and the one that came closest to accomplishing what i need is the one by Valery S which recommends creating a Servlet that captures the request info that i need and then calling the WD app including the info that i need as request parameters in the calling URL.
Before i do this, i want to see if anyone has been able to solve this through another approach.
Appreciate the inputs.
Best Regards
Renchy Thomas

Renchy,
Now I see you are conflicting with yourself
On one hand, if you need to redirect to the application hosted on the same server you need no protocol/server/port parameters. And you confirmed that this works for you.
On other hand, you are complaining that WD doesn't know in advance the protocol/host/port of arbitrary server you are planning to redirect to. Well, as I understand this is not API issue, this is configuration issue. You just need some configurable way to store such settings.
If this is true, then I can suggest 2 options:
1. HTTPDestination -- you are setting and configuring destination via VisualAdministrator, then from your code you are lookup destinitation by logical name and get physical URL.
2. IWDConfiguration / WDConfiguration -- you are creating settings as regular properties file, after deployment you may tweak this property file with VisualAdministrator. From code you are using WDConfiguration API to read URL or parts of URL as properties.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Help with setting Ringtones from music MP3 files

Similar Messages

Maybe you are looking for