Help with setting up a .mac to aim video chat.

Can anyone tell me how you are to setup your buddy list info, so that a person who's on a AIM account can video chat with a person on a .MAC account. We have tried several ways with AIM address and with .MAC address, but either way they both don't show as available in the buddy list. I though that you should be able to video chat with these accounts. They are compatible, right! Can someone give me the right setup config or the instructions to do so. Thank you very much!

This should help: http://www.mvldesign.com/videoconferencetutorial.html
Let us know if you have any issues.

Similar Messages

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

Hi guys, need your help with iCloud notes on Mac 10.7.5; I've found this feature's more useful comparing with stickers, however can't pin notes to desktop or dock, "double click"on the note doesn't work with this version of software.

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

Need help with setting up a PPTP connection

Hello all,
I am having trouble setting up a PPTP connection in Mac OS X "Snow Leopard". The ISP has provided the following info:
— Protocol: PPTP
— Login
— Password
— IP Address
— Subnet mask
— Default Gateway
— IP Address of the VPN Server
I am using the Airport Express as rounter, so here's what I entered in the Airport Utility on the Internet tab:
Connection: Ethernet
IP Address (as provided)
Subnet mask (as provided)
Router address (from Default Gateway)
Then I went to Connections, and created a new PPTP connection, setting the properties of the latter as follows:
VPN Server (as provided)
Account name (from Login)
Authenrification->Password (from Password)
and chose "Send all traffic over VPN connection".
The Airport is reported to have connected successfully, but the specified VPN Serverd does not ping, and when I try to connect via PPTP, an error is displayed saying that the PPTP-VPN server did not respond. Playing with different Encryption types did not help.
This same connection, when set up on a Windows machine, works well so I think I must have goofed with the Mac OS X settings. Could you help me find out what I could have done wrong?
Thanks in advance,
Anton

Pete Corelio:
{quote}You do have more network devices, at least a dsl or cable modem and maybe a switch connected to it. Are your PC and the AX connected to the same modem/switch?{quote}
No. There's only the Ethernet cable leading to some central (building-wide, or even wider) device. It was routed to my friend's apartment by the ISP people.
{quote}It's a bit uncommon to manually set the IP address within the TCP/IP section of the VPN network settings like you did. That's usually set to automatically get an IP via PPP... Please try a quick test using PPP instead.{quote}
Having the AX using DHCP and VPN using PPP makes part of the ISP settings unnecessary... Hmmm. Anyway, I did try PPP in VPN connection settings, to no avail. Alas.
{quote}It's also suspicious that you cannot open a connection to port 1723 with the telnet command. Are you sure the VPN type is PPTP and not LT2P over ipsec?{quote}
Yes, I am sure. The ISP's support confirmed it over the phone. Also they said they hadn't been able to set up any Mac with their network, but I am loth to believe the latter statement. And I clearly remember it was PPTP (not LT2P) in the Windows settings.
{quote}lease verify the IP settings on your PC...{quote}
OK, will do this Wednesday. Also I'll take a closer look at the VPN settings.
{quote}So your PC is on the same network and the VPN works from there? Is the PC using 3rd party VPN software or the built-in software?{quote}
No other clients, just a VPN connection configured using Windows built-in tools.
Anton
EDIT:
{quote}'m assuming the Mac gets an IP in the 10.x range and gets online OK right? {quote}
The AX is saying it's connected but there's no internet. This ISP is providing access to the internet through that VPN. The same AX works well with my MacBook at home, although I am using PPPoE.
Message was edited by: Ant_222

Help with elements 11 on mac

im using a mac and elements 11 opens for about 2 seconds then goes away. its in the tool bar on top of the page but no way to edit or organize photots. it's an MAC os x version 10.6.8.
everthing was working fine until recently with leads me to believe i accidently changed a setting on my mac. help please??

How are you starting PSE? The welcome screen, the editor, the organizer? If you were using the welcome screen, even the welcome screen set to open the editor or organizer automatically, don't. Go into the applications folder and launch the component you want from there, then go to the dock once it's running and choose Keep in Dock. Just don't use the welcome screen.
The organizer is easy to find, but the actual editor is hidden away in applications>Adobe Photoshop Elements 11>Support Files:

Help with setting a MDX goal expression in SSAS

Our data is updated monthly and the last date of available data can be anywhere from 45-75 days behind. For example, data is current through 6/30/2014
as of 8/25/2014.
I have a Time dimension hierarchy named [Calendar] with [Year]>[Half Year]>[Quarter]>[Month]>[Date]
I have a measure, [Measures].[Fatalities] set as a calculated member.
I have a KPI with [Measures].[Fatalities] set as the Value Expression. My issue is with setting up the goal expression.
I am trying to set a goal expression that is a percent reduction for a 5-year baseline average (Year-7:Year-3). So for the current year (2014, with data through
June 2014), the goal would be a 20% reduction of the average of the Jan-Jun 2007, Jan-Jun 2008,Jan-Jun 2009,Jan-Jun 2010,Jan-Jun 2011.
I have set up the following MDX as the goal expression:
.8*((
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],7,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],6,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],5,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],4,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],3,[Time].[Calendar].CurrentMember))
)/5
The problem is that the goal is taking the entire year average at the year level of the Calendar hierarchy. For example, in the attached screenshot, the
Fatalities Goal would be empty when the fatalities is empty, and more importantly, the goal at the Year level of the Calendar hierarchy would only be the sum of Jan-Jun goal. The Fatalities Goal in this example should read 549.28 at the Calendar 2014
Year level and the status would still be green.
http://i.imgur.com/peHD9Wl.png

you might find this app interesting: http://ivolume.en.softonic.com/mac.

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Help with set(index, object) please / new to java

private static void setDobject(Rectangle [] setrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.set(1,myrectangle);
          for(Rectangle x : setrect)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
     } //End of unsorted
     } the other previous code works, i have used the add(object) and it works here is the code for that:
private static void addDobject(Rectangle [] addrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.add(myrectangle);
             for(Rectangle x : rects)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
          System.out.println();
     } //End of unsorted
this is the output error it is giving me :
Part 1 : An Array List of Rectangles
Enter length or 999 to exit: 3
Enter width: 2
Enter length or 999 to exit: 1
Enter width: 2
Enter length or 999 to exit: 10
Enter width: 20
Enter length or 999 to exit: 999
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Display Object with added item
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Rectangle: 9.0 by 9.0
Displaying Objects with SET item
Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 1, Size:
0
at java.util.LinkedList.entry(LinkedList.java:365)
at java.util.LinkedList.set(LinkedList.java:328)
at Lab11.setDobject(Lab11.java:129)
at Lab11.main(Lab11.java:78)
Press any key to continue...
finally here is the Rectangle class i'm using:
public class Rectangle
    private double length;     // Instance variables
    private double width;
    public Rectangle(double l, double w) // Constructor method
        length = l;
        width = w;
    } // end Rectangle constructor
    public double getLength()             // getter
         return length;
    } // end getLength
     public double getWidth()             // getter
         return width;
    } // end getWidth
    public void setLength(double l)      // setter
         length = l;
    } // end setLength
     public void setWidth(double w)     // setter
         width = w;
    } // end setWidth
     public double calculateArea()         // calculation method
        return length * width;
    } // end calculateArea
    public void displayRectangle()         // display method
        System.out.println("Rectangle Length = " + length);
        System.out.println("Rectangle Width = " + width);
    } // end displayRectangle
} // Rectangle ClassHope you can help guys! thanks!

LinkedList<Rectangle> rects = new LinkedList<Rectangle>();rects is an empty LinkedList at this point. It has no elements added to it.
rects.set(1,myrectangle);So you can't set the item at index 1 (the 2nd element in the list) because it doesn't even exist. You need to add items to it.

Help with Gmail IMAP in Mac Mall: Folders transfered from Exchange server

I'm in the process of migrating a mail account from an Exchange server over to Goggle Apps. I've transfered all old mail and the existing Exchange folder structure over to Gmail. Gmail doesn't recognize folders but instead reads the folder structure as Labels. When the account is subsequently imported into Mac Mail it appears that the orgiginal Exhange folder structure holds on the other side, which was my intent. These folders appear in Mail within the Mailboxes>Inbox.
However, there doesn't seem to be a way to insert a new folder into the Gmail IMAP account within the Inbox folder structure. I have successfully created a new "Mailbox" in Mail, but this appears to get inserted into the local version of the Gmail account much lower on the left hand side bar. It seems that I can pick up the "Mailbox" once it is created and move it up into the intended location, but only as a sub-folder. I am not able to promote it to the desired heirarchy or intended location.
Does anyone have any history with this or possibly a fix or suggestion?
Thanks!

My recollection is that unless you are a paid Hotmail account member, you cannot use Mail. Do a search within the discussion group, as I am not an expert, but I recall not getting Hotmail for that very reason.
Perhaps give gmail a try.....
That said....I still need some help with my posting! So please and thank you.

Need help with iMac intel desktop - Mac mail consistently going OFFLINE

I need help with Mac mail - it is frequently going "offline" and requesting me to "take all accounts online". My internet is working. It's been checked, checked and checked. Sometimes it just takes a reboot of the system and the modem to kick it in and make the little triangle symbol go away, but should I have to reboot daily? I have the Mac OS X Lion 10.7.5 installed. Is there a bug here or am I supposed to upgrade to Mavericks? Any help is most appreciated.

For me this is an issue caused by my email service provider. When they are slow to respond or to accept the password Mail takes that as a password rejection, and prompts me to reenter password, and eventually goes offline.

New computer ~ Help with setting up

Hi everyone, Newbie here!
I am going to set my new computer up tomorrow. The computer I am using at present was installed and set up by someone else so this will be a great learning curve for me. Also I had Infinity installed by the engineer.
Is everything I need to install relating to my broadband available to download? What do I need altogether? I spoke to a BT chap on the phone and he said he would help by remote access. I am a bit nervous of this!
I need to ensure my computer is safe and secure and it all seems technically daunting. Norton security came with my Microsoft Office package. Is this better than McAfee (Net Protect Plus), do I need both? What about a key code scrambler (someone mentioned this to me). As you can see I need reassurance and help arghhhhhhh.
A step by step guide would be great!
Thanks
Solved!
Go to Solution.

It is best not to install any of the BT software, just connect your computer to the BT Home hub using an Ethernet cable, or by using the wireless key, if its a wireless connected computers.
See http://bt.custhelp.com/app/answers/detail/a_id/14964/~/getting-started-with-wireless
Using a direct cable connection is best, if you want to get maximum speed.
I would not allow anyone remote access, but if you have no choice, and cannot resolve the issue any other way, then make sure that it is as a direct result of you ringing BT, and not some random person ringing you at home, pretending to be from BT or even Microsoft.
Many people have been caught out by that type of call, and had their computer infected with spyware.
If you already have a trial version of Norton Security, then by all means use it until it expires, then uninstall it.
After that, you have the choice of using the free Microsoft Security Essentials, which is preferred by many forum members, or using BTs Netprotect which is free with some broadband packages. This has been known to make computers run more slowly though.
That is all you need.
If you have any problems, then please return here.
If you have any problems with BT Infinity, then please visit the Infinity board on this forum.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help with setting up a .mac to aim video chat.

Similar Messages

Maybe you are looking for