Help with setting up DSN without CF Admin

Is it possible to set up a DSN without access to the CF Administration panel? Can I write this into a .cfc or is there some code I can run in a .cfm that will achieve this for me? I'm having trouble getting my host to set up the DSN I'm using and would like to know if there is any other way to achieve this.
I have all my DSN parameters (I{ address, username, Passw, etc...), and it's working just fine on my local version of the site but I set it up through Administration.
Thanks in advance.

Nothing that doesn't requre support from your ISP.
There is an administrator API that you can progamatically add DSN and other Administrator settings. But this API would need to be opened to you by your ISP and they maybe unwilling to do so. But it never hurts to ask.

Similar Messages

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

Is it possible to set up ADFS without domain admin rights in Windows 2012 R2?

I've set up Windows 2012 R2 on my development box and want to enable the ADFS feature to test claims based authN. In ADFS 2.0, you could opt to install standalone and local admin privileges would be enough to install ADFS and authenticate against the domain
AD.
However, with the new ADFS, after installing the feature it asks to enter the credentials for an account that is a domain admin. Is it still possible to configure ADFS without domain admin privileges?

Hi,
According to my research, if you want to set up AD FS in Windows server 2012 R2, each computer
that functions as a federation server must be joined to an Active Directory domain.
Besides, AD FS requires a certificate for SSL server authentication on each federation server in your federation server farm. Furthermore, you need a membership in
Administrators on the local computer to install the AD FS role service.
For more detailed information, please refer to the links below:
How to deploy AD FS in Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303423.aspx
Best regards,
Susie

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

Help with set(index, object) please / new to java

private static void setDobject(Rectangle [] setrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.set(1,myrectangle);
          for(Rectangle x : setrect)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
     } //End of unsorted
     } the other previous code works, i have used the add(object) and it works here is the code for that:
private static void addDobject(Rectangle [] addrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.add(myrectangle);
             for(Rectangle x : rects)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
          System.out.println();
     } //End of unsorted
this is the output error it is giving me :
Part 1 : An Array List of Rectangles
Enter length or 999 to exit: 3
Enter width: 2
Enter length or 999 to exit: 1
Enter width: 2
Enter length or 999 to exit: 10
Enter width: 20
Enter length or 999 to exit: 999
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Display Object with added item
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Rectangle: 9.0 by 9.0
Displaying Objects with SET item
Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 1, Size:
0
at java.util.LinkedList.entry(LinkedList.java:365)
at java.util.LinkedList.set(LinkedList.java:328)
at Lab11.setDobject(Lab11.java:129)
at Lab11.main(Lab11.java:78)
Press any key to continue...
finally here is the Rectangle class i'm using:
public class Rectangle
    private double length;     // Instance variables
    private double width;
    public Rectangle(double l, double w) // Constructor method
        length = l;
        width = w;
    } // end Rectangle constructor
    public double getLength()             // getter
         return length;
    } // end getLength
     public double getWidth()             // getter
         return width;
    } // end getWidth
    public void setLength(double l)      // setter
         length = l;
    } // end setLength
     public void setWidth(double w)     // setter
         width = w;
    } // end setWidth
     public double calculateArea()         // calculation method
        return length * width;
    } // end calculateArea
    public void displayRectangle()         // display method
        System.out.println("Rectangle Length = " + length);
        System.out.println("Rectangle Width = " + width);
    } // end displayRectangle
} // Rectangle ClassHope you can help guys! thanks!

LinkedList<Rectangle> rects = new LinkedList<Rectangle>();rects is an empty LinkedList at this point. It has no elements added to it.
rects.set(1,myrectangle);So you can't set the item at index 1 (the 2nd element in the list) because it doesn't even exist. You need to add items to it.

New computer ~ Help with setting up

Hi everyone, Newbie here!
I am going to set my new computer up tomorrow. The computer I am using at present was installed and set up by someone else so this will be a great learning curve for me. Also I had Infinity installed by the engineer.
Is everything I need to install relating to my broadband available to download? What do I need altogether? I spoke to a BT chap on the phone and he said he would help by remote access. I am a bit nervous of this!
I need to ensure my computer is safe and secure and it all seems technically daunting. Norton security came with my Microsoft Office package. Is this better than McAfee (Net Protect Plus), do I need both? What about a key code scrambler (someone mentioned this to me). As you can see I need reassurance and help arghhhhhhh.
A step by step guide would be great!
Thanks
Solved!
Go to Solution.

It is best not to install any of the BT software, just connect your computer to the BT Home hub using an Ethernet cable, or by using the wireless key, if its a wireless connected computers.
See http://bt.custhelp.com/app/answers/detail/a_id/14964/~/getting-started-with-wireless
Using a direct cable connection is best, if you want to get maximum speed.
I would not allow anyone remote access, but if you have no choice, and cannot resolve the issue any other way, then make sure that it is as a direct result of you ringing BT, and not some random person ringing you at home, pretending to be from BT or even Microsoft.
Many people have been caught out by that type of call, and had their computer infected with spyware.
If you already have a trial version of Norton Security, then by all means use it until it expires, then uninstall it.
After that, you have the choice of using the free Microsoft Security Essentials, which is preferred by many forum members, or using BTs Netprotect which is free with some broadband packages. This has been known to make computers run more slowly though.
That is all you need.
If you have any problems, then please return here.
If you have any problems with BT Infinity, then please visit the Infinity board on this forum.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help with setting a MDX goal expression in SSAS

Our data is updated monthly and the last date of available data can be anywhere from 45-75 days behind. For example, data is current through 6/30/2014
as of 8/25/2014.
I have a Time dimension hierarchy named [Calendar] with [Year]>[Half Year]>[Quarter]>[Month]>[Date]
I have a measure, [Measures].[Fatalities] set as a calculated member.
I have a KPI with [Measures].[Fatalities] set as the Value Expression. My issue is with setting up the goal expression.
I am trying to set a goal expression that is a percent reduction for a 5-year baseline average (Year-7:Year-3). So for the current year (2014, with data through
June 2014), the goal would be a 20% reduction of the average of the Jan-Jun 2007, Jan-Jun 2008,Jan-Jun 2009,Jan-Jun 2010,Jan-Jun 2011.
I have set up the following MDX as the goal expression:
.8*((
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],7,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],6,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],5,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],4,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],3,[Time].[Calendar].CurrentMember))
)/5
The problem is that the goal is taking the entire year average at the year level of the Calendar hierarchy. For example, in the attached screenshot, the
Fatalities Goal would be empty when the fatalities is empty, and more importantly, the goal at the Year level of the Calendar hierarchy would only be the sum of Jan-Jun goal. The Fatalities Goal in this example should read 549.28 at the Calendar 2014
Year level and the status would still be green.
http://i.imgur.com/peHD9Wl.png

you might find this app interesting: http://ivolume.en.softonic.com/mac.

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Help with setting up application form to change per week.

Hi all, i am going to be creating a simple feedback system application on apex but from the requirements given to me I am somewhat uncertain of how to go about creating it.
The requirements are roughly:
A feedback system to capture thoughts and views of students each week.
An 'admin' area for the lecturer to define how many weeks the course is running for and whether there are 2/3/4 sessions each week for the duration.
The form in which the student will give feedback each week.
A results chart/graph/report in the 'admin' area, (with a printable PDF possibly?)
My question is, when the lecturer defines how many weeks the course is running for and how many sessions a week there is, is there any way of setting the form page (the student uses to give feedback) to change for each week i.e week1, week2 etc. So the student doesn't keep supplying the feedback for week1 for example.
The number of sessions will simple enough to sort out im thinking, just create the page with the highest possible amount of sessions on, then if there is only 2 sessions a week, only 2 will be displayed to fill in and the others will be hidden. If this is possible?
Any ideas and thoughts are welcome. Please also mention any other ways of doing this if you have any!
Thanks in advance,
Ashleigh

Hello Ashleigh,
>
My question is, when the lecturer defines how many weeks the course is running for and how many sessions a week there is, is there any way of setting the form page (the student uses to give feedback) to change for each week i.e week1, week2 etc. So the student doesn't keep supplying the feedback for week1 for example.
>
The answer for the above question is YES, with the help of form based on APEX_COLLECTIONS and/or APEX_ITEM API.
Now the question is HOW. The answer to this question is for example the Timesheets Packaged Application which was provided by OTN a while ago(say before release of APEX 4.1) which was available here:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/packaged-apps-090453.html
The application provided a way to collect no. of hours a particular person has worked on particular timecode in a week.
The main page consisted of a form built on collection(which was built on page load) whose first column consisted of timecode drop-down and rest of the column headers consisted of days of the week and the columns consisted of textbox for entering no. of hours worked. In short it was type of matrix form.
Hope it helps!
Regards,
Kiran

Help with setting up a new user account

What is the solution to file sharing on the same computer with two separate User Accounts? I want to set up a new user account, but I want to be able to access the Documents, Music, Movies and Pictures folders, as well as others possibly in the original account. Is this easy to do, and/or possible without messing around too much with permissions and the like?
Thanks,
Mac

Setting up read only access for other users is pretty easy. Just change a few permissions and you're done. I'll show you how to do it if you like.
Setting up full read+write, well, that's a little trickier. It's because of how Mac OS X sets up permissions on new files and folders. By default, any new file or folder that is created gets full read and write permissions for the user that created it, and read-only for everyone else.
Changing permissions on the two users' home folders to that both users have full read+write for everything inside can be done, and it's not too hard. The problem is when new files are added - they will be read only for the other user. So the procedure has to be repeated again and again, every time a new file is created.
Having said that, it is possible to set up Access Control Lists on certain folders, so that anything that is created in to copied to the folder automatically gets read+write for both users. This is a little trickier to set up, but it can be done. I use it to share iMovie projects, and an iPhoto library between my and my wife's user accounts and it works well.
The latter solution requires entering some scary-looking Terminal commands. If you bro is scared to ask for help in web forums then he sounds likely to be scared of Terminal commands too. :/

Help with setting up DSN without CF Admin

Similar Messages

Maybe you are looking for