Help with setting up Tiem Capsule on existing DSL network

I am trying to connect my Time Capsule up to an existing network. I used Airport Utility to setup the Time capsule with the correct WEP password etc.; the dialog box says I successfully set up the Time Capsule. The box then says it is trying to connect to the network, but nothing ever happens (I have waited for over an hour once). Also, Time Capsule immediately disappears from the view and I cannot do anything to see it in Airport Utility except to reset it back to factory settings. Square one. This happened several times. Any help would be appreciated.

I try power down of ALL network devices, modem first. Then power up modem first.
Use Airport Utility and check if any orange lights are showing, if so double click and see what it tells you is wrong.

Similar Messages

Can anyone help with setting up AirPrint on my iPhone 4

Can anyone help with setting up AirPrint on my iPhone 4. Printer is ready.

you have a compatable printer correct? http://support.apple.com/kb/ht4356
if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
http://www.udeo.com/mac/printopia/
hope thats helped
Goody

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help with setting up time machine for backup

I would like help with setting up time machine for backup.

You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

Help with setting up microcell-time capsule-dsl

how do i set up time capsule with motorola nvg510 router and microcell by at&t

The express is also connected via ethernet to the Time Capsule so I can use it for my iPhones and such that do not have N. If I am on the Macbook and I am on the Time Capsule network, is there a way to not have to switch wireless networks to the Airport Express just to listen to Air Tunes?
Yes. Just reconfigure the AirPort Express Base Station (AX) as a bridge.
(ref: AirPort Utility > select the AX > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

Help with set(index, object) please / new to java

private static void setDobject(Rectangle [] setrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.set(1,myrectangle);
          for(Rectangle x : setrect)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
     } //End of unsorted
     } the other previous code works, i have used the add(object) and it works here is the code for that:
private static void addDobject(Rectangle [] addrect)
          LinkedList<Rectangle> rects = new LinkedList<Rectangle>();
          Rectangle myrectangle = new Rectangle(9.0,9.0);
             rects.add(myrectangle);
             for(Rectangle x : rects)
               System.out.print("Rectangle: ");
               System.out.println(x.getLength() + " by " + x.getWidth());
          } //End of for loop
          System.out.println();
     } //End of unsorted
this is the output error it is giving me :
Part 1 : An Array List of Rectangles
Enter length or 999 to exit: 3
Enter width: 2
Enter length or 999 to exit: 1
Enter width: 2
Enter length or 999 to exit: 10
Enter width: 20
Enter length or 999 to exit: 999
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Display Object with added item
Rectangle: 3.0 by 2.0
Rectangle: 1.0 by 2.0
Rectangle: 10.0 by 20.0
Rectangle: 9.0 by 9.0
Displaying Objects with SET item
Exception in thread "main" java.lang.IndexOutOfBoundsException: Index: 1, Size:
0
at java.util.LinkedList.entry(LinkedList.java:365)
at java.util.LinkedList.set(LinkedList.java:328)
at Lab11.setDobject(Lab11.java:129)
at Lab11.main(Lab11.java:78)
Press any key to continue...
finally here is the Rectangle class i'm using:
public class Rectangle
    private double length;     // Instance variables
    private double width;
    public Rectangle(double l, double w) // Constructor method
        length = l;
        width = w;
    } // end Rectangle constructor
    public double getLength()             // getter
         return length;
    } // end getLength
     public double getWidth()             // getter
         return width;
    } // end getWidth
    public void setLength(double l)      // setter
         length = l;
    } // end setLength
     public void setWidth(double w)     // setter
         width = w;
    } // end setWidth
     public double calculateArea()         // calculation method
        return length * width;
    } // end calculateArea
    public void displayRectangle()         // display method
        System.out.println("Rectangle Length = " + length);
        System.out.println("Rectangle Width = " + width);
    } // end displayRectangle
} // Rectangle ClassHope you can help guys! thanks!

LinkedList<Rectangle> rects = new LinkedList<Rectangle>();rects is an empty LinkedList at this point. It has no elements added to it.
rects.set(1,myrectangle);So you can't set the item at index 1 (the 2nd element in the list) because it doesn't even exist. You need to add items to it.

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need help with Set-ADUser command

I need a little help with the following command. Im new to PS and I have found this command but it is only one user at a time. I need to be able to update ALL users in AD.
My goal is this. Someone before me set all Users Home numbers to 1234567899 and I need to remove that and leave it blank. The command below allows me to do that but only one user at a time by entering their SAMID.
Is there a way to do this for everyone in AD ?
Set-AdUser –Identity SAMID –HomePhone $NULL

Yeah sure -
Get-Aduser -filter * -properties SamaccountName | Select SamAccountName | % {Set-Aduser -identity $_.SamaccountName -HomePhone $null}

New computer ~ Help with setting up

Hi everyone, Newbie here!
I am going to set my new computer up tomorrow. The computer I am using at present was installed and set up by someone else so this will be a great learning curve for me. Also I had Infinity installed by the engineer.
Is everything I need to install relating to my broadband available to download? What do I need altogether? I spoke to a BT chap on the phone and he said he would help by remote access. I am a bit nervous of this!
I need to ensure my computer is safe and secure and it all seems technically daunting. Norton security came with my Microsoft Office package. Is this better than McAfee (Net Protect Plus), do I need both? What about a key code scrambler (someone mentioned this to me). As you can see I need reassurance and help arghhhhhhh.
A step by step guide would be great!
Thanks
Solved!
Go to Solution.

It is best not to install any of the BT software, just connect your computer to the BT Home hub using an Ethernet cable, or by using the wireless key, if its a wireless connected computers.
See http://bt.custhelp.com/app/answers/detail/a_id/14964/~/getting-started-with-wireless
Using a direct cable connection is best, if you want to get maximum speed.
I would not allow anyone remote access, but if you have no choice, and cannot resolve the issue any other way, then make sure that it is as a direct result of you ringing BT, and not some random person ringing you at home, pretending to be from BT or even Microsoft.
Many people have been caught out by that type of call, and had their computer infected with spyware.
If you already have a trial version of Norton Security, then by all means use it until it expires, then uninstall it.
After that, you have the choice of using the free Microsoft Security Essentials, which is preferred by many forum members, or using BTs Netprotect which is free with some broadband packages. This has been known to make computers run more slowly though.
That is all you need.
If you have any problems, then please return here.
If you have any problems with BT Infinity, then please visit the Infinity board on this forum.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help with setting a MDX goal expression in SSAS

Our data is updated monthly and the last date of available data can be anywhere from 45-75 days behind. For example, data is current through 6/30/2014
as of 8/25/2014.
I have a Time dimension hierarchy named [Calendar] with [Year]>[Half Year]>[Quarter]>[Month]>[Date]
I have a measure, [Measures].[Fatalities] set as a calculated member.
I have a KPI with [Measures].[Fatalities] set as the Value Expression. My issue is with setting up the goal expression.
I am trying to set a goal expression that is a percent reduction for a 5-year baseline average (Year-7:Year-3). So for the current year (2014, with data through
June 2014), the goal would be a 20% reduction of the average of the Jan-Jun 2007, Jan-Jun 2008,Jan-Jun 2009,Jan-Jun 2010,Jan-Jun 2011.
I have set up the following MDX as the goal expression:
.8*((
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],7,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],6,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],5,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],4,[Time].[Calendar].CurrentMember))
+
([Measures].[Fatalities],
PARALLELPERIOD([Time].[Calendar].[Year],3,[Time].[Calendar].CurrentMember))
)/5
The problem is that the goal is taking the entire year average at the year level of the Calendar hierarchy. For example, in the attached screenshot, the
Fatalities Goal would be empty when the fatalities is empty, and more importantly, the goal at the Year level of the Calendar hierarchy would only be the sum of Jan-Jun goal. The Fatalities Goal in this example should read 549.28 at the Calendar 2014
Year level and the status would still be green.
http://i.imgur.com/peHD9Wl.png

you might find this app interesting: http://ivolume.en.softonic.com/mac.

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

How to set up Time Capsule as an additional network

I have the 1 TB Time Capsule and I set it up as "creating a wireless network". It is connected via Ethernet to my linksys router. How do I set it up so that I have two wi-fi networks running? Options are a) join a wireless network b) connect to a network using Ethernet to extend the network or create a second network.

When you say faster speed, are you taking about using the 802.11n 5GHz protocols?
If that is the case, then you arrange for the TimeCapsule to join the existing network, and configure it to "Bridge" the ethernet to WiFi.
My assumption is that the other WiFi is 802.11g, so leave that one alone.
Back on the TimeCapsule, you configure it so it using 5GHz frequences ONLY.
You configure TC so it has its own SSID (network name).
Now Macs (or other systems) that are 802.11n WiFi capable can connect to the TC network name (SSID), and your older 802.11g devices can use the other WiFi base station.
If the TimeCapsule is a dual radio system, then you can configure the 2.4GHz radio so that it uses the same SSID and password as your existing WiFi base station, only have it use a different channel (you do not what the original and the TC 802.11g radio fighting over the same channel. Channels 1, 6, and 11 are best, but if you have conflicts with neighbors, try for something that doesn't conflict and is 5 or more channels away from your other 802.11g base station.

Joining time capsule to existing wireless network

I want to back up my computer to time capsule
My time capsule was previously set up as my own wireless base station, with ethernet cord plugged in.
I'm currently staying in a house with it's own wireless router/network, and I just want to use the time capsule to back up through the house network, not as its own base station. How do I join it to the existing wireless network and set it up for time machine backups?
thanks

Are you able to log onto to the old wireless network that the Time Capsule is providing and open AirPort Utility - Manual Setup?
Macintosh HD > Applications > Utilities > AirPort Utility
If yes,
Click the Wireless tab just below the row of icons
Write down all of the current settings for safekeeping.
Then, make these changes:
Wireless Mode = Join a wireless network. If you do not see this choice, hold down the option key on your Mac while you click on the selection box
Wireless Network Name = Name of the network you want to join
Wireless Security = WPA2 Personal
Wireless Password = Wireless Password
Confirm Password
Click Update to save settings. The Time Capsule will disappear from AirPort Utility, so close AirPort Utility. After 30-40 seconds, the Time Capsules should have a green light.
You'll need to reset Time Machine so it can find the Time Capsule
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backups
That should get you going.
Message was edited by: Bob Timmons

Can Time Capsule Join Existing Wireless Network?

I currently work in a building with a wireless network. In my own office, I use AX to join that wireless network and I connect a local printer to the USB port.
From some posts, I've gotten the idea that the Time Capsule will not join an existing wireless network.
Is that the case?

That is correct - Time Capsule cannot be configured to function as a wireless client on an existing wireless network. The only Apple Airport product currently able to do that is the Airport Express device.
It can be configured as a remote base station in a wireless distribution system (WDS), but this would require the wireless network's main base station to be another Time Capsule or any model of Airport Extreme base station.

Help with setting up Tiem Capsule on existing DSL network

Similar Messages

Maybe you are looking for