Help with setup for roaming on 3502 and 1252

Hello everyone, I have a bit suggest about setting up roaming without having it connect different SSID. I figuring when I was at Rochester Institute of Technology college when I walk in hall, I seen my phone wifi signal was never disconnected but seen 1142 (I figured it out what design look like) change from green to blue in every location. My major is Information & Computing Studies at NTID.
My current setup at home:
1. Internet to Untangle Firewall to Cisco Catalyst Express 500 with PoE to two 3502i at home
2. Cisco Catalyst Express 500 to Cisco Catalyst Express 500 with PoE to two 1252 at garage
3. 3502i and 1252 are running Autonomous IOS or Standalone
And also we have smartphones, apple ipads and iphones, and a laptops.
I want to set the same SSID so they should automatically connect via roaming to any location like RIT and even dual band should work too. I do not have Virtual WLC or Windows Server (I should get Windows Server 2008 R2 or 2012 from RIT and I can download virtual WLC too). Will it work without WLC and server?
In case, If it is not possible without WLC then I would like to know what requirement list so I can add to that to make it work.

Gage Burchett wrote:Stephen, All of these AP are running WPA2-PSK AES + WPA-PSK TKIP (Cipher AES CCMP + TKIP) with same passhrase and same SSID. Any channel still work? Isn't 802.1x can be used with Windows Server that have RADIUS? Are you sure I leave these same configuration so it will roaming itself or client?
I would stick with channels 1/6/11, those are the standard non overlapping channels for the 2.4GHz side. For 5GHz, any channel you pick should work as the channels in 5GHz do not overlap.
And yes, so long as the SSID, PSK and VLAN mapping (if you are doing sub-interfaces) are the same, and there is some overlapping of the AP signals, your clients should roam between the AP just fine.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

Help with setup for live streaming

I'm trying to set up a live stream that's viewable on my
website.
I have two machines behind a router with one being the
webserver running FMS (windows 2003) and the other being the
encoding machine running FME (windows XP).
When I set up FME, I put in the following as the url to the
server "rtmp://
computernamewebserver/live/" with the session name being
"test".
This has no problems connecting to FMS .
On the webserver/FMS, I created a *.swf file which basically
contains just a flvplayback object with the URL set to "rtmp://
computernamewebserver/live/test".
Now after I publish this, I can view the video via the
published html file from within the network, but when I try outside
of the network, it doesn't work and I get no error messages so it's
hard to debug.
I have port 80 forwarded to my webserver/FMS machine. I tried
forwarding port 1935 to both my webserver/FMS machine and the FME
machine with no success.
I've tried playing around with the rtmp URL by changing the
computernamewebserver from the internally recognized
computer name to the externally recognized URL to my webserver.
The solution is probably something simple, but since this is
my first attempt at flash streaming, it's not obvious to me and
I've tried searching for the solution. My suspicion is that there's
some config file somewhere that I need to config that I don't know
about or maybe it's some port issue. Neither of my machines have
windows based firewall disabled.

"Now after I publish this, I can view the video..." Well this
shows that FMS is working fine, so I am guessing that it is an
outside network issue.
"Neither of my machines have windows based firewall disabled.
" I don't know if this is the cause either, as a host based
firewall should prevent any connections from arriving, either by
the internal lan or the external (well, at least I think that is
the case, I dont know if windows still allows hosts on the same
subnet to have local lan permissions or what they do with their
crazy security model. That said it shouldn't be a problem.)
I would try to just telnet to the port that you have open to
make sure the connection can be established.
telnet computernamewebserver 1935 (this should open up a
socket, otherwise your port forwarding isnt working correctly.)
If telnet works ok, perhaps its an issue with the swf. I
would code the minimal things needed to just get a stream playing
from the external network (perhaps just using the vod service, not
the live, to make things simple).
Hope that helps.

I have searched for solutions to the error 13019, but everyone with the problem doe'st manually manage their music like I do. I really don't want to have to sync and gothrough that mess. Help? solution for manually managing videos and music!!

I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!

- Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
Apple Retail Store - Genius Bar
you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?

I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why can't i pay with ideal for my skypenumber? and...

why can't i pay with ideal for my skypenumber? and without notifications up front!
number

Hi ronhermes,
I hope you're having a lovely vacation!
I think it may just be a matter of completing your our purchase through the US Adobe Store (not the Adobe Store in Greece). For more information, see "Are there any workarounds?" in this document.
Best,
Sara

Need Help with Zen for Servers 7.0 Inventory & Policies

I have Zen 7.0 for Servers installed on NW 6.5 box. I have installed the
Inventory agents on another 6.5 box. The Inventory database indicates it
is empty. I am not sure where to begin to troubleshoot this. I am sure
I am missing something.....but what....is the question.
Are there any documents out there that lists steps to troubleshoot this?
I also get a message on the server with the Inv database that the
dictionary files are setup to be updated by itself. How do I keep that
message from happening. I thought I needed to place the ip address of
the server that will be providing dictionary updates in the field which
is what I did but, it causes the above message.
Thanks in advance,
TJ

Thanks for the reply Steve. I will give it a try.
> OK, i can help..i think. I've just set up ZFS. Monitoring bit was
pretty
> easy and straight forward. Inventory on the other hand was a real pain
in
> the arse until i cracked it.
>
> 1. Don't worry about the dictionary error. The only way to stop this is
to
> have a separate policy for the Inv server and don't enable the
dictionary
> update.
>
> 2. ***Most important piece*** It doesn't really state it in the docs,
but i
> kept seeing it in posts. The key to getting inventory working is to get
TED
> working first. Once you have TED working then it all falls into place.
>
> 3. I'm not sure if this is important but i read somewhere in a TID that
the
> ZFS Service Location Package (a policy obj) should reside in the same
OU as
> the ZFS server.
>
> 4. I had manually created a TED distribution and channel which didn't
seem
> to work but when i created one using the wizard it all started
> working...strange. Given this, i have now created a distribution and
channel
> that pushes a single file (which i called zfsinitial.txt) out to all
> subscribers. This basically activates everything, copies all the
required
> certifcates around etc, etc
>
> 5. As well as this initialisation distribution i have my policy
> distribution\channel that has all the Inventory settings in it
(location,
> schedule etc). I have assigned both of these to a subscriber group.
>
> once i got all this working, the subscribers and inv agents started
sending
> stuff to the Inv DB and the Distributor. The database is then
> populated...viola
>
> <[email protected]> wrote in message
> news:[email protected]...
> >I have Zen 7.0 for Servers installed on NW 6.5 box. I have installed
the
> > Inventory agents on another 6.5 box. The Inventory database
indicates it
> > is empty. I am not sure where to begin to troubleshoot this. I am
sure
> > I am missing something.....but what....is the question.
> >
> > Are there any documents out there that lists steps to troubleshoot
this?
> >
> > I also get a message on the server with the Inv database that the
> > dictionary files are setup to be updated by itself. How do I keep
that
> > message from happening. I thought I needed to place the ip address of
> > the server that will be providing dictionary updates in the field
which
> > is what I did but, it causes the above message.
> >
> > Thanks in advance,
> > TJ
>
>

Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

Hi all,
we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
Exchange Server.
We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
Timestamp Sender Recipients MessageSubject
25.02.2015 16:48:52 [email protected].. {}
25.02.2015 17:04:43 [email protected].. {}
25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
25.02.2015 17:13:45 [email protected].. {}
25.02.2015 17:13:55 [email protected].. {}
We can still reproduce the issue on different Mac computers.
Thanks for any help in advance!
Thanks and best regards
Reto

Here is the mailheader form the successfully sent email:
Date: Wed, 25 Feb 2015 17:08:25 +0100
Subject: test 3
From: sender <[email protected]>
To: "'[email protected]'" <[email protected]>
This mailheader is from an email which was not sent out:
User-Agent: Microsoft-MacOutlook/15.6.0.150113
Date: Wed, 25 Feb 2015 16:48:52 +0100
Subject: test 1
From: sender <[email protected]>
To: [email protected] <[email protected]>
Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

I need help with my for loop in this array

Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
    public static void main (String[] args)
        String timeStr;
        int time, again, optiStr;
        Inbound[] in = new Inbound[25];
         in[0]=new Inbound ("",0,"On Time num0");
         in[1]=new Inbound ("",2,"On Time num1");
         in[2]=new Inbound ("",3,"Delayed num2");
         in[3]=new Inbound ("",4,"On Time");
         in[4]=new Inbound ("",5,"On Time");
         in[5]=new Inbound ("",6,"Canceled");
         in[6]=new Inbound ("",1,"Canceled num6");
         in[7]=new Inbound ("",8,"On Time");
         in[8]=new Inbound ("",9,"Delayed");
         in[9]=new Inbound ("",10,"On Time");
         in[10]=new Inbound ("",11,"Delayed");
         in[11]=new Inbound ("",12,"On Time");
         in[12]=new Inbound ("",13,"Delayed");
         in[13]=new Inbound ("",14,"On Time");
         in[14]=new Inbound ("",15,"On Time");
         in[15]=new Inbound ("",16,"On Time");
         in[16]=new Inbound ("",17,"Canceled");
         in[17]=new Inbound ("",18,"On Time");
         in[18]=new Inbound ("",19,"On Time");
         in[19]=new Inbound ("",20,"Canceled");
         in[20]=new Inbound ("",21,"On Time");
         in[21]=new Inbound ("",22,"Delayed");
         in[22]=new Inbound ("",23,"On Time");
         in[23]=new Inbound ("",24,"Cancled");
         in[24]=new Inbound ("",7,"On Time num24");
        do{
            timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
            time = Integer.parseInt(timeStr);
            if (time<=0 || time>24)
             JOptionPane.showMessageDialog (null, "Error");
             optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
            if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
                for (int index = 0; index < in.length; index++)
                  if ( time == Inbound.getTime())
               JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
//               else JOptionPane.showMessageDialog (null, "else");
            }//temp return else if failed to find time asked for
//             else
//               if (optiStr==JOptionPane.CANCEL_OPTION)
//                 JOptionPane.showMessageDialog(null,"Canceled");
//              else
//                {Outbound.run();
//                JOptionPane.showMessageDialog (null, "outbound");}//temp
              again=JOptionPane.showConfirmDialog(null, "Try again?");
        while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.

rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM

Help with Quicktime for Windows 7 64-bit

I am having a problem with the latest version of Quicktime for Windows. When I launch Quicktime and then 'click' on any icon for download I can see the sentence, "Connecting to iTunes" and then I am redirected to download iTunes... Problem is that I already have iTunes.
Windows 7 Ultimate 64-bit SP1 and up to date.
iTunes version 11.1.3.8
Quicktime version 7.74.80.86
I Unibstalled both products, using the guide provided from Apple. I, then downloaded and installed iTunes first, then I downloaded Quicktime and installed it. I had the same issue. Next, I went to Control Panel/ "programs and Features, used the "change" option and clicked "repair". I did this for both iTunes and Quicktime. They ran fine. No error messages, nothing in event logs, no trace of an install log to try to diagnose this myself. Does anyone have this problem, or can anyone help me to start the diagnosis necessary to solve this?
Second issue came to light after all of the steps I performed; Before, I would conect my iPhone to a USB port and iTunes would launch automatically. Now, it does not. I see my 4s in devices and I see a normal state using device manager. So, I went to "Default Programs" and selected my 4s and the dropdown window no longer has an option for iTunes. However, when I go to choose a default program for audeo, etc. the dropdown mwnu has an option for iTunes.
Thanks for reading and I would like some help.
Doug Shreve

I found the problem and the solution. In Internet Explorer ver 11 / manage plugin's, make sure that the Apple plugin's are enabled. My setings were incorrect, the plugin ws siabled. Enabled it and all is well!

Need help with my iTunes on iPhone 5 and Macbook Pro

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

Need Help with Navigation for an Online Art Gallery

I am trying to create a web site for an online art gallery.
I am new to DW8 and I have been reading several books,
forums, etc trying to figure out how to build a simple and elegant
navigation system.
I have successfully built simple navigation using a frame set
as the index.html page. I have successfully built and incorporated
the art gallery using Photo Assist (Photo Assist is a DW8 extension
that creates photo albums using AJAX). The gallery.html page built
with Photo Assist has thumbnail browsing and a slideshow mechanism.
Photo Assist also uses CSS that I have been able to modify for my
personal tastes in terms of creating a simple and elegant user
interface for the gallery section of the web site.
My index.html frame set consists of navFrame.html and
mainDisplayFrame.html pages. I created a navigation button (using
Fireworks 8) that links the gallery.html as its source and targets
mainDisplayframe.html.
My plan was to just add about 5 or 6 more navigation buttons
and target the mainDisplayFrame.html from each navigation button to
display some static information.I think the site looks fairly good
except that the frame set requires scroll bars when browsed with
800 x 600 screen resolutions. I thought that I could just use
'layers' instead of a frame set, but there is not a "target"
mechanism when usings layers.
At the end of the day, I would prefer to just use one web
page for displaying the navigation and all of my other web pages
including the gallery.html page. I think I have the right idea but
I can't seem to get a good handle on a navigation system that is
better than a frame set.
My online art gallery that is under construction is:
http://www.andrew.cmu.edu/user/tburak/
Photo Assist 1.0.1 DW extension URL is:
http://www.webassist.com/professional/products/productdetails.asp?PID=108
Please note that I am not a web designer that has deep
knowledge of HTML, CSS, javascript, server side stuff, etc. I do
know a little bit about C++ and Java programming and a little bit
about html tags, and also a little bit about how CSS works. Beyond
that, I am pretty much a point and click type of web page builder.
My real expertise is more or less on photographing and digitizing
the art.
I should mention that I eventually want to build in PayPal
eCommerce if at all possible, but I realize I might not have the
skills to do so.
Any help, suggestions and comments are very much
appreciated.

[discussion moved to LiveCycle Forms forum.]

Where can I get help with Office for Mac

Hi everyone,
I use Microsoft Office for Windows at work, and often go to one of the groups at msnews.microsoft.com to ask questions and get help. I would like to be able to check from home to see if anyone has answered my questions, but I can't figure out how to access this from my Mac. Do I need special software for this? At work I use Outlook Express. What should I use from my Mac?
Thank you,
Rob

Many of those groups can also be accessed on the web with any web browser via http://groups.google.com/
There are several NNTP news readers like Newswatcher and MT Newswatcher on http://www.versiontracker.com/ and http://www.macupdate.com/ which tie into that newsgroup protocol if your internet service provider supports it.

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Help with setup for roaming on 3502 and 1252

Similar Messages

Maybe you are looking for