Help with Sleepwatcher display wake - 10.8.3?

Hello all,
I have installed Sleepwatcher using Macports on my 10.8.3 computer, following this guide pulled from this post (https://discussions.apple.com/message/17966344#17966344):
MacPorts is one of the most effective and simplest ways to install Terminal based add-ons. First, of course, install MacPorts, which is as easy as downloading a package and running it. To install Sleepwatcher via MacPorts, simply type in the command line:
sudo port install sleepwatcher
then type: sudo port load sleepwatcher
Sleepwatcher will then automatically be installed and loaded.
2. You need to actually convert your AppleScripts into a Shell Script (they are not the same). The way to do this is to load it into the .sleep or .wakeup script that you desire to be placed in your Home folder. The way to do this is to do the following:
To Create a Script to be Run When Your Computer Goes to Sleep/Wakes Up:
a.) type in a new Terminal Window:
cat > $HOME/.wakeup
then
#!/bin/sh
b.) The next thing to understand is that you can run Applescripts through Terminal, via something called osascript, which is a command given within the Terminal. If your Applescript is fairly simple (just ejecting a disk or opening a new Finder window), I would go ahead and write that in osascript language. To gain a better idea of what that means, go to this website. However, it looks like you've saved your Applescript as a file. This next solution might be a little bit simpler. The following will help you just run your Applescript from the file you've saved it as (assuming it is a .scpt or something).
After typing the above commands, type: osascript followed by a space. Then drag your Applescript file to the Terminal window. Thus, your command should look something like: osascript /path/to/desired/script
c.) Hit enter.
d.) Hit ^D (Ctrl-D)
e.) Then type chmod +x $HOME/.wakeup
This worked great for me.
But, what I want is to run a simple Applescript on display wake. However, right now, the daemon only runs on wake from sleep, not wake from display sleep. How do I make it run on wake from display sleep? I can do it in the terminal, but I can't for the life of me figure out how to do it using the launchdaemon.
Any help you could offer would be great. Thank you!

no one has replied me too got this issue ,

Similar Messages

MacBook Pro with Retina Display Wakes Up By Itself

My MacBook Pro with Retina display wakes up by itself on battery sometime with reason "EC.PME (User)".
Any idea what is that? and what causes it?
Regards
Andrew

I have had my new rMBP 13" do this twice over the last 2 weeks. its only 3 weeks old. Take it out of my bag after closing the lid and putting it to sleep to find the screen blank and the fans running at full blast. only way to stop it is to hold the power key down till it re-boots. I would like to know why this is happening too.
Macbook Pro Retina, 13 inch, Early 2013 model.
regards
Tony

Help with CRT display...

Hi all...
I'm facing a nasty problem connecting an external crt display to my MacBook Pro.
First here's the setup:
-Two MacBook Pro 2.4 GHz
-G4 Cube 450MHz
-iBook G3 800MHz
-CRT DPRO750SB 17" (Nec-Mitsubishi)
-CRT AT897D-1 17" (Formac)
-Problem:
I used to connect the DPRO750SB to one MBP with the Apple's DVI/VGA adapter and everything was fine but now the display doesn't light up anymore.
Furthermore, trying to boot with the display hooked up make the computer crash during startup.
-Clues:
The display and its VGA cable seems OK since there is no problem with the G4 Cube (VGA to VGA) nor the iBook (mini-DVI/VGA).
I have no problem using the Formac Display with both MBP (DVI/VGA).
The DPRO750SB icc profile don't show up anymore in the "Displays" Preference Pane.
I'm able to get the DPRO working sometimes by plug the Formac in, unplug it, then plug the DPRO in.
(in this case, the "Displays" Pref Pane says it's the Formac).
I'm really lost now...
Any help would be greatly appreciated...
Thanks
Fabrice

Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto

Quick help with css display in IE7

Hi, I haven't been on this forum in ages - I have a slight display glitch would love some help with:
http://magma.ie/magmablog-html/index.html
It looks great in the latest and greatest browser (IMHO!): - firefox 3.5.6
http://cl.ly/17cD
but IE7 pops the search field in the sidebar off to the right, at least, according to browsershots.org
http://cl.ly/1A1f
Thanks, H

It looks OK in IE8 but IE7 is having trouble with the #Sidebar width.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Need Help with Address Display

I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
Andrew

The example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                    employee_id
             THEN NULL
          ELSE employee_name
       END employee_name,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                      employee_id
             THEN NULL
          ELSE employee_id
       END employee_id,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                            employee_id
             THEN NULL
          ELSE accounting_department
       END accounting_department,
       street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek

Help with XML, display data on swipe/click

Hello.
I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
stop();
var nameArray:Array = new Array();
var countryArray:Array = new Array();
var portraitArray:Array = new Array();
var flagArray:Array = new Array();
var jobtitleArray:Array = new Array();
var imageNum:Number=0;
var totalImages:Number;
//Load XML
var XMLURLLoader:URLLoader = new URLLoader();
XMLURLLoader.load(new URLRequest("recbook.xml"));
XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(event:Event):void {
var theXMLData:XML = new XML(XMLURLLoader.data);
totalImages=theXMLData.name.length();
for (var i:Number =0; i < totalImages; i++){
//push xml data into the arrays
nameArray.push(theXMLData.name[i]);
countryArray.push(theXMLData.country[i]);
portraitArray.push(theXMLData.portrait[i]);
flagArray.push(theXMLData.flag[i]);
jobtitleArray.push(theXMLData.jobtitle[i]);
//data is processed
loadData();
function loadData():void {
var thisPortrait:String = portraitArray[imageNum];
var thisCountry:String = countryArray[imageNum];
var thisName:String = nameArray[imageNum];
var thisJobtitle:String = jobtitleArray[imageNum];
var thisFlag:String = flagArray[imageNum];
var dataLoader:Loader = new Loader();
dataLoader.load(new URLRequest(portraitArray[imageNum]));
dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
function dataLoaded(event:Event):void {
//I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
   portraitUILoader.source=thisPortrait;
   flagUILoader.source=thisFlag;
   selectedName.text=thisName;
   selectedCountry.text=thisCountry;
   selectedJobtitle.text=thisJobtitle;
//add to imageNum (1);
imageNum++;
if (imageNum < totalImages) {//stopping at img2
trace("imageNum " + imageNum);
trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
loadData();
trace("Total Images " + totalImages);
//click to move past the home screenI'd like to ditch this. don't know how.
homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
function goNext(event:MouseEvent):void
nextFrame();
*/here's the output:
imageNum 1
image name (thisPortrait) images/img1.jpg
imageNum 2
image name (thisPortrait) images/img2.jpg
imageNum 3
image name (thisPortrait) images/img3.jpg
Total Images 4
Total Images 4
Total Images 4
Total Images 4
It starts the display on image 1 (the second in the series img2.jpg)*/

Thank you.
That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
new output after moving the increment:
imageNum 0
image name (thisPortrait) images/img1.jpg
imageNum 1
image name (thisPortrait) images/img2.jpg
imageNum 2
image name (thisPortrait) images/img3.jpg
imageNum 3
image name (thisPortrait) images/img4.jpg
TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()

Help with Conditional Display and Validation

Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
    v_start_date    work_items.start_date%TYPE;
    v_end_date      work_items.end_date%TYPE;
BEGIN
    SELECT start_date
          ,end_date
    INTO   v_start_date
          ,v_end_date
    FROM   work_items
    WHERE work_items_id = :P51_WORK_ITEMS_ID;
    IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
          :P51_CHANGE_REASON IS NULL ) THEN
        RETURN 'Change Reason must have a value';
    END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
Joe

Phil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe

Help with video display!!

Hello all,
After installing the 41.09 drivers for my MSI GF4200 64mb card, I noticed that upon DVD or any video file playback, I only see about one quarter of the video, which is the upper right hand corner. I do not know if the problem started with the installation of this driver as I have not tried to view video in awhile until after installing this driver. Previously I believe I had 4072 and the original drivers in. So, I reinstalled the original drivers and I am still having the same problem. I ran my direct x diag tool and I passed all of them.
Another strange part of this is the fact that after I play with the display settings, the problem seems to be fixed. But when I close the program, and reopen the video file the problem recoccurs again.
I do not have any other video problems that I know of, but I will go run Battlefield 1942 (intense gfx) to see how I fare. If anyone has any suggestions or ideas, please share as this is really starting to bug me. Thanks for your help in advance!
twanto

Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto

Help with external displays

Just installed Lion and afterward I noticed that things work differently with external displays. In the past I could have my laptop open to mirror but now it must be shut and the mirrior button or selection isn't available within the display preferences. So my question is, 1. does any one know how to better manage displays? and 2. does anyone know how to mirror while having the laptop screen open?
I know trhis sounds petty but where I work it is very hot and it seems like with the screen shut the computer syncs heat away a lot less efficiently.
Thanks

Thanks,
I now know how to turn on and off mirrioring with command/F1 (didn't know that yet), but would you know how I can use my external display in mirror mode with the laptop display completely turned off, not dimmed till black, but off?
Before lion I was able to do this by shutting the laptop screen which would put the machine into sleep mode and then by clicking the mouse or hitting a key on the keyboard it would wake it. Once the external display came on then I would open the laptop and the laptop display would remain off while using the external display. Hope that makes sense. Any suggestions?

Search Help with Structure Display

Hi,
I want to create a search help which should display my output in the structure format base on the different levels.
I have already written a test program which display all the values in proper structure format. But I wanna do the same in the search help. It has to display the output in the structure format.
Please guide me how to achieve this.
Thanks,
Karthik

hello,
you could write additional report based on ALV tree. So you would have the stucture which you want to have and on value request call your custom program. i doubt that there is FM or class which could generate search help tree. So basically you have to write your own logic. Or you could use GuiXt tool. Example and tutorial.
http://www.synactive.com/tutor_e/lessonco00.html
br,
dez_

Please help with a display problem.

I plugged in an external projector. It is now disconnected but I can't get the screen to return to normal. Help please.

1. Attempt to put the system to sleep and wake it back up and see if that doesn't correct the issue
(Command + Option+ Eject)
2. If that doesn't work Click on the  in the upper left hand corner of the display and go to system preferences and check your display settings there.
3. If that doesn't work attempt to restart the machine with the projector not connected
I hope this helps!
GL!

Dual Display - help with Cinema Display for MacBook Pro where MB won't detect displays.

I just got a Cinema Display (a1081 20") ("CD") off eBay to use as a dual screen with my Macbook Pro OS X 10.6.8 ("MB"). However, I can't get MB to recognize CD! I've tried power cycling both the MB and the CD with and without USB cord connected. MB won't recognize CD display in any situation. However, it is recognized in some capacity although I can't use dual display because the CD power button triggers MB to ask me if I want to restart, shutdown, or cancel.
Any help is appreciated!!

Have you tried smc and pram resets?
Try Detect Displays in the Displays preference pane.
Does the Displays preference pane Arrangement show two screens? If so do click gather windows and check the resolution setting of the new screen.

Need help with Firefox display issue on one page of site

I have a page that W3C validates, displays properly in IE and Netscape, but does not display properly in Firefox. The issue is with a style class applied to the inner centered table. class= "vert_table" This class works on all of the other pages in the site, but not in this one.
The page:
http://www.redshift.com/~lorac/sdy-46-49.html
The issue:
< table class="vert_table" width="760" border="0" cellspacing="0" cellpadding="0" align="center" bgcolor="#f1ebe8" >
The vertical rule does not display, and further down the page a dark left-right border appears starting with this text.
my mother, when I was wasting my life away not knowing who I was,
and ends with:
Mojin: (hugging him) I don't expect you to love me. I just want you to live, that's all.
I have been looking through this code for two days, searching for any offending omission in code or redundancy that would break the page. I've searched for missing div tags but none are apparent to me. I'm hoping someone with fresh eyes can spot it right away.
It's odd that the page validates but Firefox cannot display it properly.
Sample page of code working properly:
http://www.redshift.com/~lorac/sdy-41-45.html
Any help is appreciated.

Hi Jim, thanks for the reply. Your suggestions sound interesting but I'd like to figure out why this particular page doesn't work when all of the others do. I'm sure it's just a little code thing that I'm overlooking.
I could revert back to a saved page, but I updated text and images on this page before the verticle border broke, so I don't want to lose those edits. And that is why I'd like to fix this one instead of redesigning the page.
BTW, I forgot to mention in my first post, GoLive CS, W2K.

Help with a display laptop.

So I went to best buy tonight and got a new laptop. The only one left was the display model which was ok since it was in good shape. Problem is I get home and it's in demo mode and I can't figure out how to reset it or get rid of the demo mode setting. Any help would be appreciated. Thanks.

No... Its not.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Help with Game Display structure and adding independant objects

I'd like to do two things and I'm not sure how to set up the code.
1) Add 1 to n enemies that think and move on their own. Basically their own threaded life I think.
2) Add 1 to n weapons fire that when the thread is finished apply the damage.
Currently I'm only using Graphics2d to draw everything to an off screen image. The issue I have is that most of the individual object stuff is wrapped up in the main game loop rather than added to the object itself.
Here is my current working pseudo code: I have this working but seems like I need to make it more flexible. Just not sure how.
public class combatDisplay extends JPanel{
@Override
protected void paintComponent(Graphics g){
     creates Graphics2d offScreenImage
     wipeClean offScreenImage
     drawPlayers 0 to n
     drawSpaceShip 0 to n --> drawMe(offScreenImage);
     drawWeaponShots 0 to n
     drawExplosions 0 to n
     draw offScreenImage to panel
public void setPlayers (ArrayList al) {}
public void setObjects (ArrayList al) {}
public void setSpaceShips (ArrayList al) {}
public void setWeaponShots (ArrayList al) {}
public void setExplosions (ArrayList al) {}
class Spaceship{
     Point location
     Polygon shape
public void drawMe (BufferedImage bf){
     draw Polygon
class WeaponShot{
     Point location
     Polygon shape
public void drawMe (BufferedImage bf){
     draw Polygon
class GameLogicLoop {
     movePlayer
     moveEnemies
     fireWeapons
        applyDamage
}It seems like I should just spawn an enemy thread that checks its own ranges and does its own movements. But I'm not sure how to get that to display the offscreen image. Can an arraylist hold a thread?
Likewise, with the weapons fire.... it should be self contained to check hit, display itself, display explosion or hit, then apply damage to its target when animation is completed. These two seem like a similar code structure I'm just not sure how to set it up yet.
Any psuedocode would be helpful.

Morgalr,
Awesome responses thanks. Normally I don't code so it is an interesting (read hard) learning curve for me. Usually I just design and hire someone smarter than me to code.
If you don't mind taking a look, I tried reworking everything toward the approach we have been discussing. If you see anything glaring and troublesome, please yell.
Ship Class is its own thread that can paint itself. Basically it is a sitting ship.
DisplayPane is the image painting class.
loopGame tells the objects when to paint and passes the image reference around.
package controller;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Point;
import java.awt.Polygon;
import java.awt.image.BufferedImage;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class Controller extends JFrame {
    DisplayPane pane;
    Ship satallite;
   public Controller(){
        setTitle("Controller");
        setBounds(0,0, 400, 400);
        setLayout(null); //absolute position
        setResizable(false);
        pane = new DisplayPane(getBounds().width, getBounds().height);
        add(pane);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setLocationRelativeTo(null);
        setVisible(true);
   class DisplayPane extends JPanel{
       BufferedImage offImage;
       public DisplayPane(int width, int height){
           offImage = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);
           setBounds(0, 0, width, height);
       @Override
       protected void paintComponent(Graphics g){
            g.drawImage(offImage,0,0,this);
       public BufferedImage getImage(){
           return offImage;
       public void setImage(BufferedImage tempImage){
           offImage = tempImage;
       public void wipeImage(){
            Graphics2D big = offImage.createGraphics();
            big.setColor(Color.BLACK);
            big.fillRect(0, 0, getBounds().width, getBounds().height);
   class Ship implements Runnable{
       Thread thread;
       int speedStep;
       boolean bAlive = true;
       Point point = new Point(0,0);
       public Ship(String shipName, int speed){
           thread = new Thread(this, shipName);
           speedStep = speed;
           point.x = (int) ((int) 300 * Math.random());
           point.y = (int) ((int) 300 * Math.random());
       public void start(){
           thread.start();
       public void kill(){
           bAlive = false;
       public void drawShip(BufferedImage tempImage){
            Graphics2D big = tempImage.createGraphics();
            int[] pXfrigate = {point.x, point.x-4, point.x-4, point.x+4, point.x+4};
            int[] pYfrigate = {point.y, point.y+7, point.y+17, point.y+17, point.y+7};
            Polygon frigateShape = new Polygon(pXfrigate, pYfrigate, 5);
            Polygon currentShip = frigateShape;
            big.setColor(Color.GRAY);
            big.fillPolygon(currentShip);
            big.setColor(Color.RED);
            big.drawPolygon(currentShip);
       public void run() {
           int delay = 500;
           while (bAlive){
               try{
                   System.out.println(thread.getName()+" x: "+point.x+" y: "+point.y);
                   Thread.currentThread().sleep(delay);
               }catch (Exception e){}
   public void loopGame(){
        satallite = new Ship("Dot", 0);
        satallite.start();
        while (isVisible()){
            pane.wipeImage();
            satallite.drawShip(pane.getImage());
            pane.repaint();
            try{
                Thread.sleep(0);
            }catch (Exception e){}
            satallite.kill();
        System.exit(0);
   public static void main(String[] args) {
        Controller control = new Controller();
        control.loopGame();
}

Help with Sleepwatcher display wake - 10.8.3?

Similar Messages

Maybe you are looking for