Help with something

Allright, I like to play games, and I play them wireless on a network with a  router. It's a WRT54GS. The problem I have is that my stupid sibling likes to use a "netbook" to go on sites downloading viruses (of which has happened several times).
This causes inevitable lag in my games and I have lower connection bars when other people are online.
I configured the router so have access to it's settings, is there a way to deny access to the router for the other stuff when I'm online or vastly reduce their share of the connection.
Thanks

Well in this case you case i think you can set QOS service, on your router and you can Lower down the Internet connection to that Computer. To enable QOS service, you need to login to your router setup page, and click on "Application and Gaming" tab and below you need to Click on the Sub tab "QOS" and under QOS you need Click "Enable" and under "Device Priority" input your Computers name and under Priority select "LOW" and input the MAC address of that computer and click on Save Settings. This will lower down the Internet Speed on that Computer.

Similar Messages

  • I have need help with something Please respond Quickly :)

    I have need help with something Please respond Quickly  ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
    $$Cgibbons$$

    Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
    $$Cgibbons$$

  • I need help with something could some one help me with installing windows 7 on bootcamp 4.0 with iMac 2.8 ghz model

    could some one help me with something important i have a 2.8 ghz intel quad core Imac with 10.7 with bootcamp 4.0 but still getting that black screen while trying finish the install of windows 7 etc. or do i need a new mac for it to work properly

    This might help point you in the right direction.
    http://support.apple.com/kb/HT4818
    Hope it helps
    Also google it and lots of results come up including youtube clips....

  • Need help with something...

    Hey guys, need some help with this, try to keep up with me here...
    I opened up illustrator cs4 and drew individual items (three items) and drew all three on one artboard and saved it as a standard .AI file.
    On each of the three items, one at a time I used the selection tool and selected each one and went to Edit>Copy in Illustrator.
    Opened photoshop cs4 and set up a new blank document letter size, in photoshop cs4 went to Edit>Paste and I pasted each item as pixels into photoshop. Keep in mind that each of these individual items I have pasted are obviously vector images. After placing the Illustrator files (that are now pixels in photoshop) I saved everything as .TIFF format in photoshop.
    Opened up InDesign and opened the TIFF file I just saved and placed it in InDesign as a TIFF file (raster).
    My question is a format question, now that I have images that I drew from Illustrator in a Photoshop TIFF file that has been put into InDesign, if I sent this to a printer would it print properly as I see it now? I ask this because I know in the past you guys have said that vector will not print unless it is in Adobe PDF. Did I do this right or should I have saved the three Illustrator images separately as Adobe PDF files and just placed them as individual objects in InDesign?

    I remember Jongware, it's come in handy!
    Peter, I think bridging these files from one program to another just confuses me. What I guess I was thinking was I could create the single files in Illustrator and drop them as pixels into photoshop because then I could impose them in front of my backdrop (I created a backdrop with other images in photoshop) and thought it would be easier to just save it all as a TIFF file and place it in InDesign. So when I copied/pasted from Illustrator into photoshop, when I chose place as pixels it rasterized a vector image am I thinking right? Truthfully, I just don't know what I'm doing and trying to do it out of convenience. The end result I always try to do is make sure it shows up right in print with no less than 180 resolution because its' hard to find stock photos on the web without a watermark or decent resolution.
    Eugene, I knew that Jongware and a couple others mentioned the Adobe PDF format from Illustrator but I couldn't remember if .AI format would work or not. I know in the end you just end up converting everything to PDF.
    The way I was taught in school was in the simplest of terms, create custom art in Illustrator (when applicable), alter/enhance stock raster images in photoshop, and then you finish up and place/format in InDesign. My biggest problems really are understanding what format belongs where and when for print and I can't seem to find high resolution pics that work well in my documents, get them as JPEGs in google images.
    Anyways, thanks again guys! Still learning, thanks for putting up with me!

  • HT1430 hi i need help with something

    hi Ineed help with something

    i disabled my phone and its saying connect to i tunes and i have no idea what to do i need to enable my phone cause its been like this for a week

  • Hi i need help with something

    hi i need help with somthing

    Welcome to the user to User Technical Support Forum provided by Apple.
    Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

  • I need help with something! Technically my money is being used!

    A few years ago I had to let a (I think)5 year old use my apple account since for some reason one could not be made on his ipad mini. I have a game called clash of clans and it saves your process from your game center. What I think has happened is that the kid has been downloading more and more games and happened to have stumble across Clash of Clans. If it is a new device and Clash of Clans has not been downloaded on it ever and/or doesn't have a saved village then when it is downloaded a new village is started. But since it is my game center and my village has already been saved on there, he is asked if he wants to replace the current village with mine. Its been almost a year since I've seen unknown and strange activity, (my cousin has access to my account too but i trust him and i know it isn't him) but now he has taken it too far. There is a special currency in the game called gems. Gems can be bought with money, but i chose not to buy any and to just gradually earn them. I had around 750 gems which is about 1 1/2 of what you would get out of a $5 payment. Now I have about 300. Technically he is using my money. I don't know for sure that it is the kid, but what im asking is -if possible- to removed my saved village from all devices that way he no longer has access to it. Then after that i can log back in and get my village back while he can't since he does not have access to my account anymore.

    I woudln't recommend you try to pull this off yourself in a single flattened layer as you're basically talking about something like Pixel Bender effects which aren't on the beginner side to implement. Animating them in flash on a timeline is more your level.
    You can also do a simple google search for plugins (free for commercial) to help achieve the effect but it will come down to some coding. Depending on the plugin that coding may be simple or difficult. As they say, anything worth doing is worth doing right and that requires some experimenting and perspiration .

  • Need help with something VERY SIMPLE

    I'm brand new to Motion - as if today - but I'm only trying to do some VERY simple motions with photos - a simultaneous zoom in and reposition. What I've been doing is setting the starting key frame at one position (adjusting the x, y) and setting the scale. Then I create a second key frame and adjust the postion and scale. It will do the zoom, but then it re adjusts the starting position. If I readjust the starting key frame, it automatically readjusts the second key frame. I don't get it! Applying the various 'behaviors' doesn't seen to help. Certainly there's something obvious here that I'm missing - as I was able to do this in FCP. For some reason the key frames are not fixed when it comes to position.

    hi,
    a couple of thoughts?
    did you actually set a keyframe for position at the first frame?
    Also unless you are parked right on a keyframe or have the record button on, if you adjust a value, all the values for all keyframes adjust accordingly. I often mess something up because I wasnt parked on a keyframe.
    hth
    adam

  • Need a help with something basic, renaming pages made in muse

    Hi All
    can someone help me with a basic task,
    I need to rename a page ivve made in muse containing slide shows or forms,
    when I upload via FTP it over writes the websites index.html page
    any suggestions on what i do to rename Ive tried everything
    Thank you, In anticipation
    Julie

    Hi Julie,
    To rename a page name in Muse, please right click on page and go to page properties. You can rename the page name of all the pages as well as the "file name" in Muse but you can't change the 'File name" of the index page in Muse. Please refer to the following screenshot :
    If you choose to export the site as HTML, you can then change this as well but then the menu items links will be broken and you will have to manually link all the menu items outside muse.
    Hope this helps.
    Cheers!
    Aish

  • Help with something simple

    Hey guys so I'm trying to write a quick program that should be no problem but I hit a wall and have no idea what's going wrong. The part of my program that isn't working is as follows: I'm accepting a String hexadecimal value as input that can be any number of characters long (for example "FF34CD"). I want to convert this to decimal so what I have done is parsed the input string and assigned each character to a slot in an array called hexArray. I then wrote a loop that will populate decimalArray with the corresponding decimal values for the hex info (i.e. 1=1, 2=2, A=10, B=11, and so on). What I don't understand is that the code works fine for an input that is one character long (i.e. "F"), but as soon as I try a longer input, the decimalArray does not get populated at all. I have tried everything I can think of to make this work and I can't seem to figure it out. Any thoughts?
    * Write a description of class FAT here.
    * @author (your name)
    * @version (a version number or a date)
    public class FAT
        // instance variables - replace the example below with your own
        private String[] hexArray;
        private int[] decimalArray;
        private String hexValue;
        int test;
         * Constructor for objects of class FAT
        public FAT(String hexValueIn)
            hexValue = hexValueIn;
            hexArray = new String[hexValue.length()];
            decimalArray = new int[hexValue.length()];
            test = 0;
         * An example of a method - replace this comment with your own
         * @param  y   a sample parameter for a method
         * @return     the sum of x and y
        public int convertDecimal()
            int result = 0;
            int arraySize = hexValue.length();
            for(int i = 0; i < arraySize; i++)
                String entry;
                entry = hexValue.substring(i,i+1);
                hexArray[i] = entry;
            for(int i = 0; i < arraySize; i++)
                if(hexArray[i] == "0")
                    decimalArray[i] = 0;
                else if(hexArray[i] == "1")
                    decimalArray[i] = 1;
                else if(hexArray[i] == "2")
                    decimalArray[i] = 2;
                else if(hexArray[i] == "3")
                    decimalArray[i] = 3;
                else if(hexArray[i] == "4")
                    decimalArray[i] = 4;
                else if(hexArray[i] == "5")
                    decimalArray[i] = 5;
                else if(hexArray[i] == "6")
                    decimalArray[i] = 6;   
                else if(hexArray[i] == "7")
                    decimalArray[i] = 7;
                else if(hexArray[i] == "8")
                    decimalArray[i] = 8;
                else if(hexArray[i] == "9")
                    decimalArray[i] = 9; 
                else if(hexArray[i] == "A")
                    decimalArray[i] = 10;
                else if(hexArray[i] == "B")
                    decimalArray[i] = 11;           
                else if(hexArray[i] == "C")
                    decimalArray[i] = 12;
                else if(hexArray[i] == "D")
                    decimalArray[i] = 13;
                else if(hexArray[i] == "E")
                    decimalArray[i] = 14;
                else if(hexArray[i] == "F")
                    decimalArray[i] = 15;
            return result;
    }

    Yeah, I'm sorry, I should have been more specific, I'm not actually looking at the returned value, I'm simply running the convertDecimal code and then inspecting the decimalArray (as I haven't gotten to the part where I return the decimal value because the decimalArray is not populating correctly).
    For some reason it populates completely fine when the input is "F" but not "FF".
    Additionally, here are the following things I have done to rule out some issues:
    - I put a simple counter to make sure that the loop is still running the appropriate amount of times when the input length is >=2. The loop does run.
    - I hardcoded the amount of times the loop should run, rather than using arrayLength, still didn't work.
    - I even completely hardcoded, within the loop, the subscript values for the two arrays (i.e. instead of hexArray(i) and decimalArray(i), I actually wrote in: hexArray[0], decimalArray[0], hexArray[1], decimalArray[1], and so on and it STILL did not work. For some reason, whenever the input is longer than 1 character, not one of the IF statements is returning true, even though it (obviously) should be - like I said I even harcoded it to say:
    if(hexArray[0] == "F")
         decimalArray[0] = 15;... and so on. And it returns false for the IF statement EVEN IF I inputted, for example "FFFFF" where every single character in the input is an F - how could that if statement possibly be coming back false? And why does it come back true when the input is just 'F'??? I hope this helps clear up the issue I'm having. And thanks in advance for the responses guys you're awesome!
    Edited by: 991431 on Mar 3, 2013 7:51 AM
    Edited by: 991431 on Mar 3, 2013 8:00 AM
    Edited by: 991431 on Mar 3, 2013 8:01 AM

  • I am trying to load new Cd's onto my iTunes in my Mac. But it comes up with cannot convert file? Please can someone help with something that should be so simple.

    I am trying to upload new CD's onto my iTunes account on my Mac but it coming up with cannot convert file.
    "You don't have access for your iTunes media folder or a folder within it. What do I need to do?

    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • Where is the button called "tools" that Firefox keeps refering to when I ask for help with something?

    In order follow their directions for some help, I am told to use a button called "tools". Where is the darn thing?

    OH! There it is!! I knew it was a simple quest. Just can't get my head around everything this century requires in order to function effectively. whew. Thanks again, woof,
    Susan

  • Need Help With Something In ICloud Program

    I am trying to figure out if there is anyway possible I can save all my photos into ICloud? I keep
    looking on the Apple homepage and all it talks about is photo storage in ICloud.  I can't even find
    anything in my ICloud about photo storage. If anybody has any idea how to do this can you please help
    me tonight.

    Hey TrishaA2466,
    Based on your description, it sounds like you may be talking about the new iCloud Photo Library beta feature. If you are looking for more information on this new feature, you may find the following pages and articles helpful:
    Apple - iCloud - Photos
    iCloud Photo Library beta FAQ - Apple Support
    Cheers,
    - Brenden

  • Help with Adobe photoshop cs3....

    Hello. i need help with something. i'm trying to switch the mode so that both of my files will show up at the same time in cs3. i understand there is a command for it, but i don't know what it is. can someone please help me with this issue? help would be greatly appriciated. thank you very much for your time.

    There is an option for 'window'. the problem is, i dont know where Wndows, arrange, or tile is located at! as of now, the program only allows one picture to show on the screen. i want two pictures, but i dont know the command for it. i've heard of it, but i forgot it! oh and thank you very much for replying to me!

  • Need help with Mail

    Hi:
    Need your help with something I don´t understand: we try to set up a new hotmail account in Mail (we have used both Preference Panel and directly in Mail) but it never recieves the Inbox. I can send but don´t see anything in Inbox.
    I looked into User/Library/Mail/V2/accountname/INBOX.mbox/ and the folder with the xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx name structure is never created.
    I tried to set up another hotmail account and it works ok, only this specific account fails.
    I Used a Permissions repair, didn't worked. Erased all data in V2, again not worked. Tried to "cheat" Mail setting up another hotmail account and then changing info to the specific account failing, not luck. Also reset sync services (http://support.apple.com/kb/TS1627?viewlocale=es_ES), still not work. Rebuild inside Mail also didn´t worked. Any idea to get this account working?
    BTW, sorry for my bad english...

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the line below on this page to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Maybe you are looking for