Help with Sony Digital Transfer System DLS-M1

I have recently moved into a home that is fully wired throughout with the Sony DLS-M1 system from the early 90s. Unfortunately, all that is connected to it is a tuner radio. The radio can be heard through the entire home which us great, so now I am trying to connect other audio to the system and am having no luck. I have been unable to get anything to play through the system despite having it hooked up to the master receiver. I see in the manual that if you are connecting a non-Sony product without an infrared remote to the receiver that it says it will not work. There has to be a work-around for this,right? I am just looking to connect something like an iPod to the system using a mini-to-RCA connection. It will come out of the local speakers fine, but nowhere else in the house. Please help, I can't find ANYTHING about this system anywhere online!

Sorry, I mean the rest of the legacy system.  It is a few Sony components (tuner and a unit for video/surround), but most importantly the current transfer system connects to terminals all over the house that allow you to use speakers in that particular zone.  They are little white receiver boxes that allow you to select an audio source from the main transfer and play that source on the speakers in that zone.  I am worried that these boxes will not work with anything other than the current master unit, thus losing the current ability to play audio in different zones in the house.  Is that the case or will the rest of the system work with the new master?

Similar Messages

  • Help with Sony Digital Camcorder DCR-SR42 Pulling Images FROM Camera to Mac

    I need some help...I purchased a Sony DCR-SR42 camera and used it while on holiday. I can't seem to figure out what software I need to pull the movies from the camera. After MANY calls to Apple Tech support (and being told that I HAD to buy iLife 08, which I don't want to do if i can avoid it), I finally found somebody who said that I could use freeware MPEG Stream Clip to pull the videos from my camera and convert to MPEG4, then I can use iMovie HD 06. All this is with the assumption my computer recognizes my camera as a harddrive (which I'm not sure, and I'm at work without computer OR camera).
    My question is this - does anybody have any experience with THIS camera (Sony DCR-S42) and what to do with iMovie 06?? Any and ALL suggestions would be GREATLY appreciated.
    Thanks!
    -Jill

    Yes, only iMovie 8 will accept a video stream from a hard disk camera.
    All other versions of iMovie will not: they require a DV stream from tape via firewire.
    In other words, your camera is incompatible will all versions of iMovie except version 8.
    To convert to mpeg4, or even DV which is what iMovie is intended for, you need:
    mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, as well as the the Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • Help with java digital signing code

    hello people.
    can anybody help me?
    i have find a java code to resolve my problem with sending pay in soap envelope with digital signature and attached certificate. i compiled it with jdk jdk1.6.0_37. and it works.
    i need it to work in built-in jvm in oracle 9i. in oracle 9i jvm release is 1.3.1. Java code does not work there. there is an error
    class import com.sun.org.apache.xerces.internal.impl.dv.util.Base64 not found in import.
    i did not find this class in network.
    can anybody help with rewriting it for jvm 1.3.1?
    thanks in advance.
    code below:
    import com.sun.org.apache.xerces.internal.impl.dv.util.Base64;
    import java.io.*;
    import java.security.Key;
    import java.security.KeyStore;
    import java.security.PrivateKey;
    import java.security.Signature;
    import java.security.cert.Certificate;
    public class Sign {
    public static void main(String[] args) throws Exception {
    // TODO code application logic here
    BufferedReader reader = new BufferedReader(new FileReader("c:\\cert.p12"));
    StringBuilder fullText = new StringBuilder();
    String line = reader.readLine();
    while (line != null) {
    fullText.append(line);
    line = reader.readLine();
    KeyStore p12 = KeyStore.getInstance("pkcs12");
    p12.load(new FileInputStream("c:\\cert.p12"), "Hfrtnf$5".toCharArray());
    //????????? ????????? ????, ??? ????? ????? ???????????? alias ? ??????
    //Key key = p12.getKey("my kkb key", "ryba-mech".toCharArray());
    Key key = (Key) p12.getKey("my kkb key", "Hfrtnf$5".toCharArray());
    Certificate userCert = (Certificate) p12.getCertificate("my kkb key");
    String base64Cert = new String(Base64.encode(userCert.getEncoded()));
    //signing
    Signature signer = Signature.getInstance("SHA1withRSA");
    signer.initSign((PrivateKey) key);
    signer.update(fullText.toString().getBytes());
    byte[] digitalSignature = signer.sign();
    String base64sign = new String(Base64.encode(digitalSignature));
    String base64Xml = new String(Base64.encode(fullText.toString().getBytes()));
    System.out.println("<certificate>" + base64Cert+"</certificate>");
    System.out.println("<xmlBody>" + base64Xml+"</xmlBody>");
    System.out.println("<signature>" + base64sign+"</signature>");
    Edited by: user13622283 on 22.01.2013 22:08

    My first search is to see if there is an Apache commons project that provides it. Lo and behold:
    http://commons.apache.org/codec/apidocs/org/apache/commons/codec/binary/Base64.html
    commons-codec.

  • Help with  songs files transfer on iPod and iTouch?

    Hey guys.
    I just got an itouch recently and I need help with something but I don't really know how to describe it so I'll try my best to put it in a way for you guys to understand. Is there an option where when you plug in the iTouch into your computer, but you don't want to transfer the songs/mp3 files you already have originally on your iPod to be automatically transfer over to your itouch? Everytime when I connect the iTouch to computer it would just copy the mp3 files over to it butI don't really want that. I just want the mp3 file to stay on the iPod only.
    Thank you, QuTran

    Does it get cut off on the iPod or in iTunes (or both)?
    Does it always happen with the same songs?
    The problem may be related to the program that was used to encode those files. Do a +Get Info+ on a few of the affected songs and see if there is anything in common where is says +Encoded with+ on the Summary tab.

  • Importing a movie works with Sony digital 8 tape but no other tape will import

    I can import movies from Sony Digital 8 tapes, but any other 8mm metal tapes will not import. Any Ideas why and how can I import other tapes. It shows on the playback screen but no data from device.

    Try importing your iMovie project into FCP as follows:
    In FCP:
    1. > File >Open
    2. Select the iMovie project you want to open
    (the FCP Browser should then show the individual iMovie clips)
    3. double-click the iMovie clips to open them in the FCP timeline
    4. >File >Save Project As (to save your imported iMovie project as a FCP project)
    5. Render the clips: because iMovie uses a different DV encoding method to FCP, so rendering iMovie media in FCP converts them to the FCP-compatible format.

  • Help with SONY DV Handycam - iChat displays 'no camera attached' message

    Hardware:
    iBook G3 800
    Sony DCR-TRV27E
    Software:
    OS X 10.3.9
    iChat AV 2.1 (v153)
    Problem:
    Camcorder is connnected to the iBook via firewire and I can see live video in iMovie but iChat displays the message 'There is no camera attached to this computer.'
    Anyone know a work around for this?
    Thanks for your help.

    Hi Ryan,
    I don't know if you know but you have also the option of using the Solved and Helpful buttons.
    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...
    You may want to remember this for next time.
    9:33 PM Sunday; June 18, 2006

  • Need help with deciding digital options... creative ddts-100, ddts-610, x-fi i/o cons

    I think i have narrowed down my options for upgrading my computer audio... except i am not sure which way to go and would like some help or ti
    ps.
    ... thanks.
    first off i mainly game and listen to music on the pc or listen to the music while gaming... i currently have the logitech z5300e speaker system, creative labs x-fi fatalty pro gamer sound card... i wanted to purchase a receiver to go digital except thats a bit too much for me right now, if i was to get a receiver it would be for my home theater. so i looked around and came up with a couple alternati'ves, except i am not sure if these options will work with what i have now...
    ?st option, i could go along with getting a creative labs inspire digital 5500 speaker system because that sytem comes with a decoder box that creative labs no longer makes... this decoder box has 2 optical in, coax in, also has a adaoter that connects the speakers to the decoder box as well... runs around 200.00 dollars?2nd option, i found on creatives website a new decoder called the dts-60 except this option would require a receiver because this newer model does not come with the speaker adapter as the dts-00 does... but since i am going to upgrade my home theater receiver i would have that one to use with the coax connections. this option runs 00.00 dollars?3rd option, i? found on creatives website a x-fi i/o console so far from what i read it works with my sound card ... i am still not sure if i can just connect the speaker cable to the console but this would run 80.00?4th option , on there website there is also, a dribe bay x-fi i/o upgrade. not sure if it will work with my soundcard but i was thinking it may be an option to use cause the card i have has built in decoders i think..
    ??what would you guys do ?

    dont buy creative ...no support from them

  • ITunes does not recognise iPhone 3G (version 4.2.1) and need help with how to transfer photos, contacts and/or messages PLEASE??

    Can i use wifi to transfer contacts, photos, messages etc- how??

    Try this one and see if it helps:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes, Sync and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Hey i am unfamiliar with how to use icloud for storage. Can some one slowly( lol ) help me to understand how this thing works. I also need someone to help with how to transfer pics from your iphone to your flash drive.

    Hello i am needing some assistance as i am not very good at how the cloud works. I need to delete my account and start over.  I don't want to loose all of the things that i have on phone. Help!

    Slowly
    http://www.apple.com/icloud/features/
    but surely
    http://www.gottabemobile.com/2011/10/18/how-to-sync-email-contacts-and-calendar- with-icloud/
    we will come
    http://transfer-iphone-contacts.blogspot.com/p/iphone-contacts-sync-via-icloud.h tml
    to understanding
    http://support.apple.com/kb/PH12519
    on how icloud sync and backup work.
    http://www.apple.com/support/icloud/backup/
    http://support.apple.com/kb/ht1766
    And here we will find instructions on how to backup (import) pictures to computer, cause there is no direct transfer to flash drive.
    http://support.apple.com/kb/ht4083

  • Need Help with Sony Hybrid replacement tips

    Hey all,
    First post here, so please excuse me if I've posted in the wrong section. Earlier this month I ordered myself the Sony Hybrid EPEX10A/BLK Replacement Earbuds from Amazon.com. While attempting to get a large tip on my Sennheiser CX500s, the colored part broke. I now only have one large tip, which is currently fitting the CX500 just fine. I really need another large tip, and I don't know what to do. I thought the best option would be to contact Sony Support and ask for a replacement (I'm assuming my warranty is still in effect, don't know anything), but I don't know how. I went to this (http://esupport.sony.com/US/perl/contact-land.pl) website and selected technical support, and since I couldn't find my product in the list, I typed in what I thought was the model number, and it came up with no results. I have no idea where the model number is on the packaging (which I still have).
    Can somebody please help me get a replacement? Other than the broken tip, these are the best tips I have had , and I would really like to continue using them.
    Thanks for the help!
    Solved!
    Go to Solution.

    Contact the Sony Parts and Accessories team - they have a different number to Sony Technical Support and should be able to locate the correct part for you - details on the following link:
    https://servicesales.sel.sony.com/ecom/ ... /index.jsp

  • Help with Mail & Digital Signatures

    My work is moving to Common Access Cards and digitally signed email. I can't get Mail to bring up the digital signature icon when I use the CAC card. It works fine with a software certificate, but I can't use that.
    The certificates in the CAC show up in a different keychain, and I think Mail wants the certificates in the login keychain. I've tried the following:
    -- importing the certificate from the CAC (didn't allow it)
    -- changing the default keychain to the CAC keychain (caused mail and keychain access and Safari to all quit)
    I don't really want to try logging in using the CAC card -- the only instructions I've seen to do this require messing around with Terminal and other files. Seems the potential for messing things up is rather large.
    Anyone know how I can get Mail to recognise the CAC card for digital signatures?
    Mac Pro   Mac OS X (10.4.9)  

    I haven't had to do this myself, but these instructions may be of help, if you haven't already seen them.
    Matt

  • Help with small office PBX system.

    Hello all,
    I'm looking for any help or advice here.
    We have an old Panasonic PABX, 3 external CO lines and 16 extension lines (only 8 in use).
    Question 1.
    We have CO1 connected to the fax/broadband number. C02 and CO3 connected to our other number. How is it possible that CO2 and C03 use the same line number but are in fact 2 separate usable lines? I am going to check with BT but is it possible this is a 'feature line' or similar?
    Question 2.
    An issue has arisen where C03 will not hang up a call. People keep saying they are not able to disconnect the call from the other end either.
    Any clarification or clues on this would be greatly appreciated.
    Olly.

    Hi
    It is possible to have a business number with more than one line (aux working). Most large business's have this set up, the designation would normally have line 1 line 2 line 3 etc etc.
    You would need to talk to who ever supplied the system to you, to get them to check the settings for line 2 (of your main number, which is line 3 on the system. You could contact BT Business Fault reception on 154 to get them to test the line
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Please help with Windows 7 x64 System error: Critical Kernel-power Event 41

    I'm recieving this error while moving my laptop or working with it? Can someone help me to read memory dumps and to understand what causes this error please?
    Where i can fount theese dump files? Can someone read them and is it possible to understand what is happening?
    I have made full check of my memory and there are No errors I've also checked HDD with regenerator there are no errors too. but this not means that they can not be the problem. There is doubt about one of my HDD because when laptop is blocking there is bad
    noise from HDD.
    PS: There is another issue which is strange two of times when this happens the whole MBR was destroyed and the system refuses to boot ... only reboots. And i made bootrec /fixboot /fixmbr and this solve the problem ... I don't know is this connected with
    system error, but i'm trying to give more details.
    Thanks a lot.
    Here are i'm posting my error details: 
    System
    Provider
    [ Name]
    Microsoft-Windows-Kernel-Power
    [ Guid]
    {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    EventID
    41
    Version
    2
    Level
    1
    Task
    63
    Opcode
    0
    Keywords
    0x8000000000000002
    TimeCreated
    [ SystemTime]
    2011-06-25T20:38:38.328017300Z
    EventRecordID
    7571
    Correlation
    Execution
    [ ProcessID]
    4
    [ ThreadID]
    8
    Channel
    System
    Computer
    Rumen-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    BugcheckCode
    0
    BugcheckParameter1
    0x0
    BugcheckParameter2
    0x0
    BugcheckParameter3
    0x0
    BugcheckParameter4
    0x0
    SleepInProgress
    true
    PowerButtonTimestamp
    129535076822776383

    Before every critical Errors in event log i found information about Kernel Power I'm pasting it here: 
    System
    Provider
    [ Name]
    Microsoft-Windows-Kernel-Power
    [ Guid]
    {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    EventID
    89
    Version
    0
    Level
    4
    Task
    86
    Opcode
    0
    Keywords
    0x8000000000000020
    TimeCreated
    [ SystemTime]
    2011-06-27T16:07:21.023625500Z
    EventRecordID
    9262
    Correlation
    Execution
    [ ProcessID]
    4
    [ ThreadID]
    44
    Channel
    System
    Computer
    Rumen-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    ThermalZoneDeviceInstanceLength
    21
    ThermalZoneDeviceInstance
    ACPI\ThermalZone\TZS1
    AffinityCount
    1
    _PSV
    0
    _TC1
    0
    _TC2
    0
    _TSP
    0
    _AC0
    0
    _AC1
    0
    _AC2
    0
    _AC3
    0
    _AC4
    0
    _AC5
    0
    _AC6
    0
    _AC7
    0
    _AC8
    0
    _AC9
    0
    _CRT
    361
    _HOT
    0
    _PSL
    0000000000000000
    System
    Provider
    [ Name]
    Microsoft-Windows-Kernel-Power
    [ Guid]
    {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
    EventID
    89
    Version
    0
    Level
    4
    Task
    86
    Opcode
    0
    Keywords
    0x8000000000000020
    TimeCreated
    [ SystemTime]
    2011-06-27T16:07:21.039225600Z
    EventRecordID
    9263
    Correlation
    Execution
    [ ProcessID]
    4
    [ ThreadID]
    44
    Channel
    System
    Computer
    Rumen-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    ThermalZoneDeviceInstanceLength
    21
    ThermalZoneDeviceInstance
    ACPI\ThermalZone\TZS0
    AffinityCount
    1
    _PSV
    359
    _TC1
    0
    _TC2
    50
    _TSP
    0
    _AC0
    0
    _AC1
    0
    _AC2
    0
    _AC3
    0
    _AC4
    0
    _AC5
    0
    _AC6
    0
    _AC7
    0
    _AC8
    0
    _AC9
    0
    _CRT
    361
    _HOT
    0
    _PSL
    0000000000000000
    These two informations are before every critical error.

  • Help with NAS (Network Audio System) setup.

    Anyone having any ideas how to set up this? I couldn't find any documentation, no howtos, no help, just an obscure nasd.con.eg in the package.
    Has anyone managed to set up a client and a server for this system, it'd be really useful to me...

    Idd, seeking is hard and really hacky (:D) to implement with the two process solution. :\ You can use the
    extern-movie.sh 10.0.0.4 movie.mkv 124
    to seek where you want in the files, but you'd have to exit the script, then restart the script in the middle of a movie ... :\ Writing a plugin for MPlayer might kinda defeat the simplistic design of rsound. Shouldn't be hard to implement though. I made an rsound client in python in like 5 mins, so shouldn't be too hard.
    As for NAS: http://linux.die.net/man/1/nasd this helped a little, but it really looks like legacy software. "When the Network Audio System server starts up, it takes over /dev/audio."
    I've been trying to get nas up and running, and it wasn't hard to get it to play some stuff with mplayer, but it feels quite broken using the default config + mplayer. Might be my alsa emulation of course, but mplayer showed hickups, erratic framerate (-autosync 100 helped against this), bad sound quality, and a couple of crashes.
    You could try this from the command line. Shouldn't need to set-up any config file yet.
    sudo nasd -aa
    And running this in another shell:
    mplayer <movie> -ao nas
    Try it locally, not sure how to set up nas to connect to extern servers. :\
    Last edited by Themaister (2010-01-04 18:47:10)

Maybe you are looking for