Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Similar Messages

  • Creative Sound Blaster Audigy Value/SE/LS Driver 01.04.0

    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit Vista Beta Driver 0.04.0055
    Yeah, 32-bit, wooo.
    When will a 64-bit version be available?

    Has anyone tried the "AMD64" Driver for the Audigy Value (I assume this is the SE?) that is on the bundled CD?
    I tried different driversets from the download/support site to no avail.
    I didn't think about the CD driver until I got to work this morning.
    Really wishing I picked up the Li've! (yesterday) instead of the Audigy Value now
    ...expected this card to have a better chance, especially with "x64 drivers" on the box.
    Oh well, I'll give it one more shot tonight with those CD drivers... hopefully something will work.Message Edited by abz on 2-07-200604:08 PM

  • Need Help On Sound Blaster Audigy Va

    hi!
    i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
    Please reply back soon cause i need to buy that card soon.

    najam wrote:
    hi!
    i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
    Please reply back soon cause i need to buy that card soon.
    You can find all this information written in motherboard's manual (if you don't have one then normally you can DL the manual from motherboard manufacturers support pages).
    Also, you'll propably can find this information by googling quite easy too (search after reviews of your motherboard model/pc model (if PC is factory build model)).
    jutapa

  • Please help.   My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu.  Desperately trying to get my magazines prepared for press today!  HELP!

    Please help.   My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu.  Desperately trying to get my magazines prepared for press today!  HELP!
    My magazine last month is still working ok - but this month's version has just started crashing for some reason.

    We can't know. You have not provided any system info, not told us what version of ID you use nor provided any specifics about the document like images, color profiles, fonts, paragraph styles and what have you...
    Mylenium

  • Just updated to the newest version of Firefox and it keeps crashing when I open the browser. I tried opening it with add-ons disabled and it still keeps crashing. Crash ID: bp-03b36d11-304e-4f80-ab9e-79b7f2111223

    I just updated to the newest version of firefox for my mac laptop. It keeps crashing when I open the browser and does so even in safe mode. Laptop is about two years old. Might it be an issue with the OS? I have not updated to Leopard yet.

    It seems that the problem is related to fonts.
    (1) How were you updating your operating system ?
    If you use *_Software Update_*, hurry up, download and apply the combo updater available from :
    http://support.apple.com/kb/DL1361
    but CAUTION, this update introduce a serious problem with some fonts. At this time the only workaround available is to reinstall 10.6 tyhen apply the combo updater 10.6.6 available from :
    http://support.apple.com/kb/dl1349
    (2) if you didn't used *_Software Update_*, run a maintenance tool like the free MAINTENANCE available from :
    http://www.titanium.free.fr/index_us.html
    Apply it to clear caches files, mainly those dedicated to fonts.
    It would be also a good idea to check the health of your fonts with FontBook.
    Yvan KOENIG (VALLAURIS, France) vendredi 1 avril 2011 21:25:39

  • I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask...
    Uhm, why don't you go to the right place, then? There are several Steam/Portal forums out there...

  • Error with Sound Blaster Audigy 2 installation...driv

    Hi
    I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
    Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
    Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
    I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
    It comes up with a message:
    Setup could not detect and Sound Blaster Audigy 2 on you system.
    Please ensure that your sound blaster hardware is properly installed before running this setup program.
    setup will not exit
    After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
    So i double clicked on the Creative Volume Control to check everything was on.
    I'm not sure if this is an error but a long the top where you select the output device mine says:
    SB Audigy [A000]
    I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
    I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
    So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
    Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
    I definately have an Audigy 2 and it has worked properly allowing me to update it before.
    Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
    Any advice and help would be appreciated.
    Thanks

    fedepolito,
    I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
    Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
    Message Edited by Katman on 03-29-2009 2:59 [email protected]

  • Erorr with Creative Blaster Audigy Value

    hi
    i have one
    Creative Blaster Audigy Value.
    but when im run creatvie graphic equlaizer see this erorr :
    Graphic Equalizer
    The audio device supported by this application is not detected. The application will exit.
    OK
    what am i doing?

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Issue with Sound Blaster Live! 24-bit driver

    ,Issue with Sound Blaster Li've! 24-bit driverw Hello, I have a 2004 Dell Dimension DIM900 and a couple months ago it began making a loud crackling noise sporadically. It sounds like real ear-piercing static, like when a microphone is being plugged in, only in short random bursts at alternating pitches so I originally thought my speakers were blown. I turned them off and decided to use a headphone set only to hear the same annoying sound.
    I looked in the sound settings and read that I have a Sound Blaster 24-bit internal driver in my system, assuming that information is correct.
    What can I do? I did the search and read the read on those X-Fi drivers that had a similar problem, but I didn't know if that was the same as this because the thread concluded that their problem was exclusi've to systems with Nvidia dual SLI graphic configurations and X-Fi drivers. ? Any input would be appreciated, thanks!

    Hi IT5,
    May I know if this Li've! 24bit came pre-installed on your Dell computer or did you purchase & install the sound card separately?

  • Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

    I'm considering converting my laserdisc collection over to DVD.
    As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
    My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
    The laserdisc player has the following:
    AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
    I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
    I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

    Alright, let me just double check...
    As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
    The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
    From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
    Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
    Message Edited by madmax66 on -6-2004 02:40 AM

  • Help! Sound Blaster Audigy - bass and tre

    Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

    What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
    Jason

  • Problems With Sound Blaster Audigy: New Sys

    I just received my new computer from Dell:
    Pentium D 3.0ghz
    Geforce 7800 GTX 256mb
    2 GIGs ram
    Windows Xp Prof x64
    SoundBlaster Audigy
    My problem occurs in my game called Nascar Racing 2003 Season. The sounds play fine, however when It comes time to load more 3dimensional sounds (like cockpit), the sounds turn into a high pitched buzz, and then freezes my computer so that not even ctl-alt-del works. Sometimes this happens when exiting the game as well, and my system does a complete memory dump and then shows this file: ctoss2k.sys..
    I've reinstalled the drivers, the game, and I'm out of ideas. I don't have any other games to test this one, but I've run the Dell diagnostics and run the dxdiag for the sound and it passed with flying colors. If nothing can be done here my next idea is getting on the phone with Dell and having them fix my new computer!
    Any help would be greatly appreciated!
    P.S. On my last computer I had Sound Blaster Li've! and that worked perfectlyMessage Edited by mciarlo on -0-2005 04:05 AM

    Noticed your setup (XP PRO 64)
    Correct me if Im wrong but I dont think there are drivers for 64bit yet Right?

  • Windows Vista vs. Sound Blaster Audigy Value = Problem

    I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
    Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
    Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
    Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
    I will be extremely thankful to you if you please provide a solution to these problems.
    Thank You........

    altho i tried this with audigy se u might wanna check this
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

  • NEED HELP with Sound Blaster 5.1 digital LIVE! IM FED UP WITH THIS PEICE OF JUNK SOUND C

    yes i installed the Sound Blaster 5. digital LIVE! into my system and i got a new updated installation cd from creative and everything .. now heres the problem everytime i try to do an upgrade or download stuff from creative i always get an error message sayin MY SOUND CARD IS NOT INSTALLED .. but everything on my computer says it is installed and working properly .. so what the hell is going on ??? im a first time buyer of creative products and i purchased this from word of mouth on how good it was and i tell you what this sound card is a peice of **bleep** ... i have never in my life had such a problem installing something .. well i cant even use diagnostics cause i get the same message " MY SOUND CARD IS NOT INSTALLED ... i have tried uninstalling everything and so for and still nuthing .. i get sound through it but i cannot access any of the features from the cd or upgrade any of the drivers or anything .. SOOOOOOOOOOOOOOOO WHAT AM I SUSPOSED TO DO ?? IM ALSO GOING AS FAR AS SENDING THIS BACK TO CREATIVE FOR A REPLACEMENT CAUSE THIS CARD HAS TO BE DEFECTIVE .........ANYONE WITH SOME ANSWERS PLEASE LET ME KNOW ?

    ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
    so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
    i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
    and everytime i try to do an update i get the no sound card error message so im back to square ,
    i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
    my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
    Message Edited by theviper on -06-2005 :00 AM

  • Problems With Sound Blaster Audigy 2

    The Problem that I'm having is this:
    Every time that i bring up the volume console to do whatever, once i move the mouse cursor into the window, my computer either restarts or locks up. Now I have tried over and over again to update all drivers and software for this sound card. Even thinking that it might be a compatibility issue with other cards (video, wireless) i updated their drivers as well. Doing so made me run into other problems, like opening up office Word, just locks up. I never had these problems before at all until i installed this sound card. Now, the card works perfectly! Sound comes out in all respecti've ports and microphone and line in works as well. Its the software that I cant seem to use. I just don't understand why, this is a brand new card with its own software. But to add lastly to this, I formatted hard dri've, installed Windows XP home, then immediately afterwards i installed the drivers and software for the sound card and it worked like nothing was wrong at all, software and all. But once i installed my video drivers and software, either the sound card software didn't work or the operating system would lock up right after the splash load screen. Please, can someone let me know anything that i can do to fix this problem! It's been very bothersome and annoying as all! Thank You.

    Alright, I once again formatted the hard dri've. This is what i've done:
    Windows XP Home w/SP
    All Motherboard Drivers
    Disabled On-Board Sound
    Installed Audigy 2 ZS Drivers and Software
    Removed Wireless Card and Video Capture card
    And all Windows OS updates
    Direct X 9.0c
    But what i haven't done yet is installed the drivers and software for the video card. I have a ATI 9800 XT 256mb AGP card, getting updated drivers for the card is not a problem. But I also didn't install service pack 2 yet either. im trying to figure what is really causing the problem now. But as of now, the sound card and software is working properly. thats pretty much where i stand now, so if there is anyone out there that might now what i can do from here, or what should i NOT do, please let me know!
    Thanks again

Maybe you are looking for