Help with soundtrack pro..breaking tracks up

whenever capture my video, I always capture the entire tape at a time (or I cut it up 10 min each) and from that I break it down smaller
now suppose I have a 1 min clip that I cut from the 10 min captured footage...when I send that clip to soundtrack pro in order to fix the audio, it opens up the ENTIRE captured video (10 min), therefore I end up working with a bigger file, and taking up more space that I want it to whenever I save it with the filters on..
do you know how I can prevent soundtrack from opening the original captured track, and just allow me to just handle the 1 minute that I only want fixed up?
thanks!
Rishi

Right-click on clip to create and send a soundtrack pro audio project (stap)and click on the 'send only referenced media' box to send only the portion you are working on

Similar Messages

Voice Over with Soundtrack Pro

I have spent about 8 hours on this and can't figure out how to voice over with Soundtrack Pro. I could do it with Soundtrack but something is different with this new version. I have not used StP that much, so I am relying on you pros out there to get me started in the right direction! Thanks everyone for your help.
I did search for related topics but found nothing that was along the lines of what I needed.

Well, I finally found that if I switch to standard layout then the "transport controls" appear. For some reason they are not in the other layout that has separate mixer and video windows. Now I am recording and everything is fine.

TS2510 problem with soundtrack pro v2.0.2 under snow leopard

Hi, I've just upgraded my mac book to snow leopard and now when I try to record something with soundtrack pro v2.0.2 through the line input jack, the internal microphone is still switched on and none of the preferences allow me to switch to the input jack,ks
Does anyone know whether STP v2.0.2 will run ok under snow leopard? If I need to upgrade the drivers, does anyone know where I can find these and how to instal them.
Many thanks.

There are no "drivers".
Use Audio MIDI Setup to set your audio input.
Good luck.
x

Does anyone could help with autoviewer-pro 1.3

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

This post is from another topic but has to do with iPhone 4s unlock.
ArnettH_VZW
replied 11 hours ago
Good morning frank-bao,
In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
The device being unlocked must be active on a Verizon Wireless line of service.
The line of service must be active at least 60 days.
The line of service must be in good standing for the past 60 days.
Customer may only have one 3G SIM Unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

Help with autoviewer-pro 1.3!

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

bpang,
Kindly tell me how you solved your problem
BB

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

Using Mbox 2 with Soundtrack Pro

Hi all. I was wondering if I can use an Mbox 2 to record audio with Soundtrack Pro, or do I have to use ProTools?

You should be able to use a digidesign interface with STP by utilizing the digi CoreAudio driver.

(Newbie to Soundtrack Pro) CD Track Markers??

Hi hope you can help, newbie user here!
I have recorded a DJ mix for a competition using Soundtrack Pro. As it stands, its is a solid Hour long recording. I was wondering if its possible to break this down using soundtrack pro so when I burn the CD it will have several Individual tracks, rather than just one long track.
Many thanks for any help you may be able to give!

Thats great! I had a go at chopping the tracks down and placing each of them on a seperate track, then exported using "All Tracks". Wouldn't let me export each track as MP3 tho, only AIFF or I think WAV was an option as well. I think iTunes should convert the AIFF tracks to CDA when I burn the CD.
A long winded approach to making a mix CD but, worth it! I agree tho, it would be a great feature for apple to add in the next update or version!
Thanks for your help!

Help with Logic Pro 8 Outputs

Hi
Struggling with something that i imagine is very simple but just cant work it out! Please help me.
I will be using Logic 8 within a live environment and need to basically get various audio tracks 'out' of logic via my interface into a mixing desk. I have 8 sub outs on my interface which is fine for me. (prob lots of people do this also with a mixing desk in the studio environment for intergration with the desk and outboard gear so i 100% sure it can be done!)
Prob 1 is that the track sub outs in logic come in stereo pairs. If i want bass to go to output 1 , and kick for eg to go to output 2, how can i do this???? Is there a way to change the track outputs to mono?
Prob 2 is that if i change the outputs in one session, for example click to output 3 - 4, vocals for example to output 5 and 6, then save the session, close and reopen, they have all reverted to output 1 and 2. In a live situation it is annoying to have to change these before each song starts!
I play in a electro band that incorperates live drums, analog synths, logic audio (backing tracks kinda thing) aswell as live instruments, and finding logic pretty challenging to use for this!! We are flat broke and cant afford new stuff so have been living with it but we are now starting to need more outputs (for the benefits of live mixing , ie not giving the engineer a stereo out) . Surely the mixer in logic is capable of these totally bog standard audio routing options?!?!?
Thanks alot for any help
David

jayme Lewis wrote:
So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should).
?It's highest settings?
Do you mean the sample buffer is at 32 or 1024.
Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
Try these settings under Preferences/Audio.
I/O Buffer Size - 256
Process buffer - medium
Do NOT have the I/O Safety Buffer selected.
More info.
What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
When you open Logic's CPU meters are you seeing a single core spiking?
What effects are being used on the audio and single VI track?
pancenter-

Help with Logic Pro 8, Apogee Symphony System, and Nehalem 8-core Mac Pro

So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should). Of course I could drop the buffer size and unclick a few things here and there. but why? Is my machine powerful enough to handle it or not?
I've deleted the plist a bunch of times and repaired hardisks and everything. any help from a certified LOGIC pro would be excellent and much appreciated! thanks in advance,
jayme

jayme Lewis wrote:
So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should).
?It's highest settings?
Do you mean the sample buffer is at 32 or 1024.
Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
Try these settings under Preferences/Audio.
I/O Buffer Size - 256
Process buffer - medium
Do NOT have the I/O Safety Buffer selected.
More info.
What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
When you open Logic's CPU meters are you seeing a single core spiking?
What effects are being used on the audio and single VI track?
pancenter-

Need help with Project Pro

Hi,
I recently purchased few licenses for Project pro from office 365 (online version). When I log in to office 365 and go to my apps I can not see Project Pro app there? Where it might be?
Also when I create a project with desktop app, where is the option to sync that project to server? The license already included with
Project Online and Project server Sync.
Any Help solving my issues will be greatly appreciated.
Thanks in advance..

Hi,
Please see this
article for starting a project with Project Pro for Project Online.
Don't forget to use in Project Pro the email adress used for creating your O365 account.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Help with Premiere Pro freezing after importing MPEG files

I have
had some files sent for me to edit which are MPEG I believe. They will import, but
as soon as I try and do anything with it, the whole thing freezes for several minutes! It is unworkable. I have tried waitin
g for the audio file to conform. I have tried rendering the work area. None of this helps. If it does play, it lasts for a few seco
nds with sound playing at what appears to be twice the speed! I normally wortk with DV files and these are fine. By the way, the files I am struggling with do play in media player/real player etc. I cant believe that premiere would not support this format. Even Movie Maker just about manages it! When it does freeze, it really freezes! As in it wont even let me shut down without literally ripping out the power cable!! Please help with simple English if possible, and sorry if I havent given you specifics that you would need. But I honmestly dont know as these were just files sent to me on a memory stick. It was filming from a camcorder, but not sure what type. The thumbnail says MPEG and the properties just says movie file. It is about 2GB for an hour I think. Thanks for any help. My version is Premier Pro 1.5

Genuinely sorry that I dont know all the technical things that people need
to know. I always try to find out when I am asked specifically and told how
to find them. I did look at the link, but that just seemed to be a lot of
stuff about posting ettiquette, nothing about MPEGS. Perhaps I got the link
wrong. All a bit hard for me as I have a visual imp[airment. Thanks again

Need help with Go Pro Hero 3 and Premiere Pro CS6

Hello,
I recently acquired PP CS6. I put my clip (30 seconds long) and I go to preview while editing, for the first 1.5 seconds it is fine but then it is very choppy. The audio is fine but the video does not play smoothly. When I save and process the video it is fine. It is frustrating to try to edit video this way. I'm sure I'm missing a step when creating the project but I haven't used Premiere Pro since CS6. This is only happening with Go Pro Hero 3 videos, any of my other cameras are fine. Any ideas? Thanks

There's a lot of confusion over how video encoding affects subsequent editing performance - a higher data rate has no direct relation to how much effort is required to decode and play the footage, in fact a higher data rate often makes playback easier - which is why transcoding to AVI can help with playback even though the files can be hundreds of times larger. Data rates with the same codec depend on the frame contents and recording quality, but for playback and editing what matters is the GOP (group-of-pictures) structure and the complexity of the encoding algorithm. Provided your disks are fast enough the data rate is immaterial to Premiere.
With long-GOP files (as typically created by consumer DSLRs and helmet cams) we have keyframes (I-frames) with a complete set of pixel data, then a series of intervening P- and B-frames which only store the difference between 'now' and 'one frame before' or 'one frame after'. Unless you're on an I-frame you have to calculate the chain of differences from the nearest I-frame, and when editing or applying an effect we must re-calculate the entire GOP, so Premiere has to hold a lot of data in the buffer. Remember all timelines in Premiere are internally transcoded to 32-bit floating point, so it's more work to 'play' the footage in the monitors than would be done by a simple playback-only application such as VLC, or in some other brands of NLE that only work in the footage's color space. Premiere's hardware acceleration (MPE) only kicks in once the buffer has been ingested, all the decoding of the original H.264 frames happens in your CPU.
With digital cinema cameras and some hacked DSLRs, we record "all-I" footage - so there's no GOP overhead and playback/editing is massively smoother. I can scrub all-I footage from a hacked 7D no problem on my relatively-ancient spare laptop, but the long-GOP files from a factory 7D struggle to play at all. Our all-I 7D footage can hit 300MBit/s compared to 35 for long-GOP. Helmet cams such as the GoPro do all they possibly can to squeeze data onto their storage cards, which means they have long-GOP codecs that have some of the most complicated compression algorithms out there. The Hero3's implementation of H.264 uses the Ambarella chip, whose files are very small but an utter nightmare to decode - hence far more of a demand on your CPU than an equivalent clip from a DSLR.
Jim Simon wrote:
Might be the 35 Mbps that is causing the choppy playback.
It shouldn't, assuming sufficient hardware. My GH2 clips often get up to over 90 Mb/s and play just fine on an older i7 920.

Syncing Sound with Soundtrack Pro

Hi guys,
Having a bit of a nightmare with some audio in Final Cut Pro and Soundtrack Pro.
We've recored audio on a Sony FS-100 at (25fps, 48kHz) and synced it with audio from a Zoom H4n (48kHz). The FS-100 has been imported with Log and Transfer and the Zoom audio is being dragged in straight from the original .wav files.
Problem is, that once a clip gets past around 3 minutes the audio gradually becomes out of sync. I have managed to rectify the situation by changing the speed of the audio to 99.88% however the editor has already edited half the project without doing this (it's a 40 minute film). So I was wondering if there was a workaround?
Also when editing the audio in Soundtrack Pro and exporting as a .wav to put back into FCP, the file gradually creeps out of sync also.
Any ideas how to solve this?
Thanks very much,
Pumpkin

You need to create a new easy setup. go to audio video settings and choose all the appropriate settings. If you can't find exactly what you want, go in to each individual tab and duplicate and customize a preset and make sure it's checked. Then return to the first tab and "create easy setup."
After working in FCP since version 1, I recently discovered that creating and using the correct easy setup can solve a number of mysterious problems.

I need help with Quicktome Pro

Hi
Is there anyone that can help me by explaining in details how to edit TV shows with Quicktime Pro. Or, is there a better tool to edit .mpg files, in the mac world ?
Thanks

QuickTime Pro can't edit any muxed file format (MPEG 1 or 2 and Flash) and can only convert the video portion of the file to other formats.
MPEG Streamclip (free) can edit those files and convert them to QuickTime formats.

Help with soundtrack pro..breaking tracks up

Similar Messages

Maybe you are looking for