Help with speeding up Hadoop application with Jrockit vm

Hi all,
This is Grace. I am using JRockit JVM to run some Hadoop tests. In the test, there are many short time(within 1 minute) processes running. Comparing with the Sun JVM (with -Xmx option only), the test is completed much more slowly by Jrockit JVM. I have already tried to adjust some of the Jrockit basic options, such as –Xmx, -XXaggressive and etc. But there is no big difference. Have anyone seen this problem before? And does anyone can offer some advices about optimization or tuning? Thanks a lot for your time and help.
Here is some basic information of the testing environment:
OS: Redhat 5.3 x86_64
Sun vm version is 1.6.0_11 (64bits), Jrockit vm version is 3.1.0-1.6.0(64bits)
Regards, Grace

Most of your objects are large and goes to the old space. When you are running with a nursery all large objects are allocated in the old space. (An object larger than 2k is typically considered large). This will result in a lot of GC of the old space. I guess that this is causing a lof of memCopyBlock() which is the performance blocker.
So, I have a few suggestions:
* Always set initial heap size equal to maximum heap size. -Xms=Xmx (1024m in your case) Set the maximal heap size as large as possible (without resulting in page faults).
* With such high amount of large objects you could profit a static GC, for example -Xgc:singlepar (or -Xgc:genpar with a very small nursery).
* If the large objects in your application live shortly then you may still profit from using a nursery.
** Set GC strategy to -Xgc:genpar (or -Xgc:gencon) to get a nursery.
** You will also need to modify the threshold for large objects by setting: -XXlargeObjectLimit="a limit, a little larger than the size of your objects".
** Tune nursery size. You will probably have to test a few nursery sizes before you find the best suited nursery size
** I see that you tune TLA. TLA tuning is preferably combined with tuning the large object limit for example: -XXtlasize:min=4k, preferred=128k - XXlargeObjectLimit=4k
I would not use -XXaggressive if it does not give you performance improvements. The same for LazyUnlcoking - it gives a performance boost for some applications, but not all.
Edited by: TuvaPalm on May 12, 2009 6:08 AM

Similar Messages

Which is better approach to manage sharepoint online - PowerShell Script with CSOM or Console Application with CSOM?

Which is better approach to manage sharepoint online - PowerShell Script with CSOM or Console Application with CSOM?
change in sharepoint scripts not require compilation but anything else?

Yes, PowerShell is great, since you can quick change your code without compilation.
SP admin can write ps scripts without specific tools like Visual Studio.
With powershell you can use cmdlets,
which could remove a lot of code, for example restarting a service.
[custom.development]

Need help in registering HFM Sample applications with Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

Help w/speed of Flash application - Use load vars, flash remoting or other....

I'm looking for a little help with a dynamic Flash
application I am building with ColdFusion integrated. I need the
Flash to load and interact with a SQL Server database as quickly as
possible as the user interacts with the Flash application. I have
done research and thought that Flash Remoting was the way to go
especially when using ColdFusion with Flash, but I am experiencing
a lot of lag time when a user tries to load more data.
So I'm looking for some advice on what is the fastest/best
way to pass data back and forth between Flash and ColdFusion.
Currently I am using Flash Remoting via ColdFusion web services
(first time using this), but again with the lag time I am receiving
I am thinking maybe my old way of using LoadVars would be faster? I
am also open to any other means to pass data from ColdFusion/SQL
database to Flash that exist. I am just looking for the quickest
way for my customers to interact with the Flash piece.
Thanks for all your help!

Also would like to note that internet explorer does not have this problem, I would prefer to figure out why this is happening and resolve it as I hate IE.

I have a customer looking for a high speed vision system 500 fps. Anyone been successfull (or not) with this kind of application with NI hardware?

Stu

The digital boards can handle these high frame rates as long as the bytes/sec is within specs of the board, as Bruce mentioned. The question is still what you want to do with these images. You mentioned memory storage, how much memory will it take? The 1424 can have 80MBytes of onboard memory, so you could store it all there and then bring it to the host computer at your convienence. If you bring it directly to the host computer, keep in mind the maximum sustained bandwidth of the PCI bus is about 100 MBytes/sec and if you have 3 digital boards outputting data, this could be a limiting factor (overhead of the three boards communicating on PCI may reduce bandwidth also). Make sure you have plenty of RAM to hold all this data if you do bring it directly to t
he host computer. Graftek is very good at recommending specific cameras and Robert Eastlund with www.graftek.com (a imageing alliance member witrh NI) has done these type of applications before and could give you more specific advise.
So in summary, our boards should have no problem withg high frame rates as long as the cameras meet our specs (pixel clock of 40MHz max and the new 1424's have a 100MBytes/sec max data transfer)
Hope this helps,
Brad Buchanan
National Instruments

Need help creating a voice chat application with java

Hi, all:
I'm currently using MSN messenger to talk to my friends online. However, the quality gets pretty low sometimes since MSN is a centralized service. So I was wondering if I know a friend well, and he gives me his IP, would it be better for me to just write a simple java app that captures audio from a microphone and send it over through a socket. Once the byte stream gets there, his side of the app can play it back. Of course, the packets I'm sending and receiving will just be normal TCP/IP packets, but we wouldn't have to go through a MSN messenger server, so would the audio quality be better in this case?

Maybe, but there is probibly other software you can use for direct connections. I would try these first.

Dealing with a turn based application with using a global static variable

Hi there. I read some articles about JavaFX concurrency,so as a newbie i have to practice on it. Now i'm trying to implement a turn based application that can be played among 3-6 players. Moreover, i use a scene imported from a .fxml file and i have to update it correctly depends on some calculations of each thread (in other word players ). My main issue is, i don't wanna use a while loop which checks the state of game like;
while( GameState != State.GAME_OVER ){
     currentPlayer = GameBoard.getNextPlayer();
     // do some actions,calculations etc.
So, i want to use worker threads instead of this while loop. I guess using Service class for iterating and assigning the next player will be suitable instead of using the while loop and Tasks for doing each player's calculation,or waiting for some responses from Human players on UI based,however, i'm struggling with two problems.
There should a global static variable ( like GameState which is an Enumarator ) determines the state of the game,so it should be updated and should be checked by each turn. Is there any way to do this ?
How can i get rid off this while loop ?
I will appreciate for every answer. Thanks anyway.

It shouldn't make too much difference. The basic idea is that you have a model class representing your game state (the Game class in jsmith's example). When a player makes a move, you update the state of the game. Since this will result in changes to the UI, this update should be performed on the FX Application Thread.
If the player making the move is a human player, the move will likely be made by a user action (button press or mouse click, etc); this will be handled on the FX Application thread anyway.
When the state of the game changes so it is the turn of an "artificial" player to make a move, have the object representing the artificial player calculate its next move, and then update the game state. Since this is a response to the game state changing (it's now the turn of the artificial player), this will also be on the FX Application Thread.
The only (slight) complexity comes if the calculation of the move for the artificial player takes a long time. You don't want to perform this long running calculation on the FX Application Thread. The cleanest way to manage this is to launch a Task which calculates the desired move, and then updates the game state when the move is ready. So, something like this:
GameState game = ... ;
// UI is bound to the game state.
ExecutorService executorService = ... ;
final Player currentPlayer = game.getCurrentPlayer() ;
final Task<Move> calculateMoveTask = new Task<Move>() {
     @Override
     public Move call() {
          Move move = // compute next move...
          return move ;
calculateMoveTask.setOnSucceeded(new EventHandler<WorkerStateEvent>() {
     @Override
     public void handle(WorkerStateEvent event) {
          gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
executorService.submit(calculateMoveTask);
If you're doing more threading than that, you're probably doing it wrong... . There should also be no need for anything to be held as a "global" static variable (the idea above is the only structural modification you need to the example posted by jsmith).

Database connection with EJB and Sun Application Server

I have tried some tutorials from sun in Savings account eg some errors were
showing like primary key not found etc
please help me to link EJB application with database application

Debated: Primary Key requirement
Does a GOOD database require a PK? Yes.
Does EVERY database require a PK? Debated.
Your db table needs a primary key. The PK is how a table identifies unique records.

How to combine two applications with different workspaces in APEX

Hi,
Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
Thanks in advance,

Hello Satya,
>> I am Satya …
Please take one more step to help us and update your forum handle to something friendlier than user123… Thanks.
>> Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
This is not a trivial task.
You didn’t mentioned if both workspaces sharing the same APEX instance, or they are on two different instances (machines). I believe the latter is a pre-condition to a success.
First you need to remember that importing an APEX component, like a single page, is possible only to the same application that it was exported from. This is still valid if you have the same workspace on two separate APEX instances – one is an import of the other (which makes it an identical copy). Still, the application ID must be the same, or you’ll get the following error: “This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.”
You can’t simply manipulating the export file, if the two workspaces are sharing the same APEX instance, as all workspaces on the same instance shares the same APEX metadata files, and you’ll receive a “unique constraint violated” error messages. That means you can’t import one application into the workspace of the other, even if you are using a different application ID.
As far as I can see, the only viable way of doing an application merge is to have two identical workspaces, on two separate APEX instances. The two applications should share the same application ID, although this parameter can be changed in the import file. You should export the page in one application – on the first instance – and import it into the other application – on the second instance.
You should also make sure that the exported page ID doesn’t exist on the target application, otherwise it will be replaced by the new imported page. Also, if the imported page include references to shared components that are not defined on the second application, it might also pose a problem.
As I said, this is not trivial. The benefits are mostly depend on the amount and complexity of the pages you want to merge. If they are not many, and simple, you should consider just re-creating them on the target application. If they are very complex, the merge might fail anyway.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

Interacting with Camera Application with AS

Hello everbody,
I need help using the phone Camera application with
FlashLite.
For a Flashapp I need the camerafunction to make a photo
which should be sent
to a server. It works with a absolute path like
("z:\\system\\apps\\CamMojave\\CamMojave.app")
for NOKIA N90. But that makes no sense for application which
should run on different models.
Is it possible to launch the camera with a relativ path or it
there a other way to use the camera??
thanx for help.
nick

I'd be intetested in knowing this too. How about iTunes? I don't use Media Source at all.
Thanks,
Steven

Is it possible to implement a c# application with embedded flash player on WinCE

I have read a great article from Mike Chambers:
Embedding Flash Player in Windows Applications using C#. I
think the solution works fine in PC environment, but I need to
develop a similar C# application with embedded flash player which
runs on WinCE environment(including Pocket PC and SmartPhone). My
questions are:
1. Is it possible to develop the C# application with
embedded flash player on WinCE environment?
2. If question 1 is possible, how can I install the
"Macromedia Flash Player ActiveX control for PPC" into my Visual
Studio .NET on PC environment for development?
3. Can the "Flash Player for Pocket PC Distribution Kit"
help to package the C# application with flash player? Do I have to
use that to package my C# application for WinCE?

> The the question1: should we mapping a another
"Shockwave Flash Object"
> com
> object file for WinCE OS in the Visual Studio IDE, then
we could develop
> the
> applicaton using Flash ActiveX Object in WinCE.
>
> question2: If question1 is yes, where can we find this
com object file ?
You cannot do this natively - .NET does not natively support
AX controls.
You can achieve this with CFCOM
http://www.odysseysoftware.com/products_cfcom.asp
or with OpenCF.NET
http://www.opennetcf.org/ .
OpenCF is free.
Alternatively, it is possible to build your own COM wrapper
using C++ but I
don't know how to achieve this.
Steve
ACE - Adobe Community Expert
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com

JRockit for applications with very large heaps

I am using JRockit for an application that acts an in memory database storing a large amount of memory in RAM (50GB). Out of the box we got about a 25% performance increase as compared to the hotspot JVM (great work guys). Once the server starts up almost all of the objects will be stored in the old generation and a smaller number will be stored in the nursery. The operation that we are trying to optimize on needs to visit basically every object in RAM and we want to optimize for throughput (total time to run this operation not worrying about GC pauses). Currently we are using hugePages, -XXaggressive and -XX:+UseCallProfiling. We are giving the application 50GB of ram for both the max and min. I tried adjusting the TLA size to be larger which seemed to degrade performance. I also tried a few other GC schemes including singlepar which also had negative effects (currently using the default which optimizes for throughput).
I used the JRMC to profile the operation and here were the results that I thought were interesting:
liveset 30%
heap fragmentation 2.5%
GC Pause time average 600ms
GC Pause time max 2.5 sec
It had to do 4 young generation collects which were very fast and then 2 old generation collects which were each about 2.5s (the entire operation takes 45s)
For the long old generation collects about 50% of the time was spent in mark and 50% in sweep. When you get down to the sub-level 2 1.3 seconds were spent in objects and 1.1 seconds in external compaction
Heap usage: Although 50GB is committed it is fluctuating between 32GB and 20GB of heap usage. To give you an idea of what is stored in the heap about 50% of the heap is char[] and another 20% are int[] and long[].
My question is are there any other flags that I could try that might help improve performance or is there anything I should be looking at closer in JRMC to help tune this application. Are there any specific tips for applications with large heaps? We can also assume that memory could be doubled or even tripled if that would improve performance but we noticed that larger heaps did not always improve performance.
Thanks in advance for any help you can provide.

Any suggestions for using JRockit with very large heaps?

Help needed in running the RMI application with multiple clients

Hi
I have my RMI application with one server and 6 clients. I keep all the server and client programs in the same directory. When i run the clients, the first 2 clients work properly but when the third or the fourth client starts, it works normally in getting the data and after a while it crashes. If teh third crashes the 4th works and if the 4th crashes the 3rd, 4th and 5th works ...randomly atleast one or 2 clients crash always.
following is the error message generated for a client named controller:
[ code ]
Exception in thread "main" java.lang.NullPointerException
at PostOfficeImpl.isinputAvail(PostOfficeImpl.Java:315)
at PostOfficeImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
at sun,rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun,rmi.transport.Transport.serviceCall(Transport.java:149)
at sun,rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun,rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at PostOfficeImpl_Stub.isinputAvail(Unknown Source)
at CONTROLLER.main(CONTROLLER.java:167)
my ser ver program is as follows:
class PostOfficeServer extends java.rmi.server.UnicastRemoteObject implements java.rmi.Remote {
// Instance of ourselves
public static String name;
private static PostOfficeServer rmi;
// public No-argument constructor
public PostOfficeServer() throws RemoteException {
     super();
public static void main(String[] args){
if(System.getSecurityManager() == null) {
     System.setSecurityManager(new RMISecurityManager());
try {
     new PostOfficeServer();
     PostOffice postOfficeserver = new PostOfficeImpl();
try {
     getIP ipAdd1 = new getIP();
     String ip1 = ipAdd1.getIP();
     name = "//" + ip1 + "/PostOffice";
catch (Exception e){
     System.out.println();
Naming.rebind(name, postOfficeserver);
System.out.println("RemoteServer bound");
System.out.println("initialise Data Structure");
postOfficeserver.initDatastructure();
System.out.println("initilised");
catch (java.rmi.RemoteException e) {
     System.out.println("Cannot create remote server object");
catch (java.net.MalformedURLException e) {
     System.out.println("Cannot look up server object");
System.out.println("Server started.");
System.out.println("Enter <CR> to end.");
try {
     int serve2end = System.in.read();
}catch (IOException ioException) {
System.exit(0);
//endoffilePlease advise as this is very urgent

Hi
the following is the code for PostOfficeImpl...its a long code but i include it so that I get your help please...
import java.io.*;
import java.net.*;
import java.lang.*;
import java.rmi.*;
import java.rmi.server.*;
import java.rmi.RemoteException;
import java.util.HashMap;
import java.util.*;
public class PostOfficeImpl extends java.rmi.server.UnicastRemoteObject implements PostOffice {
//Implementations must have an explicit constructor in order to declare the
//RemoteException exception
public PostOfficeImpl() throws java.rmi.RemoteException {
     super();
public static LinkedListImpl list = new LinkedListImpl();
public static oListImpl ovarList = new oListImpl();
public static iListImpl ivarList =new iListImpl();
public static lipsList llfirst;
public static oList opchannel, ofirst, onext;
public static iList ipchannel, ichan, ifirst;
public static String[] variNumber= new String[100];
public static String[] inoutChan, inChan, outChan,inVAR, invarLIST,outVAR, outvarLIST ;
public static String[][] driveMat;
DriverMatrix_mthds drive = new DriverMatrix_mthds();
private static Boolean All_Vacant;
private static Boolean tAll_Vacant;
public void sendAll_Vacant(Boolean All_Vacant) throws RemoteException {
     tAll_Vacant = All_Vacant;
public Boolean getAll_Vacant() throws RemoteException{
      return tAll_Vacant;
public void initDatastructure() throws RemoteException{
ifirst = null;
ofirst=null;
int i=0, j=0, k=0, ind1=0, ind2=0;
try{/// initialise list
     drive = new DriverMatrix_mthds();
     drive.VarTypeArray();
     drive.nodeHeadVarType();
     String[] variablel = drive.Variablelist();
     drive.lipsvariablist();
     drive.NodeOrigin();
drive.nodeInput();
     drive.numOfnodes();
     drive.noOfVariables();
     drive.Assignlist();
     drive.novarType();
     drive.varNameType();
     drive.nodeNumName();
     drive.driverMat();
     String[][] lookupvar = drive.varNameType();
     //tempdrive = drive.driverMat();
     long leng1 = variablel.length;
     int varlistlength = (int) leng1;
     int counter;
     String s1="";
     String s2="";
     String s3 = "";
     String s4 = "";
     String s6 = "";
     int s5=0, c=0;
     while(variablel[k] !=null){
          k=k+1;
     int i1, j1;
     String varname, varnumber;
     varnumber = "";
while(i<=variablel.length-1){
     if(variablel!=null){
     c=c+1;
     i=i+1;
try{
     ind1=0; ind2 = 0;i=0;
while(!(variablel[i].equals("end of file"))){
     s1 = variablel[i];
     i=i+1;
     s2 = variablel[i];
     i=i+1;
     System.out.println("     " + s1+"     "+s2);
while(!(variablel[i].equals("end of input variable"))){
     s4 = variablel[i];
     i1=0;
     Brkwhile:while(i1<=lookupvar.length-1){
     j1=1;
     if(lookupvar[i1][j1] != null){
     if(lookupvar[i1][j1].equals(s4)){
          s3 = lookupvar[i1][0];
          break Brkwhile;
     i1=i1+1;
//ifirst.varNum = varnumber;
s5 = 0;
s6 = null;
ifirst= new iList(s3,s4, s5, s6);
ivarList.add(ifirst);
System.out.println(s3+"     "+s4+"     "+s5+"     "+s6);
i=i+1;
i = i + 1;
System.out.println("input list finished ");
while(!(variablel[i].equals("end of output variable"))){
     s4 = variablel[i];
     i1=0;
     j1=1;
     Brkwhile:while(lookupvar[i1][j1] != null){
          if(lookupvar[i1][j1].equals(s4)){
          s3 = lookupvar[i1][0];
          break Brkwhile;
     i1=i1+1;
     s5 = 0;
     s6 = null;
     ofirst= new oList(s3,s4, s5, s6);
     ovarList.add(ofirst);
     System.out.println(s3+"     "+s4+"     "+s5+"     "+s6);
     i=i+1;
     llfirst = new lipsList(s1, s2, ivarList, ovarList);
     list.add(llfirst);
     System.out.println("output list finished ");
     i=i+1;
     catch (NullPointerException ne){
     catch (Exception d){}
public int isitOK(reqPacket sndNodetail)
     throws RemoteException{
     String nodnum = sndNodetail.srcNum;
     String varnum = sndNodetail.varNum;
     int status = 0;
     llfirst = list.getFirst();
     try{mainbegin:while (llfirst != null){
          if((llfirst.nodeNum).equals(nodnum)){
          ofirst = ovarList.getFirst();
          while(ofirst != null){
               if((ofirst.varNum).equals(varnum)){
               if(ofirst.varVal==null){
               status = 1;
               break mainbegin;
     ofirst = ofirst.next;
     llfirst = llfirst.next;
     catch (NullPointerException nl){}
     return status;
public int senData(dataPacket sendToRTS)
     throws RemoteException{
dataPacket datDetail = sendToRTS;
String nnum, vnum,typename, dval;
String dtype = "";
nnum = datDetail.nodeNum;
vnum = datDetail.varNum;
typename = datDetail.dataType;
dval = String.valueOf(datDetail.dataVal);
String [][] tempdrive, varnametype;
int status =0;
System.out.println("data received is from node " nnum " is "+ dval+"var num " +vnum);
status =0;
try{
//DriverMatrix_mthds drive = new DriverMatrix_mthds();
drive.VarTypeArray();
drive.Variablelist();
drive.NodeOrigin();
drive.nodeInput();
drive.numOfnodes();
drive.noOfVariables();
String[][] lookupvar = drive.novarType();
drive.varNameType();
drive.nodeNumName();
drive.driverMat();
tempdrive = drive.driverMat();
String varname="";
int i,j;
//with the recived var name get the var num
for(i=0; i<=lookupvar.length-1; i++){
     j=0;
     if(lookupvar[i][j] != null){
          if(lookupvar[i][j].equals(typename)){
               dtype = lookupvar[i][1];
     }//varname is moved to dtype n used for checking
     for(i=0; i<=tempdrive.length-1; i++){j=0;
     if (tempdrive[i][j] != null){
     if (tempdrive[i][0].equals(vnum)){
          if (tempdrive[i][1].equals(nnum)){
          if(tempdrive[i][2].equals(dtype)){
          status = 1;
     }//System.out.println("received data " vnum " "+ nnum +" " + dtype +" "+dval);// after checking status if the status is 1 then set the counter n olist// to no of times the value has to be ditributed
int Ccount =0;
//opchannel = llfirst.olist;
try{
     System.out.println("status"+status);
     if (status == 1){
          llfirst = list.getFirst();
     mainWhile: while (llfirst != null){
          if((llfirst.nodeNum).equals(nnum)){
               ofirst = ovarList.getFirst();
               while(ofirst != null){
               if((ofirst.varNum).equals(vnum)){
                    ofirst.varVal =dval;
                    //setting the counter for the varname
                    //check driver matrix fr the no of occurances
               for(i=0; i<=tempdrive.length-1; i++){
               j=0;
               if (tempdrive[i][j] != null){
                    if (tempdrive[i][0].equals(vnum)){
                    for(j= j+3;j<=tempdrive.length-1;j++){
                    if(tempdrive[i][j] != null){
                    if(tempdrive[i][j].equals("1")){
                    Ccount = Ccount + 1;
System.out.println("count"+Ccount);
ofirst.counter = Ccount;
ofirst.varNum = vnum;for(i=0; i<=lookupvar.length-1; i++){
for(j=0; j<=2; j++){
     if(lookupvar[i][j] != null){
     if(lookupvar[i][j].equals(vnum)){
          varname = lookupvar[i][1];
     ofirst.varName = varname;
     Ccount=0;
     break mainWhile;
     ofirst = ofirst.next;
     llfirst = llfirst.next;
     catch(NullPointerException s){}
/*use the vnum in the driver matrix and find out the nodes to which this variable
*has been sent as input , i mean destination nodes..
*find the node numbers ..knowing the node numbers parse through data structure
and set the input values to value and status 1./
llfirst = list.getFirst();
while(llfirst != null){
     ifirst = llfirst.ilist.getFirst();
     while(ifirst != null){
          if (ifirst.varNum.equals(vnum)){
          ifirst.varStat = 1;
          ifirst.varVal = dval;
          //     System.out.println("nodenum "+llfirst.nodeNum+" varval     " + ifirst.varVal +"     stat "+ifirst.varStat+" vnum " + ifirst.varNum);
     ifirst=ifirst.next;
     llfirst=llfirst.next;
     catch (Exception e){};
     return status;
public int isinputAvail(reqPacket inputReq)
     throws RemoteException{
     String srcnum = inputReq.srcNum;
     String varnum = inputReq.varNum;
     int availstatus =0;
     llfirst = list.getFirst();
     //System.out.println("llfirst.nodeNum     "+ llfirst.nodeNum);
     whileloop:while (llfirst != null){
          if((llfirst.nodeNum).equals(srcnum)){
          ifirst = llfirst.ilist.getFirst();
          breakloop: while(ifirst != null){
          //System.out.println("var num " + varnum + "     " + "status outside" + ifirst.varStat);
          if((ifirst.varNum).equals(varnum)){
          if (ifirst.varStat == 1){
               availstatus = 1;
               ifirst.varStat = 0;
               // System.out.println("var num " + varnum + "     " + "status" + availstatus);
               break whileloop;
     ifirst = ifirst.next;
     llfirst = llfirst.next;
     //System.out.println("var num " + varnum + "     " + "status" + availstatus);
     return availstatus;
public dataPacket senDatatoNode(reqPacket sendFromRTS)
     throws RemoteException {
     String nnum, vnum, dtype, dval;
     //nnum = "";
     dtype="";
     //opchannel = llfirst.olist;
     //     ipchannel = llfirst.ilist;
     reqPacket sendfromrts = sendFromRTS;
     nnum = sendfromrts.srcNum;
     vnum = sendfromrts.varNum;
     //     dtype = sendFromRTS.dataType;
     dval = "";
     int ctrchk=0;
     try{
     //send data to process node n reduce the counter by 1
     llfirst = list.getFirst();
          mainWhile: while (llfirst != null){
          if((llfirst.nodeNum).equals(nnum)){
          ofirst = llfirst.olist.getFirst();
     whileofirst: while(ofirst != null){
          if((ofirst.varNum).equals(vnum)){
          dval = ofirst.varVal;
          ofirst.counter = ofirst.counter - 1;
          //     System.out.println(ofirst.counter);
          ctrchk=ofirst.counter;
          break whileofirst;
     ofirst = ofirst.next;
//set the status of respective input channel to 0 as data has been sent
     ifirst = llfirst.ilist.getFirst();
     if(ctrchk == 0){
     whileifirst: while(ifirst != null){
          if((ifirst.varNum).equals(vnum)){
          //ifirst.varVal = dval;
          ifirst.varStat =0;
          break whileifirst;
     llfirst = llfirst.next;
     //System.out.println(llfirst);
     catch(NullPointerException s){}
//find type
try{
     DriverMatrix_mthds driver = new DriverMatrix_mthds();
     driver.VarTypeArray();
     driver.Variablelist();
     driver.NodeOrigin();
     driver.nodeInput();
     driver.numOfnodes();
     driver.noOfVariables();
     driver.novarType()     ;
     String[][] lookupvar = driver.varNameType();
     int i, j;
     String varNum = vnum;
     for(i=0; i<=lookupvar.length-1; i++){
          j=0;
          if(lookupvar[i][j] != null){
          if(lookupvar[i][j].equals(vnum)){
          dtype = lookupvar[i][2];
     catch (Exception d){}
     dataPacket retpac = new dataPacket(nnum, vnum, dtype, dval);
     System.out.println("msg sent "+ nnum +"     " + vnum+" "+ dtype+"     "+ dval);
     return retpac;
public String findnodeName(String nodeNum)
     throws RemoteException{
String nnum = nodeNum;
llfirst = list.getFirst();
while (llfirst != null){
     if((llfirst.nodeNum).equals(nnum)){
     return llfirst.nodeName;
     llfirst = llfirst.next;
     System.out.println("node Number does not match with the list of node numbers generated..try again");
     return null;
//find the nodenum given the node name
public String findnodenum(String nodename)
     throws RemoteException{
     String nodenumber ="";
     String nodname = nodename;
     try{DriverMatrix_mthds driver = new DriverMatrix_mthds();
     driver.VarTypeArray();
     driver.Variablelist();
     driver.NodeOrigin();
     driver.nodeInput();
     driver.numOfnodes();
     driver.noOfVariables();
     driver.novarType()     ;
     driver.varNameType();
     String[][] lookupnode = driver.nodeNumName();
     int i, j;
     for(i=0; i<=lookupnode.length-1; i++){
     for(j=0; j<=2; j++){
          if(lookupnode[i][j] != null){
          if(lookupnode[i][j].equals(nodname)){
               nodenumber = lookupnode[i][2];
     catch (Exception d){}
     return nodenumber;
public String findvarnum(String variablename)
     throws RemoteException{
     String varnumber = "";
     try{
     DriverMatrix_mthds driver = new DriverMatrix_mthds();
     driver.VarTypeArray();
     driver.Variablelist();
     driver.NodeOrigin();
     driver.nodeInput();
     driver.numOfnodes();
     driver.noOfVariables();
     driver.novarType()     ;
     String[][] lookupvar = driver.varNameType();
     int i, j;
     String varname = variablename;
     for(i=0; i<=lookupvar.length-1; i++){
     for(j=0; j<=2; j++){
          if(lookupvar[i][j] != null){
          if(lookupvar[i][j].equals(varname)){
               varnumber = lookupvar[i][0];
catch (Exception d){}
return varnumber;
public String findvartype(String varname)
     throws RemoteException{
     String vartype = "";
     try{
     DriverMatrix_mthds driver = new DriverMatrix_mthds();
     driver.VarTypeArray();
     driver.Variablelist();
     driver.NodeOrigin();
     driver.nodeInput();
     driver.numOfnodes();
     driver.noOfVariables();
     driver.novarType();
     String[][] lookupvar = driver.varNameType();
     int i, j;
     String varName = varname;
     for(i=0; i<=lookupvar.length-1; i++){
     for(j=0; j<=2; j++){
          if(lookupvar[i][j] != null){
          if(lookupvar[i][j].equals(varName)){
               vartype = lookupvar[i][2];
catch (Exception d){}
return vartype;
public String findtypenum(String vartype){
String varnum = "";int i;
try{
     DriverMatrix_mthds driver = new DriverMatrix_mthds();
     driver.VarTypeArray();
     driver.Variablelist();
     driver.NodeOrigin();
     driver.nodeInput();
     driver.numOfnodes();
     driver.noOfVariables();
     String varNum[][] =      driver.novarType()     ;
     String varType = vartype;
     for(i=0; i<=9-1; i++){
          if(varNum[i][0] != null){
          if(varNum[i][0].equals(varType)){
               varnum = varNum[i][1];
catch (Exception d){}
return vartype;
//return input variable list
public String[] inoutchanlist(String nodenum, String nodenam)
     throws RemoteException{
try{
     DriverMatrix_mthds drive = new DriverMatrix_mthds();
     String[] varLIST = drive.Variablelist();
     int i=0;int j;
     while(varLIST[i]!=null){
          i=i+1;
     int arrlength = i;
     inoutChan = new String[arrlength];
     i=0; j=0;
     WHILELOOP:
     while(!(varLIST[i].equals("end of file"))){
     while(varLIST[i].equals(nodenum)){
          i=i+1;
          while(varLIST[i].equals(nodenam)){
               i=i+1;
               while(!(varLIST[i].equals("end of input variable"))){
                    inoutChan[j] = varLIST[i];
                    i=i+1;
                    j=j+1;
          System.out.println("endofinput");
          inoutChan[j]="endofinchan";
          j=j+1;
          i=i+1;
          while(!(varLIST[i].equals("end of output variable"))){
     inoutChan[j] = varLIST[i];
     i=i+1;
     j=j+1;
     System.out.println("endofoutput");
     inoutChan[j]="endofoutchan";
     break WHILELOOP;
     i=i+1;
     arrlength =j;
     for(j=0; j<=arrlength-1; j++){
     System.out.println(inoutChan[j]);
     catch (Exception e){}
     return inoutChan;
public String[] inchannel(String[] inoutChan) throws RemoteException{
int count=0;int i=0, j=0;
System.out.println("entered");
while(inoutChan[count]!=null){
     System.out.println(count + " " +inoutChan[count]);
     count=count+1;
     inChan = new String[count];
     while(!(inoutChan[i].equals("endofinchan"))){
     inChan[j] =inoutChan[i];
     j=j+1; i=i+1;
return inChan;
public String[] outchannel(String[] inoutChan) throws RemoteException{
int count=0;int i=0, j=0;
System.out.println("entered");
while(inoutChan[count]!=null){
     System.out.println(count + " " +inoutChan[count]);
     count=count+1;
     outChan = new String[count+1];
     while(!(inoutChan[i].equals("endofinchan"))){
          i=i+1;
     i=i+1;
     while(!(inoutChan[i].equals("endofoutchan"))){
          outChan[j] =inoutChan[i];
          j=j+1; i=i+1;
     return outChan;
public String[] invarChan(String nodename, int guardno)throws RemoteException{
try{
DriverMatrix_mthds drive = new DriverMatrix_mthds();
invarLIST = drive.invarlist();
int i=0;int j;
while(invarLIST[i]!=null){
     i=i+1;
     int arrlength = i;
     inVAR = new String[arrlength];
     i=0; j=0;
          WHILELOOP: while(!(invarLIST[i].equals("end of file"))){
               if (invarLIST[i].equals(nodename)){
     i=i+1;
     while(!(invarLIST[i].equals(nodename+String.valueOf(guardno)))){
     i=i+1;}
     i=i+1;
     while(!(invarLIST[i].equals("endofguard"))){
     System.out.println(invarLIST[i]);inVAR[j]=invarLIST[i]; i=i+1; j=j+1;}
     break WHILELOOP;}
     i=i+1;}
}catch (Exception d){}
return inVAR;
public String[] outvarChan(String nodename, int guardcount)throws RemoteException{
     try{
     DriverMatrix_mthds drive = new DriverMatrix_mthds();
     outvarLIST = drive.outvarlist();
     int i=0;int j;
     while(outvarLIST[i]!=null){
          i=i+1;
     int arrlength = i;
     outVAR = new String[arrlength];
     i=0; j=0;
     WHILELOOP: while(!(outvarLIST[i].equals("end of file"))){
          if (outvarLIST[i].equals(nodename)){
               i=i+1;
               while(!(outvarLIST[i].equals(nodename+String.valueOf(guardcount)+"guard"))){
                    i=i+1;}
          i=i+1;
          while(!(outvarLIST[i].equals("end guard"))){
          System.out.println(outvarLIST[i]);outVAR[j]=outvarLIST[i]; i=i+1; j=j+1;}
          break WHILELOOP;}
     i=i+1;}
}catch (Exception d){}
return outVAR;
private static Boolean start;
private static Boolean tstart;
public void sendstart(Boolean start) throws RemoteException {
     tstart = start;
public Boolean getstart() throws RemoteException{
     return tstart;
private static Boolean done;
private static Boolean tdone;
public void senddone(Boolean done) throws RemoteException {
     tdone = done;
public Boolean getdone() throws RemoteException{
     return tdone;
private static Boolean vac_busy1;
private static Boolean tvac_busy1;
public void sendvac_busy1(Boolean vac_busy1) throws RemoteException {
     tvac_busy1 = vac_busy1;
public Boolean getvac_busy1() throws RemoteException{
     return tvac_busy1;
private static int cus1_rit1;
private static int tcus1_rit1;
public void sendcus1_rit1(int cus1_rit1) throws RemoteException {
     tcus1_rit1 = cus1_rit1;
public int getcus1_rit1() throws RemoteException{
     return tcus1_rit1;
private static int cus1_rit2;
private static int tcus1_rit2;
public void sendcus1_rit2(int cus1_rit2) throws RemoteException {
     tcus1_rit2 = cus1_rit2;
public int getcus1_rit2() throws RemoteException{
     return tcus1_rit2;
private static int cus1_rit3;
private static int tcus1_rit3;
public void sendcus1_rit3(int cus1_rit3) throws RemoteException {
     tcus1_rit3 = cus1_rit3;
public int getcus1_rit3() throws RemoteException{
     return tcus1_rit3;
private static int cus1_it1;
private static int tcus1_it1;
public void sendcus1_it1(int cus1_it1) throws RemoteException {
     tcus1_it1 = cus1_it1;
public int getcus1_it1() throws RemoteException{
     return tcus1_it1;
private static int cus1_it2;
private static int tcus1_it2;
public void sendcus1_it2(int cus1_it2) throws RemoteException {
     tcus1_it2 = cus1_it2;
public int getcus1_it2() throws RemoteException{
     return tcus1_it2;
private static int cus1_it3;
private static int tcus1_it3;
public void sendcus1_it3(int cus1_it3) throws RemoteException {
     tcus1_it3 = cus1_it3;
public int getcus1_it3() throws RemoteException{
     return tcus1_it3;
private static int stkit_11;
private static int tstkit_11;
public void sendstkit_11(int stkit_11) throws RemoteException {
     tstkit_11 = stkit_11;
public int getstkit_11() throws RemoteException{
     return tstkit_11;
private static int stkit_12;
private static int tstkit_12;
public void sendstkit_12(int stkit_12) throws RemoteException {
     tstkit_12 = stkit_12;
public int getstkit_12() throws RemoteException{
     return tstkit_12;
private static int stkit_13;
private static int tstkit_13;
public void sendstkit_13(int stkit_13) throws RemoteException {
     tstkit_13 = stkit_13;
public int getstkit_13() throws RemoteException{
     return tstkit_13;
private static int c1_it1;
private static int tc1_it1;
public void sendc1_it1(int c1_it1) throws RemoteException {
     tc1_it1 = c1_it1;
public int getc1_it1() throws RemoteException{
     return tc1_it1;
private static int c1_it2;
private static int tc1_it2;
public void sendc1_it2(int c1_it2) throws RemoteException {
     tc1_it2 = c1_it2;
public int getc1_it2() throws RemoteException{
     return tc1_it2;
private static int c1_it3;
private static int tc1_it3;
public void sendc1_it3(int c1_it3) throws RemoteException {
     tc1_it3 = c1_it3;
public int getc1_it3() throws RemoteException{
     return tc1_it3;
//endoffile

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

HT1386 Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!

Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!
How is this possible? How can the iTunes eat what I bought and what for? To buy the applications again?! Geez!
Tell me the solution. It must exist one!

You can redownload you previously purchased apps for free as long as they are still available in the app store. Be sure you are logged into the Apple ID in iTunes used to purchase them, then follow this guide: http://support.apple.com/kb/HT2519.

Help with speeding up Hadoop application with Jrockit vm

Similar Messages

Maybe you are looking for