Help with starting a new website

I am using iweb for the first time and trying to publish. I have put all info in on iweb settings and it says that it is working right, but I'm not seeing the website. It can't be found. So I have gone to my ftp server and it is showing it in the public_html area under cgi-bin where it's not suppose to go. Help

So I have gone to my ftp server and it is showing it in the public_html area under cgi-bin where it's not suppose to go. Help
Can't you just go back and move all the stuff out of cgi-bin? I can't imagine why iWeb would put it there in the first place unless some of the ftp settings were wrong. But you can also publish to a folder and use a separate ftp app like Cyberduck to make sure you upload things to the right place.

Similar Messages

I made several websites in iweb. since upgrading to 10.8.. NONE of them work. they all show up with 'start a new website' upon launching iweb! HELP!!! x

i made several websites in iweb. since upgrading to 10.8. NONE of them work. they all show up with 'start a new website' upon launching iweb! HELP!!! i have copied all domain files along with the folders to new macbook pro... nada!! i'm kinds freaking out... any advise would be greatly appreciated! thank you ...x

See this page for using iWeb with Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords. More than one account downloaded from older Laptop. Now the computer has the turning wheel in from of gray screen and won't go any further when

I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se. I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc. Can't keep them straight even though I write everything down. The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black. When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that. Then I held the on button in the back until the screen went black again.
What should I do? Is there a way to combine all my accounts into one account with one Apple ID? I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them.
In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
Very confused. Any Ideas about how I can get the computer to start up again and show a new screen?
Thanks to anyone who has workable suggestions.

If you really believe that your system has been compromised, here's what you do:
Disconnect your Mac from your cable modem;
Back up any documents on your system that are important to you;
Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
Choose a language and click the arrow button to continue;
From the Utilities menu, choose Disk Utility;
In Disk Utility, select your computer's hard drive;
Click the "Erase" tab;
Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
Click the "Erase" button and allow it to process;
Once the "erase process has completed (it will take a while), reinstall Mac OS X.
Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
Regards.

Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.

Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.

iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
But no, I'm not aware of any problems that not having it associated causes.

Help with start up probs after force quit

Hi there . I think I'm royally fckd. I was on blogger and my screen froze no cursor move nothing had to force quit. Now every time I try to turn on the MacBook Air all I get is a black screen and that start up noise over over over again . still black screen and no log in page . Is there a way to fix this or is it royally gone to mac heaven.help with thanks .

your force quit wouldn't cause an inability to powerup. Black screen on every powerup?
SSD or logic board fault likely.
Contact Apple for diagnostic/ repair.
Anything in your Air can be fixed yes.

New User needs help with starting SDK

I downloaded the J2EEsdk-1_4 files and completed the installation. I have looked at all the tutorials and quick-start documentation, but cannot find how to begin building an application. All I needed was very minimal Java parts to write a "Hello World" program for a class, but it prompted me to get the whole package.
How do I get to a prompt window to write some code, then compile it, then run it? I tested the local server as it suggested and it is working, and I ran their sample program and it worked.
I just need a pointer to get me started. I don't need all the web deployemnt stuff, etc....
Sorry for the silly questions but you gotta start somewhere.
Thanks

Brent In Iowa, you're on the Air.
Thanks for taking my call, Larry.
Umm, yes, I'd like to ask Mr. McNealy a question.
Go ahead.
umm, yes, Mr. McNealy. I like your language
Thanks, Brent. We hope with developers like you, to make it the most widely used language in the world. It's people like you that will helps us squash that bastard Gates and make me...umm, I mean Sun Microsystems the richest company known to man-kind.
Yeah but that's my problem Mr. McNealy. How do I write Hello World?
First, Brent, ya gotta download the right SDK. Not the J2EE but the J2SE. Then ya gotta follow the links on the let for the tutorials.
Thanks for your question. Our next caller, George is in Boise, Idaho. Hello, Boise.

Please help with start problem of my new X61s

I baught my X61s 2 weeks ago. It was received with vista home installed. I downgraded it to XP myself 1 week ago and it was working very well. Today, when I turned on the machine, nothing appeared on the screen, and I only hear about 7 beeps. I tried to turn off and turn on the machine several times, but no difference. I don't know what happen.
Please help me! Thanks.

Per the magic beep decoder ring that might mean bad DIMM or system board.
I don't work for Lenovo. I'm a crazy volunteer!

New timecapsule need help with start up

I recently switched to an iMac from a Dell and now am trying to add a timecapsule primarily for automated back up although if I can use the print feature that would be a nice added benefit. I have a modem/router from Consolidated Communications which is located in a different room than my computer. My preference would be to have the timecapsule located with the computer so that I can back up more quickly over ethernet and have my printer plugged into the timecapsule so that my iPad and other laptops can access it. Is this possible? I have tried setting the timecapsule up wireless as well as plugged directly into the router, in both cases I cannot get a valid ip address and then have trouble with my iMac accessing my existing network as it tries to connect through the timecapsule rather than to my current network via the built in airport. Thanks in advance for your help.

Can I join that network wirelessly so that I can have the TC in the rom with the computer (far from the router/wireles modem) and still use ethernet connection and USB for printer?
Yes, with two caveats: 1) It will really depend on the distance and what obstructions are between the other wireless router and the TC to determine how well the TC can connect to its wireless network, and 2) Configured to join, the TC's Ethernet ports will not be enabled. However, its USB port will.
These two items may preclude it being the desired end state that you are looking for. Typically to enable the TC to also provide network connectivity (either by wire or wireless), it would have to be configured for a WDS. Unfortunately, most non-Apple routers are not WDS-compatible.
This leaves you with at least two choices: 1) Connect the two routers by Ethernet or if that is not practical or desirable, consider Powerline adapters, or 2) Configure the TC as a standalone wireless router. With the second option, you would have to switch wireless networks to print or perform Time Machine backups ... again, not a viable solution.
I would suggest considering the Powerline adapter approach for your situation.

Help with ASP Connections - New User

I just set up a hosting account with 1 and 1 for a simple
website to catalog a series of yo-yo contest that we coordinate. I
have a simple MS Access database for organizing contest information
that we are trying to get online.
I am new to the application side of this and know very little
about connection strings, DSN, etc. I am experiencing problems with
connecting to the MS Access database that I have uploaded to the
1and 1 servers. If I hardcode the Javascript into the page, I can
connect and pull information but I definitely want to take
advantage of the design interface that Dreamweaver MX 2004 offers.
This is the code from the page that I can get working based
on the FAQ Sheet that 1and 1 offers for database connections:
<html>
<title>Database query using ASP</title>
<body bgcolor="FFFFFF">
<h2>Query table Products with
ASP</h2>
<%
Set dbaseConn = Server.CreateObject("ADODB.Connection")
dbaseConn.Open "DRIVER={Microsoft Access Driver
(*.mdb)};DBQ=" & Server.Mappath("\db\League.mdb") & ";"
SQLQuery = "SELECT * FROM Contest_Information"
Set RS = dbaseConn.Execute(SQLQuery)
%>
<%
Do While Not RS.EOF
%>
<%=RS("cStartDate")%>, <%=RS("cName")%>,
<%=RS("cWebsite")%> List

<%
RS.MoveNext
Loop
RS.Close
Set RS = Nothing
dbaseConn.Close
Set dbaseConn = Nothing
%>
</body>
</html>
If I put in a "Custom Connection String" using the previous
code:
"DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &
Server.Mappath("\db\League.mdb") & ";"
Dreamweaver can connect to the database when the connection
is 'tested' but cannot pull any tables and therefore cannot create
bindings.
Guidance...help...I'm stuck...
Thanks in advance.

Hello Lucky.da.boss,
And welcome to Apple Discussions!
is asking can I or is there anyway i can transfer my music off that iPod to my touch?
See this article for tips on how to copy music from your 5th generation iPod to your iTunes library. Once you have successfully done that, you can sync them over to your iPod Touch. There is no way to do it directly.
http://macs.about.com/od/backupsarchives/ss/ipodcopy.htm
Also, I have two applications that aren't downloading I want to know how to delete them.
Tap your finger on one of them and hold it there until you see all your Apps start to wiggle. You will also see a small x in the upper right hand corner of the Apps you can delete. Go ahead and tap this to delete the App. When you are finished, hit the Home button to make the Apps stop wiggling. It might also help to have a look at your iPod's *User Guide.
http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf
Can you have constant internet service or do they run solely off wi-fi?
Only Wi-fi.
B-rock

Help with creating a new window

Hi there
Could anyone help me with the coding to create a new window in java? Basically its when i click on a button a new window pops up
thanks

Icer_age828 wrote:
Could anyone help me with the coding to create a new window in java? Basically its when i click on a button a new window pops upWe need more information on what you mean here, what you know and what you don't know. Do you understand the basics of Java? Are you talking about using Swing? If so, what exactly do you mean by a "new window"? You can create a simple dialog via the method JOptionPane.showMessage(...) method. Do you mean to create and show a new JDialog? JFrame? Do you know about ActionListeners and how to add them to jbuttons? Given your post, I think that your best bet would be to start going through the Sun Java Swing tutorial from the beginning. Look here .

Help with starting the EM dbconsole please - emctl error.

Hi there - i've spent half my life trying to sort this and it's in vain. There's only 9 hits in google for the below error message and half of those are in Japanese. Not much help therefore. So any advice to be gratefully received!
I've installed enterprise manager with the option for Oracle to create a new repository. All seems to have installed ok. I've issued the set oracle_sid and the usual "emctl status dbconsole" command and i always get the "unable to locate web application configuration from ." error.
I can't see any oracle dbconsole service in the services window either. Should there be one or does this get created when you run a successful "emctl start dbconsole" command?
I've tinkered with the Oracle homes (as per previous discussions) but to no avail.
Appreciated if someone could point me in the right direction - I'm a newby to Enterprise Manager.
Thanks in advance. Jon

Nope. Still exactly the same.
Error as per previous server before i started hacking it (emctl status dbconsole): "Unable to locate web application configuration from ." I'm completely losing my mind with this install. This same error has happened on 3 different servers now. Always falls over on this agent configuration. Don't Oracle test their installation procedures? Anyway, here's a not so useful snippet of the logs. If anyone knows anything, would be good to let me know - otherwise change of career for me :-(
Cheers...
"Oc4jDeploy tool completed successfully!
INFO: Configuration assistant "OC4J Instance Configuration Assistant" succeeded
INFO: Command = D:\Oracle_Server\EM\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\Oracle_Server\EM\oms10g\bin\genpluginpath.pl D:\Oracle_Server\EM\oms10g D:\Oracle_Server\EM\oms10g
Operation successful.
INFO: Configuration assistant "Register DCM Plug-Ins With EM" succeeded
INFO: Command = D:\Oracle_Server\EM\oms10g\jdk\bin\javaw.exe -jar D:\Oracle_Server\EM\oms10g\dcm\lib\dcm.jar createInitialBackup -v -d -o D:\Oracle_Server\EM\oms10g -force
backup created: InstalledImage_EnterpriseManager0.btn-wks-strauss.rdfgroup.com
INFO: Configuration assistant "DCM Repository Backup Assistant" succeeded
INFO: Command = D:\Oracle_Server\EM\oms10g\perl\5.6.1\bin\MSWin32-x86\perl D:\Oracle_Server\EM\oms10g/install/oneoffs/applyOneoffs.pl automatic
INFO: Configuration assistant "EM Technology Stack Upgrade" succeeded
INFO: Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Unlocking Passwords and Out of Box setup is in progress.
Operation Configuring OMS is in progress.
OMS is being Secured and Lock is set to true.
Precompiling JSPs.
Performing installation of CLI services for client.
Operation Restarting OPMN Processes is in progress.
INFO: Configuration assistant "OMS Configuration" succeeded
INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
Performing free port detection on host=BTN-WKS-STRAUSS.RDFGROUP.COM
Securing the agent
Performing targets discovery and agent configuration
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception: 6
INFO: Configuration assistant "Agent Configuration Assistant" failed "

Help with Starting My Project [Project AM]

I apologize in advance if this is not in the correct forum.
//The next two paragraphs are a rundown of why I am doing this project and my previous experience with Java//
Here's where my story starts, I've just started out a new year of school and I've been placed in a Computer Science (Higher Level) class, and it so happens that I am to be coding/programming in Java. I've worked with C++ in the past, and I've noticed that Java is quite similar, thankfully.
This Computer Science class is a two-year course, at the end of the two years I will have an external assessment (IB dossier) due. This gives me tons of time to work on this project, if you haven't noticed by now it will be an on-going project.
I know this project is going to take some time that's why I would like to start now.
//End of Rundown//
My project is called "AM" and in the end it will be an "instant messenger" (with your help of course).
The first thing I would like to establish in this project is creating a server program to accept connections and a client to connect to the server (text based). I would like multiclient connections to the one server program.
Now here's the question, what should I look into before starting this project, what Java technologies? What resources should I grab from the library or from the book store? Basically I'm asking where I should begin?
If anyone has any suggestions or even some personal experience with writing a program like this please contact me. I would really appreciate it. Also source code would really help in learning this, but I can probably search that on my own, thanks.
Message was edited by:
am.aerebia

The easiest way to go about this is to use Sockets. You could also look into using RMI

Help with start routine

Hi,
I am new to ABAP.Can anyone help me wih this code
The following code is in start routine
LOOP AT DATA_PACKAGE.
SELECT /BIC/ZPACTGY /BIC/ZMPIINIR FROM /BIC/PZCONDTYP
 INTO IT_ZCONDTYP
 WHERE /BIC/ZCONDTYP = DATA_PACKAGE-/BIC/ZCONDTYP.
IF ( IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR12' OR
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR13' or
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR14' or
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVV10' or
 IT_ZCONDTYP-/BIC/ZMPIINIR Eq 'Y' or
 ( IT_ZCONDTYP-/Bic/zcondtyp ge 'Y100'
 and IT_ZCONDTYP-/Bic/zcondtyp le 'Y199' ) ).
 APPEND DATA_PACKAGE.
 ENDIF.
endselect.
ENDLOOP.
what I am trying to accomplish is I want my data which is in the internal table to satisfy the following conditions. and place it in internal table .(or whatever is correct)
IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR12' OR
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR13' or
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR14' or
 IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVV10' or
 IT_ZCONDTYP-/BIC/ZMPIINIR Eq 'Y' or
 ( IT_ZCONDTYP-/Bic/zcondtyp ge 'Y100'
 and IT_ZCONDTYP-/Bic/zcondtyp le 'Y199' ) ).
and read this from another transfer routine
CLEAR RESULT.
READ TABLE IT_ZCONDTYP WITH KEY
/BIC/ZCONDTYP = COMM_STRUCTURE-/BIC/ZCONDTYP
 BINARY SEARCH.
IF SY-SUBRC EQ 0.
RESULT = IT_ZCONDTYP-/BIC/ZCONDTYP.
ENDIF.
This is mostly related to BW.So if someone can give their opinion on how to achieve this I will be very grateful.
thanks,
Kal

hi Kal,
you have to specify what are you going to add to the datapackage internal table (before the append data_package statement).
hope this helps.
LOOP AT DATA_PACKAGE.
SELECT /BIC/ZPACTGY /BIC/ZMPIINIR FROM /BIC/PZCONDTYP
INTO IT_ZCONDTYP
WHERE /BIC/ZCONDTYP = DATA_PACKAGE-/BIC/ZCONDTYP.
IF ( IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR12' OR
IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR13' or
IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVR14' or
IT_ZCONDTYP-/BIC/ZPACTGY Eq 'VVV10' or
IT_ZCONDTYP-/BIC/ZMPIINIR Eq 'Y' or
( IT_ZCONDTYP-/Bic/zcondtyp ge 'Y100'
and IT_ZCONDTYP-/Bic/zcondtyp le 'Y199' ) ).
DATA_PACKAGE-... = ....
DATA_PACKAGE-... = ....
DATA_PACKAGE-... = ....
APPEND DATA_PACKAGE.
ENDIF.
endselect.
ENDLOOP.

Need help with my iTunes-new computer-can't access my music

We just got a new computer and I transferred all of my songs from the old to the new and now when I try to access them in iTunes I get an error message that "it cannot be used because the original file cannot be located" Do I have to put in the DVD with all of the files on it in order to use any of my song? I thought that I saved them to my hard drive, but who knows....HELP!!! pLEase!!!

You haven't told us enough about what you did.
You need to explain exactly how you did your transfer.
If you don't care about your ratings and play counts and your really did copy your files across, there is a simple way of getting going again.
With iTunes closed drag iTunes Library.itl and iTunes Music Library.itl out of the iTunes folder to the desk top.
Start iTunes and you will have an empty library. Now simply add the folder with your music files in it - normally iTunes Music - to iTunes with File>Add folder to library.
If you didn't copy your files across, try putting the DVD in the drive and opening iTunes - can iTunes find your files now. If so it is a sign you added the files to your library without copying them to your internal HD.

Help with router for new imac???!!!!!

I just bumped my cable internet speed up to the max I can get. I did a speed test with and without my router hooked up and my old Linksys router is really slowing it down. I have a Linksys Wireless-G router with speed booster.
My question is, Are there routers that are a lot faster??? And what one should I get to be compatible with my Imac. My Linksys one was a pain in the butt to hook up b/c Linksys does not have support for a Mac. Also, don't the setup discs they all come with only work on PCs????
Help please !!!
Thank you.

The current 802.1N specification is significantly faster than your G and has better robustness and range besides. Except for Apple's Airport basestations, all routers are configured via web-browser. In fact, just last week I set up a base for a colleague (don't remember offhand what brand) and all the so-called installation disk had on it was Adobe Acrobat and PDF files of the printed Quick Start Guide and manual that came in box.
It really isn't that big a deal setting up a new basestation but if you really want ease of operation, you can't beat Apple's Airport = and I'm looking forward to getting my hands on a TimeCapsule.

Help with starting a new website

Similar Messages

Maybe you are looking for