Help with Starting a Web Gallery

I am new to Lightroom and would like to setup a web gallery.  I setup the FTP server in the Upload Settings and when I click upload, everything seems to be working fine.  I also get a "Task Completed" message in the processing bar (upper left).
When I go to the destination,  (www.wokintime.com/gallery/) nothing is displayed.  Also, when I click "Preview in Browser" nothing displays - the url says "about:blank" and the entire page is blank.
Am I missing something?
Any help would be much appreciated.  Thank you!
[email protected]
http://www.wokintime.com

Do you get an error message from LR when uploading?
Have you got permission to upload to this folder on the server?
Are you placing the gallery in a sub folder within the gallery folder on your site? This will be shown here in LR
Have you checked your server to see if the galley files are present? Whoever supplies your web service will usually have a mechanism to do this. Log in to your service in your browser, it will be called file browser or the like.
I note you are using wordpress for the site, you may also have a htacess file on your site that is set to prevent browsing directly within a folder that is outside of the WP instillation, you will need to change permissions on the folder to allow viewing of the gallery by direct html link if this is the case. It may be better to create your galleries in wordpress itself, many plug ins are avaible for this, I do this on my sites such as
http://severnriverstrust.com/
petemarshall.com
both of which use WP for the site and files from LR to create galleries

Similar Messages

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • Help with autoplay w/out gallery.js

    Hello,
    I need some help with a project I'm trying to complete.  I am working on a simple interface for some photos of family.  I've attached my interface mockup, or you can view it quickly here: http://picasaweb.google.com/lh/photo/C_6LgYVWjxAEELKOk8lLsw?authkey=Gv1sRgCPSEsdbyuYuNRg&f eat=directlink
    The thumbnails load below and when clicked load the larger image in the window above.
    These are the js files im loading:
    <script src="/SpryData.js" type="text/javascript" language="javascript"></script>
    <script src="/SpryTabbedPanels.js" type="text/javascript" language="javascript"></script>
    <script type="text/javascript" src="/SpryAssets/SprySlidingPanels.js"></script>
    <script src="/SpryAssets/xpath.js" type="text/javascript"></script>
    <script src="/SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
    <script src="/SpryAssets/cp_unobtrusive.js" type="text/javascript"></script>
    <script src="/SpryAssets/SpryDOMUtils.js" type="text/javascript"></script>
    <script src="/SpryAssets/SpryEffects.js" type="text/javascript"></script>
    I want it so that the images will autoplay but as of now I do not have it set up so i can use gallery.js and don't want to try to implement it.  Is there another way to do this? I was thinking it might be more of a nicety not having to click on each thumbnail and rather have each one autoload one after the other.  If you think i HAVE to use gallery.js, any pointers or place where i can learn to implement it?
    Thanks!
    Rob

    wow. was i being so unclear that you completely misunderstood my question?
    1.  I already have a spry photo gallery working, its on a private server with password so i cant link to it.
    2.  I posted a picture of the interface.  It works perfect; thumbnails in bottom row that load big pic in a div above.
    3.  how do i make it so that the pictures auto advance at a timed rate without going back and implementing the gallery.js file and having to reorientate my code, or is it easier than i think?
    4.  Is there another MORE SIMPLE way of doing this i.e. a javascript image rotator
    Thanks in advance.

  • Help with using a web page from disk after saved from web

    Hi, I almost forgot the little I learned about web page development, so, I'm a total noob when it comes to this and I need your help.
    I saved as a complete web page on my hard disk this web page but when I open it in Firefox or IE, it doesn't display as much as I need it. I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away. I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.
    I will greatly appreciate your help with this.

    I'm sorry, but your post is very confusing
    I saved as a complete web page on my hard disk this web page
    Does this include site definitions?
    when I open it in Firefox or IE, it doesn't display as much as I need it.
    I dont know what this means...are there images that are not being displayed?  Is there styling that is not being rendered?
    . I'm mostly interested  in displaying the logo images as they appear on the original web page. The browsers just show them briefly when refreshing but hide them right away.
    Again, I dont know what this means?
    I can see the image files downloaded to my hard drive and if I open the page in Dreamweaver it displays these images  in the preview pane but I can't make them show in the browsers. From Dreamweaver I saved the page as in the folder where the images are and this also updated the code with the relative image links but the browsers still don't show them.I will greatly appreciate your help with this.
    Do you have a link to the page, and perhaps some explanation that is more clear as to what your issue is.
    Gary

  • Help with start up probs after force quit

    Hi there . I think I'm royally fckd. I was on blogger and my screen froze no cursor move nothing had to force quit. Now every time I try to turn on the MacBook Air all I get is a black screen and that start up noise over over over again . still black screen and no log in page . Is there a way to fix this or is it royally gone to mac heaven.help with thanks .

    your force quit wouldn't cause an inability to powerup.   Black screen on every powerup?
    SSD or logic board fault likely.
    Contact Apple for diagnostic/ repair.
    Anything in your Air can be fixed yes. 

  • Need Help with a Flash Web Project

    Hello, everyone. I am trying to use Flash to make a two-step
    system. I want the flash document to, first, allow a person to
    upload multiple image files and then, second, for the flash
    document be able to create a slideshow with the uploaded images and
    fade in and out from each image until the slideshow is over. I want
    it to be where the flash document creates its own slideshow with
    the images that are uploaded in the first step that I mentioned. I
    want it to do it completely on its own so I need to know how to
    give it the proper AI so that it can do this task.
    So, are there any tips that anyone has on how to do this? Can
    anyone tell me exactly how to do this? I really need help with this
    for my new website project. Thanks in advance, everyone!

    The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%.  Not within the movieclip, but the movieclip itself.  The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip.  To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
    To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation.  You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
    Let's say you name them upperText and lowerText.  Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
    _parent.upperText.play();
    _parent.lowerText.play();
    The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
    You'll probably want to add stops to the ends of the text animations as well.
    If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
    Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
    PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

  • Help with starting the EM dbconsole please - emctl error.

    Hi there - i've spent half my life trying to sort this and it's in vain. There's only 9 hits in google for the below error message and half of those are in Japanese. Not much help therefore. So any advice to be gratefully received!
    I've installed enterprise manager with the option for Oracle to create a new repository. All seems to have installed ok. I've issued the set oracle_sid and the usual "emctl status dbconsole" command and i always get the "unable to locate web application configuration from ." error.
    I can't see any oracle dbconsole service in the services window either. Should there be one or does this get created when you run a successful "emctl start dbconsole" command?
    I've tinkered with the Oracle homes (as per previous discussions) but to no avail.
    Appreciated if someone could point me in the right direction - I'm a newby to Enterprise Manager.
    Thanks in advance. Jon

    Nope. Still exactly the same.
    Error as per previous server before i started hacking it (emctl status dbconsole): "Unable to locate web application configuration from ." I'm completely losing my mind with this install. This same error has happened on 3 different servers now. Always falls over on this agent configuration. Don't Oracle test their installation procedures? Anyway, here's a not so useful snippet of the logs. If anyone knows anything, would be good to let me know - otherwise change of career for me :-(
    Cheers...
    "Oc4jDeploy tool completed successfully!
    INFO: Configuration assistant "OC4J Instance Configuration Assistant" succeeded
    INFO: Command = D:\Oracle_Server\EM\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\Oracle_Server\EM\oms10g\bin\genpluginpath.pl D:\Oracle_Server\EM\oms10g D:\Oracle_Server\EM\oms10g
    Operation successful.
    INFO: Configuration assistant "Register DCM Plug-Ins With EM" succeeded
    INFO: Command = D:\Oracle_Server\EM\oms10g\jdk\bin\javaw.exe -jar D:\Oracle_Server\EM\oms10g\dcm\lib\dcm.jar createInitialBackup -v -d -o D:\Oracle_Server\EM\oms10g -force
    backup created: InstalledImage_EnterpriseManager0.btn-wks-strauss.rdfgroup.com
    INFO: Configuration assistant "DCM Repository Backup Assistant" succeeded
    INFO: Command = D:\Oracle_Server\EM\oms10g\perl\5.6.1\bin\MSWin32-x86\perl D:\Oracle_Server\EM\oms10g/install/oneoffs/applyOneoffs.pl automatic
    INFO: Configuration assistant "EM Technology Stack Upgrade" succeeded
    INFO: Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
    Operation Stopping OPMN Processes is in progress.
    Operation EM Deploying is in progress.
    Operation Unlocking Passwords and Out of Box setup is in progress.
    Operation Configuring OMS is in progress.
    OMS is being Secured and Lock is set to true.
    Precompiling JSPs.
    Performing installation of CLI services for client.
    Operation Restarting OPMN Processes is in progress.
    INFO: Configuration assistant "OMS Configuration" succeeded
    INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
    Performing free port detection on host=BTN-WKS-STRAUSS.RDFGROUP.COM
    Securing the agent
    Performing targets discovery and agent configuration
    Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
    Exception : java.lang.Exception: 6
    INFO: Configuration assistant "Agent Configuration Assistant" failed "

  • Help with starting point for "proof of concept" integration

    We are a third party application provider and are attempting to figure out how to do a "proof of concept" integration with SAP.  We are not looking for "certification".  Our product does not appear to fit any of the standard certifications for integration and our experience integrating with other systems indicates that no two integration will be identical.
    We are looking to do a simple integration scenario with an SAP system so we have some basic experience doing it, can say 'Yes" when asked if we have done it, and can create a video showing a transaction being done in SAP and our system also updating (and ideally the reverse).
    Our starting point with respect to SAP knowledge is "0".
    Our basic task list (we think) goes something like
    1.  Figure out the version and modules of SAP with which we should be integrating
    2.  Get access to an SAP system (do we rent, is there a developer/evaluation, ...)
    3.  Put some data in the test system (is there a "sample data" set?)
    4.  Figure out the SAP transactions that map to the business process in which we are interested (moving goods in and out of a distribution center/ware house - are there some "standard business process guides")
    5.  Integrate (we are a .NET web based application so we are guessing this means use the ".Net Connector")
    Could anyone point out any resources (white papers, links, people, places to find people,...) that might be a good starting point?
    Thanks,
    John

    Athol,
    We are looking to recieve notifications out of SAP as tractor trailers at a dock are filled as proof on concept.  The actual integration scenarios we do are more complex and do not match well with any of the pre-packaged certification scenarios.  The real world integration scenarios actual vary substantially from customer to customer in terms of the integration points between systems.
    As we have become more marginally knowledgable about SAP, I think we will end up receiving and sending "IDOC" messages from SAP but have no idea what those IDOC messages are or where to start looking for what a "standard" (if there is one) message SAP would generate in reaction to whatever the "trailer is loaded" transaction is.
    To figure out what the transaction is, I assume we need to identify what version of SAP we should be targeting for a simple integration.  Are there any could references on what the commonly integration methods are and to which versions they apply?
    Something like "hey, if you do an integration with a IDOCs in with SAP Netweaver 2004 then that would good proof you could integrate with 90% of the installed SAP base".  Of course, any links explaining what the versions of SAP are and where they are in there lifecycle and what people are actually using would be helpful.
    John

  • New User needs help with starting SDK

    I downloaded the J2EEsdk-1_4 files and completed the installation. I have looked at all the tutorials and quick-start documentation, but cannot find how to begin building an application. All I needed was very minimal Java parts to write a "Hello World" program for a class, but it prompted me to get the whole package.
    How do I get to a prompt window to write some code, then compile it, then run it? I tested the local server as it suggested and it is working, and I ran their sample program and it worked.
    I just need a pointer to get me started. I don't need all the web deployemnt stuff, etc....
    Sorry for the silly questions but you gotta start somewhere.
    Thanks

    Brent In Iowa, you're on the Air.
    Thanks for taking my call, Larry.
    Umm, yes, I'd like to ask Mr. McNealy a question.
    Go ahead.
    umm, yes, Mr. McNealy. I like your language
    Thanks, Brent. We hope with developers like you, to make it the most widely used language in the world. It's people like you that will helps us squash that bastard Gates and make me...umm, I mean Sun Microsystems the richest company known to man-kind.
    Yeah but that's my problem Mr. McNealy. How do I write Hello World?
    First, Brent, ya gotta download the right SDK. Not the J2EE but the J2SE. Then ya gotta follow the links on the let for the tutorials.
    Thanks for your question. Our next caller, George is in Boise, Idaho. Hello, Boise.

  • Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

    Hi All,
         I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
    I have tried the following:
    reset IIS
    restarted the Timer Service
    When I try to use powershell command to stop I get the following error:
    Can anyone who went through this help PLEASE
    Stop-SPServiceInstance : An object of the type
    Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
    "job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named
    "SPTimerV4". Rename your object or delete the existing object.
    At line:1 char:127
    + ... pplication"} | Stop-SPServiceInstance
    + ~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
    SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
    ception
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
    iceInstance

    Hi,
    It seems that the issue is in the timer job definition for executing this operation.
    My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
    This might be helpful:
    http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job 
    I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
    As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm. 
    BR,
    Ivan

  • Help with buttons in photo gallery

    Hello all
    I am trying to find a more effeicent way to place buttons on each of my pages (Photo Gallery SIte). I have 150 pages and constantly have to link each button to the "next" or "last" button. Is there a more efficent way to for me to ad butons to each page.My site is Blazinginterest.com
    Please give me some feedback on my site, possibly add a picture viewer?
    Thank you, HD

    what code do you already have? Maybe we can help you modify
    it where it's not working.
    Also, how do you have it currently laid out? eg. do you have
    several images on the screen, but some method to scroll through
    other images? Have you done a search here or on director-online.com
    (in the forum or articles section) on similar questions? Do you
    have something written up to describe what features you need such
    as a design document?
    Just trying to get a sense of your level of programming in
    general, experience with Director and what planning/details you
    have worked out so far because there are so many different ways to
    program a gallery.

  • Problem with starting the Web Dynpro Application

    Hello,
    I have a problem with my web dynpro application, which is in our SAP Portal. We have three different systems (development, test, production). In production always the follewing error message occurs:
    The URL https://zsil2401.servers.wacker.corp:9004/sap/bc/webdynpro/sap/ZPLM_EN_FORM_300MM/ was not called due to an error.
    Note
    The following error text was processed in the system P1A : is not a valid attribute type.
    The error occurred on the application server zsil2401_P1A_04 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GETATTRIBUTE_RTTI of program CL_WDR_CONTEXT_NODE_INFO======CP
    Method: INIT_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_INFO======CP
    Method: CREATE_FROM_STRUCT of program CL_WDR_CONTEXT_NODE_INFO======CP
    Method: IFWDR_RG_CTRL_HANDLE~INIT_CONTEXT of program SAPLWDR_RG_GENERATED_SRC_API
    Method: IFWDR_INTERNAL_API~INIT_CONTEXT of program SAPLWDR_RG_PROXY_FACTORY
    Method: CONSTRUCTOR of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
    Method: IF_WDR_CLASSLOADER~GET_COMPONENT_CONTROLLER of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
    Method: CONSTRUCTOR of program CL_WDR_DELEGATING_COMPONENT===CP
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
    Some User get this message also in test an development. What could be the reason?
    Note: Nothing has changed in coding or context.....this error occurs without any changements
    Thanks for your help
    Best Regards
    Martin

    Hi,
      May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
    From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
    Aditya.

  • Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords.  More than one account downloaded from older Laptop.  Now the computer has the turning wheel in from of gray screen and won't go any further when

    I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se.  I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc.  Can't keep them straight even though I write everything down.  The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black.  When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that.  Then I held the on button in the back until the screen went black again. 
    What should I do?  Is there a way to combine all my accounts into one account with one Apple ID?  I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them. 
    In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
    Very confused.  Any Ideas about how I can get the computer to start up again and show a new screen?
    Thanks to anyone who has workable suggestions.

    If you really believe that your system has been compromised, here's what you do:
    Disconnect your Mac from your cable modem;
    Back up any documents on your system that are important to you;
    Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
    Choose a language and click the arrow button to continue;
    From the Utilities menu, choose Disk Utility;
    In Disk Utility, select your computer's hard drive;
    Click the "Erase" tab;
    Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
    Click the "Erase" button and allow it to process;
    Once the "erase process has completed (it will take a while), reinstall Mac OS X.
    Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
    Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
    Regards.

  • Help with creating a photo gallery?

    im trying to create a simple photo gallery. all i need to
    know is the lingo so that i can rollover a thumbnail of an image
    and it appears in place of a black box.... any help would be much
    appreciated.

    what code do you already have? Maybe we can help you modify
    it where it's not working.
    Also, how do you have it currently laid out? eg. do you have
    several images on the screen, but some method to scroll through
    other images? Have you done a search here or on director-online.com
    (in the forum or articles section) on similar questions? Do you
    have something written up to describe what features you need such
    as a design document?
    Just trying to get a sense of your level of programming in
    general, experience with Director and what planning/details you
    have worked out so far because there are so many different ways to
    program a gallery.

  • Can anyone help with start up? Or lack there of?

    Something is wrong when starting up my iMac5. I press the power button and it goes no where except to a blank light blue screen with a 1/2x1/2 inch square right in the middle of the screen where it flashes the finder icon and a question mark. The computer is unusable and won't go anywhere. Can anyone help me with this or is this something I have to get repaired?

    Hi moo209,
    Your iMac cannot find the startup disk. Your startup disk did not mount. Somehow, the formatted info cannot be read. Using your Install DVD, run Disk Utility and repair disk then repair disk permissions. It may be necessary to first mount the disk.
    If none of this will work, the disks header info is badly damaged. It will be necessary to format the disk to get it to mount. In this case, this will wipe all the data thats on the disk. You will have to reinstall the OS.
    If you had a second bootable HD or another Mac connected with Firewire, you could first run Data Rescue can extract the data to the other drive before formatting.
    Regards

Maybe you are looking for