Help with stop sign on screen - please!

My hard drive has packed up and I have a new one which I have formatted on another G5.
When I start up now I get a folder with a flashing question mark in it.
If I insert my copy of panther then the disk spins and the screen goes to the apple grey screen, but then comes up with a stop sign and I can't proceed any further.
I have tried holding down C when booting up and also alt which brings up a blue screen which shows the osx disc but then it just goes to the stop sign when I proceed.
Please help, why won't the operating system load on?
Because the old hard drive is broken, I only have internet at work.

Hi Kevin, and a warm welcome to the forums!
While you may get help or a solution here, It's quite acceptable to start a new topic of your own, certainly feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=596
Or the iMac G5 forum where I don't hang out, but many hood helpers there...
http://discussions.apple.com/post!default.jspa?forumID=134
The we are hanging here is a Kernel Panic, usually in your situation a wrong Install Disc, bad Disc, or bad Reader.
Do you have another Mac with Firewire around?

Similar Messages

In using Mail between my Yahoo emails i kep getting cut off telling me that my present password no longer works. This is more than annoying since i transfer files between various Yahoo accounts for my filing purposes. Help me stop this abuse. Please.

In using Mail and moving between my Yahoo emails i keep getting cut off telling me that my present password no longer works. But i have been getting my work done and suddelnly my password no loner is acceptalbe even upon re-entering it many times.This is more than annoying since i transfer files between various Yahoo accounts for my filing purposes. Help me stop this abuse. Please.

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

Help with Adobe.premiere.elements12. Please It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos wi

Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.

In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along.

Help with stopping KeyListerner

Hi there,
I need help with stopping KeyListener{}. Ive made this applet, which functions in a game. Once the player has achieved the goal, i have a results message appear. but if you hold UP arrow key, the message flashes and the image keeps moving, prolonging the message to appear. I've tried a if{} block, but it doesn't work.
iam using DirectionKeyListener implements KeyListener {} with keyPressed (KeyEvent event) {}. The if {}block (mentioned before) i put into the KeyEvent section so it, for example, x == 9, it would work, otherwise display the message.
Thanks in advance
Landon

yeah i include them but i dont ultilise them.
i use the keyPressed (KeyEvent event) {}
the code looks something like this:
public void keyPressed (KeyEvent event) {
if (current == 9){
//all the normal events
} else {
// display results
public void keyTyped (KeyEvent event) {}
public void keyReleased (KeyEvent event) {}
current is the varible that changes when the race is completed. It changes and then should trigger the new event. Iam also using paint(), if that might interfere.
again, thanks in advance

I have a grey screen when booting up my MacBook with stop sign, don't know what to do?

My MacBook Pro will not start up, it has a grey screen and a stop sign. I have looked at other advice and I don't have a snow leopard disk to put in. What shall I do? I have a lot of work on it which I think I have backed it up with iCloud but would like to get my mac functioning again.

You can buy Snow Leopard from Apple for $20.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
It's a long shot, but worth testing if the computer will boot in Target Disk Mode. Restart the computer and immediately hold down the T key. If the computer boots with a firewire icon on the screen it can be connected to another Mac in TDM.
http://support.apple.com/kb/ht1661
Post back if the fw icon shows up on the screen and you need more instructions. You will need another Mac to be the host for TDM.

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

Help with MM_editCmd.CreateParameter insert syntax please

In the past (I guess older ASP version maybe?), the
automatically generated code that DW created using the "insert
record" wizard allowed for easy editing and debugging within the
SQL. I just installed CS3 and created a similar page and the code
used to build the insert statement is quite different.
Unfortunately, I'm not versed well enough in it yet!
I can see how the SQL insert is being built:
Set MM_editCmd = Server.CreateObject ("ADODB.Command")
MM_editCmd.ActiveConnection = MM_wp_STRING
MM_editCmd.CommandText = "INSERT INTO test (FName, LName,
Company, Email, BPhone, BFax, MPhone, Props, regDate, Password,
MBroker, MBID, Status, ARID) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
MM_editCmd.Prepared = true
...and then it appears to uses some scripting functions to
build the values and replace the ?'s in the CommandText line:
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202, 1, 255,
Request.Form("FName")) ' adVarWChar
What I'm struggling with is the values inside each Append
line (202, 1, 255) and what the relate to AND more importantly, how
I can insert my own variable here instead of the form field data.
ex:
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202, 1, 255, StrMyStringValue)
' adVarWChar
I need help with the syntax. Would it be different if the
variable holds a number value vs. text (assuming the field it's
being inserted into hold numbers)
Also, i USED to be able to add a handly little Response.Write
before the execute insert line that would write the SQL insert
statement to the screen and stop so that I could SEE where the
issues were. I've tried:
Response.Write(MM_editCmd.Parameters)
Response.Write(MM_editCmd.CommandText)
Just can't get the SQL text to display. Is the SQL insert
statement not stored as a variable that i can call?
Thanks VERY much for any help!

You can use the concatenate() function to build up your string, as you no doubt know.
As far as the wildcard goes ... your intention must be to try to SET the call variable and later on test the call variable with an IF node. Is that right?
You would be able to test parts of the string using the substr() function - which is based on character position. If that is a fixed value that you know, it's easy. If it's not, you can first use the find() function to locate something (like the "_9"), returning the position, and then use the substr() function to pull it off.
Can you write some pseudo-code here to define exactly your intention? You can set up a dummy script and send a dummy call through using Call Tracer and watch the output to see how your code is working.
Regards,
Geoff

Help With Crash Code In PRE8 Please

In an interest to turn some of my recent discussions in a more positive direction and in keeping with the primary function of this forum (seeking advice and solutions) and in a further effort to not continually ***** about PRE8, can someone please help with and interpret the following crash codes recently generated by PRE8?
Thanks in advance for any help.
Glenn
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangXProcB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                ba8e
Hang Type:                                        32
Waiting on Application Name:       ElementsOrganizerSyncAgent.exe
Waiting on Application Version:    8.0.0.0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 2:         84f3
Additional Hang Signature 3:         f0a90877ec38c16fd285cc410c83433d
Additional Hang Signature 4:         ba8e
Additional Hang Signature 5:         cb0b340a390054264815ceb8e3574d53
Additional Hang Signature 6:         84f3
Additional Hang Signature 7:         f0a90877ec38c16fd285cc410c83433d
Extra information about the problem
Bucket ID:                                          749899167
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                af71
Hang Type:                                        0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 2:         d900
Additional Hang Signature 3:         431be4795d1c061aba02734aa57c4950
Additional Hang Signature 4:         af71
Additional Hang Signature 5:         37a5e7ba79ac8a533571e7d8f2e8acd0
Additional Hang Signature 6:         d900
Additional Hang Signature 7:         431be4795d1c061aba02734aa57c4950
Extra information about the problem
Bucket ID:                                          811067413
Description
A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:                      AppHangB1
Application Name:                           Adobe Premiere Elements.exe
Application Version:                         8.0.0.0
Application Timestamp:                   4aa5c87c
Hang Signature:                                7008
Hang Type:                                        0
OS Version:                                        6.0.6001.2.1.0.256.1
Locale ID:                                           1033
Additional Hang Signature 1:         f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 2:         0fb3
Additional Hang Signature 3:         a5f1d311bc7bfa26f067b42cbdeac6af
Additional Hang Signature 4:         7008
Additional Hang Signature 5:         f0af3d01fb74f43241231d4e61778ffa
Additional Hang Signature 6:         0fb3
Additional Hang Signature 7:         a5f1d311bc7bfa26f067b42cbdeac6af
Extra information about the problem
Bucket ID:                                          781893170

Here are my system specs. Let me know if you need anything else.
Thanks
Glenn
Operating System
MS Windows Vista Ultimate SP2
           Installation Date: 06 March 2009, 02:58
           Intel Mobile Core 2 Duo T9550
               Cores                       2
               Threads                     2
               Name                        Intel Mobile Core 2 Duo T9550
               Code Name                   Penryn
               Package                     Socket P (478)
               Technology                  45nm
               Specification               Intel Core2 Duo CPU T9550 @ 2.66GHz
               Family                      6
               Extended family             6
               Model                       7
               Extended model              17
               Stepping                    A
               Revision                    E0
               Instructions                MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
               Bus speed                   266.0 MHz
               Rated Bus speed             1064.0 MHz
               Stock core speed            2666 MHz
               Stock bus speed             266 MHz
               Average Temperature         36 °C
               Cache
                   L1 data cache size              2 x 32 KBytes
                   L1 instructions cache size      2 x 32 KBytes
                   L2 unified cache size           6144 KBytes
               Core 1
                   Core speed            1596.0 MHz
                   Multiplier            x 6.0
                   Bus speed             266.0 MHz
                   Rated Bus speed       1064.0 MHz
                   Temperature          37 °C
                   Thread 1
                       APIC ID     0
               Core 2
                   Core speed            2660.0 MHz
                   Multiplier            x 6.0
                   Bus speed             266.0 MHz
                   Rated Bus speed       1064.0 MHz
                   Temperature           36 °C
                   Thread 1
                       APIC ID     1
      Memory
               Type                                DDR2
               Size                                4096 MBytes
               Channels #                          Dual
               DRAM frequency                      399.0 MHz
               CAS# Latency (CL)                   6.0 clocks
              RAS# to CAS# delay (tRCD)           6 clocks
               RAS# precharge (tRP)                6 clocks
               Cycle time (tRAS)                   18 clocks
           SPD
               Number of SPD modules          2
               Slot #1
                   Type                DDR2
                   Size                2048 MBytes
                   Manufacturer        Hyundai Electronics
                   Max bandwidth       PC2-6400 (400 MHz)
                   Part number         HYMP125S64CP8-S6
                   Serial number       00007112
                   Week/year           52 / 08
                   SPD Ext.            EPP
                   JEDEC #3
                       Frequency             400.000000 MHz
                       CAS# latency          6.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  18
                       tRC                   24
                       Voltage              1.8 V
                   JEDEC #2
                       Frequency             333.333344 MHz
                       CAS# latency          5.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  16
                       tRC                   21
                       Voltage               1.8 V
                   JEDEC #1
                       Frequency             266.666656 MHz
                       CAS# latency          4.0
                       RAS# to CAS#          4
                       RAS# Precharge        4
                       tRAS                  12
                       tRC                   16
                       Voltage               1.8 V
               Slot #2
                   Type                DDR2
                   Size                2048 MBytes
                   Manufacturer        Hyundai Electronics
                   Max bandwidth       PC2-6400 (400 MHz)
                   Part number         HYMP125S64CP8-S6
                   Serial number       02008065
                   Week/year           52 / 08
                   SPD Ext.            EPP
                   JEDEC #3
                       Frequency             400.000000 MHz
                       CAS# latency          6.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  18
                      tRC                   24
                       Voltage               1.8 V
                   JEDEC #2
                       Frequency             333.333344 MHz
                       CAS# latency          5.0
                       RAS# to CAS#          6
                       RAS# Precharge        6
                       tRAS                  16
                       tRC                   21
                       Voltage               1.8 V
                   JEDEC #1
                       Frequency             266.666656 MHz
                       CAS# latency          4.0
                       RAS# to CAS#          4
                       RAS# Precharge        4
                       tRAS                  12
                       tRC                   16
                       Voltage               1.8 V
Mother Board
Manufacturer   Dell, Inc.
           Model                      0P786H
           Version                    A04
           Chipset vendor             Intel
         Chipset model              PM45
           Chipset revision           07
           Southbridge vendor         Intel
           Southbridge model          82801IM (ICH9-M)
           Southbridge revision       03
           BIOS
               Brand       Dell Inc.
               Version     A04
               Date        11/26/2008
           Monitor
               Name                    Generic PnP Monitor on ATI Mobility Radeon HD 3650
               State                   enable
               State                   primary
               Monitor Width           1920
               Monitor Height          1200
               Monitor Bit             32
               Monitor Frequency       60
               Device:                 \\.\DISPLAY1\Monitor0
               Name                    Default Monitor on ATI Mobility Radeon HD 3650
               State                   disabled
               State                   removable
               Monitor Width           800
               Monitor Height          600
               Monitor Bit             32
               Monitor Frequency      60
               Device:                 \\.\DISPLAY2
           ATI Mobility Radeon HD 3650
               GPU                         M86
               Device ID                   1002-9591
               Subvendor                   Dell (1028)

Help with FaceTime sign in

I recently am having trouble signing on to FaceTime. I keep getting the message "Could not sign in. Please check your network connection and try again." I haven't had this problem before. I have a MacBook laptop, OS X 10.9. I am able to use FaceTime on my iPhone with no problems.

I have had this problem for some time now and have just fixed it. I cannot say that it will work for all of you, but I suggest you do the following first. Check you have no serial number showing in your firmware checking in the, System > About your Mac > More Info … you’ll get a window stating your Serial Number is None or (in my case) System Serial#: If you cannot see your serial number then it probably means that it is not on the logic board. There have been numerous posts about logic boards being replaced and Apple service centres forgetting to enter the serial number. I myself had to have the logic board replaced three months after I purchased my MacBook Pro. I then found this post, http://rogersm.net/icloud-problems-mountain-lion-serial-number It explains everything in detail and I am very grateful to the poster for finally solving the problem. I would suggest that you follow the instructions in detail, although I did change the startup suggestion - I shut down and restarted whilst holding the option key down. Once the computer had started - the screen showed my hard drive - I inserted the bootable cd I had made. I then double clicked on it and followed the instructions on screen. The software seems to be from Apple themselves as you have to agree to their terms. Once completed and I restarted, both iMessage and FaceTime are working perfectly and my serial number appears in 'About Your Mac > More Info'. Prior to using this software, I did search extensively to see if it would be okay - most posts said they had success. Just to let you know, you will need to find your original serial number to be able to do this. I had kept the box so it was easy for me to find it. It should also be on your purchase receipt. My MacBook is from late 2011. I cannot guarantee that this will work for everybody, so please decide for yourself before going down this route, as I did.

Help with Refreshing and Calling Screens

Hi everyone. I have somewhat of a simple ABAP program in which the user will enter data on Selection-Screen 1000. This will then be loaded into an Object Oriented ALV Grid for display purposes only (screen 0100). At any time, the user may use the back button on the ALV Grid Screen; which will take them from screen 0100 to screen 1000(Selection Screen). Lets assume the user does not want to go back to the original selection screen from the ALV Grid Screen; they entered the information correctly and want to continue processing using a custom button I've created which will continue to process the record of data into a BW ODS. This process works, but now I would like to use the write statement once the custom button is clicked to show a summary of the data I am inserting into the ODS after the data has been inserted. The problem is, the title of the ALV Grid still shows and the Write statement is processed, but not shown on the screen. I've been trying to refresh the screen with set screen and call screen combinations, but no luck. Any Help would be appreciated. Thanks!
Here is a sample of the code below:
*& Report ZINC_DSP_SALES_INCRASE
REPORT ZINC_DSP_SALES_INCREASE MESSAGE-ID zsm.
INCLUDE <icon>.
DATA: credit_itab type standard table of /bic/azincosvi00,
 wa_credit like line of credit_itab,
 alv_itab type standard table of /bic/azincosvi00,
 wa_alv like line of alv_itab.
DATA: ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm,
 incent type table of /bic/azincosvi00,
 g_container TYPE scrfname VALUE 'Increase DSP Sales',
 grid1 TYPE REF TO cl_gui_alv_grid,
 gs_layout TYPE lvc_s_layo,
 g_custom_container TYPE REF TO cl_gui_docking_container.
DATA: active_guid like /bic/mzguid_dsr,
 UNIQUEKEY LIKE /BIC/AZINCOSVI00-/BIC/ZRCRDKEY,
 rpt_per_rec like /BIC/MZRPTPRDCR,
 dsrcode like /bic/mzdsrcode-/bic/zdsrcode,
 payrec like /bic/mzsubcode.
CLASS lcl_event_receiver DEFINITION DEFERRED.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
 handle_toolbar
 FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING e_object e_interactive,
 handle_user_command
 FOR EVENT user_command OF cl_gui_alv_grid
 IMPORTING e_ucomm.
 PRIVATE SECTION.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
This will create the toolbar
METHOD handle_toolbar.
 DATA: ls_toolbar TYPE stb_button.
 CLEAR ls_toolbar.
 MOVE 3 TO ls_toolbar-butn_type.
 APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to show booking table
 CLEAR ls_toolbar.
 MOVE 'CREATE' TO ls_toolbar-function.
 MOVE ICON_OKAY TO ls_toolbar-icon.
 MOVE ' ' TO ls_toolbar-disabled.
 APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
ENDCLASS.
Data: event_receiver TYPE REF TO lcl_event_receiver.
START-OF-SELECTION.
Selection-Screen BEGIN OF BLOCK 1 with frame title text-001.
Parameters: start like /bic/azincosvi00-BILL_DATE.
Selection-Screen END OF BLOCK 1.
Selection-Screen BEGIN OF BLOCK 3 with frame title text-003.
Parameters: guid type /BIC/OIZGUID_DSR,
 pcode type /BIC/OIZPGMCODE,
 scode type /BIC/OIZSUBCODE,
 reason type /BIC/OIZEXCPTC,
 quantity(5) type n,
 discount type /BI0/OISUBTOTAL_4.
Selection-Screen END OF BLOCK 3.
END-OF-SELECTION.
IF quantity <> '00000'.
 if pcode <> 'SCTMS'.
 message e000 with 'Quantity can only be used with seating spiff'.
 endif.
ENDIF.
GET REPORT PERIOD INFO using today's date.
select single * from /bic/mzrptprdcr INTO rpt_per_rec
 where calyear = sy-datum(4)
 and /bic/zpgmcode = pcode
 and ( /BIC/ZRPPRDSTR <= start
 and /BIC/ZRPPRDEND >= start ) .
if sy-subrc <> 0.
 message e000 with
 'Report Period NOT FOUND for' pcode ' ' sy-datum(4).
endif.
Select Active Guid based upon user entry on selection-screen
Select single * from /bic/mzguid_dsr into active_guid
 where /bic/zguid_dsr = guid
 and /bic/zdsrstat = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'Please enter a valid GUID'.
 ENDIF.
Select DSR Code based upon a valid guid entered
Select single /bic/zdsrcode from /bic/mzdsrcode into dsrcode
 where /BIC/ZGUID_DSR = guid
 and /BIC/ZDSRCDST = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'GUID entered does not have an active dsr code.'.
 ENDIF.
Select MAX( /BIC/ZRCRDKEY ) FROM /BIC/AZINCOSVI00 INTO WA_CREDIT-/BIC/ZRCRDKEY.
UNIQUEKEY = WA_CREDIT-/BIC/ZRCRDKEY + 1.
WA_CREDIT-/BIC/ZRCRDKEY = UNIQUEKEY.
WA_CREDIT-PO_NUMBER = UNIQUEKEY.
WA_CREDIT-/BIC/ZERDAT = SY-DATUM.
WA_CREDIT-BILL_DATE = SY-DATUM.
WA_CREDIT-/BIC/ZRPPRDSTR = rpt_per_rec-/BIC/ZRPPRDSTR.
WA_CREDIT-/BIC/ZRPPRDEND = rpt_per_rec-/BIC/ZRPPRDEND.
WA_CREDIT-/BIC/ZCUBPRCDT = SY-DATUM.
WA_CREDIT-/BIC/ZRPTPRDCR = rpt_per_rec-/BIC/ZRPTPRDCR.
WA_CREDIT-/BIC/ZINCPYPRC = '00000000'.
WA_CREDIT-/BIC/ZGUID_DSR = ACTIVE_GUID-/bic/zguid_dsr.
WA_CREDIT-/BIC/ZDSRCODE = dsrcode.
WA_CREDIT-/BIC/ZPGMCODE = PCODE.
WA_CREDIT-/BIC/ZUNASSIGN = 'N'.
WA_CREDIT-/BIC/ZSUBCODE = SCODE.
WA_CREDIT-/BIC/ZSITE_ICR = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSUSPEND = 'N'.
WA_CREDIT-/BIC/ZSUSPNDR = ' '.
WA_CREDIT-/BIC/ZSITE_IRG = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSITE_CST = ' '.
WA_CREDIT-/BIC/ZINCBONUS = '0.00'.
WA_CREDIT-STAT_CURR = 'USD'.
WA_CREDIT-DOC_CURRCY = 'USD'.
WA_CREDIT-SALES_UNIT = 'ST'.
WA_CREDIT-CALYEAR = SY-DATUM(4).
WA_CREDIT-/bic/ZCASEID = SY-UNAME.
WA_CREDIT-/bic/ZSLSRSN = REASON.
WA_CREDIT-RECORDMODE = ' '.
*Depending on Program Code, populate the amounts to be paid.
Data: fivepercent type p.
 fivepercent = '0.05'.
If pcode = 'SCW5S' or pcode = 'SCTMS'.
Select single * from /bic/mzsubcode into payrec
 where /bic/zpgmcode = pcode
 and /bic/zsubcode = scode
 and CALYEAR = sy-datum(4).
 if sy-subrc <> 0.
 write: / '************** ERROR ***********************',
 / '** Missing Program Information for ',
 / pcode,
 scode,
 sy-datum(4),
 exit.
 endif.
ENDIF.
If pcode = 'SCW5S'.
WA_CREDIT-/BIC/ZINCUSDDS = discount.
WA_CREDIT-/BIC/ZPAYAMTUS = WA_CREDIT-/BIC/ZINCUSDDS * payrec-/bic/zpayper / 100.
WA_CREDIT-SUBTOTAL_4 = discount.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
If pcode = 'SCTMS'.
WA_CREDIT-/BIC/ZPAYAMTUS = quantity * payrec-/bic/zpayper / 100.
WA_CREDIT-/BIC/ZINCUSDDS = '0.00'.
WA_CREDIT-SUBTOTAL_4 = '0.00'.
WA_CREDIT-/BIC/ZINC_QTY = quantity.
Endif.
If pcode = 'SCTB'.
WA_CREDIT-/BIC/ZPAYAMTUS = '0.00'.
WA_CREDIT-/BIC/ZINCUSDDS = DISCOUNT.
WA_CREDIT-SUBTOTAL_4 = DISCOUNT.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
*& Module PBO OUTPUT
 text
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = '/bic/azincosvi00'
 CHANGING
 it_outtab = alv_itab.
 CREATE OBJECT event_receiver.
 SET HANDLER event_receiver->handle_user_command FOR grid1.
 SET HANDLER event_receiver->handle_toolbar FOR grid1.
 CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
 text
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Module 200_PBO OUTPUT
 text
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT

There are some problems with ok_code, you need to assign sy-ucomm at each module. Also the main problem was that you needed leave to list-processing and suppress dialog before writing. However, when you do this the screens calls change a little. You also needed to use the container correctly. Apply the correctons below and you'll be all set. Unfortunaley you will have to play around with calling the sel. screen (1000) from screen 100, I don't think call sel. screen 1000 will work properly there (you might need a custome screen instead). The user may be okay with kicking back out to sa38 after the alv display, however. Good luck and don't listen to the clowns' comments above. I once worked in that circus, Hey Guys.
Instead of this:
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
DO THIS:
METHOD handle_user_command.
 CASE e_ucomm.
 WHEN 'CREATE'.
 Insert /bic/azincosvi00 from wa_credit.
 CALL SCREEN 200.
 WHEN 'OTHERS'.
 " DO NOTHING
 ENDCASE.
ENDMETHOD. "handle_user_command
Instead of this:
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
DO THIS:
IF g_custom_container IS INITIAL.
 CREATE OBJECT g_custom_container EXPORTING dynnr = '100'
 repid = sy-cprog
 ratio = '95'.
ENDIF.
IF grid1 IS INITIAL.
 CREATE OBJECT grid1 EXPORTING i_parent = g_custom_container.
ENDIF.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET SCREEN 100.
CALL SCREEN 100.
Instead of this:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = '/bic/azincosvi00'
CHANGING
it_outtab = alv_itab.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
DO THIS:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
 i_structure_name = '/bic/azincosvi00'
CHANGING
 it_outtab = alv_itab.
CALL METHOD grid1->set_toolbar_interactive.
ENDMODULE. " PBO OUTPUT
Instead of this:
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'BACK'.
CALL METHOD grid1->free.
CALL SELECTION-SCREEN '1000'.
WHEN OTHERS.
" DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
DO THIS:
MODULE alv_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 LEAVE PROGRAM.
* CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
Instead of this:
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
DO THIS:
*Take care of all your list output here
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'MAIN200'.
SET TITLEBAR 'MAIN200'.
SUPPRESS DIALOG.
WRITE AT 5: 'Increase DSP Sales'.
SKIP 1.
WRITE AT 5: 'USER'.
WRITE AT 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
Add Moule:
MODULE 200_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL SCREEN 100.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " 200_PAI INPUT

Help with Gateway TG799 Firewall settings Please

We have a Telstra Gateway Max TG799vac.
We have recently acquired our own domain name and have setup up an online store on Shopify.
So the underlying web address (on myshopify.com) is not the same as our URL of the shop.When we try to access the new site from any computer or device from within our house
we are blocked 90% of the time. It occasionally will connect. We are therefore unable to do admin on our own site.
I have tried USB tethering thru my phone's data and works 100% no worries. This bypasses the gateway and Telstra of course.
Anyone outside our home can always connect no worries.I have suspected the Firewall in the gateway TG799 device.
So I went into settings and changed the firewall setting down to the LOW setting.
Then we can connect all the time.
When in NORMAL or HIGH then we get this intermittent (mostly failed) connection.
After this experiment I am convinced it has something to do with the internal firewall.There is also a USER DEFINED section where you can set your own firewall rules
but I don't know enuff about what to do in there to experiment.
But I think I could set up a rule in there to allow this site to work for us if I knew how to go about it.I have been unable to find anyone within the normal Telstra tech help line who can help with this.Does anyone on here have any such knowledge or can give me a pointer where I can read/learn about how to do this for myself.Any help will be greatly appreciated.

Thanks Steph,The fact that these devices are updated by Telstra remotely without our prior knowledge explains alot.It explains why the problem I first reported just started to happen out of the blue.It also explains why it just as mysteriously disappeared. It also explains why we suddenly had trouble with our phones dropping the wifi connection constantly.And why that suddenly fixed itself as well. It also explains why we suddenly got a monstrous over-use on our data bill on our Telstra mobile.We thought we were safe in our own house to use data on this phone knowing it was connected to our wifi and therfore our BigPond plan. What we did not know was that the phone was loosing sync with the wifi and therefore dropping back to 3G plan data use without our knowledge. My wife had been using her phone to connect to a Chinese movie streaming site and of course when the wifi dropped out she did not know she was streaming thru her 3G plan. Massive unexplained data over-use resulted. I had a rough time convincing your billing organisation that we were using wifi (or thought we were anyway) for the movies and they would not believe us therefore the monster bills were upheld. We did not reaslise until far too late that the phone was loosing the wifi connection without us knowing. We have stopped using that service now and as soon as the credit we accumulated with the associated billing stuff-ups is used up we will be leaving Telstra for another less troublesome provider. How about giving us poor defenseless users some notice that our devices have been updated and a summary of what aspects have been changed. Just like happens with apps on the Google Play store. I will now be approaching your billing organisation once more armed with this knowledge. My argument will be that our over-use on 3G data stemmed from a bad firmware update without our knowledge in your modem causing us to over-use 3G data we were not aware of. This time if they don't listen then it will be time for a complaint to the TIO. And perhaps even a media story. Disgusting service! And one angry Telstra customer.

Help with Photoshop Print Settings? Please-I need this Before Tommorow!

Omfg, this is driving me up the wall. Does anybody have a solution as to why every single time I try to edit the photoshop page setup settings and click OK, it resets everything I adjusted and replaces it with the defaults.
Somebody, please help me!

Are you looking at the settings for different documents? The print settings are stored with the document now.
So, for example, if you open Document A and change its print settings, they should stay set for Document A.
But, if you then open Document B, you'll see the print settings that were originally saved with Document B.
-Noel

Help with icon on n85 screen

Hi all.
Looking for help with an icon that appears at near the top left corner of my n85 screen (I'm new to S60's). It appears when I'm either in a call using the keypad to dial a number. Sometimes it's a small arrow/triangle in an orange/red background and other times it's a green background.
Does this have anything to do with call diverts?? Tried googling and the forums but can't find anything.
Thanks everyone.
J.

kali,
that will come up to show you when you have something Java running. To close out of that once it is open, is to close out of all of your browser (IE for example) windows to reset the Java runtime environment.
MT

Idiot needs help with hanging mac book pro please

can anyone please help me
i have a 13 inch 2013 macbook pro but since yesterday every 30/40 seconds if im trying the spinner circle thing comes up and even now I'm trping faster than my mac can keep up
iv installed nothing recently
im really stuck where to go from here
really sorry if I'm vague but I'm not a computer genius
if all fails then i have to take it back to apple
thanks for any help

EtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 17:53:58 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:36:51
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (635.73 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8 disk2 : (329.8 MB)
disk2s1 (disk2s1) <not mounted> : 287 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Untitled Disc (disk2s1s2) /Volumes/Untitled Disc : 286 MB (0 B free)
USB Information: ℹ️
Western Digital External HDD 160.04 GB
WD USB 2 (disk3s1) /Volumes/WD USB 2 : 160.04 GB (64.46 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.tunabellysoftware.TGFanHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video> [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
 19% Finder
 2% WindowServer
 0% AppleSpell
 0% DesktopServicesHelper
 0% mds_stores
Top Processes by Memory: ℹ️
429 MB iPhoto
198 MB Finder
180 MB iTunes
144 MB com.apple.WebKit.WebContent
112 MB mds_stores
Virtual Memory Information: ℹ️
1.97 GB Free RAM
4.26 GB Active RAM
1.32 GB Inactive RAM
1.03 GB Wired RAM
3.49 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 03:18:42 PM Self test - passed
Jan 1, 2015, 02:04:03 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-01-140403_[ redacted].cpu_resource.diag [Details]

Need some help with security sandbox stuff asap please

hey guys... so im trying to do a swfLoader call to a swf on a server from my actionscript on my local machine, when i do that i get the security sandbox violation error.... i tried adding a crossdomain.xml file to the server that has the following code in it
<cross-domain-policy>
 <site-control permitted-cross-domain-policies="master-only"/>
 <allow-access-from domain="*"/>
 <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
</cross-domain-policy>
and in my actionscript on application initialize i do
initialize="init(); Security.loadPolicyFile('http://myServer.com/crossdomain.xml')"
i also do
Security.allowDomain("http://myServer.com");
any ideas???? oh and i also went to this website http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml and set the always allow trust locations to "/"
any ideas on how i could possible fix this problem?? ive been trying to get around this problem for the last 2 days!!
please help!!!!

Hi,
Please use policy file logging to check the exact error. This should shed some light on the problem.The procedure is detailed here.
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_05.html
Nishad

Help with stop sign on screen - please!

Similar Messages

Maybe you are looking for