Help with Subaccounts Where Email is Linked to Yahoo

I have been a Verizon customer for several years, and have always had my Verizon email linked to Yahoo. At one point, I created a subaccount for my spouse, which she uses as her primary, personal email address. I attempted today to create an additional subaccount for my son to use and was surprised to get a message saying that accounts linked to Yahoo do not permit creation of subaccounts.
Why was this permitted previously but not now? Is the only solution to unlink from Yahoo? What are the implications for my spouse's subaccount if we unlink from Yahoo now?
Thank you,
R

You can still create subaccounts even though you are linked with Yahoo. I just used my personal account and verified its still working. I am not sure if it was a temporary problem with your account, but if you are still having trouble please send me a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Help with deleting junk email

Can anyone please help with a problem I'm having with icloud email. I have a number (not all) of messages in junk mail and no matter what I do I can't seem to delete them. I delete them, they are gone, but when I come back they are back again but any other messages I might have deleted at the same time are deleted.

Open System Preferences > iCloud
Deselect the box next to Mail then reselect it.
Give iCloud a few minutes to re sync your Mail.

C3 touch and type HELP with mms and email

I have a C3-01 touch and type my provider is AT & T I need any help to get my email settings and internet settings AT & T have been NO help since i did NOT buy my phone threw them!!! At first I had trouble with receiving pic messages and send pic messaging so i sent a question threw nokia and someone had the settings i followed the steps and now i can receive and send pic messages and AT & Twas trying to tell me I wouldn't be able to since i didn't buy my phone threw them they were of NO help so now i am asking anyone that can help again i need the steps to set my phone so i can get my email and internet any one with info let me know THANK YOU!!! Iove this phone i just can't get any support from AT & T

herzlos:
What firmwire do you currently have?
Turn off your phone and then turn on your phone. Usually resetting the phone temporarily fixes the problem
My Nokia C3-01 Software details:
V 05.60
06-10-10
RM-640
(c) Nokia
Found this by: Menu>Settings>Phone>Phone updates>Curr. sw details

Help with SUBMIT BY EMAIL, radio buttons

Hi guys:
I have a two parter. I sincerely appreciate any advice!
1. Using Adobe Acrobat/Adobe LiveCycle Designer (mostly LiveCycle) I want to somehow pull a user-entered value from the PDF into the subject line of the email, created when the user clicks on "SUBMIT BY EMAIL".
Specifically, when the end-user fills in the "Employee ID" line in the PDF form, and submits the form, I'd like the subject line of the Submit by Email -email to read "Employee #___" with the ___ obviously being the employee ID.
Any help would be great; thanks!
2. I am aware of how to prevent a PDF being submitted via email if the enduser hasn't filled out a certain part of it -- a message pops up saying that the user hasn't filled in a required line, and the line is highlighted with a red box, etc.
What I can't figure out is as follows: I have two radio buttons, one (and only one) of which MUST be slected by the user. How do I set it up so that either one or the other must be selected in order to submit? Currently the form will only submit if you have both selected.
Thanks!

David,
I can help with the first part I think. I just tried this out using Designer and Acrobat 8, and it worked. (I saved my form as a dynamic acrobat 8 pdf)
I got this script from searching the forum and then tweaked it a tiny bit so that it works for the subject line. (http://www.adobeforums.com/cgi-bin/webx?addBookmark@@.3bc34abf/44)
Using a regular button for submitting, I added this javascript as a click event:
var Comment = EmployeeID.rawValue;
if (EmployeeID.rawValue == null){ Comment = " "} else {Comment = EmployeeID.rawValue};
event.target.submitForm({cURL:"mailto:[email protected]?subject=Employee#"+Comment+"&bo dy=Write whatever you want to go here.",cSubmitAs:"XML",cCharset:"utf-8"});
So, my variable "Comment" will return the number typed into the EmployeeID field and put it in the subject line after "Employee #". If you copy/paste the code, make sure you change the email address and body message to be what you want.
Kristi
(oh, and if you want it to come back as pdf, change the cSubmitAs:"XML" to "PDF" and then enable user rights in Acrobat 8.)

Help with iCloud/syncing emails

Hi
I may be missing something really obvious here as I like to think I'm pretty good with technology and have been Mac based for the last 8 odd years so I'm used to the Apple setup etc. However, I'm having some difficulties getting things syncing across devices and wondered if anyone knew how to resolve this.
I have several different email addresses I use, my personal one and my work one, plus the standard icloud one you get when you create an icloud account. My personal email address is from my own domain name so is set up as an 'other' type of email account, my work email is Exchange Server type.
Across my iPhone, iPad, Mac and iCloud on the web the Exchange email address syncs perfectly. I can send/receive email from this account and if I delete a message/read a message/move a message to another folder etc it syncs automatically across all devices. With my own personal email, although I can read/delete/send emails from any device, they don't sync, in that I may read all my emails on my iPhone and then have to go through them again on my Mac and my iPad separately.
Also, when I log into iCloud on the web, the only emails visable are from my iCloud email address and this is all I can send emails from as well.
My personal email address is the one my Apple ID is set with.
Is anyone able to shed any light on this for me please as its extremely frustrating to have to keep going through my emails 3 times each day, and even more frustrating that my work email which is Microsoft based works better than my Apple Mail account!!
Many thanks
Jo

Thanks for that nunomonterio, I shall get this set up now to try it out.
In the meantime though can I just check a couple of things....
That means I can only redirect one domain I assume, so it uses relevant smtp server (I have a couple of different domains).
Also, surely that mean that when I respond to my emails forwarded from my own domain to the icloud account they will be sent with my icloud email address or can I set them to display the from address of the relevant domain they were originally sent to?
Thanks again for all your help.

I need help with document in email

Need help with document from email

Have you updated to the latest version of Adobe Reader? Have you read the Help file in Reader about bringing PDFs from an email?

Little help with making an email form.

can any of you lovely, lovely people point me in the
direction of a good Dreamweaver CS3 tutorial on how to make an
email form. Preferably one with a "conform email address" text
field.
Thanks all!
P.S. I have tried looking.

There is god general training available at www.lynda.com .
Its $25 a month for online video viewing. The title is called
Dreamweaver CS3 - Beyond the Basics.
I also would recommend a free form mail solution like
www.tectite.com which I have used before. It is more powerful that
the spry widget in dreamweaver, but is on the server side and not
the user application side.

Email linEmail link to Yahoo Mail does not work in in FF26.0 Windows 7, 64 bit computer?

as above

Do you mean, for example, that if you click a link like this:
[email protected]
Firefox does not start a new message in Yahoo! mail?
I think you will need to set Firefox to use Yahoo! mail using the Options dialog. Please see this article for the steps: [[Change the program used to open email links]].
Does that work?
Or if you can't open Yahoo! mail at all, try going in through one of these addresses:
* Yahoo home page: https://www.yahoo.com/
* My Yahoo page: https://my.yahoo.com/
* General mail redirect: https://mail.yahoo.com/
Note that many users have discovered problems with bookmarks they saved for the "old" Yahoo mail and need to update them to work with the "new" (neo) Yahoo mail.

Help with DSL Transition EMail

Sir / Madam,
I am a one man operation that suggests tech to small businesses. I am also one of your customers.
One of our common customers {edited for privacy} needs FIOS. We asked and asked over the years and were put off.
The owners need to put in a video system. DSL cannot handle the bandwidth. So we needed to look elsewhere. Comcast was able to provide the services needed. We set about an orderly transition. It has been complicated with the fact that much of the business before this year was done using an email address, (I will give you the name later)@ Verizon.Net.
We tried calling your business offices a number of times and got a new answer every time we called. Since you record calls for customer service improvement, I am sure you can find some of the calls. I can give you a list of phone numbers Verizon was called from if you want to track this down.
We bounced all over your systems from corporate to residential to the KeepMyEmail.com in order to preserve the email address.
But your corporate system is just too confusing. The email address is lost. Evidently no one can tell us how to get it back. It seems that the wall of your DSL systems are preventing the transfer of this email – even to the client’s residential account as a sub-account.
Yesterday, I was promised a call back from a manager today from one of your staff – and it is now after 5 pm on a Friday. We are blown off yet again. No one can tell me how to get into your corporate chain, so I am sending this email blindly to you in the hopes it can get to someone who can help.
This auto body shop needs access to its email. What can be done to help these people? I cannot believe that your company is that inflexible to business that this email address is lost to your system forever.
This company put faith in you that you would take care of its business needs. It marketed itself along with your product. All advertising literature had both company’s names displayed when it says [email protected]. Now if a customer sends an email to this address and it bounces back it looks bad for both entities. Even if we can get a way to forward this email to another address or give a reply back that is enough. The shop would pay a fee to you for that – we even attempted to do that with the KeepMyEmail.com system you control.
I cannot imagine Verizon is opening an auto body shop and wants to steal the customers of this establishment. It is not like Verizon needs this email address for anything.
How can we work together to set this right?
Thank You
{edited for privacy}

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Help with making an Email Submit button on a form!

Im making a form using livecycle for the first time.
Im trying to put on it a email submit button - i used email submit field and made the button. Then in the Objects Palette, in the box that says email address i put in the email address that i want it to be sent to. I then tried to email the form, and i received an email, but the attachment was just a bunch of codes, not the form. I want the email to come through with the PDF form.
I searched on help and this is what i found:
3.
In the Control Type area, select Submit. Data will be submitted according to the settings in the Submit tab.
4.
Click the Submit tab and type the URL protocol in the Submit to URL box.
To
Use this URL protocol
Example
Submit the package to an ftp site
ftp
ftp://ftp.gnu.org/gnu/GPL
Submit the package to a web server
http
http://myserver/cgi-bin/
Submit the package to a secure web server
https
https://myserver/cgi-bin/
Submit the package to an email address
mailto
mailto:[email protected]
5.
Select PDF from the Submit As list.
I cant find where to change these options - can someone help?
Thanks!

Hi,
The issue is that if the form is not Reader Enabled, then users with Reader cannot submit the form as a PDF.
They can submit it as an XML file and then you would re-import this back into the form on receipt. It is an extra step, but it does have the advantage that the data being submitted as an XML file is very small.
If you really need/want the form to be submitted as a PDF AND your users have Reader, then the form will have to be Reader Enabled.
There are two options:
Reader Enable using Acrobat Standard (version 9) or Acrobat Professional (version 8). This will give certain rights, like the ability for users with Reader to save the form and for the form to be submitted as a PDF. However there are licensing restrictions, see EULA.
The other option is to Reader Enable the form using LiveCycle Reader Extensions ES2. This is a server product, which entails additional cost and a cost to Reader Enable each form. It is intended for processing large volumes of forms/large volumes of data.
There is a summary here:
http://assure.ly/gYyYc2
So there are a couple of options.
Form NOT Reader Enabled:
Users cannot save the data they input.
Data must be submitted as an XML file and processed on receipt.
Form IS Reader Enabled:
Users can save the data they input.
Data can be submitted as a PDF (or XML file).
Hope that helps,
Niall
Assure Dynamics

URGENT! Help with creating more than one linked button

Hi!
Could someone help a newbie with trying to figure out this.
I work in Flash CS3, AS3.
I've created a button that links to another webpage by using this code (the code is added to a separate layer):
import flash.events.MouseEvent;
steud.addEventListener(MouseEvent.CLICK, onMouseClick);
function onMouseClick(e:MouseEvent):void
var request:URLRequest = new URLRequest("http://www.xx.html");
navigateToURL(request, "_blank");
It works just fine, but the problem is that I want to add more buttons (and links) to it, and thats where I get stuck. When I try just adding a new layer and adding the code there, everything stops working. I've also tried copy/pasting the code beneath the first one, with no results.
Does anyone know?
/J

I will try
I've modified this tutorial http://www.tutcity.com/view/create-a-sliding-content-with-back-and-forward-navigation.2394 7.html and the intent is to make a sliding menue that contains images of plants that link to the url of the plant. I've got buttons (with a mouse over effect that shows the name of the plant), and in AS2 I could use GetURL to link an invisible button to the URL, but to create the sliding effect, I had to use AS3. I've understood that GetURL doesn't work in AS3.
In scene 1 I have three layers; content, arrows and actions.
The actionscript looks like this:
// File downloaded from www.riacodes.com
import com.greensock.*;
var arrayX :Array = [0,-800,-1600,-2400,-3200,-4000,-4800];
var currentIndex : Number = 0;
left_mc.addEventListener(MouseEvent.CLICK,navigate);
right_mc.addEventListener(MouseEvent.CLICK,navigate);
left_mc.buttonMode = true;
right_mc.buttonMode = true;
checkArrows();
function navigate(e:MouseEvent):void{
if(e.currentTarget == left_mc) currentIndex --;
else currentIndex ++;
checkArrows();
TweenLite.to(content_mc,.5 ,{x:arrayX[currentIndex]});
function checkArrows():void{
if(currentIndex == 0) left_mc.visible = false;
else if (currentIndex == arrayX.length - 1) right_mc.visible = false;
else{
left_mc.visible = true;
right_mc.visible= true;
On the content layer I have the backgroundimages that slides as a movieclip.
If I doubleclick on the movieclip I have two layers, one with the bakground images and the invisible buttons, and one layer where I've put the script:
import flash.events.MouseEvent;
JC.addEventListener(MouseEvent.CLICK, onMouseClick);
function onMouseClick(e:MouseEvent):void
var request:URLRequest = new URLRequest("http://www.blomsterbolaget.se/vaxtsidor/Dracaena_fragrans_JC.html");
navigateToURL(request, "_blank");
JC is the instance name of one of my buttons. So far everything works, but I want to add linking to another button, and I'm not sure how to do this correctly. When I've created the invisible buttons, I've drawn a square, converted it to a button, named it, and named the instance name. Changed the Alpha to 0. I've also added an On mouse over effect, but I don't think that has anything to do with this.
Hope you can help med!
/J

Help with ecomerce and dynamic table link

I am new to dynamic pages. I am trying to build or use a
template to display my tables.
Here is an example of what I want to do.
http://www.snaz75.com/ if you
click on any of the links on the left side, it brings up the
products on the right. I know this is done through tables. I have
the website built and the tables built, but don't know how to get
the product to display dynamically without manually adding each
item.
I am using yahoo e-commerce and have downloaded their table
formats. I have all the tables created and uploaded to my hosting.
I am trying to use these tables to display my product in a simple
way. Yahoo has a site builder where you can build tables and upload
them and your product is displayed, but I am extremely limited on
the actual design of their website builder. I want to use my
website, but do essentially the same thing. How can I get the built
tables display my products. I have 1000's of products and I know
there must be a way display the item through a table using
template.. I can't imagine someone adding one item at a time to
their website. Any idea's where to start.

I have checked with method GET_ATTRIBUTE_VALUEHELP_TYPE of interface IF_WD_CONTEXT_NODE_INFO, on an attribute which i know to have a search help (Foreign key of a check table).
The method returns 'N', that is the constant IF_WD_VALUE_HELP_HANDLER~CO_VH_TYPE_NO_HELP. So, the framework was not able to find a suitable search help.
Using method GET_ATTRIBUTE_VALUE_HELP of the same interface, on the same attribute, returns me '111', which is constant C_VALUE_HELP_MODE-AUTOMATIC.
Therefore, the WD framework knows it has to automatically detect a value help, but fails to find one.
Also, this means in my opinion that the ALV and the dynamic external mapping are not the culprits: since node creation, no help is detected for any attribute but the date. Honestly, I don't have a clue on what's happening.

Collage Students need help with Java project(Email Server) whats analysis?

Hi im studying in collage at the moment and i have just started learning java this semester, the thing is my teacher just told us to do an project in java , since we just started the course and i dont have any prior knowledge about java i was wondering if some one could help me with the project.
i choose Email Sevice as my project and we have to submit an analysis and design document , but how the hell am i suppose to know what analysis is ? i just know we use ER diagrams & DFD's in the design phase but i dont know what analysis means ?
could some one tell me what analysis on an email service might be? and what analysis on a subject means? is it the codeing involved or some thing coz the teacher told us not to do any codeing yet so im completly stumped,
oh and btw we are a group of 3 students who are asking u the help here coz all of us in our class are stupmed ?

IN case any one is interested this is the analysis i wrote
ANALYSIS
Analysis means figuring out what the problem is, maybe what kinds of solutions might be appropriate
1.     Introduction:-
The very definition of analysis is an investigation of the component parts of a whole and their relations in making up the whole. The Analysis done here is for an emailing service called Flashmail, the emailing service is used to send out mails to users registered with our service, these users and there log activities will be stored in some where, the most desirable option at this time is a Database, but this can change as the scope of the project changes.
2.     Customer Analysis:-
We are targeting only 30 registered users at the moment but this is subject to change as the scale changes of the project .Each user is going to be entitled to 1MB of storage space at this time since we lack the desired infrastructure to maintain anything higher than 1MB but the end vision of the project is to sustain 1000 MB of storage space while maintaining a optimal bandwidth allocation to each user so as to ensure a high speed of activity and enjoyment for the Customer.
The Service will empower the user to be able to send, read, reply, and forward emails to there specified locations. Since we are working on a limited budget we can�t not at this time enable the sending of attachments to emails, but that path is also left open by modularity of java language, so we can add that feature when necessary.
3.     Processor Load Analysis:-
The number of messages per unit time processing power will be determined on hand with various algorithms, since it is best not to waste processor power with liberally distributing messages per unit time. Hence the number of messages will vary with in proportion to the number of registered users online at any given time.
4.     Database Decision Analysis:-
The High level Requirements of the service will have to be decided upon, the details of which can be done when we are implementing the project itself. An example of high level requirements are database management, we have chosen not to opt for flat files because of a number of reasons, first off a flat files are data files that contain records with no structured relationships additional knowledge is required to interpret these files such as the file format properties. The disadvantages associated with flat files are that they are not fast, they can only be read from top to bottom, and usually they have to be read all the way through. Though there is are advantages of Flat files they are that it takes up less space than a structured file. However, it requires the application to have knowledge of how the data is organized within the file.
Good databases have key advantage over flat files concurrency. When you just read stuff from file it�s easy, but tries to synchronize multiple updates or writes into flat file from scripts that run in different process spaces.
Whereas a flat file is a relatively simple database system in which each database is contained in a single table. In contrast, relational database systems can use multiple tables to store information, and each table can have a different record format.
5.     Networking Analysis:-
Virtually every email sent today is sent using two popular protocols known as SMTP (Simple Mail Transfer Protocol) and MIME (Multipurpose Internet Mail Extensions).
1.     SMTP (Simple Mail Transfer Protocol)
The SMTP protocol is the standard used by mail servers for sending and receiving email. In order to send email we will first establish a network connection to our SMTP server. Once you have finished sending your email message it is necessary that you disconnect from the SMTP server
2.     MIME (Multipurpose Internet Mail Extensions)
The MIME protocol is the standard used when composing email messages.

Help with ActionScript/PHP email form

Hey guys, hope someone can help me out with this!
Haven't programmed in a while, but a friend asked me to look
at this and figure out why it isn't working. It's a simple form,
with the text boxes labeled inTxt_1, inTxt_2 ..... inTxt_13.
The ActionScript looks like this ...
Code:
submit.onRelease = function () {
var loadv = new LoadVars();
loadv._level0.mc1.inTxt_1 = _level0.mc1.inTxt_1.text;
loadv._level0.mc1.inTxt_2 = _level0.mc1.inTxt_2.text;
loadv._level0.mc1.inTxt_3 = _level0.mc1.inTxt_3.text;
loadv._level0.mc1.inTxt_4 = _level0.mc1.inTxt_4.text;
loadv._level0.mc1.inTxt_5 = _level0.mc1.inTxt_5.text;
loadv._level0.mc1.inTxt_6 = _level0.mc1.inTxt_6.text;
loadv._level0.mc1.inTxt_7 = _level0.mc1.inTxt_7.text;
loadv._level0.mc1.inTxt_8 = _level0.mc1.inTxt_8.text;
loadv._level0.mc1.inTxt_9 = _level0.mc1.inTxt_9.text;
loadv._level0.mc1.inTxt_10 = _level0.mc1.inTxt_10.text;
loadv._level0.mc1.inTxt_11 = _level0.mc1.inTxt_11.text;
loadv.send("email.php",loadv,"POST");
(Quick question ... why is the _level0.mc1 part needed? Or is
it even required?)
Here's the PHP ...
Code:
<?php
$To = "[email protected]";
$subject = "site reply";
$Name = $_POST["inTxt_1"];
$Email = $_POST["inTxt_2"];
$Company = $_POST["inTxt_3"];
$Position = $_POST["inTxt_4"];
$Address = $_POST["inTxt_5"];
$Address1 = $_POST["inTxt_6"];
$Address2 = $_POST["inTxt_7"];
$ZipCode = $_POST["inTxt_8"];
$Country = $_POST["inTxt_9"];
$Tel = $_POST["inTxt_10"];
$Enquiry = $_POST["enquiry"];
$Comments = $_POST["inTxt_11"];
\$headers = "From: " . $_POST["inTxt_1"]. "<" .
$_POST["inTxt_2"] .">\r\n";
$headers .= "Reply-To: " . $_POST["inTxt_2"] . "\r\n";
$headers .= "Return-path: " . $_POST["inTxt_2"];
$message = "Name: $Name\n";
$message .= "Position: $Position\n";
$message .= "Company: $Company\n";
$message .= "Email: $Email\n";
$message .= "Address: $Address\n";
$message .= "Address1: $Address1\n";
$message .= "Address2: $Address2\n";
$message .= "Zip Code: $ZipCode\n";
$message .= "Country: $Country\n";
$message .= "Enquiry: $Enquiry\n";
$message .= "Phone: $Tel\n";
$message .= "Comments: $Comments\n";
mail($To, $subject, $message, $headers);
Print "Your mail has been sent";
?>
(Another question - why does the one $headers line have a /
infront of it? Should it be there?)
Now when I submit it, "Your mail has been sent" appears on
the screen, but I don't receive an e-mail. Can anyone help me??
Thanks so much!!
~Ganj

all those loadv._level0.mc1.whatever variables are incorrect.
they should be:

I need help with setting my button to link to my website! URGENT HELP!!!!

Hello everyone. Lately, I've been trying to link a button to my site with Action Script 3, however, whenever I try to load my movie, I keep getting an error! The error says: Scene 1, Layer 'Button', Frame 1, Line 5 1071: Syntax error: expected a definition keyword (such as function) after attribute fuction, not pes.
This is what I wrote...
stop();
peshp_btn.addEventListener (MouseEvent.CLICK, pes);
fuction pes(e:MouseEvent):void{
var pesLink:URLRequest = new URLRequest("http://www.penguinentertainmentstudios.com");
navigateToURL(pesLink,"_blank");
PLEASE HELP ME I IVE BEEN TRYING FOR ALMOST 2 HOURS NOW!!!!!

Use the following:
peshp_btn.addEventListener(MouseEvent.CLICK, pes);
function pes(event: MouseEvent) {
var pesLink:URLRequest = new URLRequest("http://www.penguinentertainmentstudios.com");
navigateToURL(pesLink, "_blank");

Help with Subaccounts Where Email is Linked to Yahoo

Similar Messages

Maybe you are looking for