Help with superstar2 GPS receiver

hello every1,
I have a superstar2 gps receiver...I am trying to get the binary data
into LABVIEW 8...but I get only junk characters(encoded binary) into
labview..when I run the simple read and write binary.vi file....But if
I rightclick on the read binary file then I get to choose the
hexadecimal option...the readings are in hex form ..but how do I get
binary format...

hello every1,
Thanx for replying...I tried using the below attached files which were found on that particular link..and it worked fine...but I want to get this data into graph plotting format(i.e in the form of X,Y and Z format).It would be great if some1 could help me out with this issue..
-thanx
innovator81
Attachments:
GPS.llb ‏488 KB
Garmin Comms.llb ‏140 KB
Get RMC_GGA.llb ‏164 KB

Similar Messages

I need urgent help with the GPS

i've ask my family to buy Nokia n 97 from syria,while i live in cyprus,how ever i got the phone with a card inside the box says:
this nokia device has been specially designed and manufactured for this market.the satandard GPS features have been disabled in accordance with market regulations.
im using this mobile for the second day,i can't send it back to syria and i don't know what to do,i can't connect with the gps system in cyprus and i can't connect with the internet,please help me to find a way to enable the GPS system in my phone.
THanks a lot

As I explained in an earlier post, you WILL NOT be able to do it yourself.
If the hardware is just disabled (the error message may be misleading), a Nokia service point may be able to reactivate it, though you'd have to pay because the phone only has warranty in Syria and because this wouldn't be a warranty fix anyway.
If the hardware is removed, then you are more than likely stuck.

N95 8GB with external GPS receiver

Not being too happy with the internal receiver on my N95 I bought and external one (HBTGPSOL BT Solar GPS Bluetooth GPS Receiver by Hamletcom.com).
It is very easy to connect by bluetooth but I cannot figure how to switch the phone from using the internal receiver to the bluetooth one.
Any ideas ???
Message Edited by linwood on 23-Jun-2008 12:15 PM

You will get a meassage asking you whether or not you want to activate bluetooth everytime you run Maps. If you say yes, it goes to bluetooth if you say no it goes to the internal GPS receiver.
There is no real need to disable the others.

Mac Air use with Bluetooth GPS receiver.

GlobalSat BT-821 appears to meet the specs and claims to work with Apple but online forums are littered with compatibility problems, though most appear to be iPad and iPhone specific. Mac Air doesn't get a mention.
Anyone got any advice on choice of receiver?

ExtGPS does the job. Should be operable with most mapping applications.
Works even with two E90's, other one running Nokia Maps and using other as external GPS over Bluetooth

I need some help with my GPS issue

I'm writing to ask you if You could somehow help me solve my GPS issue. I own Nokia 5800 XpressMusic. I've recently updated it's software and installed the new OVI Maps. I know that there is an option to use it offline which means without an Internet connection. When I start the Maps application and choose the offline mode, the only thing that appears at the top of the screen is "Searching position". The map is available but my position can't be specified without Internet on. When I turn my wireless router on, even though my maps are set in offline mode, it automatically connects to the Internet and spends something like 5KB download. If I keep navigating it spends even more. I've left my mobile phone offline to search for my position for an about half an hour but nothing happened. So, my question is, could you tell me what to do and how to use OVI Maps offline?

Assuming you are useing Maps 3.06 from beta labs and the map data is the latest compatible maps installed through ovi suite, then all should work well provided you followed the installation instructions correctly. If you don't use assisted gps or any other method of positioning except integrated Gps then you need to be in an open space with clear view of the sky to allow the GPS antenna to get a lock, this can take 10 to 30 minutes (the first time you try for a lock, shouldn't take that long again) and once you have a lock the location should work fine. The reason the other methods are available is thet they speed up the whole process and also work when in built up areas where buildings can block thre satelite view from the gps antenna. The amount of data used to lock your position is minimal and unless you have zero data allowance I suggest using all the positioning methods. If using the navigation abroad, you can disable evrything and simply use integrated GPS as long as you've loaded the local map data to your phone previously.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Newbie Help with N8 Gps

hi guys. first post....
I bought a nokia n8 from a local store. it is a second hand unit. i am from south africa.
So, when i turned on the phone, i saw the operator logo "3" So I assume the phone was bought outside my country.. Anyway, the phone works fine.... Then i tried the gps functionlity of the phone.
i cannot get a lock on my position. I tried a few things suggested on this site. I tried: soft reset, changed the position server form "supl.nokia.com" to "supl.google.com", deleted "supl.nokia.com" access point, switched off agps, network and switched it back on and also i downloaded an app "legps" but my gps still don't function.
Here's the deal. When I switch on the internal gps, agps, then i get no lock. it searches forever. When I select "network" only, I get the message "My position within 300m" But when I turn on the intergrated, apgps with network, then i get the message "My position within 300m" So I assume when "network" is selected, my cell phone operator assist in getting my position. But my internal gps is not working... So I think it could be the fact that it it's not accessing the correct server? Cause I deleted the supl.nokia.com server. Tried to add it again but couldnt add an access point in the positioning server. Shouldnt of deleted it in the first place.....
The only thing I can think of is changing the server. Here's another thing. When I set the phone to ofline mode, and then go to position server settings, I see another server appearing with the this line:
h slp mnc001.mcc655.pub.3gppnetwork.org. But when I activate "general" profile again, then that server disappear. I guess it has something to do with the country server settings?
I don't know what to do. please help.
Regards

hi. sorry for the delayed reply.... timezones.. anyway i tried downloading the software to reinstall on my phone but couldnt cause of internet problems.. So i searched the net and i came across this:
This is really great news for those with NOKIA 5800.
I have no idea if it works at all locations / country / are, but does not prevent you to try.
As we all know GPS on our phones is a tragedy at the time of the hooks on the TV, I personally wanted to disengage while hooked and want out.
And now I've found that in my opinion, really:
Go to: Settings / Phone / Application / Settings / Positioning / Positioning Server / Server Address
and the possibility that the "Positioning Server" - "supl.nokia.com"
with this: "h-slp.mnc015.mcc234.pub.3gppnetwork.org"
MCC MNC
214 01 Vodafone Vodafone Spain Operational GSM 900 / GSM 1800 / UMTS 2100
"H-slp.mnc001.mcc214.pub.3gppnetwork.org"
214 03 Orange France Telecom Spain SA Operational GSM 900 / GSM 1800 / UMTS 2100
"H-slp.mnc003.mcc214.pub.3gppnetwork.org"
214 04 Telstra Xfera Moviles SA Operational UMTS 2100
"H-slp.mnc004.mcc214.pub.3gppnetwork.org"
214 TME 05 Telefónica Móviles Spain Operational GSM 900 / GSM 1800 / UMTS 2100 Used by resellers
"H-slp.mnc005.mcc214.pub.3gppnetwork.org"
214 06 Vodafone Vodafone Spain Operational GSM 900 / GSM 1800 / UMTS 2100 Used by resellers
"H-slp.mnc006.mcc214.pub.3gppnetwork.org"
214 07 movistar Telefónica Móviles Spain Operational GSM 900 / GSM 1800 / UMTS 2100
"H-slp.mnc007.mcc214.pub.3gppnetwork.org"
Then restart your phone, it is desirable.
We also advise you to copy the old / supl.nokia.com / note address somewhere to have it in your phone
It is copied from a site which was translated through google...I think if i can add a south african server in server settings then maybe it can work? regards

Help with displaying image received from socket on Canvas

Dear programmers
I know that I'm pestering you lot for a lot of help but I just got one tiny problem which I just can't get over.
I'm developing a remote desktop application which uses an applet as it's client and I need help in displaying the image.
When a connection is made to the server, it continuously takes screenshots, converts them to jpg and then send them to the client applet via socket communication. I've got the the server doing this in a for(;;) loop and I've tested the communication and all seems to be working fine. However the applet is causing some issues such as displaying "loading applet" until I stop the server and then the 1st screenshot is displayed. Is there a way to modify the following code so that it displays the current image onto a canvas while the next image is being downloaded and then replace the original image with the one which has just been downloaded. All this needs to be done with as little flicker as possible.
for(;;)
    filename = dis.readUTF();
    fileSize = dis.readInt();
    fileInBuffer = new byte[fileSize];
    dis.readFully(fileInBuffer, 0, fileSize-1);
    //Create an image from the byte array
    img = Toolkit.getDefaultToolkit().createImage(fileInBuffer);
    //Create a MyCanvas object and add the canvas to the applet
    canvas = new IRDPCanvas(img, this);
    canvas.addMouseListener(this);
    canvas.addKeyListener(this);
    add(canvas);
}

Anyone?

Help with solution for receiver axis soap multipart

Hi everybody.
I've read many questions made by people to this forum with no possitive results to my issue.
I'm developing a simple scenario : RFC>XI>Webservice in a sync way. I call a FM in an R3
backend and i must retrieve a string from the webservice.
First thing i've noticed is that the webservice only works if i set the external definition of it
in RPC mode. If not, i get the error 'method retrieveData' not found.
Second thing is that conventional SOAP receiver adapter doesn't work. I must use AXIS option.
So, i must use RPC mode with AXIS receiver.
No i've met another problem. When i check sxi_monitor, i have my FM response empty. This is because
i'm not retrieving the same message that is defined in the webservice. I retrieve a multipart
message with 3 parts : document-0, document-1 and document-2. I think that response message
mapping is not working because as document-0 comes a different structure that the one defined
in message mapping.
These are the the things i've tried :
Use of Payloadwapbean in receiver soap axis adapter. I can't put as document-0 the one that has the field i need.
I tried with ABAP-Mapping but when i try to find the field <name>, is not there.
Now, i'm thinking in other two solutions. first, develop a module to enhace the SOAP axis receiver.
First question about this .. will i have the 3 'attachments' so i can get the <name> field?
Can i use AXIS handlers to get the complete payload (i've read abput it but i don`t understand
how to do it)?.
Kind regards,
Inigo

Hi again,
This is what i get in SXI_MONITOR.
In payloads, i have 3 :
document-0
document-1
document-2
Double clicking in document-0, i get :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ZF_ARQ_DOCUMENTUM_WEBS.Response xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <DATOS>
<item />
</DATOS>
</ns1:ZF_ARQ_DOCUMENTUM_WEBS.Response>
This is the answer of the message mapping, but is empty.
Double clicking in document-1 i get :
<?xml version="1.0" encoding="UTF-8" ?>
- <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:RetRecuperar" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://model.servicio.procop.sgce.aragon.es" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<datos xsi:type="xsd:base64Binary">SUkqANQAAABX</datos>
<retorno href="#id1" />
</multiRef>
Here is the field i need, 'datos'.
Finally, in document-2 i get :
<?xml version="1.0" encoding="UTF-8" ?>
- <multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns3:Retorno" xmlns:ns3="http://model.servicio.procop.sgce.aragon.es" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<errorMessage xsi:type="xsd:string" />
<excepcion xsi:type="xsd:string" />
<retCode xsi:type="xsd:string">OK</retCode>
<errorCode xsi:type="xsd:string" />
</multiRef>
If i use a test program, such as SOAPUI, i get this answer :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <ns1:recuperarResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="urn:MiNameSpacePrueba">
         <recuperarReturn href="#id0"/>
      </ns1:recuperarResponse>
      <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:RetRecuperar" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://model.servicio.procop.sgce.aragon.es">
         <datos xsi:type="xsd:base64Binary">SUkqANQAAABX</datos>
<retorno href="#id1"/>
      </multiRef>
      <multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns3:Retorno" xmlns:ns3="http://model.servicio.procop.sgce.aragon.es" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
         <errorMessage xsi:type="xsd:string"/>
         <excepcion xsi:type="xsd:string"/>
         <retCode xsi:type="xsd:string">OK</retCode>
         <errorCode xsi:type="xsd:string"/>
      </multiRef>
   </soapenv:Body>
</soapenv:Envelope>
I don't know why i'm getting these 3 documents because in message mapping, the response method of the WSDL is completely different than the message i'm retrieving as the answer.
Thank you for your answers,
Kind regards,
Inigo.

I need some help with my GPS

I'm writing to ask you if You could somehow help me solve my GPS issue. I own Nokia 5800 XpressMusic. I've recently updated it's software and installed the new OVI Maps. I know that there is an option to use it offline which means without an Internet connection. When I start the Maps application and choose the offline mode, the only thing that appears at the top of the screen is "Searching position". The map is available but my position can't be specified without Internet on. When I turn my wireless router on, even though my maps are set in offline mode, it automatically connects to the Internet and spends something like 5KB download. If I keep navigating it spends even more. I've left my mobile phone offline to search for my position for an about half an hour but nothing happened. So, my question is, could you tell me what to do and how to use OVI Maps offline?
Solved!
Go to Solution.

Those are the only two sets of settings you need to change to use Ovi Maps without incurring network charges. There is no other setting. Try checking them again.
Start Ovi Maps, click on the Spanner icon>Internet>Connection>Offline
Exit to the main phone menu, then Menu>settings>Phone>Application settigs>Positioning>Positioning methods>make sure only Integrated Gps is ticked.

Help with FCC on receiver side

Hey guys
i have an XML structure on the receiver side as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Invoices xmlns:ns0="urn:NOVInvoiceToSCO">
   <Invoice>
      <InvoiceProperties>
         <InvoiceNumber>sdds</InvoiceNumber>
         <InvoiceDate>dsd</InvoiceDate>
         <VendorNumber>dsd</VendorNumber>
         <InvoiceTypeCode>rer</InvoiceTypeCode>
         <PrimaryCurrency>
            <CurrencyCode>dd</CurrencyCode>
            <ExchangeRate>dsd</ExchangeRate>
         </PrimaryCurrency>
         <PaymentTerms>sd</PaymentTerms>
      </InvoiceProperties>
      <InvoiceDetails>
         <InvoiceLineItem>
            <WorkOrdernumber>dsd</WorkOrdernumber>
            <LineItemNumber>dsd</LineItemNumber>
            <InvoiceQuantity>
               <Quantity>ds</Quantity>
               <UnitOfMeasureCode>ds</UnitOfMeasureCode>
            </InvoiceQuantity>
            <LineItemInformation>
               <LineItemMaterialNumber>sds</LineItemMaterialNumber>
               <LineItemDescription>dsd</LineItemDescription>
            </LineItemInformation>
            <Pricing>
               <UnitPrice>
                  <MonetaryAmount>dsd</MonetaryAmount>
                  <UnitOfMeasureCode>dsd</UnitOfMeasureCode>
                  <CurrencyCode>sds</CurrencyCode>
               </UnitPrice>
            </Pricing>
            <LineItemtotal>
               <MonetaryAmount>sd</MonetaryAmount>
               <CurrencyCode>ds</CurrencyCode>
            </LineItemtotal>
            <Requisition>
               <Number>ds</Number>
               <LineItemNumber>ds</LineItemNumber>
            </Requisition>
            <Status>sd</Status>
         </InvoiceLineItem>
      </InvoiceDetails>
      <InvoiceSummary>
         <TotalLineItems>ds</TotalLineItems>
         <InvoiceTotal>
            <MonetaryAmount>ds</MonetaryAmount>
            <CurrencyCode>ds</CurrencyCode>
         </InvoiceTotal>
         <Tax>
            <TaxTypeCode>sd</TaxTypeCode>
            <TaxAmount>
               <MonetaryAmount>ds</MonetaryAmount>
               <CurrencyCode>s</CurrencyCode>
            </TaxAmount>
            <TaxReference>ds</TaxReference>
         </Tax>
      </InvoiceSummary>
   </Invoice>
</ns0:MT_Invoices>
<InvoiceProperties> is the header
<InvoiceDetails>is the data
<InvoiceSummary>is the trailer
i am using the following on the receiver side under FCC
Recordset Structure: Invoices,Invoice,InvoiceProperties,PrimaryCurrency,InvoiceDetails,InvoiceLineItem,InvoiceQuantity,LIneItemInformation,Pricing,UnitPrice,LineItemTotal,Requisition,InvoiceSummary,InvoiceTotal,Tax,TaxAmount
Invoices.fieldSeparator     'nl'
Invoice.fieldSeparator     ,
Invoice.endSeparator     'nl'
InvoiceProperties.fieldSeparator     ,
InvoiceProperties.endSeparator     'nl'
PrimaryCurrency.fieldSeparator     ,
PrimaryCurrency.endSeparator     ,
InvoiceDetails.fieldSeparator     ,
InvoiceDetails.endSeparator     'nl'
InvoiceLineItem.fieldSeparator     ,
InvoiceLineItem.endSeparator     'nl'
InvoiceQuantity.fieldSeparator     ,
InvoiceQuantity.endSeparator     ,
LineItemInformation.fieldSeparator     ,
LineItemInformation.endSeparator     ,
Pricing.fieldSeparator     ,
Pricing.endSeparator     ,
UnitPrice.fieldSeparator     ,
UnitPrice.endSeparator     ,
LineItemTotal.fieldSeparator     ,
LIneItemTotal.endSeparator     ,
Requisition.fieldSeparator     ,
Requisition.endSeparator     ,
InvoiceSummary.fieldSeparator     ,
InvoiceSummary.endSeparator     'nl'
InvoiceTotal.fieldSeparator     ,
InvoiceTotal.endSeparator     ,
Tax.FieldSeparator     ,
Tax.endSeparator     ,
TaxAmount.fieldSeparator     ,
TaxAmount.endSeparator     ,
Now i want the output of the following form
Header
Data
Trailer
Note:Data has occurence 0--* and both header and trailer have occurence 1
i m unable to get the CSV file on the receiver side,can anbody cross check my parameters and lemme know whr i m wrong?
thanx
ahmad

Hi Ahmad,
give recordsetstructure : InvoiceProperties,1,InvoiceDetails,*,InvoiceSummary,1
and in key-value pair give:
InvoiceProperties.fieldFixedLengths : length of fields of InvoiceNumber,InvoiceDate..etc similarly for InvoiceDetails and InvoiceSummary
InvoiceProperties.fieldSeparator , similarly for InvoiceDetails and InvoiceSummary
Then you will get your req CSV file.
Thanks,
Rajeev Gupta

Need help with my file receiving method ??????

Hi, I have a method that can recieve files from other peers. Currently, it can recieve any file name such as d1.txt, d2.txt ...d5.txt. However, my method doesn't know the file name of the file it is recieving and assigns it to c:\\files\d1.txt. How can I change my method so that It knows what the file name is that it is receiving and assign it properly? thanks
public void receive() throws IOException {
                try {
                        ServerSocket ss = new ServerSocket(1234);
                        while (true) {
                                Socket s = ss.accept();
                                BufferedInputStream bis =
                                        new BufferedInputStream(
                                        s.getInputStream());
                                FileOutputStream fis =
                                        new FileOutputStream(c:\\files\d1.txt);
                                BufferedOutputStream bos =
                                        new BufferedOutputStream(fis);
                                int c, i = 0;
                                c = bis.read();
                                while (c != -1) {
                                        bos.write(c);
                                        c = bis.read();
                                bos.flush();
                                bos.close();
                                fis.close();
                                bis.close();
                                s.close();
                } catch (Exception e) {
                        System.out.println(e);
        }

I see two options:
1. send (and thus receive) the file name first
2. use a static variable that you increment for each new file
Kind regards,
  Levi
PS. your writing algorithm is very slow, right?

Help With GPS options

I am using my phone and do not want any "data" transfer so the carrier doesn't pick my phone up as a smart phone. The phone is a 700. Note that I do have Mobile Data turned off and Allow Mobile Data Usage set to in home network only. Having the Data Usage settings configured that way might override how the following is set or should be set.
I am confused by all the "Positioning Methods" and other options. These are located under Settings/Applications Settings/Positioning/Positioning Methods. Here you have -
1- Assisted GPS
2- Integrated GPS
3- Bluetooth (self explanatory)
4- WiFi Network
5- Network Based
What are the differences in these options and which one or combination can I run for the best performance but without incurring any data charges? To further complicate things under Settings/Application Settings/Map Apps/General there are several additional options I do not understand exactly.
1- Connection- either offline or online?
2-Network Destination- either Internet, multimedia message or WAP services
As a comment to Nokia, the manual sure leaves a lot to be desired. There should be an option by option explanation for these items along with a zillion more that I find on the phone but not in the documentation.
Thanks for your help all.

The attached User Guide should answer all the queries.. refer Pg. 6/7 for the First Part of query .. and Pg. 4 for the Second.. Network Destination should be 'Internet'
Integrated GPS and Bluetooth GPS will give you Navigation without incurring any Data cost. But for the later you will need an external GPS receiver. The FIX will take much longer with the Integrated GPS.
Note that the User Guide is for Maps 3.06 but holds good for your query ..
Attachments:
Maps-3-0_SR6_EMEA_en_TOUCH-Update.pdf ‏292 KB

Nokia LD-4W GPS receiver with 5800 XM

Is Nokia LD-4W GPS receiver compatible with Nokia 5800? Is it better / more accurate than 5800 built-in GPS receiver?
Solved!
Go to Solution.

LD-3W:
65g (still feels really light)
15 hours operating time
7 Days Standby
It is also a nice small size being compact and light
LD-4W:
31g
11 hours operating time
4 days standby
The only real thing the LD-4W is better than the LD-3W with is looks. Personally-especially as its cheaper-I would go for the LD-3W.
CJSS IT & Multimedia Solutions
http://cjss.eu.org
Was I Helpful? Please Kudos (To Kudos press the green star on the left, thanks.)

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

Help with ATT email setup. Was working fantastic but can no longer send or receive email.

I have been having problems with sending and receiving emails on both my macbook and my Ipad using my att.net email for over a month. I didn't change any of the original settings when that happened but after trying to fix it after scouring the internet for help I have my settings like this on my Ipad. Actually I have two separate ones trying to get either to work.
First one: Yahoo!
Outgoing mail server - SMTP Yahoo!SMPT Server
under advanced Primary serve - Yahoo! SMTP Server On
I can't find anyplace else to change the settings.
If I am missing a place to go, please explain exactly how I find it.
Second one:"my user name"@att.net
Imap Account info
Host Name Inbound.att.net
Username: "[email protected]"
Passsword ***********
Outgoing mail server
SMTP outbound.att.net
under the advanced
Use SSL on
Autentification PW
IMAP Path Prefix /
Server Port 993
I think it is imap although I have used pop, also. The error message i get is:
SMPT:"email address"@[email protected] is not correct.
I don't know where it is drawing that from. I'm willing to eliminate all ATT associated accounds on my ipad and begin again if someone can help me get it set up correctly. I have all these mac products so i can seemlessly work on all my devices. Right now, I'm not a happy camper.
I am having similar problems with my MacBook Pro so if there is someone outthere that is using ATT as their email address and using it successful on their Apple devices, I would sure appreciate any help I can get. BTW, ATT help line is useless on this.
Thank you!

Hello and Welcome to Apple Discussions ...
I don't know if this is a corrupted preference file or not, but it sure can't hurt to try this.
If Mail is open, Quit Mail.
/Users/YourName/Library/Preferences/com.apple.mail.plist
Drag that .plist file to the Desktop. Launch Mail and see if you can send or receive e-mail. If you can, that .plist file is corrupted. Drag it to the trash, empty the trash and reboot. Your Mac will create a new preference file for you the next time you launch Mail.
Also... run Disk Utility and Repair Disk Permissions. Disk Utility is in your Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, click Repair Disk Permissions. Quit DU when it's finished and reboot.
Carolyn

Help with superstar2 GPS receiver

Similar Messages

Maybe you are looking for