Help with sync 30 gbyte with computer

Hi , I have a 30 gb Ipod, ever since I downloaded the new version of Ipod 7.1.1 I cannot sync my Ipod with my computer. My Ipod goes into do not disconnect mode and my computer does not recognice that the Ipod is connected.
My son has an Ipod and the same thing happens to him on my computer, however he has ver 5 of itunes on his computer and it has not problem recognising that my Ipod id connected, can some one help me or give me a link to and older version of itunes since that seems to be the problem.
Thanks in advance
Iddy

You've been through all these?
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive

Similar Messages

Can you help me sync music from my computer to the ipad?

Can you help me sync music from my computer to the ipad?

It's discussed in the iPad User Guide:
iPad User Guide - For iOS 7 (October 2013)Nov 1, 2013 - 23 MB

Need some help with computation

Hi, I need some help with the following:
My page 3 is a form thats shows, among other things, a document ID (:P3_DOC_ID). Next to this item I have created a button that calls a document selection form (page 10).
On selection this forms sets 2 items:
P10_SELECTED (Y or N)
P10_DOC_ID (the selected documents ID value)
When the user selects a document he returns to the calling form.
On page 3 I now try to capture the selected values. For a test item I managed to do this by defining this items source as:
[PL/SQL function body]
begin
if V('P10_SELECTED') = 'Y'
then
return V('P10_DOC_ID'); -- selected value
else
return V('P3_TEST'); -- else the original value
end if;
end;
However I want P3_DOC_ID to capture the selected value. I tried using a computation but that did not work. Any ideas?
thanks Rene

You might want to check if the "Source Used" attribute for P3_DOC_ID is set to always or to "only when ..." it sounds like you need it set to "only when ..."
If that does not work try this
Place the following in a pl/sql anonymous block and turn off your
computation.
if :P10_SELECTED = 'Y'
then
:P3_DOC_ID := :P10_DOC_ID; -- selected value
else
:P3_DOC_ID := :P3_TEST; -- else the original value
end if;
Justin

Help with Computer Purchase

Im not even sure I am in the right community but here it goes I am looking at getting new computers for my wife and me we are looking at getting 2 MBA's and one 27" iMac. I have searched the internet high and low and cannot come up with a definitive line of answers. My questions are what size would be best for the MBA's we both love the 11' but I don't know if its worth the sacrifice of 3 hours battery life and the size/ footprint secondly is the flash storage 128/256/512 I will be getting 8gb ram on either. Taking into consideration the 27" we are looking at will be nearly maxed graphics card/i7/8gb ram I will be upgrading to 32gb after we get it dont want to pay apple prices but the drive is killing me I have no idea what to get I was really only considering ssd not sure what size 256/512/1tb but then there the fusion. We will also be getting a 2tb time capsule so i thought I would be able to get away with 512 but the 1tb keeps coming up in my mind any advice on these questions would be very helpful I have been racking my brain trying to decide. Also my usage will be a large shared iTunes library music,vids whatever else probably lots of pics and a bit of documents we are both in school lastly I was wondering about futureproofing and the expected life of the computers Thank You for all advice

For the iMac 27" a fusion drive (3TB) may be suitable, and because these handle stored files differently than a two HDD computer, with automatic file movement, there is quite a bit to know about them. There are some Support articles on a variety of topics including the airport Time Capsule, and Time machine software; also migration assistant and other things. And user accounts, permissions, privileges, sharing, etc.
Not sure about 'futureproofing' computers, unless you happen to need sturdy workhorse machines you can personally swap out parts, troubleshoot, and repair yourselves. The design is going away from that standard.
Some people with a more mobile lifestyle may consider a Mini computer and an iPad that could act as a display and also a keyboard to the Mini; plus have a regular keyboard and display for the Mini Mac. But that's probably an acquired taste. The MacBook/Air models with 256GB SSD would be plenty fast, not sure about the actual battery life between the 11" and 13" models. The only MacBook model left with an optical drive built-in is the low-end MacBook/Pro 13", so if you don't mind a non-Retina display, a little more weight, it is an OK choice at less cost. I'd probably get that, because I archive digital images to DVD media and also to external HDD. The Apple USB external superdrive may be a necessity, but other brands are said to be OK.
Learning how to use the Recovery and backup systems in these newer computers and whatever OS X version they have installed (Mavericks may be a free download, not included inside some) so there is a ton of stuff to consider. Each device that can see the airport Time capsule may want to use it as a backup, so that would not suffice for three Macs to have one, but you could backup and even clone complete system copies to other fast USB3.0 or FireWire800 externally enclosed self-powered hard disk drives, as these could boot and run their original host computer. A timemachine backup can't.
I fear that I could write a few hours and really say nothing; however I have read about most problems and issues, support related and service, at least online; and see there are some items I would avoid. In fact my hardware is not new and the OS X is a bit dated. I have other interests nowadays and no longer do the 'cutting edge' or retail thing. But then, I'm not sold on a smart phone yet either. I prefer to be by myself to think, and research more directly.
However, as I age my photographic memory has faded some...
Good luck & happy computing!

Need help with computer freezing up.

I seem to be having some trouble with my computer freezing up from time to time. Usually it's when I'm using the program Transmission or Toast Titanium. I can't access the applications files, the Dock icons or do any force quit on the programs. Also I can't do a restart or shut down. I have tried using the keystrokes to shut down and restart, but as well this doesn't work. Everything gets frozen. The only way I can stop the freeze is to manually turn the computer off by the on/off button in the back of the computer. I have heard it is really bad to do so. What else could I do when the computer is frozen like this to get it unstuck? Also being that this has happened a few times, how do I correct the programs so that it won't keep happening?
Thanks.

Hi,
When you run a program in Mac it loads the necessary information to the RAM and access it from there. If other programs are running in the computer along with the Toast Titanium then there is a possibility of the memory unable to address all the requirements. The best way is to keep an eye on the memory usage from Activity monitor when you start using the Toast next time.
While trying to burn the data into a CD the files are first loaded into the memory so that it will be written to the disk. So what I will suggest is to close all the applications and wait for a reasonable amount of time to see whether the computer frees up memory and starts to write onto the disk.
If not, you will also need to free up some hard drive space.
Also in the ~/Library/Logs/Crash Reporter look for crash files and see what is causing the issue.
Shutting down the computer with the Power on/off button is not that good however if nothing else is working, you have no choice other than that.
Hope that helps....
I wanted to add few more tips.

Help with computer setup and PP settings for faster/better previews

I have been using Cyberlink PowerDirector software for video editing. It is very easy to use and can do quite a bit. It was also accelerated by Intel HD graphics built into my system, so I could see a lot of my work at a pretty high resolution in real time.
However, I wanted to see what PP was capable of, specifically the Warp Stabilizer.
So I downloaded PP and have been trying to use it, but it was just slow as heck to preview anything (chop stop chop stop...), with render times being insanely long (12 hours for five minutes of footage vs. about 30 minutes with PowerDirector).
Thinking it was a problem with my system and I needed to get a real graphics card, I got an EVGA GTX 670 (FTW) for $400, and popped it in. I modified the text file so PP would see it as a compatible card, opened up PP and changed the engine to the new card.
Things are faster, but I was expecting a lot more. Here's what I'm doing:
1. Shooting Canon 5D mark II (now III) clips 20-60 seconds long, 1080p.
2. Import to PP and sequence them.
3. Adding effects:
     A. Top adjustment layer for fast color correction (white balance)
     B. Next adjustment layer: 3-way color, shadow/highlight, unsharp mask, fast blur
     C. Video 1 layer has the clips with warp stabilizer applied to each, and dissolves.
My final output will be 720p. ( I shoot 1080p so the Warp Stabilizer will have more to work with, and I can crop without feeling like I'm degrading quality).
My system: i7 2600k, 16GB RAM, GTX 670 graphics, 120GB SSD "Max IOPS", 2TB 7200rpm internal, 2TB 7200rpm external (USB 2.0, backup drive).
I can currently preview at 1/4 res in realtime. I would really like to be able to get to 1/2 res (of course full would be great). One thing that worries me is that GPU-Z indicates that my GPU is only running at about 2% while previewing, while CPU usage is at around 50%. I was under the impression that the Mercury thing would use GPU/CUDA to process previews and effects that are supported (that includes Warp Stabilizer).
I've looked at Sequence Settings and fiddled with Preview File Format and size, but that doesn't seem to do anything. I'm currently looking around at codecs (Cineform, DNxHD), but don't know if those can help.
What settings should I alter to get better previews?

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Help with computer and Mountain Lion

I am running Snow Leopard on my iMac but cannot upgrade to Mountain Lion because my computer was purchased in early 2007. Is there any way to get the iCloud for this computer?

If your Mac meets the following requirements you can upgrade to Lion:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
However Lion is not available directly from the Mac App Store, having been replaced by Mountain Lion, but you should be able to get it by ringing 1-800-MY-APPLE if you're in the USA, or the number given at bottom left of this page for other countries.

HT1420 help with computer authorization

How do i authorize a my apple laptop to my sons i tunes account?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Help with computer. will not do nothing after did factory reset

I had trouble starting computer and reset to factory. Now it says windows is missing or corrupt. I need to put windows 7 back on. Not sure what to do. I have a windows recovery disc but its not working. I have a G71-340US HP Notebook 64-bit

Enter BIOS by tapping the F10 key immediately after powering on. Use diagnostics to test the hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Help with computer program

Hi, I am very new this and could sue some help..
import java.util.*;
public class CarSort
public static void main(String[] args)
final int ARR_SIZE = 30;
final boolean DEBUG = true;
final String SENT_DBASE = "EndDatabase";
final String SENT_SEARCH = "EndSearchKeys";
Car[] carArr = new Car[ARR_SIZE];
Car car1;
Scanner scan = new Scanner(System.in);
String
make;
int
year,
numCars,
pos;
double price;
numCars = 0;
make = scan.next();
if(DEBUG)
System.out.println("\nDB make = " + make);
while(!make.equals(SENT_DBASE))
if(!scan.hasNextInt())
System.out.println("ERROR1: no nextInt.\nStop!");
System.exit(0);
year = scan.nextInt();
if(DEBUG)
System.out.println("DB year = " + year);
if(!scan.hasNextDouble())
System.out.println("ERROR2: no nextDouble.\nStop!");
System.exit(0);
price = scan.nextDouble();
if(DEBUG)
System.out.println("DB price = " + Car.twoDecPl.format(price));
car1 = new Car(make, year, price);
numCars++;
carArr[numCars - 1] = car1;
make = scan.next();
if(DEBUG)
System.out.println("DB make = " + make);
private static void selectionSort(double[] dA, int n)
double temp;
int posMax;
for(int i = n - 1; i > 0; i--)
posMax = 0;
for(int j = 1; j <= i; j++)
if(dA[j] > dA[posMax])
posMax = j;
temp = dA[posMax];
dA[posMax] = dA;
dA[i] = temp;
printData(carArr, numCars);
make = scan.next();
if(DEBUG)
System.out.println("\nSearch, make = " + make);
while(!make.equals(SENT_SEARCH))
if(!scan.hasNextInt())
System.out.println("ERROR3: no nextInt #2.\nStop!");
System.exit(0);
year = scan.nextInt();
if(DEBUG)
System.out.println("Search, year = " + year);
if(!scan.hasNextDouble())
System.out.println("ERROR4: no nextDouble.\nStop!");
System.exit(0);
price = scan.nextDouble();
if(DEBUG)
System.out.println("Search, price = " +
Car.twoDecPl.format(price));
car1 = new Car(make, year, price);
System.out.println("\nSearch key =" + car1);
pos = seqSearch(carArr, numCars, car1);
if(pos >= 0)
System.out.println("This vehicle was found at index = " + pos);
else
System.out.println("This vehicle was not found in the database.");
make = scan.next();
if(DEBUG)
System.out.println("\nSearch, make = " + make);
private static void printData(Car[] carArr, int numCars)
System.out.println("\nPrint out the database.");
for(int j = 0; j < numCars; j++)
System.out.println(carArr[j]);
private static int seqSearch(Car[] carArr, int numCars, Car key)
for(int j = 0; j < numCars; j++)
if(carArr[j].equals(key))
return j;
return -1;
This code is giving an illegal start error on private static void selectionSort(double[] dA, int n), So can someone tell me (and also explain why) how to fix this?

You are declaring
private static void selectionSort(double[] dA, int n)within your main method. (Probably you just forgot the closing brace } )
You can't declare a method in a method.

Need some help with computer AL-300

Hi
Please kindly I want to recorded my laptop under warranty, but I dont how I right it .
Please help me to do it .
Thanks & best regard

Hello my friend
Please don't be mad on me but your posting is not understandable.
Notebook model description is also wrong, so please be nice and send us exact and correct notebook model description (check grey label at the bottom side) and explain to us what do you want to do exactly.

TS3899 Spent long hour in Mac store having them help me sync my contacts from computer mail into iphone 5. The command was turned off that kept the mail from being synced also. Now no mail comes into phone, so must be a setting that needs to be turned bac

Need help to know what settings will allow phone to receive mail again after technician forgot to reset that command

Need help to know what settings will allow phone to receive mail again after technician forgot to reset that command

Help with iPad/iPod syncing & Playlists

Not sure if this is the right fourm to ask, but here goes. Why is it that sometimes I can not sync my ipad/ipod to new playlists that I have created in itunes or add music to either of them.
Thanks for any help.

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
It is very easy if all the media is already in the iTunes library.

Syncing IPod to new Computer, HELP!

I got a new computer (my old one quit working) and I need to sync my IPod to the new computer. Problem in it won't let me! Itunes wants to delete everything on my IPod. It only registers the songs I bought on the old computer (and I have a ton of other music that I had purchased before even the last computer. How do I reverse sync (my IPod to my computer? I had, had an external hard drive with music on it, but that all was wiped out and change to Adobe files when I hooked it up to the new computer. HELP!

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.

Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Help with sync 30 gbyte with computer

Similar Messages

Maybe you are looking for