Help with texts being deleted?

My options were set that texts should be saved for 15 days. This morning all of my texts were deleted except saved texts. I figured maybe it just deleted all texts after 15 days maybe instead of deleting texts over 15 days old, so I set it on the "forever" setting, that they would never be deleted. I've gotten more texts today and they all disappeared again. I haven't changed any other options that should be at all related to my text options, and I don't know what to do? One of the texts actually deleted itself as soon as it came so I couldn't even read it. I have no idea what's going on. Phone is very new, only had it about two weeks.

This is happening due to memory constraints on your device. In BlackBerry when the device couldn't find enough free space for its work it clear out your text messages and call logs. You can check the amount of free space on your handheld from options -> Status -> free space (given in bytes).
For viewing details database sizes check the following - options -> Status -> click Menu button and select Database size. It’s recommended that you move your picture from device memory to Media card. Keep calendar items for pas 15 days and also keep messages for lower date range.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • Help with 3d being disabled on Photochop CS6

    I have recently received an error message that indicates that my graphics card is not able to handle 3d-this has not been the case-I also have been able to utilize Poser 9 and Daz 3d without difficulies.  No the 3d portion of Photoshop CS 6 is disabled both on the 64 and 32 bit versions.  Any suggstions for what I believe to be an error?

    I  am at work now so, cannot check in with device manager.  I have a ATI Radeon 5770.  This is from memory and I believe it has 1 gig of ram.  I have been able to run Z Brush, Vue, Brice, Poser, Daz etc... with this card, so 3d does not seem to be the problem.  I have also been able to run CS6 3d before example: using the postcard function in a graphic that I made.
    John Waller <[email protected]> wrote:
    John Waller http://forums.adobe.com/people/John+Waller created the discussion
    "Re: Help with 3d being disabled on Photochop CS6"
    To view the discussion, visit: http://forums.adobe.com/message/5337813#5337813

  • Please Help with text parsing problem

    Hello,
    I have the following text in a file (cut and pasted from VI)
    12 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 ^M
    12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 ^M
    12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 ^M
    12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 ^M
    12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 ^M
    12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 ^M
    12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 ^M
    this method reads the text from a file and stores it in a ArrayList
        public ArrayList readInData(){
            File claimFile = new File(fullClaimPath);
            ArrayList returnDataAL = new ArrayList();
            if(!claimFile.exists()){
                System.out.println("Error: claim data - File Not Found");
                System.exit(1);
            try{
                BufferedReader br = new BufferedReader(new FileReader(claimFile));
                String s;
                while ((s = br.readLine()) != null){
                         System.out.println(s + " HHHH");
                        returnDataAL.add(s);
            }catch(Exception e){ System.out.println(e);}
            return returnDataAL;
        }//close loadFile()if i print the lines from above ... from the arraylist ... here is waht i get ...
    2 15 03 12 15 03 81 5 80053 1 1,2,3 $23.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84550 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84100 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 83615 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 82977 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 80061 1 1,2,3 $44.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 83721 1 1,2,3 $15.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84439 1 1,2,3 $44.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 84443 1 1,2,3 $40.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 85025 1 1,2,3 $26.00 1 HHHH
    HHHH
    12 15 03 12 15 03 81 5 85008 1 1,2,3 $5.00 1 HHHH
    HHHH
    I see the ^M on the end of the lines ... but i dont understand why im getting the blank lines
    in between each entry ... I printed "HHHH" just to help with debugging ... anyone have any ideas why i am getting the extra blank lines?
    thanks,
    jd

    maybe its a FileReader deal.. Im not sure, maybe try using InputStreams. This code works for me (it reads from data.txt), give it a try and see if it works:
    import java.io.*;
    public class Example {
         public Example() throws IOException {
              BufferedReader b = new BufferedReader(new InputStreamReader(new FileInputStream("data.txt")));
              String s = "";
              while ((s = b.readLine()) != null) {
                   System.out.println(s);
              b.close();
         public static void main(String[] args) {
              try {
                   new Example();
              catch (IOException e) {
                   e.printStackTrace();
    }

  • Issue with emails being deleted from my Yahoo mail folders

    Hi, I am experiencing an issue where emails are being deleted from my Yahoo mail folders when the weekly Sunday night purge of the Yahoo Trash folder is carried out by Yahoo. These are mails that have been moved from my inbox via the iphone mail app.
    I have a similar problem with Outlook 2010 on my laptop but not with Outlook 2003 on my desktop.
    When I move the emails from my inbox I have noticed that using Outlook 2003, the moved email is left in my inbox in "strikethrough" mode whereas on Outlook 2010 it is deleted from my inbox. I subsequently purge the marked email from my inbox in 2003.
    I am able to see and access the emails in the folder I have moved them to until after midnight on Sunday when they dissappear. The emails moved via 2003 are ok and not lost.
    Funnily enough when using an earlier version of the iphone mail app I remember that I could see emails in "strikethrough" mode in Outlook 2003 when they had been moved via the iPhone mail app but you don't see that now.
    It feels like some sort of pointer issue to me ...... any ideas on how to stop this happening?.

    This is now fixed !!!! I am not sure how though :-((
    I reported the problem to Yahoo and in the process of them investigating the issue my sub-folders suddenly became invisible via my IMAP connection and then also were invisible on-line following a log out and a log in. After my initial panic, I contacted Yahoo who were able to restore my complete account. Since then, the problem has gone away.
    I have been testing this for two weeks and all is working perfectly from whatever device I use to connect to my mail (IMAP or via my browser).
    Phew!

  • F4 Help with text table in WD abap

    Hi,
    i am using country related input help with check table T005 in one of table and i want to display the country text along with country id in my table, f4 for country is coming however if i select country from f4 it showing country id in the input field of table.
    i want to have country text also in one of my input fields in the table, i have seen f4 help works if we have explicit search help and using parameter assignment we can have id and text defaulted if we use same context for id and text fields,  however in this case country table t005 has check table t005 where texts are stored in text table t005t so web dynpro abap is't picking up the texts??
    please suggest how can i get the texts as soon as i select country in the f4??

    Hi Kranthi,
    You merely have to have an internal table storing list of countries, which you only need to do once, e.g. on load of application (method WDDOINIT of COMPONENTCONTROLLER). In your view, you have to declare a method for event onEnter of the input field, but this method doesn't have to have any code. Your code will be in method WDDOBEFOREACTION, where you read get country name from country key. Once you've got country name, transfer value to a context attribute to which you've already mapped as a source for attribute value of the UI element.
    Check out SAP Webdynpro component FITV_IMG_DEFHTLCATA -> view V_ITEM.

  • New to After Effects - need help with text manipulation!

    Hi all, I'm new to AE and this forum and I'm looking for some advice. I've been asked by the boss at work to create a short video clip, around 10-15 seconds, where text is displayed on the screen (3 words), after the few seconds, I want a 'forging' noise to happen and the final word in the text to be changed to another word and have a metallic effect applied, similar to the effect in this tutorial:
    Create Hot Metallic Text in After Effects - After Effects - macProVideo.com Hub
    Will this be difficult to do and do you guys think a complete beginner like myself can do it? I've got a lot of experience with the likes of PS, so I'm not too shy with Adobe software.
    Thanks,
    John

    johnster1991 wrote:
    Thanks for the advice, I appreciate it. So will it be difficult to have one word of text come onto the screen and overlay on top of the existing text, as if it's crashing over it? Any ideas on the steps I would use to do this? Thanks
    As you begin your career of using AE, you will change your vocabulary. Overlay will be replaced with spatial references like in front or behind.
    Designing text with surface styles like chrome or metal is not difficult. You can even import them from Photoshop if you have some PS chops or friends who can do it quickly.
    TEXT ONE can be easily replaced with TEXT TWO in any of dozens of different ways but to drop TWO in front of ONE is easy, you're just setting position keyframes. The finesse of animation, though, lies in the illusion of motion, exaggeration, overshooting and recoil. Your TWO could fall and squish and rebound and bounce or it could raise a dust cloud as it hits or it could make the camera wiggle. These are the things that separate simple key framing from animation and motion graphics.

  • IPhone 5 trouble with words being deleted as I text

    When I start texting, all of a sudden my phone starts deleting whole words that I just typed in...automatically. Out of nowhere. It will also add periods, double letters, etc. This just started happening today, and I've had the phone since it first came out.  Any suggestions on how to correct this?  Thanks!

    Yeah I went to the 3 store and they said that it costs if they find it's a software issue (which I believe isn't fair). However, after sending mine off and having it back exactly the same I headed off to the 3 store and asked to see what they could do for me. Of course, they can't touch Apple phones so they kindly phoned Apple again for me to only say that Apple have NO record of me even sending my phone off even though I have written and e-mail proof. They then said that they replaced my phone in which they didn't. So I spoke to the senior supervisor who said for me to send it off again (yawn) but to be replaced and if it doesn't then I have to e-mail her directly. It's such an annoying issue because I'm still paying for my phone when I can't even use it.
    My advice is, definitely go to the store. Even-though they can't actually replace it there and then or send it off themselves to be repaired but they (should) phone up Apple and help you further. Apple shouldn't be asking you for such an upfront cost without even looking at your phone as it could be another issue.
    That's me up to date. Sending it off tomorrow, hopefully receive a replaced working phone now.

  • Help with text formatting in Stickies

    I just discovered the Stickies app and it's almost perfect for helping me keep track of my tasks and to-dos. However, I'm slightly obsessive on minor details so I have a few questions:
    Is it possible to center the text without having to paste from another source? I've set the style the way I want it in Word and then paste it into a new note where it looks perfect. Large bold centered text. I go to Note > Use as Default but the text alignment isn't saved. I saved the style as a favorite but have to drill down the styles dialogs just to center text. I'll be creating an deleting a lot of these during the day and it's actually easier for me to read these when the text is centered.
    Same as 1 but for line-spacing. When I try to set the default with 1.5x line spacing new notes are created in 12pt Time New Roman
    Is there a way to set it so that Command+Shift+Y always does a Paste and Match Style? My current workaround is to select all and then paste style to set them as the default font.
    Thanks!

    I had the same problem with CP7 and just upgraded to CP8.01. This version seemed to format my long answers almost perfectly when I imported the first two question pools - then it reverted back to the same old CP7 behavior. This makes me think that there must be a way to do this.
    Update: Here's the workaround that I've used to get these "long questions" and "long answers" to fit into the multiple question Master Slide. I copied then duplicated the "MCQ, T/F, FIB, Sequence" Master Question slide. On the new one, I expanded the Question area box, both horizontally and vertically so it will accommodate even very lengthy questions.
    I then did the same for the answers area - I have to adjust both so they didn't overlap - and I reduced the size of my "Review Area" since I won't be needing it in my exam format. After saving my project, I then imported a new question pool that was in GIFT format. Of course all of them are imported using the original "MCQ, T/F, FIB, Sequence" Master Question slide format. But now I can view my "Question Pool"  (Windows > Question Pool), then select all of them (Control, A) then in the "Properties" tab you should have a pull down that allows you to select the new question master slide you just created. Select it and all of your imported slides now should display properly.
    Note that this seems to work only when your answers can fit on two lines - not three lines or more. But if you've stretched wide the answer area box in you master slide this will work for most long answers.

  • New bee looking for applescript help with text edit app

    I have a huge text files (20+) , I want to find a list of words like weather, farmers, ploughing. I want to find these words one at a time, as my text file is 250+ Mb in size.
    I want applescript to count the how many times each word appears in the text.
    Paste that occurrence of word into an spreadsheet file in a row named after text file , and in a column named weather, farmers, ploughing.
    Please help.
    Thanks much.
    CF
    PS so far I can open the text files with applescript, that is about the extent of my ability in programing.
    Message was edited by: coldfusions onco

    For a file of that size, you would need to use some shell utilities to get decent performance. To count words, the following script breaks up the text into words, then counts the number of times the specified word is found (a dictionary file is used as an example, so the match is equivalent to 'contains'):
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    font-weight: normal;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #DAFFB6;
    overflow: auto;"
    title="this text can be pasted into the Script Editor">
    set theFile to "/usr/share/dict/web2" -- a 2.5MB list of words
    set someWords to {¬
    {theWord:"weather", theCount:0}, ¬
    {theWord:"farmers", theCount:0}, ¬
    {theWord:"ploughing", theCount:0}}
    repeat with anItem in someWords
    set aWord to quoted form of theWord of anItem
    try -- break up into individual words, then search and count
    set theCount of anItem to (do shell script "tr -cs '[:alpha:]' " & quoted form of linefeed & " < " & theFile & " | grep -ic " & aWord) as integer
    end try
    end repeat
    someWords
    </pre>
    Is this related to your Automator post?

  • Urgent - help with Text direction in InDesign CS4

    Hello,
    I use InDesign CS4 on Windows 7. It's a standard version (without options for right-to-left languages).
    Whenever I make a new text frame, it seems to have a right-to-left "logic" of the text. The text types left to right, but the period in the end would go all the way right.
    It also mixes up tabs. It looks like this:
    Instead of:
    Usually I get around it by pasting another correctly formatted text-frame or text, and it works.
    Now I'm trying to create a new document with master frame (in order to be able to easily change the layout successively of a many-paged document), where I need to insert existing (formatted) text. But this text take this "right to left logic", whether I past the text, or even a whole text frame.
    I could find nothing in the character/paragraph options to get rid of this.
    I would greatly appreciate if you could help me.
    with respect,
    Jerusalem Nun.

    This behaviour is normal. Changing the default property of any style, when no document is open, changes the style for every new document, but not for existing document.
    Take a look what is your basic style where all other styles are build up on it, in your case, go to the paragraph style and look what is the basic style which was used.
    If the default style was used (it is the one in brackets), you have always a problem. You should not use it in any case.
    Because you don't have a ME version of InDesign you can't change direction directly, but you can create a new document with the default settings and the same paragraph (and character, table and cell styles) in a new document without RTL styles. Save this document, no content is required.
    Go to the 'infected' document, open the paragraph style panel and in the panel menu take "Load all text styles", select the new document and overwrite with the incoming styles.
    If necessary you might repeat it with the Table, Cell, Character and Object Styles, as all of them have some kind of direction settings.
    I don't know how good your styles were created, you have to adjust your document. And I would strongly recommend—I repeat—I strongly recommend to work always with styles.

  • Help with text message options

    Is there a way to adjust the size of the text in text messages on my Curve 8530? Or maybe make them bold or change colors? I've tried other apps that let you do this but I really like the way the native SMS works. Thanks for any help.
    Got my first ever Blackberry on 8/10/2010
    Curve 8530

    1. Put a 0 somewhere in your sheet.
    2. CTRL+C in this 0 cell.
    3. Select the column(s) which you want to convert to number.
    4. Paste Special > Add (under operation section)
    5. Now, this will convert that column completely to Numeric even if something is left out in your manual method.
    6. You may delete the 0 which you put in step 1.
    7. Make sure that lookup value is also numeric.

  • Flash Site Template Help With Text

    So I downloaded a flash template to use for my website... all I need are some editing of the texts, pictures, and some of those links. Here is the template:
    http://www.templatemonster.com/flash-templates/24451.html
    My problem is I'm completely NEW at flash. I used to use FrongPage 2003 for my webdesign but I wanna use this for my new website (since it looks a lot better!) How do I edit the text fields? I can only seem to move the bar along the timeline to watch the animation, and see all the layers and item properties that none have anything with the text in them. And also the images as well, if I need to do anything special with those (within template link above you'll see they flash white for a second) and the main logo has some animation there. I have all the fonts required but I don't know if I also have to make the logo with those special white flashy lines like a GIF animator or if that's just some special affect within the template itself.
    Now due to legal notices specified by the site I can't share the template with you but I'll attempt to answer any and all questions i can to see if I can get this all figured out so I can begin adding my own content to the site. Thanks in advance.

    Doesn't look like there's an xml file for the text. Reading the template help index, and its saying some text might have complex coding for special effects and that I'd have to edit by the Library or something, so I'll try using that reference for now. I appreciate the help and I may come back if this can't help me lol
    EDIT:   It says I'm missing the font file "tahoma" mapped to _sans    ....??  I have tahoma... as well as the main title logo isn't appearing in the .fla file anymore even though I got the correct font. I'm confused >.<
    Edit 2: As well I get this a lot on many different areas:
    Forms Component - Version 0.81
    Couldn't load configuration.
    Message was edited by: undreamingreality

  • Please help with text boxes

    Can somebody help me wit hmy problem. I have a fom with many tables in it, some cells of the table are text boxes or at least they were when I developed it. Now I need to edit some of the cells and for some reason I cannot do it as the cell is not a text box but became (untitled<draw>) I cannot change its type back to text. Can some one advise what to do whitouh retyping text again in the new cell.
    Many thanks in advance

    You are welcome!
    I have a preference for Javascript (just get in the syntax zone) and use it for most things (except dates).
    As you know:
    this = current object
    rawValue = accesses the value of object
    From an Excel point of view FormCalc is similar and has inbuilt function like sum(), Max(), etc. Syntax is $ for current object and you don't need the rawValue. This is very handy when summing a column in a repeating table. Also FormCalc is excellent for working with time and dates. (not that you can't work around in Javascript, but it is heavier).
    Adobe have a very good reference for FormCalc at http://www.adobe.com/go/learn_lc_formCalc_82 and I would recommend that to you. I think it comes from the LC help file, but is easier to use.
    From a performance point of view, you can either have FormCalc in the calculate event of an object, which looks back at other fields (this will fire each time one of these fields changes). Alternatively you can have the FormCalc in the exit event of a field, which pushes a calculation/value forward to another object.
    Functions are handy if you have a script that you are using several times in a form. You write the script in a "script variable" and then call it in the objects events. HOWEVER, script variables are available in Javascript only.
    One last thing is that if you have a constant (like VAT), then rather than including  "* 0.21" in all of your calculations, use a global variable in the Form / Properties / Variables tab. currentVat = 0.21. Then in your calculations would be "* currentVat.value". If the VAT rate changes then you only have to change it in one location.
    In summary FormCalc is more akin to Excel; just watch the syntax.
    Good luck,
    Niall

  • Help with text format

    I am attempting to emulate an example in shown in:
    http://developer.java.sun.com/developer/Books/gui/swing2/swing2_chap11.pdf
    With the following code
    fieldFormat = new NameFormat();
    JFormattedTextField rField = new JFormattedTextField(fieldFormat);
    rField.setColumns(15);
    rField.setValue(initialValue);
    class NameFormat extends Format {
         public StringBuffer format(Object obj, StringBuffer toAppendTo, FieldPosition fieldPosition) {
              fieldPosition.setBeginIndex(toAppendTo.length());
              String str = obj.toString();
              char prevCh = ' ';
              for (int k=0; k<str.length(); k++) {
                   char nextCh = str.charAt(k);
                   if (Character.isLetter(nextCh) && prevCh == ' ')
                        nextCh = Character.toTitleCase(nextCh);
                   toApendTo.append(nextCh);
                   prevCh = nextCh;
              fieldPosition.setEndIndex(toAppendTo.length());
              return toAppendTo;
    }I get the following error:
    FormattedField.NameFormat should be declared abstract; it does not define parseObject(java.lang.String,java.text.ParsePosition) in java.text.Format
    Therefore I determined there must be methods missing. Upon looking I find the following two other methods defines for Format .
    formatToCharacterIterator(Object obj) {}
    parseObject(String source, ParsePosition pos) {}
    The problem is I am unable to determine what the methods should do or look like if added to NameFormat.
    Any suggestions or help would be appreciated.
    Thanks
    rykk

    Forget it I can't chew gum and walk at the same time.
    rykk

  • Help with download and delete??

    Ok i have all my music on my library in one computer now my itouch is on auto synce..im goin on vacation so i put my itouch on manual update so i can l add songs to it from my sisters computer. now my question is when i go baq home i wanna put my ipod baq on auto update? will it delete the songs i had added while it was on manuel update beacuse there not on my itunes library??

    Well!
    Sorry if I wasn't being USEFUL, but it does help when you get the full info in a question.
    Try [TouchCopy|http://www.wideanglesoftware.com/touchcopy>, not free but I think you get a thirty day trial.
    Good luck,
    Dud.

Maybe you are looking for

  • Eclipse open project wizard - OUAF SDK 4.1 install

    After installing it for the 4th time, I give up. Please help me. (I start over with a saved image in case you wonder.) I follow the install guide word for word: http://www.box.net/shared/z86acgmb57oi9lo8f312 When I finally get Eclipse to come up to o

  • Photoshop CC 2014 3D menu functions greyed out

    I can't seem to get 3D options enabled in CC 2014.  I'm using a 2012 Macbook Pro Retina with 16gb of ram & a 1GB 650m running 10.9.3 and that well exceeds the system requirements. I have "Use graphics processor" selected in the performance tab and th

  • TRICK TO ACROBAT STANDARD?  link sends me to pro???

    What is the trick to downloading the STANDARD version?  Every time I got to the standard page and click download, it takes me to PRO, which does not work with my key.

  • Address Book broken, won't search

    Hello all, I am have a problem - Address Book is not searching or displaying info when I click on an entry... broken! Any thoughts? I have reset the power management, parameter ram and I tried to boot up in safe mode but that does't work. On support

  • Limitations of Oracle Migration Workbench in migrating sqlserver 2000

    Hello, Can one of you please point me to a doc or list of items which are NOT covered automatically (ie needs manual changes) in migrating a sqlserver2000 database to Oracle using Oracle Migration WorkBench. Thanks Cyril