Help with the forward delete key code equivalent
As a follow-up to this post:
http://discussions.apple.com/thread.jspa?messageID=702033
No problem!
*It's too bad that I can't change my alias, the Geeklord was just something I threw in there when I first registered*
oh, by the way, you can mark my post as the solution. This points it out to others and helps increase my status
Similar Messages
-
Help with the Korg nano key usb keyboard!
I recently bought the Kord Nano Key usb keyboard for the purpose of triggering drum sounds and sounds from the library. Will this keyboard do this?
I have very limited time with which to read manuals and experiment. Could anyone just tell me how to get going with this keyboard. I have installed the driver and can see that some sort of signal is getting into logic.
If it is possible, can you get me up and running quickly?
ThanksI'm assuming the Akai came with a manual, I know Logic did, you're going to have to do a little of the work yourself, your question is so vauge that no one knows what you're tried, or if you've even tried anything at all! This is professional software... you HAVE to read manuals... have you used Garageband? Have you plugged the Akai in, have you looked in Logic's online help systen to see how to load a software instrument?
Or job is not to hold your hand, this is a user forum, there are people here that will help but you need to to some work on your own. -
Why doesn't my forward delete key work on my apple keyboard with numeric keypad?
I bought a wired apple keyboard with numeric keypad to pair with my Mac Pro (late 2013) and when I try to use the forward delete key, it does nothing. I have even tried to use the fn + delete shortcut and that doesn't work either. I'm using OS X Yosemite 10.10.3. Anyone have any ideas how to fix this?
Again, waking up an old thread:
I first used an air compressor, set around 50psi, to "air out" all the ports.
Then I used a clean cloth to dab a bit of alcohol on an SD card's contacts... slid it in and out several times, dabbing a little more alchol each time... and voila!
All of our SD cards now seem to work fine... recognize, read, eject...
Also used alcohol to clean the contacts on all the cards. -
Where does a message go in Mail when one presses the forward delete key? I thought I was pressing "page down," and pressed forward delete by mistake. I thought the message would go to the Trash folder, but apparently not.
open up a terminal (either type in "terminal" in spotlight search (the magnify glass in top right corner) or in the Finder (New Folder Window) Applications -> Utilities -> Terminal) and enter:
defaults write com.apple.mail IgnoreSortOrderWhenSelectingAfterDelete 1 -
Can you help with the code to publish Flash to my own domain.
Thank you for your help, I publish the my site to my own domain, I do not use .Mac, I tested your code and ity works well on .Mac, can you help with the code to publish to my own domain.
Thank you againYou appear to have just collected a variety of code snippets and thrown them together, including a section of AS2 code ( gage.onRelease = function() {... )
The suggestion I offered yesterday still stands. You should find a tutorial regarding AS3 and the atan2 function. Beyond that, what you show suggests this is a school assignment. You should seek help from your fellow students and instructor if that is the case. -
I can't get a capital c when I press the shift key, but I can get one with the with the caps lock key. Help
Hi
How its going?
I understand that you are not able to get the capital letter c.
I want you to change the keyboard and if you have got the warranty please replace at no charge.
Chetan -
Difference Between the Two Delete Keys
I am brand new to the Mac ecosystem. Having loved my iPhones for the past two years, I have been wanting more Apple. So this past Friday, I purchased the Mac mini. Thus far, I love it, but there is a lot to learn since I have been living in Windows/Microsoft my entire life.
I am currently in the process of exploring and setting up my Mac mini, and, for some reason, iTunes decided to duplicate portions of my library. I'm not sure why, as there is no rhyme or reason to the particular files that were duplicated; either way, I think I have that issue under control.
However, when I tried to delete some of the duplicate files from the directory with the delete keys, nothing happened. With some research, I discovered that Command-delete was the necessary keystroke. It still did not work because I was trying to use the delete key next to the end key; I then tried the 'backspace' delete key, and that did the trick. So, I am wondering what the difference is between these two seemingly identical keys.wyldoxz wrote:
So, is there any reason why Command-delete(backspace) will delete a file, but Command-delete(forward) will not? My lifetime in Windows has made me accustomed to certain keystrokes (I am heavily keyboard-orientated).
Yes, they are different keys. Pressing one generates the key code that is tied to the delete shortcut. The other generates another key code which is not tied to the delete shortcut. -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Need help with the session state value items.
I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM -
I need help with the Quote applet.
Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param name="bgcolor" value="ffffff">
<param name="bheight" value="10">
<param name="bwidth" value="10">
<param name="delay" value="1000">
<param name="fontname" value="TimesRoman">
<param name="fontsize" value="14">
<param name="link" value="http://java.sun.com/events/jibe/index.html">
<param name="number" value="3">
<param name="quote0" value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param name="quote1" value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param name="quote2" value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param name="space" value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletException(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan PinnoJavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".
-
Is there a substitute for the missing Delete key?
I'm pretty unhappy with the new half bluetooth keyboard, probably because I have never been a laptop user. Big is better to me. One of the keys I am really missing is the delete key in the middle panel that deleted from the right rather than the left. I'm wondering if there is some kind of workaround to achieve that function without doing what I have been doing, i.e., moving the cursor all the way over to the right of what I want to delete and then using the remaining Delete key--a lot of trouble, I think.
Keyboard Shortcuts
-
Run quickSearch with the carriage-return key
Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.
JHS built the application and i need to do some post-generation.
I need to run quickSearch with the carriage-return key.
To do that, i replace
<messageTextInput id="searchText" name="searchText" text="${searchBean.searchText}" rows="1" maximumLength="255" columns="60"/>
by
<messageTextInput id="searchText" name="searchText" text="${searchBean.searchText}" rows="1" maximumLength="255" columns="60">
<enterClientAction>
<fireAction event="quickSearch"/>
</enterClientAction>
</messageTextInput>
The problem is the carriage-return action go systematically to the BackButtonErrorPage.
How can i solve this problem ?
Is it a good solution ?
Sorry, if my english is not very well.
Thanks
LaurentThank you Martijn for your help
I tried your solution :
In UIX :
<messageTextInput id="searchText" onKeyDown="if(window.event.keyCode==13) doSearch(event,'goSearchButton');" name="searchText" text="${searchBean.searchText}" promptAndAccessKey="& de recherche" rows="1" maximumLength="255" columns="60"/>
<button id="goSearchButton" name="goSearchButton" onClick="doDataEvent('quickSearch','quickSearch', 'true' );" text="${nls.GO}"/>
In javascript :
function doSearch(e, buttonName) {
buttonToClick = document.getElementById(buttonName);
buttonToClick.click();
The behaviour is the same, i often go to the BackButtonErrorPage but not systematically.
But if i use the search button, i never go to the BackButtonErrorPage.
I don’t undersand,
Anybody has an idea ?
Regards
Laurent -
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.
Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
ThanksHi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I need help with the processes running a media server.
Hi there! I need some help with the following log please. The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server? Is that correct? Are these common processes?
Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
CrashReporter Key: b16be41bf16206d8f231e7e71676ab2a9c4dd25e
Hardware Model: iPhone4,1
OS Version: iPhone OS 5.0.1 (9A405)
Kernel Version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date: 2012-08-24 16:06:18 -0400
Time since snapshot: 152 ms
Free pages: 1195
Wired pages: 88383
Purgeable pages: 0
Largest process: mediaserverd
Processes
Name UUID Count resident pages
atc <2271ed33ec773eeb9f381bf1baac9dee> 390
securityd <e31a714c227a3d1c98ef8aacd44d91ee> 243
assetsd <281396d3e7d831fbb6a5374157663dbc> 1370
MobileMail <7064f2baf3f23db987bc8ec99855fe53> 1438 (jettisoned)
mstreamd <cbe9881735043a389e7cdad3b5bcf5ce> 1099 (jettisoned)
Camera <88291709452932ac9cbd0f1c06902214> 3105 (active)
dataaccessd <b4f61f117ee635c48329af8572733d30> 1760
MobilePhone <fe38c6944a053c9187b41ee50aa151b0> 5549
networkd <6ee7a78e56073f6e8db4c2cc3265fdb4> 170
aosnotifyd <58089d732ab43bbea0aec4a6f812f446> 320
BTServer <e03baab8e0103188979ce54b87591065> 261
aggregated <68a25a1690cb372096543a46abed14d7> 337
apsd <e4b6e6e4f31e36f79815747ecbf52907> 291
fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17> 294
fseventsd <78af02202422321885dfc85c24534b0e> 170
iapd <3ee7f82879033b4fb93b9cf1f4ecae29> 366
imagent <8e2042f2ec9e3af9ba400f031f1bbfa7> 416
mDNSResponder <b75f43f012ad3d9ea172d37491994e22> 265
mediaremoted <b9fa7d1381013c2fa90ea134ff905f59> 258
mediaserverd <478e5e8345c83be5ba1868906813bb75> 6774
ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19> 389
wifid <e176ab123beb3000bdb89e020612c1d6> 284
locationd <91c84ab19dd03e4ab1b4cc30178ab1c0> 831
powerd <25ddef6b52e4385b819e777dd2eeed3c> 167
lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c> 250
CommCenter <51922c9a50e73fe3badccaa4b1b1123b> 781
syslogd <dd3766bcb1213e91b66283635db09773> 107
SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d> 5673 (active)
configd <3430c0025ed13f56800a329b7254d2ae> 418
notifyd <3793fabace3a385687b3c29c1fa1fcac> 252
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa> 433
launchd <cc35dd7a872334319ed028e6bbeae081> 133
**End**
Thanks a bunch!!!COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies
Maybe you are looking for
-
Can't open pages 3.0 docs with Pages 2.0
I have Pages 2.02. I am having a person create flyers for me. They are created in Pages 3.0. I am unable to open them. Is this normal, early versions of Pages cannot open later versions. There may be an answer to this but I couldn't find one. It seem
-
Error invoking target 'agent emsubagent nmo nmb' on Mac OS X
Hello, I'm working on trying to install Oracle 10g on Mac OS X 10.3.7 (The test server I am using is just OS X, not OS X Server. Right now I'm just doing an install with pretty much all defaults just to get it to install. Only thing I did was make th
-
Oracle Forms Builder 10g Questions
Good day everyone, I want to start off by saying that I'm very new to Oracle Forms Builder (it was dumped on my table about a month ago) and I'm having some issues I need resolved in order to complete a project for a client. I'm looking mainly for do
-
Basic customs and import cess flowing in MIGO
Hello , At present basic customs and import cess are flowing in the MIGO document,. The requirement is not to display the basic customs and import cess to flow. Please let us know the config related to it thanks
-
Updated last night, my keynote presentation is gone. Now trying to recreate. Keynote states that animations are not available on master slides. Help?