Help with the java system, please !!

Each time i execute the following statement,
create or replace java system;
I get the following errors:
VM: Killing process oracle
end-of-file on communication channel
Can anyone help me with this problem, please?

My platform is Linux - Red Hat 6.2 -.
I did the changes in the sizes of the java_pool and shared_pool and I got the same problem.
But, I've just fixed the problem b increasing the size of the swap partition. I changed it from 100 MB to 1000 MB. Then, I got everything very clean.
Thanks a lot for your help and your consideration.

Similar Messages

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Can anyone help with the java applet issue

Hello everyone,
This is my first thread in this forum,
I need a little help with the form developer...
I have oracle 9i db , 9i form developer
I don't want to run the form i created as a java applet
HOW IS THAT DONE i.e NOT IN THE INTERNET EXPLORER?????????
***IF ITS POSSIBLE

Hello,
I don't want to run the form i created as a java applet
No chance, because the Web Forms client is an applet and cannot be anything else.
Francois

Help me with the Reservation System Please

Hi all
I am building a website for a restaurant where the registered user can do booking in the booking page where user finds the booking form. my problem is I created the log in system but cannot workout with the booking page.
I have this scenario -
Customer visits site & registers details (name, email etc) on a "registration page" (creating a username & password which goes into your database) - done that
Next day, customer visits site and logs in on a "log in page" using the username & password from the previous day which is now stored in your database. Can now make a booking based on this log in. (cannot do this)

Please move this inquiry to the Dreamweaver Applications Development forum where you will get more server scripting exposure.
http://forums.adobe.com/community/dreamweaver/dreamweaver_general?view=discussions

Please help with Sun Java System Communications Sync crashe with IEx 7.x

Dear All!
Recently i've upgrade my IExplorer to 7.x version. After that i began to have problems with Communications Sync (latest version). When i try to sync Outlook 2003 with the server (SSL connection/ self signed certificate) the Comm Sync asks if i want to allow to open connection with wrong certificate (happed only after installing IEx 7.x) and then when i press YES it crashes.
Any help on how to fix this problem is appriciated.
Konstantin
P.S.: Adding a self signed certificate to IEx DB and adding the website to the trusted websites list did not help.

Hi,
Not sure how much we can help with this issue - especially if you are already running the latest version of the sync tool. About all I can offer is to uninstall your current sync software and reinstall the latest public version:
http://sunsolve.sun.com/private-cgi/getpatch.pl (search for patch #124734).
If that doesn't help I suggest you log a sun support case for this (assuming you have a sun support contract that is).
Regards,
Shane.

Some help with the 10g install, please.

Hi,
We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
If someone could kindly read over some of our concerns, we'd appreciate it.
First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
Any help with steps would be very helpful to us. We're getting error messages like this:
The installation of Oracle Database 10g was successful, but some
optional configuration assistants failed, were cancelled or skipped.
Please check
'/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
for more details.
UnsatisfiedLinkError exception loading native library: njni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Thank you in advance for your help.

Hi,
You are installing in same ORACLE_HOME?
Your Operation System is UNIX?
Eder

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

Help with the Java API

Search on an attribute of the custom class using the Java
API.
I taking one of the provided classes, a "VCARD Street Address."
Inserted the XML for it. Added some documents of that class.
Then I set City="Charlotte." Double-checked it in the database with
sql*plus -- I see records matching city=charlotte.
However, searching using the Java API, I comes up blank. Using the
following classes:
attributequalification
searchclause
search
*************Query Tester.java************
import java.util.*;
import java.io.*;
import java.text.*;
import java.util.zip.*;
import java.rmi.RemoteException;
// Runner Specific Imports
import oracle.ifs.common.*;
import oracle.ifs.utils.common.*;
import oracle.ifs.beans.*;
import oracle.ifs.search.*;
import oracle.ifs.adk.filesystem.IfsFileSystem;
public class QueryTester {
protected SearchClause getAttributeSearchClause(SearchClause
searchClause) throws IfsException{
try {
AttributeQualification attributeQualification = new
AttributeQualification();
attributeQualification.setAttribute("VCARDSTREETADDRESS","CITY");
attributeQualification.setOperatorType(AttributeQualification.LIKE);
attributeQualification.setValue("C%");
searchClause = new
SearchClause(searchClause,attributeQualification, searchClause.AND);
return searchClause;
catch (RuntimeException ex) {
String exceptionText = "RuntimeException in
getAttributeSearchClause(). Nested Exception:" + ex;
System.out.println (exceptionText);
throw ex;
catch (IfsException ex) {
String exceptionText = "IfsException in
getAttributeSearchClause(). Nested Exception:" + ex;
System.out.println (exceptionText);
throw ex;
protected SearchClassSpecification getSearchClassSpecification()
throws IfsException {
try {
String[] searchClasses = {"DOCUMENT","CONTENTOBJECT",
"VCARDSTREETADDRESS"};
SearchClassSpecification searchClassSpecification = new
SearchClassSpecification(searchClasses);
//searchClassSpecification.addResultClass("DOCUMENT");
searchClassSpecification.addResultClass("VCARDSTREETADDRESS");
return searchClassSpecification;
catch (IfsException ex) {
String exceptionText = "Error in getSearchClassSpecification :
" + ex;
System.out.println (exceptionText);
throw ex;
public static void main (String[] args) {
try {
QueryTester qt = new QueryTester();
System.out.println ("Logging in.");
IfsFileSystem IfsAPI = new IfsFileSystem("cvars", "cvars",
"docrunner", "ifssys");
System.out.println ("Got this far.");
LibrarySession libSession = IfsAPI.getLibrarySession();
// For every document that it a content object we want to
search
JoinQualification joinQualification = new JoinQualification();
joinQualification.setLeftAttribute("DOCUMENT",
"CONTENTOBJECT");
joinQualification.setRightAttribute("CONTENTOBJECT", null);
oracle.ifs.beans.Folder searchFolderObject = null;
searchFolderObject = libSession.getRootFolder();
FolderRestrictQualification folderRestrictQualification = new
FolderRestrictQualification();
folderRestrictQualification.setStartFolder(searchFolderObject);
SearchClause searchClause = null;
SearchClause baseSearchClause = new
SearchClause(joinQualification, folderRestrictQualification,
SearchClause.AND);
searchClause = qt.getAttributeSearchClause(baseSearchClause);
AttributeSearchSpecification attribSearchSpecification = new
AttributeSearchSpecification();
attribSearchSpecification.setSearchClassSpecification(qt.getSearchClassSpecification());
System.out.println ("Set the Search Class Specificiation.");
attribSearchSpecification.setSearchQualification(searchClause);
Search attributeSearch = new Search(libSession,
attribSearchSpecification);
System.out.println ("About to open Attribute Search . ");
attributeSearch.open();
System.out.println ("Opened the search");
SearchResultObject[] sro = attributeSearch.getItems();
if (sro!=null)
System.out.println ("Results : " + sro.length);
libSession.disconnect();
catch (IfsException ifsex) { System.out.println (ifsex); }
catch (RuntimeException rux) { System.out.println (rux); }
null

You said 'Then I set City="Charlotte." Double-checked it in the database with
sql*plus -- I see records matching city=charlotte.'
Your description uses both 'Charlotte' and 'charlotte'.
Does the word 'Charlotte' appear in the database in all lower case or mixed-case?
null

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

Help with the alarm clock, please!

i'm using the ipod mini, and every morning the alarm clock goes off with the exact same song. is it possible to make the mini choose the alarm clock's track randomly? or, at least, is it possible to choose a different song to start my morning off with?
thanks!

The iPod wakes up to a song from a playlist. It chooses the first song in the list.
Although I've never tried it, it may choose something other than the first song in the list if you set the songs to "shuffle".
Failing that, you would have to create a different playlist with a different song and select that to wake up to.

Can i get some help with the bing app please?

ironically i searched all over the bing website and couldn't find the answer to this:
on the bing commercial they show the ability to hold up your phone with the app open and on the screen you see the scene in front of you but with little popups telling you what each place is. i cannot figure out how to get the app to do that, can anyone provide instructions? thanks.

Bing Mobile email support is here:
https://support.discoverbing.com/default.aspx?%7b!%7dsource=app_iPhone&ct=eformt s&mkt=en-US&productkey=bingmobile&scrx=1&st=1&wfxredirect=1

Need some help with the autosave feature - Please!

Hello,
I started an animation in flash recently and the autosave feature was turned on. I had a good animation, but decided to play around with it a bit. After a little while, I decided to call it a night and exited the program making sure NOT to save my work. Upon opening that file the next time, I come to find out that Flash has autosaved my file while I was playing around. Now I have a worthless animation, and have to start from scratch. Is there any way to revert to a previous save, or autosave at this point, or am I about to do a lot of work again?
Thanks anyone who can help.

As far as I know, the autosave function isn't able to track down previous versions of the saved document - that calls for a specified version control system. I believe that Flash only saves the file if it is told to. There is a few ways to enable or disable autosave:
in the "New Document" dialog. you can choose to enable Auto-Save.
In the "Document properties" dialog you can set the checkmark.
If these are checked of, there isn't going to happen any auto saving. The problem may be, that there is also a topic called Auto-Recovery. Recovery and Save isn't the same when it comes to Flash, but people tend to think of them as the same. You set the Auto-Recovery feature in the Preferences under General.
Windows: Edit>Preferences : General>Auto-Recovery
Mac OS: Flash Professional>Preferences : General>Auto-Recovery
Both has a default of 10 minutes, and can therefore confuse he user. Please look at the document to make sure, that you haven't unset Auto-Recovery instead of Auto-Save. you can do that by:
Go to the preferences (Ctrl+U on Windows and Command+U on Mac OS) and check to see if Auto-Recovery is set.
Go to the documents properties (Ctrl+J on Windows and Command+J on Mac OS) and check to see if Auto-Save is set.
The first one (in the preferences) is ok to have set. It is the second one, that may have caused trouble for you.
/ockley

Help with the control files, please

When I tried to startup Oracle 8.1.6 EE R2 for the 1st time after installation on Red Hat 6.2 ... I got the following error messages in the alert_ora8.log file ...
ORA-00202: controlfile: '/ora8/m01/app/oracle/oradata/ora8/control01.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Can anyone help me, please?

If you were not user oracle with group privilages oinstall in the Linux operating system that could be the cause.
When being installed Oracle required this.
Privilages in Linux are giving me fits trying to keep straight myself.

Help with the itunes Programme PLEASE!

I would like to transfer my itunes programme and all its contents (Library etc..)to a WD Diagnostic External Hard drive to free up memory space on my computer but am unsure how to go about it without deleting my Library.
Any ideas would be greatly appreciated and please bare in mind, I am not as literate in the computer language as many of you may be. Nice and simple please. Could you please advise how I would be able to recall this from the External Hard drive to upload new music.
Cheers
Message was edited by: raromania

Tip. When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu .
Troubleshooting advice can depend on that information.
Which OS X is installed?

I need help with the processes running a media server.

Hi there!   I need some help with the following log please. The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server? Is that correct? Are these common processes?
Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
CrashReporter Key:   b16be41bf16206d8f231e7e71676ab2a9c4dd25e
Hardware Model:      iPhone4,1
OS Version:          iPhone OS 5.0.1 (9A405)
Kernel Version:      Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date:                2012-08-24 16:06:18 -0400
Time since snapshot: 152 ms
Free pages:        1195
Wired pages:       88383
Purgeable pages:   0
Largest process:   mediaserverd
Processes
         Name                 UUID                    Count resident pages
             atc <2271ed33ec773eeb9f381bf1baac9dee>     390
       securityd <e31a714c227a3d1c98ef8aacd44d91ee>     243
         assetsd <281396d3e7d831fbb6a5374157663dbc>    1370
      MobileMail <7064f2baf3f23db987bc8ec99855fe53>    1438 (jettisoned)
        mstreamd <cbe9881735043a389e7cdad3b5bcf5ce>    1099 (jettisoned)
          Camera <88291709452932ac9cbd0f1c06902214>    3105 (active)
     dataaccessd <b4f61f117ee635c48329af8572733d30>    1760
     MobilePhone <fe38c6944a053c9187b41ee50aa151b0>    5549
        networkd <6ee7a78e56073f6e8db4c2cc3265fdb4>     170
      aosnotifyd <58089d732ab43bbea0aec4a6f812f446>     320
        BTServer <e03baab8e0103188979ce54b87591065>     261
      aggregated <68a25a1690cb372096543a46abed14d7>     337
            apsd <e4b6e6e4f31e36f79815747ecbf52907>     291
   fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17>     294
       fseventsd <78af02202422321885dfc85c24534b0e>     170
            iapd <3ee7f82879033b4fb93b9cf1f4ecae29>     366
         imagent <8e2042f2ec9e3af9ba400f031f1bbfa7>     416
   mDNSResponder <b75f43f012ad3d9ea172d37491994e22>     265
    mediaremoted <b9fa7d1381013c2fa90ea134ff905f59>     258
    mediaserverd <478e5e8345c83be5ba1868906813bb75>    6774
             ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19>     389
           wifid <e176ab123beb3000bdb89e020612c1d6>     284
       locationd <91c84ab19dd03e4ab1b4cc30178ab1c0>     831
          powerd <25ddef6b52e4385b819e777dd2eeed3c>     167
       lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c>     250
      CommCenter <51922c9a50e73fe3badccaa4b1b1123b>     781
         syslogd <dd3766bcb1213e91b66283635db09773>     107
     SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d>    5673 (active)
         configd <3430c0025ed13f56800a329b7254d2ae>     418
         notifyd <3793fabace3a385687b3c29c1fa1fcac>     252
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa>     433
         launchd <cc35dd7a872334319ed028e6bbeae081>     133
**End**
Thanks a bunch!!!

COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies

Help with the java system, please !!

Similar Messages

Maybe you are looking for