Help with the new Bios 1.56 AND RAM Q

can high voltage for Ram, A-DATA 2X512 DDR500 2.85 for this case, can cause instablity, how do i know when to raise it, because it look like running fine with 2.70, and i oced it to 270mhz , 4000 in sandra. so what should the voltage be? and what problem can high voltage do?
and in the new bios there is the REFRESH RATE (TREF) and some crazy numbers, how should i know what to set it,
in A64 TWEAKER there is same option, Refresh Rate (TREF) , of course i am using the 200mhz, but can the 200mhz 15.6us cause to instabilty instead of the 3.9us ?
when ocing or not? how should i know if it causing any problems?
I am very very confused because i don't know how to oc right, i sometimes have crashes and blue screens when trying to oc, because always there is one option or setting that can make the instablity and to get real, there too Freaking many,
and how do i know for sure that Agressive timing doesn't causing to any errors or anything else? crashes and all kind.
PLZ if someone could answer those question i will be greatly happy, because i have no idea what to look for and i have some anoying problem with that, my ram is good for ocing and i really want stable ram with max speed.
and i think i am using the 1T i cant change it or anything. no where to change anyway.
THANX
AMD64 2800 NewCastle SH7-C0 1.8 @ 2.03 270FSB 1.63V
MSI K8N Nero Platinum 1.56Beta
A-DATA 2X512 DDR500 270mhz 4000sandra 3-4-4-8 1T
ThermalTake ButterFly 550Watt +12 18amp
Elsa Radeon 9800Pro 128mb 378/336
Audigy 2 ZS
PCI Latency 32Clk
FastWrite ON
i will have furture questions just need to get answers on those first.\
Hope someone could help

Quote
Originally posted by pinochio
1)Turn Fastwrites OFF
2)2.85 Volts won't hurt your Ram.(i wish MSI could give us MORE!!)
3)TRef depends on your Ram.I found mine to work best with 200 15.6us
but maybe yours doesn't.Experiment and see.
4)In the BIOS the TRef 1x,2x,3x,4x numers represent the "us" that you see above.
1x=15.6us , 2x=7.8us , 3x=3.9us, 4x=1.95us.The "cycles" you can play with.
5)Don't trust A64 for the Tref value.I have mine set to 15.6 and A64 Tweaker says 1.95
6)Use Rmma "Memory Analyzer" to see and even change your timings.
Went through the bios TREF , i have non 3X options.
This is what i found :
1:1552 100mhz 15,6us
1:2064 133mhz 15,6us
1:2592 166mhz 15,6us
1:3120 200mhz 15,6us
1:3632 100mhz 7,8us
1:4128 133mhz 7,8us
1:4672 166mhz 7,8us
2:1552 100mhz 3,9us
2:2064 133mhz 3,9us
2:2592 166mhz 3,9us
2:3120 200mhz 3,9us
2:3632 100mhz 1,95us
2:4128 133mhz 1,95us
2:4672 166mhz 1,95us
4:1552 100mhz 15,6us
4:2064 not tested ,assumed 133mhz 15,6us
4:2592 not tested ,assumed 133mhz 15,6us
4:3120 200mhz 15,6us
4:3632 not tested
4:4128 not tested
4:4672 not tested
128 cycles 200mhz 1,95us
200mhz 7,8us is missing in my system and setting it with A64Tweaker
cause windows to freeze .
You will find documentation of 1x , 2x and 4x (1K refresh,2K refresh and 4K refresh) here:
http://www.oempcworld.com/support/RAM_Technical_Perspective.htm

Similar Messages

HT4623 I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. Iff i double click on it it opens. Any i

I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
Thanks Pete

I have the same problem. Some of my purchased songs are missing also.

Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

Hi I bought the oxford dictionary app a while ago and it worked fine . Now with the new iOS it starts and closes instantly. I don't want to buy it again. Who can I turn to?

Try closing the app via the device's multitasking bar and see if it works when you re-open the app : double-click the home button to open the taskbar and then swipe or drag the app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
If the app still doesn't work then try deleting the app from your device and redownload it (assuming that it's still in the store) via the Purchased tab in the App Store app - or resync it from your computer's iTunes (if you don't have a copy of the app in the Apps part of your computer's iTunes library then copy it over via File > Devices > Transfer Purchases before deleting it).
If that also doesn't get it to work then contact the developer.

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Help with the News Widget

I am having some issues with the news widget and I don't know what I am doing wrong to have it come up like this. (I have attached a screenshot) Nothing is overlapping to make an error like this. Can someone help me?
It is supposed to be next to the grey text, not below it.

Figured out a workaround. I needed a convenient method to access the rows of the table from JavaScript. It turns out that the following works (on IE 6, anyway), though it depends on the HTML <div> tag:
<html>
<head>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<script language="JavaScript">

var d = document.getElementById('occurs');
var tbl = d.getElementsByTagName('TABLE')[0];
var r0 = tbl.rows[0];
var r1 = tbl.rows[1];
var r2 = tbl.rows[2];
r0.style.display='none';
r1.style.display='none';
r2.style.display='none';

if(tab == 'tab1')
r0.style.display='block';
else if(tab == 'tab2')
r1.style.display='block';
else if(tab == 'tab3')
r2.style.display='block';
-->
</script>
</head>
<body onLoad="javascript: selectTab('tab1');" >
<f:use_faces>
<h:form formName="entryform">
<h:selectone_radio id="EventOption" layout="PAGE_DIRECTION" valueRef="EventEntryBean.eventOption">
<h:selectitem itemValue="daily" itemLabel="wee" onclick="javascript: selectTab('tab1');"/>
<h:selectitem itemValue="weekly" itemLabel="Not-so-wee" onclick="javascript: selectTab('tab2');"/>
<h:selectitem itemValue="monthly" itemLabel="Freakin HUGE" onclick="javascript: selectTab('tab3');"/>
</h:selectone_radio>
<div id="occurs">
<h:panel_grid columns="1">
<h:panel_group>
<h:panel_grid columns="1">
<h:output_text value="wee"/>
</h:panel_grid>
</h:panel_group>
<h:panel_group>
<h:panel_grid columns="1">
<h:output_text value="Not-so-wee"/>
</h:panel_grid>
</h:panel_group>
<h:panel_group>
<h:panel_grid columns="1">
<h:output_text value="Freakin HUGE"/>
</h:panel_grid>
</h:panel_group>
</h:panel_grid>
</div>
</h:form>
</f:use_faces>
</body>
</html>

Can anyone make dreamweaver compatible with the new version of chrome and how much it would cost?

Need to have someone update my site to make it visible online - it's not showing properly in the new version of chrome --- and how much it would cost.

In addition to the numerous code errors mentioned by Jim, you're making a huge mistake with Flash navigation. It's deadly for site visitors who don't have Flash supporting devices. How will people navigate your site? I would rebuild your 5-page site from the ground up with HTML5, CSS and ditch all those old school tables.
If you're interested in a quote, you can contact me through my web site.
Alt-Web Design & Publishing Contact Form
Nancy O.

I need help with the new update

I am at a complete loss on what to do. I have been trying to install the new update but it keeps bringing up an error. I have searched on here for some solutions and I believe I am not doing this right. I have uninstalled all the items everyone has suggested (ex. Bonjour...) and rebooted. I went and downloaded iTunes again but two things keep happening:
1. While the iTunes Setup is installing and pop-up box says "Object already exists" and this pops up multiple times
and
2. After those messages go away another pop up says "iTunes Installer completed - Errorc occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again."
What am I doing wrong here? Can someone please help me? I have a Windows 7 laptop.

For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot, and try installing iTunes again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
tt2

I tried to update my iPod touch with the new 3.0 software and nothing!!

I downloaded and *PAID FOR* the new update on iTunes
BUT
after downloading it and followed everything it still says error
it keeps saying to 'restore and update' but that still doesnt work and now my iPod wont even turn on without coming up with a picture of a USB import and the iTunes symbol!! does this mean i now CANNOT USE MY IPOD?! i reeeeeeeeeally need help guys and _simpliying things is a good idea for me since im not entirely technical ^^;_I've got the latest iTunes version so i dont think it has anything to do with that. Shall i just take it into an Apple store and get them to have a look? would someone come round to fix it? _CAN ANYONE HELP ME HERE?!?!!_
thanks~

Welcome to the discussions,
try to connect in recovery mode: http://support.apple.com/kb/HT1808

Need help with the new Multi-cam feature in CC

Hi,
I'm trying to use the Multi-cam feature in CC and have a few questions, so would be happy with help/advice for any of the issues below. The platform is Windows 7 Pro 64bit.
The first question is what am I doing wrong? This question relates to the fact I'm trying to use Multi-cam and encountering a lot of frustrating glitches, as sometimes it seems to work and at others it doesn't.
The video I'm trying to edit comes from a dance show so I created a sequence called Act 1. I then highlighted the six clips of Act 1 with Cam 01 at the top, as I wanted the audio from this clip and made a Multi-cam feature using the audio synch. I dragged it to the sequence, set the prog window to Multi-cam and was amazed at how well it had synchronised all clips, as I could see all six clips with great audio synch from Cam 01. So far so good and after thinking how brilliant it was, things went downhill from there
I started by using ripple delete to drag to the start of Act one and then tried editing with Multi-cam. That's where I encountered the first problem, as sometimes it seemed to toggle between cams but didn't put edit points in and the selected cam had a yellow border and not a red one. At other times it inserted edit points when I changed cams and the selected cam has a red border. I can't work out what I'm doing, or not doing for this to happen. Can anyone help please?
The second question is how do I cut audio and video at exactly the same point, as I want to edit out pauses in between the different elements of the actual dance show. When I use the razor tool in Multi-cam it only cuts the video. I tried highliting audio and video using shift, but to no effect. If it matters audio and video are shown as linked when I right click. I thought I might get it to work if I revealed all original clips within the MC nest using the technique shown in "Adobe Learn." This was Ctrl double click, but it resulted in the third problem.
When I tried Ctrl double click I ended up with only Cam 02 showing in the V2 track and after some frustrating attempts at resolving this issue I decided to start all over again. I deleted the PP project and created a new one, importing everything again. I followed exactly the same procedure as I originally did to create a Multi-cam nest, but when I dragged it to the new sequence I saw Cam 02 in V2 of the sequence, which is the same as it was before I deleted the original project. Premiere Pro seems to have annoyingly remembered the actions that went wrong, so please can anyone tell me how to tell Premiere Pro not to do this?
Thanks if anyone can help me on any of the issues.

In Premiere Pro, multi-camera is accomplished by nesting a sequence. There's a new, more automated way of doing this in CC. View the steps here: http://blogs.adobe.com/premierepro/2013/04/a-quick-walkthrough-of-editing-a-multi-camera-s equence-with-clips-synchronized-by-audio.html
HOWEVER, you must be warned that multi-cam in CC is currently broken. A patch is in the works, but until it is released you should not use multi-cam in CC.

What's with the 'new' BIOS?

Does anyone know anything about the new beta BIOS 1.32? The text file in the ZIP sounds like 1.20, but the biggest file in there, a6702vms.132, is dated 05/02/04.

Quote
Originally posted by isimpson
Well i can tell you that at least the vCore settings are different in 1.3b2 than 1.2.
In 1.2 you could set the vCore above 1.6v! But now you can only set something like 1.57 (I can't remember exactly).
Also with this bios it seems that only the Auto vcore setting is worth using as I tried to bump mine up a little to 1.52 manually and then the vcore actually dropped to 1.3 or something!
Some weird goings on with these bios' at the moment.
On my board the highest option I've ever had was 1.55v. And I'm currently still using the 1.2 BIOS. I'll be giving 1.3b2 a shot tonight probably.

HELP with the new version of skype

Hi thank you for looking at this and spending you time please exuse my spelling and grammer I need help with my skype about the new verson i downloaded it today then boom when it said done downloading my skype was on a loading thing for my online status then i said "oh let me try to unlog then relog then it keeps giveing me this error message "Skype cant connect!" my internet works fine and no my proixy and crap like that is not messed up i have been searching the fourm for abunch of answers none of them worked please help!

ruwim wrote:
What Firewall and Antivirus applications are installed on your computer? Be aware that even expired applications may still block Skype.
I disabled my firewall and i have a Antivirus that didnt bug it before after i updated it then it stoped working

Help with the new Garageband?

I'm trying to export a file to iTunes (it's about 3 hours long) and I didn't see an option to make a podcast on the new Garageband so I just went ahead so make a regular audio file.
When I clicked on Share and tried to export it to iTunes, it said, "The bounce file exceeds the maximum file size (AIFF 2 GB; WAV 4 GB). Please change the format to CAF or decrease the bounce range."
I've never heard of CAF before and when I typed it in Help, it came up with no results. Does anybody know how I can fix this?
I even tried copying and pasting some of the audio files from my Garageband project into another one but it won't let me open two projects at the same time. I'm perfectly fine with making multiple projects in order to reduce the size and the time of the file but I don't know how or if it's even possible to save all the clips I recorded. I really don't want to lose my hard work and I need to get this project onto my iPod.

I'm trying to export a file to iTunes (it's about 3 hours long) and I didn't see an option to make a podcast on the new Garageband so I just went ahead so make a regular audio file.
The podcast option has been discontinued in GarageBand 10.0, sorry.
When I clicked on Share and tried to export it to iTunes, it said, "The bounce file exceeds the maximum file size (AIFF 2 GB; WAV 4 GB). Please change the format to CAF or decrease the bounce range.
The CAF option is not available in GarageBand, only in Logic. So this error message is buggy, ignore it.
But the file size limits do apply. If you want to export a 3 hours song, don't export as WAV or AIFF, export in a compressed format. Try to share with medium or low quality:
Or try to share your song in separate sections of less than an hour, that do not exceed the file size limit, if you need the maximal quality.

I need a document saying the serial number and imdi number was replaced with the new iPhone serial number and imel number, i need a document saying the serial number and imdi number was replaced with the new iPhone serial number and imel number

Hi there.
I live in Turkey and i purchesed
IPHONE 5 S withh Serial number DNPLQ1S3FFFM this telephone had a water dammeg. so i ave replaced this phone with iphone 5s Serial F97M80SSFFFM.
also
IPHONE 5 with serial number DNPK51PTDTTR this telephne problem was shuts down randomly, replaced this phone with iphone 5 serial DQGL2030FH1F
In Turkey i need a document for each replacment IPHONE showing the old IMEI number of the old telephone and the new IMEI number the new phone on the same document each replacement telephon.
I NEED THIS DOCUMENT TO REGISTER THE NEW TELEPHONES WITHOUT PAYING ANY FEES AND NOT LOSSING MY RIGT OF REGISTERING.
BEST REGARD.
NEBIL YALCIN.

Then contact whoever replaced the phone for you.
No one here can help you & there is no one from Apple here either.

GTX580 TFII artifacts with the new bios

Hello everyone.
I got a brand new sealed GTX580 TFII as a replacement for my old one that had a problem with one of the 2 fans. My previous card had the old bios installed which gave 1.00mV so the card was not stable. Finally I updated the bios from the MSI website and the voltage increased to 1.025mV so everything was fine.
The new one came with the 1.025mV installed out of the box so I didn't have to do any tweaking. Thing is that it's not stable even with 1.025mV. I constantly get crashes with artifacts in Deus Ex and Battlefield 3 which happen to be DX11 games and therefore more demanding graphics wise.
What do I have to do now?? It's the second time I have problems with this particular card.

Quote from: agelosLX on 31-October-11, 07:46:51
To be honest, I find 1.050mV way too high for such clock speeds (800/1200).
Yea well its not THAT HIGH, 1.100mV and more is high and for overclocking, but 1.050 and even 75 are fine. My stock voltage with this card was 1.038mV as seen in Afterburner and it was crashing on BF3 and Crysis. Right now, I'm testing 1.075mV. So far no crash.

I am having much trouble with the new reminders in IOS7 and how it interacts with Outlook Exchange. Many features lost in the new version.

When I downloaded IOS7, I found that the reminders/task app and how it interacts with Outlook Exchange is much more difficult to use. Some of the issues that I am having are...
1. Trying to edit my task on my phone is not possible, if the notes are lengthy. When you click on the text to edit data near the top, it will scroll to the bottom and not allow you to edit the text because you cant see it.
2. Now all of my task are in one long list. I can not move from day to day like we could in previous version IOS6
3. When I do edit a short task reminder and click done, it crashes and completly goes away. It does save the edit though
4. You can only add task at the bottom of each days reminders. This is very inconvient and much more difficult than IOS6
5. There is a major delay or latency when interacting inside of reminders in this version. Much more than IOS6. It is very unstable and quirky.
I have never seen Apple take a step back with a product until now. I am a huge Apple fan and always will be, so I am hoping they make enhancements to fix these issue. It is a big time prodcutivity killer.
Thanks for any and all help you can give.
Troy Meachum

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

Help with the new Bios 1.56 AND RAM Q

Similar Messages

Maybe you are looking for