Help with the Photos Page?

I posted about this problem a little time ago, but now am not sure what to do.
When I get a photo page up and place by web banner, it is out of sync with all my other pages - and it shows.
I compared it with setting the page up with a blank page and I can see that the problem is that whilst the text box in the blank page will move up and down and adjust individually, the text box in the header on the photo page will not move individually. When I grab the bottom to move it, the whole box moves, instead of up and down.
How can I solve this and what can I do? I would like to use the photo page to display some diagrams that I have and this would make a better job of it than a blank page.
Any ideas anyone? I have come to the end of everything I have tried to do. I did try altering the size, but then I had problems with the navigation bar. The banner was in sync, but then the navigation bar was out with all the rest. I am getting fed up with this.
Help?

Well, I had already taken the navigation bar off display because it was in the wrong place for me, so I created my own instead. I have been back and unchecked the box to include in navigation menu on all the pages and tried the photo page again and it is still slightly out with all the other pages, but just not as much this time.
With the blank pages, you seem to be able to drag the edges of the text box and they will move independently, however, when you try the same thing on the photos page it won't do the same thing. It moves as a whole rather than individually, so that means that the text moves too and once that has happened there is no way to alter that. You can't click the box and move the text up and down. The only way is to move the box.
I like to keep my site looking tidy and with all the pages roughly the same, so this is annoying. I don't have photos, but diagrams and they do look better displayed on a photo page. They are spaced and sized accurately and more so than I can do them myself on a blank page.
Is there any way that you can put the photo template onto a blank page?
No everyone wants to put photos on a website or use photo page banners.

Similar Messages

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

I need help with the numbering pages in a book file

I have a 53 chapter book that which each chapter is its own document. It used to work great. The page numbers of each document used to continue from the last page number of the previous document. That was until today when I opened it and all the page numbers now start at one. I don't know what to do. I have checked all of the options I knew to check. Each document still has the 'automatic page numbering' option selected. I truly don't want to have to go through and manully renumber every document. It will take time I do not have. If I can get somebody's help, it would be wonderful.

Nor do I. It sounds like everything is set correctly. You might want to try creating a new Book file and add the individaul documents into it and see if that fixes things. Also, have you tried updating the numberingfrom the menu since this started?

How do i save a calender i have created with the photo and the dates saved on separate pages?

how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages? when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page. This is causing problems when i print.

Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
I hope this helps!

How do I center objects (photos and animations) so they stay centered with the other page elements?

How do I center objects (photos and animations) so they stay centered with the other page elements?

Geez .. Your class doesn't fulfill the javabean specifications. The properties should not be public.
It should rather look likepublic class TheAddress {
    // Properties ---------------------------------------------------------------------------------
    private String address1;
    private String address2;
    // Constructors -------------------------------------------------------------------------------
    public TheAddress() {
        // Default constructor.
    public TheAddress(String address1, String address2) {
        // Full constructor.
        this.address1 = address1;
        this.address2 = address2;
    // Getters ------------------------------------------------------------------------------------
    public String getAddress1() {
        return address1;
    public String getAddress2() {
        return address2;
    // Setters ------------------------------------------------------------------------------------
    public void setAddress1(String address1) {
        this.address1 = address1;
    public void setAddress2(String address2) {
        this.address2 = address2;
}

All of my photos now have the same photo when I look at them in the viewing area. I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. Help!

All of my photos now have the same photo when I look at them in the viewing area. It makes it look as though all of my photos are the exact same! I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. How can I return it so that I see the photo itself in the preview area? Thank you!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take three or four goes.
Regards
TD

Help with placing photos in Lightroom 4.2

I am making my first book in the Book module and I'm not finding it as flexible as I expected. I'm slowly figuring out some answers to the questions that have arisen, but I'd like some help with the following.
1. Can I add a small photo to the last page above the logo?
2. Can I put a border around a photo on the front, like a frame? Or do I have to prepare a jpg in Photoshop Elements with the frame and my photo?
3. Can I move or resize those yellow-bordered placement boxes, or make a custom layout if none of the layouts are exactly what I want?
Answeres to these questions will take a lot of frustration out of the process. :-)
Thanks,
Nancy

Camera? Is it supported? There is a tutorial here which may help http://www.youtube.com/watch?v=AYs8WbTbJCk

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Hi can you help with the following panic attack report,

hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report:          1
Anonymous UUID:                    7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI          4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav          7.3.0
com.apple.driver.AppleUSBCDC          4.1.15
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AppleHDA          2.1.7f9
com.apple.driver.AppleMikeyDriver          2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics          7.1.8
com.apple.driver.AGPM          100.12.42
com.apple.kext.ATIFramebuffer          7.1.8
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleLPC          1.5.3
com.apple.ATIRadeonX3000          7.1.8
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Brcm4331          513.20.19
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.3.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.1
com.apple.driver.AppleIntelCPUPowerManagement          167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.kext.triggers          1.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.DspFuncLib          2.1.7f9
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.iokit.IOBluetoothSerialManager          4.0.3f12
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.driver.AppleHDAController          2.1.7f9
com.apple.iokit.IOHDAFamily          2.1.7f9
com.apple.iokit.IOAudioFamily          1.8.6fc6
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.ATI6000Controller          7.1.8
com.apple.kext.ATISupport          7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.8
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController          4.0.3f12
com.apple.iokit.IOBluetoothFamily          4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter          1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.3
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.3
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          412.2
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.3
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Help with Skillbuilders Modal Page plug-in

Hi,
I'm an APEX 4.1 user and a novice. I'm trying to use the Skillbuilders Modal Page plug-in. I have a report with an item (Order Number) that I use to drilldown. When the user clicks on the order number link to drilldown, it goes to another page/report that displays the detailed rows for that order (read only). That all works fine. What I'm attempting to do now is display the detail report in a modal page. Similar to the "Modal Page Demo 1" [url http://apex.oracle.com/pls/apex/f?p=46685:MODAL_PAGE:0]here. I watched the [url http://skillbuilders.com/webinars/webinar.cfm/53?title=Introducing%20SkillBuilders%20Modal%20Page%20Plug-in]Skillbuilders webinar twice. The webinar was showing how to display a form in the modal page, but I figured the steps were the same for displaying a report so I followed the steps Dan did for creating a modal page from a link.
Here's what I did:
I inserted: onclick="return false;" class="order-number" in the Link Attributes for the Column Link (drilldown) on my Order Number column.
I then created a Dynamic Action:
Event = Click
Selection Type = jQuery Selector
jQuery Selector = .order-number (I also tried 'a.order-number'. In the webinar it looked like there was an 'a' there.)
no condition
Action = Skillbuilders Modal….
Fire When Event Result Is = True
URL Location = Attribute of Triggering Element
Attribute Name = href
Event Scope = live
The modal page displays when I click on the Order Number link, but only the bottom and right side (with scroll bars) and that's it. There is no detail displayed. Also, the background isn't darkened with the modal page prominent (as demonstrated in the webinar).
Unfortunately my app is not on apex.oracle.com, so I have no link to share. Can anyone please help? I'm at a standstill. If this isn't enough information, I am more than happy to provide whatever else is needed. I can also provide links to screen shots if that will help.
Thanks
David

Hi,
Did you try to change the Theme in the PLUGIN Settings ?
I had the same problem when the Theme of the Plugin was set to Custom. (it is initially set to CUSTOM)
Try to change some to 1 - 5 of them.
Regards
J :D

Photosmart C410: How do I associate a custom paper size with the photo tray?

Our Photosmart 3310 recently broke down and I purchased a C410 to replace it. I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes. With the 3310, I had figured out a way to print the envelopes from the photo tray. While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
One of the reasons I got the C410 was for the photo tray. It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope. Well, unfortunately, that's what I've been doing. I select the photo tray in Word, but the printer goes right ahead and prints from the main tray. I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
My problem is that the software interface for the C410 is different than that for the 3310. I can't figure out how to associate a custom paper size with the photo tray. To test my theory this evening, I told Word that my envelope size was 5 x 7. The printer didn't hesitate to take an envelope from the photo tray. Of course the return address went into a dark void because the envelope is not 5 x 7.
The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets." The C410 only has printing shortcuts.
If anyone can help me, I'll be very grateful! I've probably spent hours trying to get this figured out, and I have no idea what to do.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Problems with the photo app

so recently, a day after updating to IOS 5, i was using my camera to take pictures at an event. i was using the camera from the lock screen and snapping with the up button. well as i was taking pics i would look at the pic, as one normally would. after i took the picture, the photo was perfectly clear no problem i was happy with my photos. about an hour later when i went in to view the pics, my camera roll was all glitchy. When i would scroll up or down there was a huge lag. looking through the albums, there were whole rows of blacked out squares where my pics should be. it looked like the pics had gotten corrupt. the biggest problem is when i clicked a picture to view it, it was super blurry. As i mentioned previously, the pictures were clear. normally you select a picture, and you have that second where the app refines the pictures. My phone/app was no longer refining the pictures so they were just blurry. so i restarted the phone hoping that would fix the problem. nope. i restored it to factory settings nothing.
some other symptoms include, not being able to attach a photo, either to messages, email, or facebook. when i click a photo and delete it, if i select another photo it will display the pic i just deleted. sometimes when i select photos the photo app will just crash and take me back to the home screen. my diagnoses is that my pictures have somehow managed to corrupt the photos app, but i am really not an expert. also if i try to back up my photos, from either iphoto or itunes there are no pictures at all to select.
i have called apple, they are giving me a replacement. but, hopefully this helps other people because i did not see anything out there related to my problem. i hope the next ios update can fix this issue, if it is one.

I apologize for not replying earlier after i went to the apple store. but i will explain what the apple rep did.
first off, i recommend trying several things before you wipe your iphone.
1.The obvious, reboot your phone by holding the home button. If that does not work then...
2. Backup your phone, then do a restore from backup. If that doesn't work then...
3. This is where it gets tricky, my dilemma is that i had taken pictures that i didn't want to lose. Keeping the pictures on my phone was the most important thing to me so i tried a couple different things. In my original post, i mentioned that i could not attach pictures to a message to email them to myself. Otherwise, I would have emailed all 100 pictures to myself, no matter how long it took. There are several Extractor programs out there but they are a bit pricey, in my opinion. The one i used was called "Photo Transfer App". You can find this app on the app store, it costs 2.99, but its an awesome little app. It is worth the money. So if you dont care about anything on your phone, if you dont mind losing all your data, eg. notes, music, or photos, then in the next step you will restore your phone as a new phone. All the above steps were my own way to try to troubleshoot the problem.
So at the apple store heres what they did...
First, I showed the girl all the problems i described above. after doing all the steps above, she was like this looks like a real problem. I told her it happened after i updated to ios 5. she said its not the ios, she has seen it on the iphone 3. but i kind of doubt that, because i have not seen anything like this in any forum. but anyways....
To save my photos she recomended i email them to myself, the Internet at the store was not that quick because
of all the devices connected so she said i should do it from home.
but the steps to email (i did not try this method):
-click photos>click the 'select photos' button (looks like a square with a right facing arrow located at the bottom left corner.)>select any photo you want to email-click share-then select email.
I had explained that i had already backed up my photos so we continued...she asked me several times are you sure you saved everything. She continued to emphasize that all my data would be lost when we restore as a new phone. i said no problem, i can do without the things i have on my phone. keep in mind when we tried to restore from backup i was having the same problems, so we decided the back up was also corrupt and was no longer useful.
To restore as a new phone. the lady said this is one of the cool things on ios 5. i'm not sure if you have to be connected to wifi, but i would think you should be connected just to be safe.
-click settings>general>reset>then click 'erase all content and settings'. this will delete everything. Make sure you select the restore as a new phone.
this has fixed the problem for me, i have not had anymore problems. The apple rep said that she thinks either something dealing with the photos app or one of my photos has corrupted the hardware.

When I select a photo to email from "my pictures" or Picasa, Thunderbird is no longer opening a blank email with the photo attached.

I used to be able to select a photo in my pictures or Picasa, select size, select email, and a blank email would open in Thunderbird with the photo attached. I am wondering if there is a setting somewhere in Thunderbird that should be enabled.
Hope someone can help.
thanks

check Thunderbird is your default mail client. see http://windows.microsoft.com/en-us/windows-vista/change-the-default-e-mail-program

There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.

Absolutely INFURIATING.
I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
Now everytime I try to check out it won't get past page 1 of building the book.
It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
Same problem.
This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Help with the Photos Page?

Similar Messages

Maybe you are looking for