Help with this calc; I can't get it to work...
can someone please tell me what is wrong with this calc script in the attached document? It's the field titled "Total Tips" Thank you so much; I've spent a lot of time on it today. This stuff is new to me. Thanks.
Hi,
Not sure if this is what you are referring to, but I noticed that your event.value is being commented out as it sits on the line above, when I moved your event to a new line it started to work out your calculation.
Is this what you were having troubles with?
Similar Messages
-
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I need help with ISIGHT! I can't get it to work with MSN!
HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOUMicrosoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN. -
Need help with Flash CS4 buttons/can't get buttons to control anything
Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
> -
...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I
..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.
Good day,
How can I help?
Kind regards,
David
Adobe Systems -
Now I've really done it. I need help with iPhoto as I can't get into it at all.
I sent a request earlier regarding my MacBook Pro. I was trying to set up both computers so that I could network, mainly wanted to send my photos from the iMac (running OS X 10.6.8 and iPhoto '08). After some trials I got the two computers so that they appeared to be networked. I set system preferences so that PICTURES was what would be shared between the iMac and the MacBook Pro (running OS X 10.5.8 and iPhoto '11).
I had both computers set to recognize each other, the passwords worked, and I thought that was it until I was ready to move my photos from the iMac to the MacBook Pro. Before I knew what was going on, the MacBook got busy on its own and informed me that it was busy and that iPhotos had to do some updating because the photos (which I then assumed were the ones on the iMac) were too old as they were. It took some time, during which I noticed that when it got to the point of updating faces there were a couple of faces I didn't think I had seen in my MacBook photos. I let it finish what it was doing.
HERE IS MY PROBLEM: When it finally got finished I couldn't see any new photos on the MacBook, so I went to the iMac to see what had been done there. Big surprise! When I went to open iPhotos I got the message "The iPhone Library is locked, on a locked disc, or you do not have permission to make a change to it." No matter what I tried I couldn't get into it, so I don't know whether I have photos any more or not.
As luck would have it, my extended warranty for technical help expired in June 2011!Locked disk issue:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
i have many many crash reports and they all seem different. yet, whenever i search the support pages for help on those crash IDs it shows 0 results. alot of people are having the same problems, and i hope we ALL can get help on this. its getting really frustrating and annoying :(
i doubt it is from skype. i havent used skype in 2 days or so.
here are the crash reports IDs from JUST today..
bp-8c7fab55-79c8-4db1-9527-4ba072111013 10/13/2011 4:51 PM
bp-db6bf6c4-cf34-4eae-a742-105842111013 10/13/2011 4:51 PM
bp-f28611cf-3ff0-4658-a843-05da92111013 10/13/2011 4:32 PM
bp-03fa57ef-580d-4f1d-8fb4-52ac72111013 10/13/2011 4:21 PM
bp-d07e0d82-df2a-41c8-a19b-bb99e2111013 10/13/2011 4:19 PM
bp-fafbd8cf-6769-4b76-8153-c17242111013 10/13/2011 4:06 PM
bp-ee9694ab-585b-4963-8b94-e46432111013 10/13/2011 3:47 PM
bp-773242e1-a87d-4e19-90cb-ce4e52111013 10/13/2011 3:37 PM
bp-6bae0db3-895b-4239-8a71-758ce2111013 10/13/2011 3:36 PM
bp-6dfc1b57-5a8f-4244-baa1-8d0642111013 10/13/2011 3:36 PM
bp-9a6589cd-0e2f-4299-b517-a6c862111013 10/13/2011 3:31 PM -
I updated to Firefox 8.0 for Mac and when ever I try to log on to Facebook I get this error message Textarea Backup] Existing text detected in 'add_comment_text', overwrite with this backup? and then it says yes and gives you the choice of either canceling or ok and it doesn't go away when you click either button...What is going on?
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Help with some questions I can't get answered
Can you give me the specs for P6 re. P7. Does it only go by hours rather than day?
I can't get any answers. I have been on the phone for three day and emailing also and no one has helped me yet.Data is stored at the database level in hours. You can alter the client to display time units as days under Edit>User Preferences... however this simply converts the hours to the specified time unit.
-
Newbie... AMD 64 with K8M Neo-V can't get it to work
I just resently purchased a bundled motherboard and processor from CompUSA, AMD Athlon 64 Processor 2800+ with a MSI K8M Neo-V with VIA K8M800 + 8237 Chipset also puchase (2) 512 DDR400 PC3200 sticks. I'm replacing an old Gigabit motherboard with this one. Installed everything per spec, did not connect any device as of yet, just wanted to make sure the board would boot up with main harddrive first. I'm using the onboard video,went I power the system up I get nothing, no BIOS Setup screens, no video, nothing.... What have I done wrong ???
Any help would be greatly appreicated...hi to all~~
i have just got the same mainboard yesterday, but got a lot of problems since the first install of software.........
i got a whole new unit with the following spec:
MSI K8M Neo-V
AMD Sempron 64-bit 2600+
Kingston 512MB DDR RAM
Maxtor 80GB SATA HD
LiteOn CDRW
and an internal modem
First problem:
after the 1st installation (win98se + all drivers given), the computer showed that the "Programmable interrupt controller" (under device manager) causing a resource conflict (code 15). I tried to change the resource but a window popup and said : "This resource setting cannot be modified" .
Action Taken:
1) format the HD and reinstall win98se. With no driver and any software installed, i checked the device manager and found the "Programmable interrupt controller" still causing a resource conflict.
2) from 1), i installed and updated the chipset controller but got no change..............
3) from 2), installed and updated all drivers, but the problem still there......>_<
Second problem:
After I installed the VGA driver and restart, I tried to adjust the resolution but always come out a "Rundll32" error......
Third problem:
System is unstable. When I copy files from CD drive to HD, after a few minute (copy in process) it will come out the blue screen .....>_<
also sometimes when i restart after installed the drivers, or switch on my computer, the computer will restart just after the windows98 logo dissapear, strange........
help me~~~
thankyou -
Hello and thanks for your help. My name is Lonnie. I am currently receiving unemployment from the state of Indiana. I realize this info is very secure and I am grateful that it is, however, I need to retrieve a message pertaining to my unemployment benefits but there is a green padlock that Is keeping me from retrieving this info. What can I do, if anything? Thanks again, Lonnie
Where is the green padlock?
When this appears in Firefox's address bar, it generally indicates that the site has a special kind of secure certificate that required the site to prove its identity (which is stated in the address bar). This shouldn't block you from using the site, it just indicates that Firefox has a secure connection to the site. -
Help with 11gR2 install (win32) - can't get EM working
Hi, I'm doing a clean install of 11.2.0.2 on a windows XP professional virtual machine. I've gone through this procedure 5 or 6 times now, and keep ending up with the same problem. Here's what I've done so far:
1. Software only install (11.2.0.2)
2. Ran network config assistant to set up LISTENER
3. Run the database configuration assistent to set up a simple database
The DBCA keeps ending up with an error message during the install saying "Error starting database control. Execute the following statements: 1) Set the environment variable ORACLE_UNQNAME to database unique name. 2) c:\oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole
If I do that, the dbconsole still doesn't start. Also I've tried setting the ORACLE_HOME and ORACLE_SID environment variables - they don't seem to work either. When it starts running the emctl.bat, I see the banner info, followed by "the dbconsole is starting...", then it dies with an error 2, saying refer typing net helpmsg 3547 (which is generic)
Am I doing something dumb here? Not very savy on installations, any help would be greatly appreciated. Thinking the dbconsole should come up on a clean install without jumping through a ton of hoops.
Thanks,
ScottPavan, thanks for the link. Actually, for this try around (probably my 5th or 6th over the last two days) it seems to be magically working. The ONLY difference is that I went into the c:\windows\system32\etc\hosts file and specifically added a line for the VM name, i.e.:
Oracle11gR2 192.168.1.2
Do you think that could have made a difference?
Thx,
Scott -
Others have succeeded at this but I can't get it ro work...
Trying to incorporate tinyMCE into Flex 3 I have added the following section
to my applications html file:
<!-- TinyMCE function -->
<script type="text/javascript" src="C:\Users\Scott\Downloads\tinyMCE Install\jscripts\tiny_mce\tiny_mce.js"></script>
<script type="text/javascript">
tinyMCE.init({
mode : "textareas"
Is this correct?
Nothing happens when the button that starts the tinyMCE editor is pressed:
<mx:VBox height="69" width="696" id="vbox_MethodEdit">
<mx:Button label="Zubereitung" click="PrepEdit(event)"/>
<mx:TextArea height="37" width="689" id="taZubereitung"/>
</mx:VBox>
Her's the eventhandler:
// Handles the editing of the preparation section by calling tinyMCE
private function PrepEdit(event:MouseEvent):void {
//Alert.show("PrepEdit: entry point");
var s:String;
if (ExternalInterface.available) {
Alert.show("Wrapper available")
//var wrapperFunction:String = "changeDocumentTitle";
//s = ExternalInterface.call(wrapperFunction,ti1.text);
s = flash.external.ExternalInterface.call("tinyMCE.init");
//s = ExternalInterface.call("tinyMCE.init");
} else {
s = "Wrapper not available";
//Alert.show("Wrapper not available")
// PrepEdit
As you can see I have been doing alot of experimenting around but the editor
does not start. Alert.show("Wrapper available") executes and then all is
still.
Alot of people have entered posts about how easy all of this is to accomplish
but I can't find a single example of exactly how to do it.
Can anyone help?
Thanks,
ScottYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
2011 i7 Macbook Pro with Windows 7 SP1, can't get it to work
2.2 GHz Macbook Pro 2011 17 inch
OCZ Vertex 3
Mac OS X 10.6.8
2nd HD instead of optical drive
I bought a downloadable version of Windows 7 SP1 from Microsoft and burned it to a disk. I have tried probably 25 times to install via Bootcamp, but I always get a black screen with a blinking cursor. I went to an Office Depot in Mexico and bought a hard copy of Windows 7 and still have the same problem.
I have searched and it seems like you can't install Windows 7 on Bootcamp via external drive (have read it on multiple sites, but can't figure out why).
I just upgraded to Lion after reading that you can install a Windows iso on a USB Stick, but after looking on these forums, the FAQ says it will work on only certain models.... My question is, what models? I have tried searching, but have had zero results.your burn is the first issue, common - reduced slowest 2x burn speed
3rd party superdrives also don't work and you need support driver
you need to disconnect the 2nd internal drive also
Maybe you are looking for
-
When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.
-
From which table check 'cost element' and its corresponding GL account?
Hi, May i know from which could i check the cost element field and its corresponding GL account field?? Questions: "the getting cost element should check the corresponding GL account, but I canu2019t find the corresponding table which include these t
-
How do you add another photo album to Iphone 3
How do you add another photo album to iphone 3
-
Line is not usable in ipad air after updating to ios 8.02
After I updated my ios to 8.02 in my ipad air, "line" is no longer usable. The failure symptom is that I can find my friend, but the "chat" function is not usable. I've tried to close the machine and re-start up again also I tried to delete "line" an
-
Why have all photo titles in iPhoto disappeared?
All the image titles I typed in my iPhoto album over the past years have suddenly disappeared and been replaced by image numbers! Does anyone know why this happened or how to restore the titles? This is a disaster!