Help with transferring-windows

I have an original iphone and am getting an iphone 3gs. Is there anyway that I can transfer stuff like my notes and calender? I tried MobileMe but for some reason my itunes and my windows calender will not sync. I also have Microsoft Office Home and Student 2007 and it won't sync with that calender either. Does anyone know a way that I can sync?

With XP, the iPhone supports syncing contacts and calendar events with Outlook 2003 or 2007, or with the address book used by Outlook Express (Windows Contacts) for contacts only.
Contacts and calendar events are included with your iPhone's backup, which is created and updated by iTunes as the first step during the sync process.
http://support.apple.com/kb/HT1766
Sync your original iPhone with iTunes before you connect your 3GS to iTunes the first time. The first time you connect your 3GS to iTunes, you should be prompted to transfer the backup for your original iPhone to your 3GS.

Similar Messages

  • Please help with reinstalling Windows 8 on the U410 touch!

    Hello,
    I've recently dropped my U410 touch laptop from a small height, but it landed unfortunately and the hard drive was running, which eventually lead to its failure. After getting this hard drive replaced, I ordered the recovery disks in order to reinstall the Windows 8 OS on my machine.
    Here is the problem I encountered: the U410 touch does not have a CD drive and thus I cannot insert the recovery disks in the device. I have access to my old laptop and I have been trying for the past few days to connect the two, ( with an Ethernet cable) in order  to be able  to use the CD drive of my old laptop.
    What I have done already: 
    - repaired my hard drive
    - allowed access privileges to everyone on my old laptop CD drive
    -recovered the Lenovo recovery disk for my specific model and Windows OS
    - tried numerous times ( to no avail) to get the cd working for my new laptop
    What I would really appreciate help with:
    - instructions how to connect my old CD drive to my newer laptop
    - launch the recovery sequence from the CD drive of my old laptop
    Any help would be really appreciated,
    I am quite lost with this.
    Thank you, for your time.

    Hi Aerchaos,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear about your situation as there are many issues in this computer and the best available option to get this issue resolved completely is by Calling Technical Support for Assistance to get the information of the nearest Authorized Service Center.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • New user needs help with full windows reinstall/itunes

    ok
    my first time on here so be gentle,
    ok heres my problem, be using itunes for a whilenow with my nano, never had any problems, always just got my mp3's, then just clcked "add folder" in itunes, and then pointed to the said album, and in it goes.
    now my problem is, iam about to do a full reinstall of my win xp, however, 1. i have no idea how to back up my music with itunes., and 2., my actuall musc tracks are all over the hard drive.
    so any help....
    i will add here my idea as to how what think i must do......
    ...i was going to track down all my mp3's on my hard drive, (about 3 gigs worth), and then just copy them over to my .."my music.itunes", folder, and then when i have reinstalled my pc, just copy that back to the "my music" folder....will this work.
    and if it does what will i have to make sure i do on the new install of my itunes, to get my playlists back as they are now....
    i want to avoid thehorror stories i have read were after such reinstalls soon as there ipod plugged in again the blank new itunes updates ipod to blank....(how do i avoid this), and how do i get my new clean itunes to be like it was/is now....
    lots of questons i know, but pretty desprate to get on with my reisntall...
    thaks in advance for ay help.
    toz
    pc Windows XP Pro

    toz,
    We love seeing pro-active thinking here at the Discussions! You're off to a great start!
    And you've pretty well got the right idea of what has to be done. A few points to make things go a bit smoother, though.
    ..i was going to track down all my mp3's on my hard drive, (about 3 gigs worth), and then just copy them over to my .."my music.itunes", folder, and then when i have reinstalled my pc, just copy that back to the "my music" folder....will this work.
    It probably would work but fortunately there's an easier method. Use the iTunes Advanced menu > Consolidate Library... command and iTunes will automatically find all the songs in your music library that are not currently in the iTunes Music folder, make copies of them and then put them into that folder (along with any songs that are already there).
    With that out of the way, there are two main ways to make the back-up copies of your library. The one this article in the Apple Knowledge Base describes in detail is burning CD's/DVD's. That will take care of the music itself but if, as you say, you want to keep your playlists (and the information they depend on) intact, you will also have to make back-up copies of the iTunes Library files . That link tells you where to find them.
    The other approach to creating your back-up is to use any spare hard drive you happen to have available and simply copy the iTunes folder (which happens to contain the iTunes Music folder and the iTunes Library files). Some of our Discussions regulars are quite fond of this method .
    Once you've made your decision and successfully backed up your Library, restoring the music in iTunes onto your newly-formatted hard drive will be fairly straightforward but it will depend on which method you select. So post back and let us know how you're going to proceed as well as any other questions you may have.

  • AS 2 help with new window dimensions

    Hello Everyone,
    I need a little help with AS2 when it comes to doing anything
    other than "drag n drop" scripting. What I'd like to do is open a
    new browser window with specific dimensions but I can't figure it
    out.
    I'm currently opening a new browser window with the following
    AS2
    on (release) {
    stopAllSounds();
    getURL("
    http://scfvideo.com/video_samples/ryan_cat.html",
    "_blank");
    Can someone help me open this window so it's in a 770 pixel
    wide browser window?
    Thank for your help!
    Todd
    High School Web Design Teacher
    www.mrbenrud.com

    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14192&sliceId=1

  • Help with transferring files from Windows to MacBook Pro

    Just got a new MacBook Pro and need to transfer files from a very old Windows operating machine. Have the Seagate Slim portable drive.  I downloaded the online software to format it for the windows files (taking 4 hours).  Now, I'm told it will not work on the Apple product.  Has anyone used this and had success? Or is there an easier way?

    Hello CharliePaints,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Switch Basics: Migrate your Windows files to your Mac
    http://support.apple.com/kb/ht2518
    Transfer information from your PC over your wired or wireless network
    To move files using Migration Assistant to your Mac from your PC, use these steps.
    Have a nice day,
    Mario

  • I need help with transferring my itunes using my ipod

    Hi, I wanted to move itunes to my new computer so backed everything on to my ipod (old 30GB video), did that part fine but now when I transfer to my new computer there is nothing in the itunes folder, and my ipod is still almost full with all the information I transferred, can anyone help? Is it becasue my old somputer was windows xp and this one is vista?
    Thanks

    Open a Windows Explorer window so that it shows the iTunes folder that you dragged from the iPod to the computer (the one that is now on your computer). Run iTunes and select the Music LIBRARY in the sidebar. Drag the iTunes folder and drop it onto the iTunes windows (onto the main pane). iTunes should add the songs to the iTunes library.
    However, you may want to review the article, because it should have worked without doing the above. Make sure you copied the iTunes folder to the correct location on the computer.

  • Help with clean Windows 8.1 install Yoga 2 Pro

    Hey guys,
    I purchased a Yoga 2 Pro about 4 months ago as a secondary computer for college. I've been a Mac user for most of my life, and was intersted in learning more about the Windows ecosystem. While messing around in the partition settings, I must have made a mistake, and deleted a partition. I've been trying to follow this guide from the forums, and have the PBR_DRV partition and a "Drive 0 Unallocated Space", as per the walkthrough, but I'm not able to install Windows 8.1 on the "Unallocated Space" from a flash drive. An error with a different code appears everytime. Could anyone help?
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Guide-Windows-8-1-PRO-RTM-clean-install-o...

    What do you mean by clean install?  Are you simply restoring a backup image of the pre-installed OS, or are you really installing with a new copy of Windows?

  • Need help with popup windows

    Hi,
    (I don't know if this is where I should post this, so if somewhere else is more appropriate, please let me know)
    I'm building a window (might say a popup window). What I need it to do is this. I'm working in the gui. When the user clicks the button "load", it launches this window. In this window, the user selects what they want to load. They can select their option and click load, they can double-click on their option, or they can click "cancel". When any of these three happen (and only then), I want this window to return a value of "long" in accordance with what they selected. (What it returns doesn't really matter). So, basically, it will work almost the same a JOptionPane. (However, I don't want to use JOptionPane).
    However, I can't figure out how to do this. In JOptionPane, the window pops up and doesn't return anything until the user clicks one of the buttons. How can I make it so it won't return anything until the user does one of the three choices I listed above.
    I tried to use wait() and notify() but that didn't work either. (I don't know how to use them). Anyway, I don't know that that's the best way.
    I looked at the source code for JOptionPane and tried to track down how it does it, but I couldn't narrow it down.
    Could anyone please help me?
    (If I need to explain better, let me know).
    Thanks,
    Daniel Lorimer

    Yeah, I converted mine from using JFrame to JDialog and it does what it's supposed to. I didn't realize that JDialog has basically all the same features as JFrame. So, I guess I'll use JDialog for this one.
    However, I was hoping that the solution that I got would work for everything -- Which I don't think it will. JDialog is more like a popup window (which is fine), and JFrame is more like a main window. I want to figure out how to do in JFrame what JDialog does with setModal(). (I think I tracked it down to Dialog.show() -- however, it didn't work when I tried to implement it on my own.)
    Do you know, is there already something like this (for JFrame), or would I have do it on my own?
    Thanks,
    Daniel Lorimer

  • Need help with transferring phone files

    So my girlfriend has an audio file on her phone (a Droid RAZR HD) and she needs to upload it to a computer for a class. Her computer is really bad and so she's using mine, a Mac. I downloaded the Backup Assistant program for Mac and when her phone is plugged in I can drag all the files she needs over to the local content but the transfers always fail. When I click on the transfer log it simply says they failed but it never gives any explanation as to why or how to fix it.
    We've tried going bluetooth connection but I have an iPhone and whenever she searches for bluetooth devices my phone doesn't show up in hers and vice versa. I have plenty of space in my Verizon Cloud to transfer it there but her phone is on her parents plan so I can't really transfer her files to mine. It seems her phone is already linked with a Cloud account that isn't mine.
    What can we do to resolve this issue? Any tips would be greatly appreciated

    Have you tried Looking in here through Motorola's Help Pages,?  If not give this a Look.. b33
    http://www.motorola.com/us/shop-all-mobile-phones-1/Droid-Razr-HD/m-DROID-RAZR-HD.html
    https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,8448/action/auth#/how_do_i

  • Help with installing Windows with a RAID array

    Hi!
    I hope you can help me.   When I try setting up Windows XP Home I can get as far as the press F6 section of the installation. I formatted a floppy disk and installed the Nvidia drivers just as it descibes in the manual.  However, when i'm prompted to add the Nvidia RAID drivers I get the message "The file nvraid.sys could not be found." and if I try to install the Nvidia storage control drivers I get the message "nvatabus.sys could not be found.  IF I use the nforce3 SATA RAID Driver floppy provided by MSI I actually get all the way through the formatting of the hard drive but when i'm promted to press enter to start loading the Nvidia drivers into Windows it stops and will not go any further.    
    I have checked the the BIOS settings and double checked the BIOS settings.  At first, I tried installing with the hard drives installed in ports #1 and #2.  I have tried connecting the two sata 120GB Maxtors to sata ports 3 and 4.  
    Under Integrated Peripherals, Enable RAID for SATA #3 and #4, disable port 1+2, and enable port 3+4 and vice versa for the previous setup.
    I would then save changes and restart and at the nVidia RAID BIOS screen where it would usually say to press F10 to check the array setup.
    I am frustrated and stumped.  Please help me...Your help is much appreciated, thank you
    System:
    K8N Neo Platinum
    Athlon 64 3400+
    1024MB Corsair XMS ProLL PC3200
    2 x 120GB Maxtor SATA hard drives
    Lite-on 52x24x52
    ASUS 9800 Pro
    Antec 480 watt PSU

    Maybe you have not put the files in the correct directories needed to install the files from the floppy, or maybe your floppy is just messed up Why not just use the floppy that is supplied to you by MSI? (Psst its in the box )

  • Please help with minidump - Windows 7 64 bit

    Hi,
    I recently reinstalled Windows 7 and since reinstalling, I've been having a problem with BSODs when running Freemake Video Converter which was working flawlessly before the reinstallation.  No hardware changes have been made, nor any BIOS changes.
    I was getting various different BSOD messages and they seemed to point to Kaspersky 2013 so I uninstalled that, ran Kaspersky's uninstallation tool but still kept getting BSODs when running Freemake.
    So I formatted and reinstalled Windows 7 64bit again and installed MSE instead of Kaspersky. 
    I am still getting BSODs using Freemake though and it looks like a driver problem but that's as far as I can guess!
    My system consists of an Intel 2600k, 16GB RAM, Ati HD5450 VGA, 250GB Samsung 840 Pro SSD, Asrock Z68Extreme7 motherboard, various SATA storage drives, Pioneer DB-206K Blu-ray writer.
    Could someone please help?  I have installed Windows Debug and here is my latest minidump:
    Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\Minidump\030414-9313-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: srv*c:\windows\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    Machine Name:
    Kernel base = 0xfffff800`02a4c000 PsLoadedModuleList = 0xfffff800`02c91e90
    Debug session time: Tue Mar  4 02:26:40.038 2014 (UTC + 0:00)
    System Uptime: 0 days 0:09:52.787
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck 3B, {c0000005, fffff80002ae88a4, fffff880072ffd00, 0}
    Probably caused by : Unknown_Image ( nt!KeReleaseSemaphore+1e4 )
    Followup: MachineOwner
    1: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000005, Exception code that caused the bugcheck
    Arg2: fffff80002ae88a4, Address of the instruction which caused the bugcheck
    Arg3: fffff880072ffd00, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    nt!KeReleaseSemaphore+1e4
    fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh]
    CONTEXT:  fffff880072ffd00 -- (.cxr 0xfffff880072ffd00)
    rax=0000000000000037 rbx=fffffa8010760580 rcx=fffffa8010760620
    rdx=0000000000000000 rsi=0a1001c9ea0fd64d rdi=0000000000000000
    rip=fffff80002ae88a4 rsp=fffff880073006e0 rbp=fffffa8010760688
     r8=0000000000000000  r9=0000000000000000 r10=0000000000000000
    r11=fffff8a00a3e3130 r12=0000000000000001 r13=fffff880009ec180
    r14=fffff880009b3101 r15=fffffa8010760948
    iopl=0         nv up ei pl nz na po cy
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010207
    nt!KeReleaseSemaphore+0x1e4:
    fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh] ds:002b:0a1001c9`ea0fd678=??
    Resetting default scope
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  FreemakeVC.exe
    CURRENT_IRQL:  2
    LAST_CONTROL_TRANSFER:  from fffff80002dd7d60 to fffff80002ae88a4
    STACK_TEXT:  
    fffff880`073006e0 fffff800`02dd7d60 : fffffa80`00000000 fffff8a0`00000001 00000000`00000000 fffff8a0`0a3e3000 : nt!KeReleaseSemaphore+0x1e4
    fffff880`07300760 fffff800`02dd954e : 00000000`00000000 00000000`00000000 03030303`00000000 00000000`00000000 : nt!AlpcpCompleteDispatchMessage+0xa10
    fffff880`073007f0 fffff800`02dd6e4f : 00000000`00010002 fffff8a0`024ae648 00000000`00000000 00000000`00000000 : nt!AlpcpDispatchNewMessage+0x24e
    fffff880`07300850 fffff800`02da1d53 : 00000000`00000030 00000000`00000000 00000000`00000000 fffffa80`0f137900 : nt!AlpcpSendMessage+0x4ad
    fffff880`07300950 fffff800`02da2465 : fffff880`00000000 00000000`051fe600 fffffa80`0f137900 00000000`00000000 : nt!PspExitThread+0x223
    fffff880`07300a50 fffff800`02da2575 : fffffa80`0f137990 00000000`00000000 fffffa80`0f137990 00000000`7ef01000 : nt!PspTerminateThreadByPointer+0x4d
    fffff880`07300aa0 fffff800`02acb8d3 : 00000000`00000000 fffff880`07300b60 00000000`7ef01000 00000000`00000000 : nt!NtTerminateThread+0x45
    fffff880`07300ae0 00000000`76e2184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`051fe668 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76e2184a
    FOLLOWUP_IP:
    nt!KeReleaseSemaphore+1e4
    fffff800`02ae88a4 0fb6462b        movzx   eax,byte ptr [rsi+2Bh]
    SYMBOL_STACK_INDEX:  0
    SYMBOL_NAME:  nt!KeReleaseSemaphore+1e4
    FOLLOWUP_NAME:  MachineOwner
    IMAGE_NAME:  Unknown_Image
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    STACK_COMMAND:  .cxr 0xfffff880072ffd00 ; kb
    BUCKET_ID:  INVALID_KERNEL_CONTEXT
    MODULE_NAME: Unknown_Module
    Followup: MachineOwner

    Lemental2
    Both of these were inconclusive and were different error codes (BCC).  Though Freemake was the active process I think there is an underlying issue.  Please run driver verifier as instructed in this wiki.  It will give a much better chance
    of "catching" the mis-behaving driver.
    Please run this test to find which driver is causing the problem.  
    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
    know what it is you probably are not overclocking.
    Driver verifier (for complete directions see our wiki here)
    Co-Authored by  JMH3143
    Wanikiya and Dyami--Team Zigzag

  • Need help with loading Windows 7 onto Macbook Pro - Bootcamp and parallels

    Hi,
    I have a windows PC and changing over to a Mac. I purchased today Parallels and Microsoft Office for Mac in order to use them on the MacBook.
    Also please note - I need to use Bootcamp for some programs that I need to use - and then also be able to use parallels.
    Where I am up to at the moment is - since there is no disc drive on the laptop where I can insert the disc - I have gone onto my PC and downloaded the Windows 7  usb/dvd download tool setup - however I dont know where I find the ISO file for Windows 7? So if someone could help me with that.
    Alternatively - can someone please let me know if I can just pay and download Window 7 for Mac - and then run it through boot camp etc. If someone can please give me some advice on this - and also a handy step by step guide on how to achieve it.
    Thank you so much in advance for your help!!!! I really appreciate it!
    K

    Thanks Clinton  - When I went into Apple store today, I told him about the programs my husband needs to use for a CBUS course. The guy there said his room mate has done the same thing and cannot use parallels for the programs they need to run (it doesnt seem to work properly) so he is using boot camp to run them and it works fine. So I am wanting to run Boot camp first and then once the course is finished run everything through parallels. 
    So I have gone into Boot Camp - and because there is no Disc drive I cannot insert the disc - so I have gone back onto the PC to put windows onto a USB to then use with Bootcamp. I just cannot find the ISO file path for Windows.
    I hope this all makes sense!
    I am thinking I maybe i will buy the windows ISO file instead of trying to hunt it down on the PC. Do you think this is the best way to do it?

  • Help with Lightrooom/Windows 8

    I just upgraded my computer to Windows 8, reinstalled Lightroom 4, and every time I go into the Develop Mode, Lightroom gives me an error and it shuts down.  I get the 'Adobe Photoshop Lightroom 64-bit has stopped working.  A problem caused the program to stop working correctly.  Windows will notify me...etc...any help would be terrific!!

    What do you mean by clean install?  Are you simply restoring a backup image of the pre-installed OS, or are you really installing with a new copy of Windows?

  • Help with encoding windows media file

    Hello, I have recently stared using After effects to edit some movies.  Basically I am importing some .wmv videos (with sound), adding some visual effects to them and and want to export them just like they were but with the effects.  After that I will then want to copy the videos to an external hard drive and be able to connect it to a Sony blu ray player and watch them on the tv.  The entire process works fine with the videos before all the editing happens.  But something happens to the audio.  It plays fine on the PC but when I play it through the blu ray player, there is no sound and it says it is"this audio type is not supported."
    My best guess is that it looks like AE wants to encode the audio with Windows Media Audio 10 Professional by default and it's possible that the bluray player can't play that. Does this sound right to you?
    I know you can choose Windows Media Audio 9 and 9.2. for the output but 9 played back in slow motion sound and I'm currently waiting for 9.2 to export.
    Any advice for using another codec like AVI or FLV?  Or maybe something else?
    Thanks so much for any help!!!!
    Cheers,
    Aaron

    I suggest exporting your files through Adobe Media Encoder (AME). It has Blu-ray encoding presets, as well as handling WMV encoding better than After Effects.
    Here is the AME forum:
    https://forums.adobe.com/community/ame

  • OpenAM on Windows - Need help with the Windows Desktop SSO [Video Inside]

    Hi everybody,
    first sorry if I make some mistakes as I dont speak english fluently, sorry :)
    I am trying to configure the Windows Desktop SSO of OpenAM on a Windows box.
    I followed this tutorial : http://docs.oracle.com/cd/E19681-01/820-3746/gisxh/index.html but when I check if SSO works (with this URL : http://FQDN_domain.llocal:8080/opensso/UI/Login?module=MySSOModule) , it fails with an error "authentication failed".
    1. First I would like to know if there is a way to check if the keytab generated is correct please. Indeed, I have read somewhere that the account name has to be identical as the name of the SSOServer; in my case it is not.
    I have correctly generated the keytab file (*or I think so but how can I be sure* ?).
    2. I would like to know how, in Windows, I have to configure the "keytab file name" (on the module instance page/ New Module).
    As I dont have /etc/opt etc... Do I have to specify a path like that ? : "D:\apache-tomcat-6.0.33\webapps\opensso\config\myfile.HTTP.keytab"
    3. I have also logfiles with debug mode enabled. It is available here : http://dl.free.fr/b6yPOoYTU/logauthent.txt.
    I will be very pleased if someone can help me about this problem that drives me nuts.
    Thanks a lot
    Edited by: 899066 on 24 nov. 2011 09:12
    Edited by: 899066 on 25 nov. 2011 08:42

    I have added a video of my configuration; if you see something "strange"
    You can watch it here : http://www.youtube.com/watch?v=UooRDIGm_4c
    Edited by: 899066 on 25 nov. 2011 08:43

Maybe you are looking for

  • Trying to add a webpart to webpart page erroring

    I have a webpart which internally calls a webservice. When i try to add it to a webpart page i get below error. An error occurred while attempting to add the gallery item [Miscellaneous] AProject to the page. The error was: Microsoft.SharePoint.WebPa

  • Just Finished my MartinFields Application!!

    It was the worst 30mins in my life, but in the end it looks perfect, 1 bubble on the centre switch and 1 by the corner, both minor and both don't get in the way of using and watching it, the one problem i have had is with the click wheel, it's on at

  • Is Airport Wireless printing possible with Officejet 4315

    I am thinking of getting one of these Officejet 4315s. I'll be using it as a regular sheet feed fax, wireless not necessary, but will need wireless printing. On IFelix's Unofficial printer compatibility list with AEBS and AX, the Officejet 4215 is li

  • Macbook Pro Won't Boot After Starting Lion Install

    2008 Macbook Pro 17" with Core 2 Dou processor. Internal Disk has two Partitions Downloaded Lion from App store and ran installer. Selected 2nd partition which is Mac OS Extended Journaled. (I was intending to do a clean install on this empty partiti

  • Cannot activitate adobe premiere elements 10

    i have been for the last 3 hours trying to reach somebody OMG! On hold for 1 1/2 hour nothing!!!  your help on the internet is not helping me.  I finally double clicked and received this window i am typing ON. My computer crashed and I restore the co