Help with transmission times over a 2 gig link.

We are getting 2 GE links that we can etherchannel together between to sites that are across the state from each other. We need to transfer up to 55 terabytes across this link on a one time basis, and the normal latency of the gig link is 8ms.
These two gig ethernet links will be connected to Gig ports on SPA-2X1GE modules on a 7600-SIP-400 blade in a 7604 router at both ends.
Approximately how long will it take to move 55 terabytes across this 2 gig etherchannel? Can it be done over a weekend?

Hi,
One can do the math in various ways, but please consider, if there is a single host sending the data, only a single link will be used. This is because even with etherchannel, to prevent out-of-order packet arrival, one flow sticks to one link all the time.

Similar Messages

  • Need help with new Time Capsule/Airport express setup!

    I just hooked up a 500g time capsule to replace an airport extreme, and now my airport utility on my MacbookPro Retina no longer recognizes the airport expresses I had on my network for airplay purposes.  Can anyone help with this issue?

    Instead of a switch you need a wireless router, because your modem will only assign one public ip address to the switch and that ip address will be forwarded to any one computer at a given time...You should replace the switch with a wireless router and it should resolve your concern...

  • Help with quick time video on iphone

    Received e-mail on iphone with quick time video.Will not play.Do I need to donload quick time on iphone or is there a app for that????

    Import it into iTunes and create an iPhone version. In iTunes highlight the video, then Advanced>Create and iPod or iPhone Version.  Sync this version to your phone.

  • Need help with Creative Zen: Vision M 60 gig vers

    I have?a somewhat?complicated problem. I went to the store set on buying the largest possible storage space, that was not an Ipod. The salesman told me that the 60 gig version was not available at all where I li've (Norway). I believed him and, somewhat disappointed,?bought the 30 gig version instead (It didn't have enough?space for everything I intended to put on it). I went home, installed the program, inserted the player?and everything worked fine. It recharged normally, the media explorer could locate the player and I could transfer files back and forth. Then I went to my buddy's place, whose?50 gig, perfectly organized?music collection was my main reason for buying this thing. I wanted to copy his whole collection, but since I only had a measly 30 gigs, I only copied what I viewed as most essential. I was reasonably happy with my purchase. Imagine my surprise then when I browsed the Creative homepage and saw that you could have the 60 gig?Vision M shipped to Norway for only a meager increase in cost over what I had paid at the store. I cursed the?sleazy?swindler of a salesman, who?was probably trying to empty?his stocks,?and promptly went back to the store and traded in my 30gig for an imported 60gig?(I didn't have the balls to denounce the salesman, unfortunately). I received?my new gadget?a few days later. I was a little curious about whether my already installed Media Explorer would work with the new player, but it seemed to work fine without having to reinstall the program included in the new package. Not so on my buddy's computer. When I inserted the player in his USB dri've, the computer recognized it's(a notice popped up asking me what to do next time the player was inserted) but the Media Explorer did not. "Your player is not connected". Ah well. I brought out the CD and reinstalled the Media Explorer. Still nothing. I reinstalled everything that was on the CD. Nope, still can't find it. What?to do? I want that?music!!

    Press and hold the Menu/Back button to return to the main menu. The two buttons to the side of the touchpad are Previous/Rewind and Next/Fast.
    Cat

  • Need help with Modbus RTU over TCP communication

    Hello!
    I'm working with a project that involves communication between a LabView PC, a cRIO-9073 and a few Crouzet PLC's with XN05 modbus extentions. The issue I'm having is to get a stable and reliable connection between the units. The cRIO is communicating with the PLC's by Modbus RTU over TCP and I've created code that read and write to them in a sequential order to avoid possible ModBus conflicts. The LabView PC is sending a "ping" (boolean true) every second to the cRIO over UDP and the cRIO is then sending the "ping" to the PLC over Modbus/TCP. The PLC has a timer that waits for pings, if no ping has been recieved in 7 seconds the emergency brakes are applied and the system shuts down.
    The main problems right now is:
    * After a while I lose the connection between the LabView PC and the cRIO. "Connection with RealTime target cRIO-9073 has been lost".
     - I also get either error code 56 or 66 on the TCP link.
    * The second problem is that if I quickly pull a TP-cable from, let's say, a PLC and then directly plug it back in I want the TCP connection to quickly reestablish. However what happens is that the "pings" from the cRIO stops coming to the PLC for like 5-6 seconds (time to reestablish link?), which means the 7 second timer is almost full. One option would be to raise that timer value, but the drawback is that the system will take longer time to respond to an true error which could be bad.. My question is simply, does it really take 5-6 seconds to establish a TCP connection between a cRIO and a PLC? What affects the time? 
    I would greatly appreciate help or respons on this one. I attach a simplified version of the code I use (all variables and such has been replaced with constants). 
    Is this a good way to do a ModBus communication over TCP with 3 PLC's?  Is there a better, safer, more reliable way? All suggestions on improvment is appreciated
    Thanks!
    /J
    Attachments:
    MB_TCP.vi ‏29 KB
    MB_PLC.vi ‏28 KB

    Dear J,
    Check the state machine Architecture here.
    1. In your acquisition if you got error in any system you close all TCP connections that is not right your other systems are working fine.
    2. You go with parallel loop connection. For each PLC you run separate code with error handlers.
    3. Check the attached VI for TCP Read. Same VI you can modify and use for your ModBUS operations.
    4. In you Sub VI you are passing a constant cluster. I am not able to understand what is the use of case structure inside the subVI, In you code you are passing the constant so its always same.
    As you done previously made 3 loops or VIs to read the data in a main VI. First try to made one VI with one PLC, remove your all bugs and errors and copy it 3-time with different-different configurations.
    Thanks and Regards
    Himanshu Goyal | LabVIEW Engineer- Power System Automation
    Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
    It Only gets BETTER!!!
    Attachments:
    Tcp Host.vi ‏28 KB

  • Need help with moving sight over to Iweb

    I would like to start using IWeb but I already have a website built that I used Frontpage to create. I want to make some changes to the sight so if I cannot convert some of the things I have, Im ok with adapting!
    www.DarnGoodSeasoning.com
    1st question: (Visit site above) if you hover over the links on the left they turn green Can I do that in Iweb? I figured out how to do it with font but not pictures. I have the .gif of each in yellow and green.
    2nd When I have created pages in the past www.HeyRobi.com It changes the name in the address bar to http://heyrobi.com/Mac/HeyRobi.html Call me petty but I want it to say HeyRobi.com can I fix that?
    Thanks in advance for any help or tips. If there is any advice or tips how to improve the Darn Good site I am always up for constructive criticism. BTW I am dropping the frames!
    TIA HeyRobi

    Welcome to the Apple Discussions. 1 - The rollover options are only available for text, not images.
    2 - To get must HeyRobbi.com to show in the URL window you'll need to use standard domain name forwarding with masking. Then every page of your site will display only that. The downside to that is visitors will be able to only bookmark the first or entry page of your site. That may or may not be a problem for you. My tutorial site, toadstutorials.info, is setup with masking.
    The following is a screenshot of how I setup my site with GoDaddy.com for forwarding and masking. Although every domain name provider is different your's will have a similar setup for you to set the masking for your domain name.
    Click to view full size
    OT

  • Making a Quiz in Flash. Need help with input time

    Hi Flash Community,
    I'm making currently a quiz using Flash Pro CS5. What I want to implent is a time bar which will load once the bar is loaded it will go to the next frame.
    So what I need is first a timer which will start immediately when the user sees the question and I need a time bar which will indicate how far the timing is. So let's say you have 30 seconds to answer the quiz. When the timer is at 15 seconds the bar will be at half.
    Something like this http://www.google.nl/imgres?imgurl=http://theportablegamer.com/wp-content/uploads/2009/10/ question.jpg&imgrefurl=http://theportablegamer.com/tag/quizquizquiz/&usg=__xsykgRnehmB9P97 gg3W9tAx2Dfg=&h=320&w=480&sz=57&hl=nl&start=0&sig2=tdKlW2Iv6zHo3THsHwdVpQ&zoom=1&tbnid=ToM bL22o-D7BOM:&tbnh=107&tbnw=160&ei=aiz7TcGONI2gOpic0b4E&prev=/search%3Fq%3Dquiz%2Binterface %26um%3D1%26hl%3Dnl%26sa%3DN%26biw%3D1902%26bih%3D909%26tbm%3Disch&um=1&itbs=1&iact=rc&dur =317&page=1&ndsp=68&ved=1t:429,r:13,s:0&tx=100&ty=47
    Could anyone help me with this? How do I need to do this?
    Thanks!

    Create a movieclip with tween about 30 frames and actions stop() in the first frame
    AS3 code:
    import flash.utils.Timer;
    var timer:Timer=new Timer(1000);
    timer.addEventListener(TimerEvent.TIMER,fn);
    timer.start();
    function fn(e:TimerEvent):void{
        trace(mc.currentFrame);
        if (mc.currentFrame==30){
            timer.removeEventListener(TimerEvent.TIMER,fn);
        mc.gotoAndStop(mc.currentFrame+1);
    AS2 code:
    var n=setInterval(mcfn,1000);
    function mcfn(){
        trace(mc._currentframe);
        if (mc._currentframe==30){
            clearInterval();
        mc.gotoAndStop(mc._currentframe+1);

  • Please help with first time PC build

    As a guy coming from a 8 year old 3,1 MacPro into PCs I need a bit of help evaluating all the different combinations when it comes to building a PC.
    I'm woking in CC mainly with After Effects and Premiere. In AE I'm working with Element 3D/optical flares, getting into some C4D.
    Premiere mainly with HD and Blackmagic cinema dng & prores. Working with some 4k Red footage. Additional CC applications but After Effects and Premiere are the main concern. Also, hoping to use Resolve, but haven't.
    I'm not going to be building it myself, there is a computer place that will be assembling and this was their suggested build with parts that they usually use with workstations along with some of my input from looking online. I think the vast amount of work they do is for gamers, and since I won't be gaming at all I want to make sure this is a solid work machine.
    Motherboard : 2011-v3 : ATX : X99S SLI PLUS : MSI
    CPU : Intel Core i7 5820K (6 x 4.0 GHz Overclock, 12 x threads)
    Case : ATX : No PSU : P70 Silence (Black) : Antec
    PSU : 750W : Smart Standard 80 Plus : SP-750PCBUS : Thermaltake
    RAM : Desktop DDR4 : 16GB/Kit : PC4-17000 : Crucial
    Cooling : CPU : Liquid : 120mm : Kuhler H2O 650 : KuhlerH2O650 : Antec
    Video Card : PCI-E : NVIDIA : GTX 970 : 4GB : ZT-90101-10P : Zotac
    HD : SSD : 250GB : SATA3 : Samsung 850 EVO (OS, Programs)
    HD : HDD : 2TB : SATA : WD2003FZEX Black : Western Digital (media, projects)
    HD : SSD : 500GB : SATA3 : BX100 Series : CT500BX100SSD1 : Crucial (media cache, previews, exports)
    I have a couple of 500GB 7200 seagate drives that were in my mac pro that I will probably bring over to keep photos, documents and other personal stuff.
    I have a 3TB caldigit vr raid that I'm thinking I can connect to the pc via esata
    As a potential extra I'm considering a 4TB backup drive where I can copy everything over incase of a drive failure.
    I appreciate any input, thanks

    Thanks,
    I've been reconsidering my build in light of what you said and I'm hoping you could look it over.
    PSU - EVGA SuperNOVA 850 - $174.99
    CASE - Fractal Design Define R5 - $139.99
    I'm still not sure about cooling. The R5 has 2 fans included, on on the back and one of the front. Is that enough or do I need another?
    CPU cooler - From what I understand I will still need a fan on the CPU and I've seen the Noctua NH-D15 and Cooler Master Hyper 212 EVO on other forums. Thoughts?
    I have no experience over clocking so I'm thinking I will just leave the CPU as is.  Correct me if I'm wrong but I've heard the 5820 is a better price/performance value than the 5930 so I'm thinking it's worth it to save the $250. Unless this CPU only makes sense if you OC
    CPU - i7-5820K Haswell-E 6-Core 3.3GHz- $469.99
    Motherboard - Asus 99-A - $334.99
    Originally I had the regular Crucial Ram picked out but It looks like the Crucial Ballistix Sport has a higher speed and is on sale for basically the same price. Latency is 15 for the regular and 16 for the ballistix? Is that the right call?
    RAM - Crucial 32GB (4x8GB) DDR4 2133 PC4-17000 - $449.99
    OR
    RAM - Crucial Ballistix Sport 32GB (4x8GB) DDR4 2400 PC4-19200  - $439.99
    Video Card - GIGABYTE GV-N970G1 Gaming-4GD GTX 970 - $449.99
    System Drive - Samsung 850 Pro 256GB - $194.99  2 of these one for system and another for media cache, previews, and exports.
    Am I forgetting anything?
    Thanks for taking a look

  • Help with a timer?

    Here's what I want to do:
    When the mouse is pressed (on mouseDown), set sprite.BlendLevel to a value (I know how to do this).
    When the mouse is lifted, begin a timer. If the mouse has not been pressed after 30 seconds, the sprite.BlendLevel value changes.
    (I want this timer to reset every time the mouse enters a mouseUp state. HOWEVER, it should not reset every frame update - ONLY when the mouse is first lifted.)
    Basically, I'm making it so a touch screen app fades if it hasn't been touched for 30 seconds (with just one big sprite overlaying it at varying blend levels). That's all.
    I can't wrap my mind around timers, so that's why I'm having problems with figuring this out.
    Thanks for any help you can offer. I truly appreciate it. I feel like there aren't enough people out there working with Director anymore, so finding help like this is valuable.

    Type this in your Message window, and then press Enter:
    go movie "http://nonlinear.openspark.com/tips/sprites/TimerFade.dir"
    Is that the sort of thing that you are looking for? It's currently set to trigger after 5 seconds, but you could use...
      the timeOutLength = 1800
    ... in line 13 of the Fade Behavior, to make it wait 30 seconds (1800 = 30 seconds * 60 ticks/second) before it triggers.

  • Help with incrementing time (in excel)

    Hi!
    I need to find the difference between a start time and end time, calculate how much time has elapsed and divide that time period by a variable number of workers. (I have gotten that far with the formulas).
    Then I need to take the resulting minutes in that time period per worker, and add it to the start time, and that is where I could use some help!
    For an example, if the start time is 5:30 pm, and the end time is 6:00 pm, and I have 5 workers, I will get the amount of time per worker as 6 minutes.  How would I create a formula to add the amount of time per worker back to the original start
    time so that I can get a result of 5:36 PM?  

    Hi!
    I need to find the difference between a start time and end time, calculate how much time has elapsed and divide that time period by a variable number of workers. (I have gotten that far with the formulas).
    Then I need to take the resulting minutes in that time period per worker, and add it to the start time, and that is where I could use some help!
    For an example, if the start time is 5:30 pm, and the end time is 6:00 pm, and I have 5 workers, I will get the amount of time per worker as 6 minutes.  How would I create a formula to add the amount of time per worker back to the original start
    time so that I can get a result of 5:36 PM?  
    1. In cell A2 I have:-
    17:30:00
    2. In cell B2 I have:-
    18:00:00
    3. In cell C2 I have:-
    =(B2-A2)
    This displays a result of:-
    00:30:00
    4. In cell D2 I have:-
    5
    5. In cell E2 I have:-
    =(C2/D2)
    This displays a result of:-
    00:06:00
    6. In cell F2 I have:-
    =(A2+E2)
    This displays a result of:-
    17:36:00
    Does that give you what you want?
    The information above is in European time system (what Americans call, "military" time).
    If you are in the US just input the times in the formats that you would normally do and you should get the same results as I do except in AM / PM format.

  • Help with PC- Time Capsule direct ethernet connection

    First let me say that PCs are a total mystery to me - I am a Mac person all the way. That being said, I do own a PC for the occasional situation where I can't do what I need to do on a Mac (something that is happening less and less these days).
    I just got a TIme Capsule that I configured through my MacBook and which is working fine. I am trying to hook up my PC (which does not have wireless capability) via a direct ethernet connection. The PC seems to recognize that it's on a local network, but cannot connect to the Internet. I have tried going through the various network configuration wizards on the PC and nothing seems to be what I need. Help has been useless. Can anyone help give me some hints about what I need to do to get the PC to recognize that there is an Internet on the other side of the Time Capsule connection?

    I am still interested, thanks! Just couldn't get to things during the week. I am running WIndows XP Home Edition. I have to ask you to spell out things a little bit more. To start with setting DHCP - I am not sure how to do that. I tried using Help and it gives me nothing useful.
    When I run Network Connections I see a Local Area Connection listed. Type: LAN or High-Speed Internet. Status: Connected: Device Name: Broadcom 440x 10/100 Integrated Controller. Phone # or Host Address: <blank> Owner: System.
    Double click it, get Status: Connected, Duration: <counting up> Speed: 100.0 Mbps.
    Under Support, Connection Status, everything is blank (Address Type, IP Address, Subnet Mask, Default Gateway). This does not seem good. But I am not allowed to enter anything on this screen. If I click Repair, it says "Window could not finish repairing the problem because the following action cannot be completed: Failed to query TCP/IP settings of the connection. Cannot proceed. For assistance, contact the person who manages your network. (LOL - that would be me)"
    There's a control panel for the Broadcom Advanced Control Suite. The IP Address is 192.168.0.101. I don't see anything there about DHCP or TCP/IP.
    There's an "Internet Options" controller, where I found an Internet Connections Wizard, but that doesn't seem to do it. I say I want to connect to the internet using an ethernet connection, and then it says "Your broadband connectiion should already be configured and ready to use. If your connection is not working properly, click the following link. (Which is "Learn more about broadband connections"). This is a help page that sends me back to Network Connections (where I started).
    Nowhere have a found a place to set DHCP or addresses.
    Please, if you can, tell me where to look to adjust these settings. Thanks very much for your help.

  • Help with Quick Time on Iweb

    I'm wondering if someone will be able to help me. I'm new to iWeb and published an iMovie. When I publish to iWeb, the only thing that appears is the Quick Time logo. I'm sure that I must have done something wrong but I don't know what it is. The link is below.
    http://web.mac.com/conniefitzgerald1/iWeb/Site/Lu%20and%20Ron1.html
    Any suggestions would be greatly appreciated.

    I checked out your movie and it's already quite small. Making it much smaller is going to hurt quality. What we need to do is have it Fast Start at least so that people waiting for it to download will be able to see a part of it.
    Try the QuickTime export
    File -> Export
    Choose QuickTime
    Choose Web
    Click Share
    (save it to your desktop so it'll be easy to find for the next step).
    Then open iWeb and find that movie page, delete the movie that's there and replace it with the one you just exported. Post back once it's up and I'll take another look.
    (It should be just as straightforward as you think it should be, but the iWeb export has been found to be lacking as far as not being able to resize for widescreen video, so maybe it's not setting Fast Start as well).
    EDIT: And, just as I test a widescreen movie, it exports to iWeb just fine!

  • Any help with a Time Capsule install and Mac Mini server screen share?

    Installed a Time Capsule, now I can't access my mac mini server.  I see the files/folders, but cannot screen share with the mini from my macbook pro.  Any help?  Error below when trying to use the "screen share" button in Finder.  Macbook Pro and Mac Mini are using Mountain Lion 10.8.2.
    Connection Failed Error: Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure your network connection is working properly.
    Please help, I'm really stuck on this one!

    Try removing the TC and see if the problem disappears.
    Screen Sharing has a checkered histroy looking back through the posts..
    https://discussions.apple.com/message/16026896#16026896
    There are many discussions about failing after changes in Lion.. I haven't seen the equivalent ML yet.. the TC may not be root cause, just the initiator of the problem.
    It could be the BTMM associated with the TC.
    https://discussions.apple.com/thread/4160415?start=0&tstart=0

  • I need help with this Time Capsule and External HD problem!

    my time capsule is working perfectly and i decided to hook up a seagate 500 external hd thru the usb on the back of the time capsule!
    well i can see both drives on my macbook and i can transfer files from my mac to both hd with a breeze
    one major problem i cannot extract files from my external hd only put files in! i tried checking the setting and everything but with no avail! anyone have this problem and how did they fix it? thank you!
    Message was edited by: aphextwin007

    Try connecting another USB storage device to the TC - HDD or memory stick. Format the device while it's connected to the TC, then try writing and reading to it.
    It does seem very odd that you can write to the HDD but not read from it. Presumably when you copy files to it they appear in Finder - you can see them OK? Do they appear to be the right size ("get info", or click in "columns" view). What exactly happens if you try to drag them back to the desktop?
    I can only think that you may have a hardware or formatting problem, hence trying a different, freshly formatted, drive.

  • Requesting help with a time/date synchronization problem--thanks

    I'm having a bear of a time trying to get my desktop outlook to synchronize with my 8820 blackberry. Running XP and Outlook from Office 03.  Date/time show correct on my desktop and on the device but, every time I synchronize, the calendar seems to get messed up with hour shifts on different entries. Sometimes I can see a time appear on the "details" screen when I'm synchronizing that is an hour off from the time that is on the device?  Any ideas? Many thanks.

    Sorry--meant to also say that I had reviewed the most recent similar thread on this.  In addition to both the PC and device having the right time, I did confirm both are set to the same time zone.  Really stumped on this one--thanks again.

Maybe you are looking for