Help with Update a Split Form

Hi, guys! really really need a help, I'm crazy about this problem, don't have any idea what I need to do.
Look,
I have a little base, where I want develop a AIO little system, where the user makes filters or click in some pre-defined filters to get the numbers they will need.
I have some tables (register, consume, filters, R1)
R1 is the only table created over a query (I tooked some fields of register make a INNER JOIN with consume, and the results was the R1 table)
After that, I created a form, set as split form, use the header to put the links and buttons and filters and the Detail Form put to appear the datasheet of the fields from R1 table.
Nice and done until now, no problem. My problem appear here, when I decide to create a button to update the datasheet on this split form.
But what I understand is to appear the datasheet u need put the fields on the detail form (fields like a text box, cause don't mind, cause don't will appear any way). so after u put this field the datasheet will be loaded. But Now when the user click on
this button I want this datasheet show-me the fields from my QUERY.
how?! I can't do this?! what tips you can give me? please! really need something like that.
Thks!

But Now when the user click on this button I want this datasheet show-me the fields from my QUERY.
Open datasheet in design view and in Property Sheet - Data select the query as Record Source.
Build a little, test a little

Similar Messages

MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

Hello-
Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now." although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available. Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now." If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash? Does it come in an email?
Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash? (The way before this icon was added to System Preferences)?
I would appreciate help with updating Flash to the most recent version. I used to uninstall the older version, restart the browser and download the most recent version and install it. It always worked find but this was before there was an Adobe icon in my system Preferences.

Hello,
The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed. Uninstalling shouldn't be required, but it definitely doesn't hurt. If you feel comfortable doing it the old way, please feel free to continue using that process.
As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released. This usually occurs when the browser loads swf content. Clicking the button will, like you mention, immediately check. Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
Is there a way to be automatically notified when a new Flash Runtime release is made?
Thanks,
Chris

I need help with a 1 Page Form with scrollable text field (5000 limit characters) and printing

Hello, I have no training in using Adobe Acrobat Pro or Livecycle Designer so I need major help with a 1 page form that I am attempting to create. Basically the form will be used to nominate employees for a Job Well Done Award.
The form contains the following:
1.) The name(s) of the employees being nominated and the date of the accomplishment.
2.) In the middle of the page I have a section for a write up, limited to 5000 characters, this is were I am needing the most help. A couple of things, about this section: The font is set at 11 and I don't want it to change. The text field has multiple-line, scroll long text enabled. The text field is a certain size and can only hold so much text, then it starts to scroll, which I am ok with, I like that feature. The issue I am having is during printing. I would like to keep the text field scrollable but when I print I would like to be able to print everything in that field. Executing this is the problem, I have no clue how to do it. I was hoping for some setting within Acrobat Pro or LiveCycle to be available, but the more I read and research this, it appears that it may require java, xml, basically some coding. I don't know for sure.
3.) Below the text field I have another field for the person nominating to type their name and right next to that another field for a digital signature.
4.) And finally below those two fields I have a Submit button that is setup to start email application so the form can be emailed to the proper inbox.
Thank you in advance.

With an Acrobat form the only thing you can do is export the text to
another location (like a blank field on another page) or to another file
format. With an LCD form you can expand the text box itself, but you'll
need to ask about that over at the LCD Scripting forum.

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Need help with updating Name Server update for home webserver

I set up a webserver at home to run my own domain/website. I am able to type my IP address into Safari/IE and get to my website fine. I now need to update the NameServer with the previous domain hosting service, but I have no idea how to find out the NameServer (Compast is my ISP) to put into the UPDATE NAME SERVERS form for the previous hosting company. I need to obviosly do this before people who type in my web address can be directed to my home server instead of the old hsoting company. The previous hosting server is ns.teammediaonline and ns1.teammediaonline.com. Do I use something like ns.comcast.net or something? I already have the IP address and know it works fine. Comcast does notchange the IP's too often and I will not have much traffic to my site, so I should not have any issues with them. I am sure this is a very simple issue. Any help would be greatly appreciated.

Hi--
You definitely do not want to contact Comcast. Servers are forbidden to their residential customers. If you contacted them, not only would they refuse to help, that might put you on a list to watch in case you do set one up. Now, if you're careful, don't server out a lot of traffic, and aren't a general nuisance to the people on your node, they most likely won't notice if you don't contact them.
However, you'll need to look into a different DNS solution. Do a search for "Dynamic DNS" and you'll find a number of services that will be able to help you out. This one, DynDNS, has some reading material that might help to explain what you need to do...
charlie

Help with e-mailing a form

Hi, i am new to the forum and I just put up a new wesite for
my company since the other one was outdated. I look around the
forum to see what previous post could help me but no such luck. I
am using Dreamweaver 8 and I need help with emailing a form.
Here is the code of the form page and the script
Can someone help me?

The form needs to submit to a page that will have the email
processing code
on it. What you put there will depend on how you are sending
the mail ..
i.e. what server components are available to you on the
server such as JMail
or CFMail or PHPMail or ASPEMail .. etc. You already know
what server model
you are using and you should be able to find out what you
have to work with
on your host's web site.
If this is not already an active web site with a server
model, you can use
something like Form Mail, a CGI script that will do that job
for you ..
available at
http://www.cgi-resources.com
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"nitrodragon3000" <[email protected]> wrote
in message
news:e8lsmd$151$[email protected]..
> Hi, i am new to the forum and I just put up a new wesite
for my company
> since
> the other one was outdated. I look around the forum to
see what previous
> post
> could help me but no such luck. I am using Dreamweaver 8
and I need help
> with
> emailing a form.
>
> The website address is
http://www.1helical.com and the
form is under quote
> request.
>
> Can someone help me?
>

Help with Update task

Hi friends,
In the below am trying to update a custom table using a call function in update task. I dont see the table getting updated can someone take a look at it and let me knw what the problem is? I have the commit work statement and also marked the function module as an update one in the attribute. Please help me . Thanks in advance! kathy
*& Include           ZINBOUND_TEST
Report: ZINBOUND_TEST.
DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
      l_unit     TYPE REF TO if_trfc_unit_inbound,
      l_inb_dest TYPE bgrfc_main_i_dst,
      lv_matid TYPE /sapapo/matid,
      lv_matnr TYPE /sapapo/matnr,
      lv_maktx type /SAPAPO/MAKTX,
      lv_langu TYPE LANGU.
data: lt_product type STANDARD TABLE OF ZUPDATE,
      ls_product type ZUPDATE.
lv_matid = '123'.
lv_langu = 'E'.
lv_maktx = 'Materia1'.
CALL FUNCTION 'Z_TEST' IN UPDATE TASK
EXPORTING
    iv_matid = lv_matid
    iv_maktx = lv_maktx
    iv_langu = lv_langu .
COMMIT WORK.
select * from zupdate into corresponding fields OF TABLE lt_product.
if sy-subrc <> 0.
write 'no records added'.
else.
loop at lt_product into ls_product.
    write: / ls_product-MATID,
             ls_product-MAKTX.
endloop.
endif.
FUNCTION Z_TEST.
*"*"Update Function Module:
*"*"Local Interface:
*" IMPORTING
*"     VALUE(IV_MATID) TYPE /SAPAPO/MATID
*"     VALUE(IV_MAKTX) TYPE /SAPAPO/MAKTX
*"     VALUE(IV_LANGU) TYPE LANGU
data: itab type standard table of zupdate,
wa_itab type zupdate.
wa_itab-matid = iv_matid.
wa_itab-maktx = iv_maktx.
wa_itab-langu = iv_langu.
append wa_itab to itab.
update zupdate from table itab .
ENDFUNCTION.
Edited by: ka reddy on Sep 24, 2009 4:14 PM
Edited by: ka reddy on Sep 24, 2009 4:15 PM
Edited by: ka reddy on Sep 24, 2009 4:16 PM
Edited by: ka reddy on Sep 24, 2009 4:17 PM
Edited by: ka reddy on Sep 24, 2009 4:21 PM

Hey Naimesh thanks for the reply. yeah i read that document way before and i started taking a stab at implementing it.
I started with update task to see how it behaves and then wanted to go with BGRFC tats when i had the update issue.
Now that am done with update i want to implement BGRFC.
I have modified the earlier prgm...Can you give me some ideas how to extend this? Thanks!
*& Include           ZBGRFC_INBOUND_TEST
Report: ZBGRFC_INBOUND_TEST.
DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
      l_unit     TYPE REF TO if_trfc_unit_inbound,
      l_inb_dest TYPE bgrfc_main_i_dst,
      lv_matid TYPE /sapapo/matid,
      lv_matnr TYPE /sapapo/matnr,
      lv_maktx type /SAPAPO/MAKTX,
      lv_matid1 TYPE /sapapo/matid,
      lv_matnr1 TYPE /sapapo/matnr,
      lv_maktx1 type /SAPAPO/MAKTX,
      lv_langu1 TYPE LANGU,
      lv_langu TYPE LANGU.
data: lt_product type STANDARD TABLE OF ZUPDATE,
      ls_product type ZUPDATE.
lv_matid = '125'.
lv_langu = 'E'.
lv_maktx = 'Materia3'.
**--Get the inbound destination for BGRFC.
IF l_inb_dest IS INITIAL.
      SELECT SINGLE * FROM bgrfc_main_i_dst INTO l_inb_dest.
    ENDIF.
    l_dest = cl_bgrfc_destination_inbound=>create( l_inb_dest-destination ).
    l_unit = l_dest->create_trfc_unit( ).
CALL FUNCTION 'Z_TEST' IN BACKGROUND UNIT l_unit
EXPORTING
    iv_matid = lv_matid
    iv_maktx = lv_maktx
    iv_langu = lv_langu .
select * from zupdate into corresponding fields OF TABLE lt_product.
if sy-subrc <> 0.
write 'no records added'.
else.
loop at lt_product into ls_product.
    write: / ls_product-MATID,
             ls_product-MAKTX.
endloop.
endif.
Edited by: ka reddy on Sep 24, 2009 5:16 PM

Help with the insert table/form tool in BIP 10.1.3.2.1

Hi, I'm trying to use the insert table/form tool in BIP, and running into some issues that I don't understand. First off, my data coming in looks like this (left column of tool):
Rowset
--- Row
------ Customer ID
------ Customer Name
------ Customer City
------ Product
------ Amount Sold
I would like the output to do the following:
a) have one page per customer. Customer should be determined by customer ID, and has attributes of customer ID, customer Name, Customer City
b) Show a table of all products and the total Amount Sold by product for that customer
c) Give a "grand total" for the customer
Can someone help with the steps needed to do this? I've tried several variations of the following without much luck:
1) Added Rowset and all children to the "Template" pane
2) Clicked on the "Row" group, and set Grouping = Customer ID, with a break of "New page per Element"
3) Clicked on the newly created (from step 2) Cust ID group, and set it to group by Product
4) Moved "amount sold" to be at same level as Product
5) Moved all of the customer attributes (name, address, etc.) to be at same level as Cust ID
6) On the Cust ID level, set the style to table
7) on row and rowset levels, set style to free form
This seems to be VERY close, except that it isn't creating a total amount for the sum of all products purchased by a customer. What do I need to do inside the tool to get a total per customer to show up?
Thanks in advance!
Scott
p.s. the final hierarchy in the template window looks like this:
Rowset (style = freeform, no grouping/sort by/breaks)
--- Row (style = freeform, group by customer ID, break new page per element)
------ Customer ID (style = table, group by product, no breaks)
--------- Product (nothing special)
--------- Amount Sold (calc for grouping = SUM)
------ Customer Name (nothing special)
------ Customer City (nothing special)
Thanks very much for the help!
Scott

To anyone else who sees this post, the answer is to do the following. Insert the Amount Sold field using the "Insert Field" tool, and set the function to sum, with the grouping checkbox turned on.
Thanks,
Scott

Help with Updates

My son has a Droid Inc2 and has had multiple problems with updates. They always happen overnight and he gets a message telling him to do a battery pull to avoid further messages regarding the update. Each time we eventually have to do a hard reset so that we can restore the service to the phone. This has been happening for quite sometime now starting back in early August.
The current software running is 3.02.605.1. My wife messaged a VZW Support Rep on Twitter about it and was told it was an old software version and to keep trying to pull the update. We have stopped trying since having to do a reset this weekend. This is really aggravating and I need to know what we should do. Right now if you check for software update it acts like it's checking but then does nothing more. Then in a couple days the phone will try to update overnight.
Someone please tell me what needs to be done. I have looked thru the oter posts and couldn't find what I needed and got tired of looking at all the pages of posts regarding the updates.
Thx!

AntonioC_VZW wrote:
Hi 2tonpickup,
I understand your concerns regarding your son's phone. We also value your time and have different processes in place to troubleshoot any issues with your phones. Please keep in mind that this is a peer to peer forum and while our Social Media Team monitors these forums the best way to get assistance troubleshooting a device is to call us at 800-922-0204 from a different phone and have the faulty device fully charged and available when calling.
Your device includes a one year manufacturer's warranty and we'll be happy to replace it with a Certified Like New unit of the same model if we are unable to resolve your concerns and phone is under warranty. Please visit this LINK for replacement process details.
To the original poster: Please keep in mind that the Verizon employees are moderators, meaning that they mostly make sure we abide by the rules and regulations of the forums. While they do chime in occationally to help, your best bet is really to call tech support first or to go into a Verizon store.

Help with Update failure please

I have Adobe Photoshop CC running on win 7 64 bit. When doing the latest batch of updates one keeps failing with the error message "Adobe CSXS Infrastructure 4 Installation Failed Error Code U44M1P7" Can anyone help with this?

Thanks Eshant
I had since been researching this on the web and it seems it is a very
common fault which has not always been fixed by the full re-install
advocated by Adobe in the link you kindly provided. I therefore decided
to keep trying for a couple of days before resorting to such a drastic
solution.
After several failures to get CSXS Infrastructure 4 to install, both via
the CC Desktop App and from the "Help" menu within Photoshop CC, I had
one more try this morning and this time it seems to have installed
without a hitch. I have no idea why, as I have made no system changes,
but for now I do seem to have solved the problem as my installation of
Photoshop CC is now reporting that it is fully up to date.
Thanks for your response.
Pixellated

Help with updating the grid(CONNECT 4)

Hi, this a small portion of my connect 4 game program. I have a problem with updating the grid. During the game, whenever I enter a column number for the first time, the program works properly. But when i try to give the same column for the second time, the chip falls in the same row instead of going to the second row. Can anybody help me write the method that will do this.
This is the method that switches the chip's value(By the way discard the variable 'turn' because that works properly, it is used in another method):
    //Method 2: Updates the matrix
    public static void UpdateMatrix (char location, char turn)
        c.println (location);
        switch (location)
            case '1':
                matrix [5] [0] = turn;
                break;
            case '2':
                matrix [5] [1] = turn;
                break;
            case '3':
                matrix [5] [2] = turn;
                break;
            case '4':
                matrix [5] [3] = turn;
                break;
            case '5':
                matrix [5] [4] = turn;
                break;
            case '6':
                matrix [5] [5] = turn;
                break;
            case '7':
                matrix [5] [6] = turn;
                break;
    } //End Method 2Can anybody describe me how to write a method or write a method that will tell the computer to assign the chip to the next row. You an edit my method if u want to. THANX A LOT!!!

HERE IS THE METHODS SO FAR!
    //Method 3: Checks if assigned place for the chip has a chip there already
    public static void emptyspot (int column, int row)
        for (row = 5 ; row >= 0 ; row--)
            for (column = 0 ; column <= 6 ; column++)
                if (matrix [row] [column] == 'X' || matrix [row] [column] == 'O')
                    row--;
    }I AM GETTING AN ERROR!!! AT THE BOTTOM OF MY PROGRAM! SOMEBODY HELP!
Message was edited by:
Taufiq

Help with html / php contact form

Hi guys I was hoping to get some help with a contact form on my website, to be honest I havent a clue about php but kind of okay with html thats why the php code is just a copy and paste from some website, just trying to marry it up with the html but getting errors.
Hopfully one of you can see the problem.
Error on Submitting:
Notice: Undefined variable: name in \\nas44ent\Domains\g\gethinhayman.co.uk\user\htdocs\send_form_email.php on line 69
Notice: Undefined variable: message in \\nas44ent\Domains\g\gethinhayman.co.uk\user\htdocs\send_form_email.php on line 75
We are very sorry, but there were error(s) found with the form you submitted. These errors appear below.
The Name you entered does not appear to be valid.
The Comments you entered do not appear to be valid.
HTML Code:
<section id="contact" class="four">
                                                            <div class="container">
                                                                      <header>
                                                                                <h2>Contact</h2>
                                                                      </header>
                                                                      <form method="post" action="send_form_email.php">
                                                                                <div class="row half">
                                                                                          <div class="6u"><input type="text" class="text" name="name" placeholder="Name" /></div>
                                                                                          <div class="6u"><input type="text" class="text" name="email" placeholder="Email" /></div>
                                                                                </div>
                                                                                <div class="row half">
                                                                                          <div class="12u">
                                                                                                    <textarea name="message" placeholder="Message"></textarea>
                                                                                          </div>
                                                                                </div>
                                                                                <div class="row">
                                                                                          <div class="12u">
                                                                                                    <a href="http://www.mywebsite.co.uk/email_form.php" class="button submit">Send Message</a>
                                                                                          </div>
                                                                                </div>
                                                                      </form>
                                                            </div>
                                                  </section>
php Code:
<?php
if(isset($_POST['email'])) {
    $email_to = "my email address";
    $email_subject = "Mail from Site";
    function died($error) {
        // your error code can go here
        echo "We are very sorry, but there were error(s) found with the form you submitted. ";
        echo "These errors appear below.<br /><br />";
        echo $error."<br /><br />";
        echo "Please go back and fix these errors.<br /><br />";
        die();
    // validation expected data exists
    if(!isset($_POST['name']) ||
        !isset($_POST['email']) ||
        !isset($_POST['message'])) {
        died('We are sorry, but there appears to be a problem with the form you submitted.');
    $first_name = $_POST['name']; // required
    $email_from = $_POST['email']; // required
    $comments = $_POST['message']; // required
    $error_message = "";
    $email_exp = '/^[A-Za-z0-9._%-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}$/';
if(!preg_match($email_exp,$email_from)) {
    $error_message .= 'The Email Address you entered does not appear to be valid.<br />';
    $string_exp = "/^[A-Za-z .'-]+$/";
if(!preg_match($string_exp,$name)) {
    $error_message .= 'The Name you entered does not appear to be valid.<br />';
if(strlen($message) < 1) {
    $error_message .= 'The Comments you entered do not appear to be valid.<br />';
if(strlen($error_message) > 0) {
    died($error_message);
    $email_message = "Form details below.\n\n";
    function clean_string($string) {
      $bad = array("content-type","bcc:","to:","cc:","href");
      return str_replace($bad,"",$string);
    $email_message .= "Name: ".clean_string($name)."\n";;
    $email_message .= "Email: ".clean_string($email)."\n";
    $email_message .= "Message: ".clean_string($message)."\n";
// create email headers
$headers = 'From: '.$email_from."\r\n".
'Reply-To: '.$email_from."\r\n" .
'X-Mailer: PHP/' . phpversion();
@mail($email_to, $email_subject, $email_message, $headers);
?>
<?php
?>

PHP CODE: SaveAs send_form_email.php
<?php
if(isset($_POST['email'])) {
    // EDIT THE 2 LINES BELOW AS REQUIRED
    $email_to = "[email protected]";
    $email_subject = "Your email subject line";
    function died($error) {
        // your error code can go here
        echo "We are very sorry, but there were error(s) found with the form you submitted. ";
        echo "These errors appear below.<br /><br />";
        echo $error."<br /><br />";
        echo "Please go back and fix these errors.<br /><br />";
        die();
    // validation expected data exists
    if(!isset($_POST['name']) ||
        !isset($_POST['email']) ||
        !isset($_POST['message'])) {
        died('We are sorry, but there appears to be a problem with the form you submitted.');
    $name = $_POST['name']; // required
    $email_from = $_POST['email']; // required
    $comments = $_POST['message']; // required
    $error_message = "";
    $email_exp = '/^[A-Za-z0-9._%-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,4}$/';
if(!preg_match($email_exp,$email_from)) {
    $error_message .= 'The Email Address you entered does not appear to be valid.<br />';
    $string_exp = "/^[A-Za-z .'-]+$/";
if(!preg_match($string_exp,$name)) {
    $error_message .= 'The Name you entered does not appear to be valid.<br />';
if(strlen($message) < 2) {
    $error_message .= 'The message you entered does not appear to be valid.<br />';
if(strlen($error_message) > 0) {
    died($error_message);
    $email_message = "Form details below.\n\n";
    function clean_string($string) {
      $bad = array("content-type","bcc:","to:","cc:","href");
      return str_replace($bad,"",$string);
    $email_message .= "Name: ".clean_string($name)."\n";
    $email_message .= "Email: ".clean_string($email_from)."\n";
    $email_message .= "Message: ".clean_string($message)."\n";
// create email headers
$headers = 'From: '.$email_from."\r\n".
'Reply-To: '.$email_from."\r\n" .
'X-Mailer: PHP/' . phpversion();
@mail($email_to, $email_subject, $email_message, $headers);
?>

Thank you for contacting us. We will be in touch with you very soon.
<?php
?>
HTML Code -- save as html page.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Contact Form</title>
</head>
<body>
<section id="contact" class="four">
<div class="container">
<header>
<h2>Contact</h2>
</header>
<form method="post" action="send_form_email.php">
<div class="row half"> <div class="6u">
<input type="text" class="text" name="name" placeholder="Name" />
</div>
<div class="6u">
<input type="text" class="text" name="email" placeholder="Email" />
</div>
</div>
<div class="row half"> <div class="12u">
<textarea name="message" placeholder="Message"></textarea>
</div>
</div>
<div class="row">
<div class="12u">
<input type="submit" name="submit" value="Send">
</div>
</div>
</form>
</div>
</section>
</body>
</html>
Upload both to your Apache server to test.
EDIT: changed typo on Submit button -- valuse to value.
Nancy O.

I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

Help with Update a Split Form

Similar Messages

Maybe you are looking for