Help with Updated Firmware and Mediasou

Hey,
Looking for a quick reply if possible. I recently updated the firmware and the layout of my Zen touch has changed in Mediasource. Let me show you what it was, and what I wanted it as (for the easy transfer of files, eg. have the artist/album/genre bar on the side)
[IMG"]http://img64.imageshack.us/img64/829/creative00qo8.th.jpg[/IMG]
This is what it is, with folder etc. I dont want it like this.
[IMG"]http://img89.imageshack.us/img89/6329/creative002el3.th.jpg[/IMG]
Any help would be appreciated. Thank you.

Your firmware is the PlaysForSure (also known as MTP) version. For PlaysForSure devices, the organization of the tracks as seen in the PC software (such as Creative MediaSource, Creative ZEN Media Explorer and Windows Media Player) is by folders and filenames. That is the nati've organization of PlaysForSure.

Similar Messages

Problem with update Firmware and Fax with m276nw

Hi
First of all sorry for my english...
I have two problems
1) I can't update the printer in wirelless mode, I mean the update program (version 2014-08-05 , Version 20140718, 12.05M) and the printer work but finally the printer is not updated.
How can i do it?
2) I'd prefer to forward fax in email or in alternative I'd want to read in a web interface. In this case I have a suggestion: An update could be the way.
Thx
P.S. Sorry again

Hello @Compyweb,
Welcome to the HP Support Forums!
I would like to assist you today in resolving the firmware update issue and the fax forward to email issues that you're experiencing on your HP Laserjet Pro 200 Colour MFP M276nw. I understand that you have been trying to update your printers firmware via the wireless connection but your printer does not want to do that. I'm going to provide you further instruction on how to properly update the firmware.
How to Properly Update Firmware:
It is best to update firmware through a USB Cable connection. This is because the firmware update will reprogram your printer. Sometimes with wireless connections there can be intermittent communication. If the firmware update is interrupted in any way while the printer is being updated it can cause a programming failure on your printer. If this occurs you most likely would need a printer replacement. Also, a firmware update gets sent to your printer much like a print job. Therefore, you need to ensure that you do no have any print jobs in queue waiting to print before you update the firmware.
What I would suggest doing is running the HP Print and Scan Doctor Tool. If you run this tool and select 'fix printing' than the tool will run a scan on your computer and ensure that the connection, software and driver are all properly setup. If the HP Print and Scan Doctor identifies any issues it will attempt to resolve them for you. I suggest installing the printer for USB connection before running this tool as you want to run the firmware update through USB.
HP Print and Scan Doctor
Once you run the HP Print and Scan Doctor Tool and get the all clear that everything is set up properly than you can run the firmware update. Please click on the following link for the proper firmware download:
HP LaserJet Pro Series Firmware Update Utility
Once the utility is downloaded, you want to run the tool and send the firmware to the printer. The printer may turn itself off at the end of the update, just turn the printer back on if it doesn't turn on automatically.
In terms of wanting to forward faxes to email or an alternative option like receiving faxes in a folder on your computer, these are not options that you have with your HP Laserjet Pro 200 Colour MFP M276nw. As the specs for your model printer: LaserJet Pro 200 color MFP M276nw Specs indicate you only have the option to send faxes from a computer.
Should you still want to receive faxes to your email you could check out the third party service: Efax
However, I believe you may have to pay for this service. Also, should you have any issues with the Efax service HP does not support this on your product. That means that if you need technical support for efax you need to speak with efax regarding this. For further information regarding Efax, please visit: Efax: Easy faxing anywhere
Please let me know if this information resolves your issues. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Help with UPDATE table and database RELATIONSHIPS

HI there, I have been trying to create an update table for
weeks now and keep getting error messages.
The database has a table named:
"books" in the table cells are "idbook" and "book".
"suppliers" in the table cells are "idsupplier" and
"supplierName".
"category" in the table cells are "idcategory" and
categoryName"
They all have a relationships with this table:
"results" in the cells are "idbook", "idsupplier" and
"idcategory".
This "results" table brings all of the above tables together.
When I try to do an update, i am doing one to the results
table. Is this correct?
The updates have problems because when drawing the text to
the update table to view it comes in text form.
When trying to update, it wont becuase all of the cells in
the results table are numeric. This is because of the
relationships.
Can anyone suggest where i may be going wrong.
Ask anything you need to.
TA

MM_editCmd.CommandText = MM_editQuery
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
If (MM_editRedirectUrl <> "") Then
Response.Redirect(MM_editRedirectUrl)
End If
End If
End If
%>
<%
Dim Recordset1__MMColParam
Recordset1__MMColParam = "1"
If (Session("MM_UserName") <> "") Then
Recordset1__MMColParam = Session("MM_UserName")
End If
%>
<%
Dim Recordset1
Dim Recordset1_numRows
Set Recordset1 = Server.CreateObject("ADODB.Recordset")
Recordset1.ActiveConnection = MM_connSeek_STRING
Recordset1.Source = "SELECT * FROM Query1 WHERE UserName = '"
+ Replace(Recordset1__MMColParam, "'", "''") + "'"
Recordset1.CursorType = 0
Recordset1.CursorLocation = 2
Recordset1.LockType = 1
Recordset1.Open()
Recordset1_numRows = 0
%>
<%
Dim rsUpdate
Dim rsUpdate_numRows
Set rsUpdate = Server.CreateObject("ADODB.Recordset")
rsUpdate.ActiveConnection = MM_connSeek_STRING
rsUpdate.Source = "SELECT * FROM tblSpecies"
rsUpdate.CursorType = 0
rsUpdate.CursorLocation = 2
rsUpdate.LockType = 1
rsUpdate.Open()
rsUpdate_numRows = 0
%>
<%
Dim Repeat1__numRows
Dim Repeat1__index
Repeat1__numRows = -1
Repeat1__index = 0
Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
%>
<html>
<head>
<link href="css%20files/paragraph.css" rel="stylesheet"
type="text/css">
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0"
marginwidth="0" marginheight="0"
onLoad="MM_preloadImages('images/Publicationb.gif','images/Factsheetsb.gif')">
<table width="100%" height="100%" border="1"
cellpadding="0" cellspacing="0" bordercolor="#5D5D5D">
<tr>
<td colspan="2">
<div align="right"></div>
<div align="left"></div>
</td>
</tr>
<tr>
<td colspan="2"><table width="100%" height="100%"
border="0" cellpadding="0" cellspacing="0"
bordercolor="#5D5D5D">
<tr>
<td valign="top"><form
ACTION="<%=MM_editAction%>" METHOD="POST" name="form1">
<table width="90%" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<td valign="top"><div
align="center"></div> <table border="1" align="center"
cellpadding="2" cellspacing="0" bordercolor="#FFFFFF">
<tr bgcolor="ECECD7">
<td colspan="2"><div align="center">
<p><strong><font size="3">Update Key Word
& Category</font></strong></p>
</div>
</td>
</tr>
<tr>
<td><div align="center">
<p><font size="1">Enter Up to 10 Species /
Product
Name</font></p>
</div>
</td>
<td><div align="center">
<p><font size="1">Select a
Category</font></p>
</div>
</td>
</tr>
<tr>
<td colspan="2" bordercolor="#D0D09D">
<%
While ((Repeat1__numRows <> 0) AND (NOT
Recordset1.EOF))
%>
<table width="100%" border="0" cellspacing="0"
cellpadding="0">
<tr><td width="50%"><div align="center">
<input name="f1" type="text" id="f13"
value="<%=(Recordset1.Fields.Item("TimberSpecies").Value)%>"
size="33">
</div></td>
<td width="45%"><div
align="center"></div></td></tr></table>
<%
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
Recordset1.MoveNext()
Wend %>
<div align="center"> </div> <div
align="center">
</div></td></tr><tr>td
colspan="2"> </td></tr><tr><td
colspan="2"><div align="right"><p><font
size="1">To Finalise Your Changes Please Press the Update
Button
<input name="update2" type="submit" id="update"
value="Update">
<input type="hidden" name="MM_update" value="form1">
<input type="hidden" name="MM_recordId" value="<%=
rsUpdate.Fields.Item("TimberSpecies").Value %>">

Help with updating model and serial on thinkpad tablet 2

Hi was after the procedure for changing / updating the MTM and serial number on a thinkpad tablet 2 that has just had a new mainboard installed.
We are a authorised warranty center in AUS yur help would be appreciated

You need to go through your formal Lenovo contacts for these tools/procedures. We can't help you from the forum.

Help with Updating Iphone and Ipod after updating Apple ID

I just updated my email/Apple Id and unable to login to my App store or anything on my Iphone or my Ipod what do I need to do to get this corrected? Please HELP!!

Have you tried logging out of your old one first?

Help with update issues and resulting boot problems

Ok so I have arch installed and can get through all the updating except for glibc..I know there are countless post on the subject and I have spent the past two days reading through them. I have also broken my system and have done about 15 re-installs trying to get through this. Also, after I update (excluding glibc) and re-boot I get the root device cannot be found error and am dropped to a shell.
What I am asking is, can someone PLEASE give me a straight forward answer on how to fix this stuff...I'm tired of reading and re-installing.
I'd appreciate any help you can give..

If you're using the most recent iso, the /lib to /usr/lib move has already been taken care of, so none of those countless bbs threads (or the infinitely superior official advice from the devs) apply any more. Please post the exact commands you are using and the exact error messages you are seeing.

MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

Hello-
Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now." although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available. Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now." If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash? Does it come in an email?
Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash? (The way before this icon was added to System Preferences)?
I would appreciate help with updating Flash to the most recent version. I used to uninstall the older version, restart the browser and download the most recent version and install it. It always worked find but this was before there was an Adobe icon in my system Preferences.

Hello,
The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed. Uninstalling shouldn't be required, but it definitely doesn't hurt. If you feel comfortable doing it the old way, please feel free to continue using that process.
As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released. This usually occurs when the browser loads swf content. Clicking the button will, like you mention, immediately check. Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
Is there a way to be automatically notified when a new Flash Runtime release is made?
Thanks,
Chris

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Driver help with adapter firmware upgrade

I'm trying to upgarde the firmware for my Netgear WG511T adapter. After
uninstalling the current firmware, the Netgear firmware upgrade
installation requests the infamous 'Novell Netware DOS driver disk' -
first thing it wants is "lsl.com" (not sure if I will need others).
I've pointed the installer to the likely folders and searched the hard
drive for the file, but no success.
I have found a couple of Novell drivers files at:
1) http://www.novell.com/coolsolutions/tools/13555.html
reportedly useful for my situation
and
2) http://download.novell.com/SummaryFr...d=SUeAaKqKpQA~
the latest (& last?) Novell Client v3.4 for Windows* 95/98
My question is - Am I on the right track ? - thing is, probably
obviously, that I (think?) I know just enough to be dangerous.
I thought it would be a good idea to ask how I should proceed here, in
this forum, after searching for help with this situation and only
finding clues, as opposed to a clear solution.
Thank you,
MB

Alright - just in case this comes-up in someone's search for advice on
the same problem.
Turns-out I did not really need any drivers - I saw a comment to that
effect on another site in my search for tips.
Anyway - anyone with the same problem should just 'cancel' the search
for drivers and continue the installation of the firmware - mine
installed after I cancelled the search for 'lsl.com'
I now have my first wireless network running - and with WPA encryption
- and it is working !
Thanks,
MB

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

I just updated firmware and it dosen't work.

I bought my router EA6500 and just updated firmware and it became a brick.The logo light keeps blingking and I can't even go into the setup.I downloaded the latest firmware and manually updated.It seemed went ok everything and said it's going to reboot but it went into this blingking mode.Is it because I did something wrong or it's because I bought a refurbished product.

Where was the firmware downloaded? Was it from the Linksys website? Resetting the router may straighten this up. Press and hold the reset button for 10 to 15 seconds. Then, reboot and reconfigure it. I'm not sure which version do you have but you may check it on the system label that is found underneath the device. Select the correct hardware version and download the firmware from this link. Once accomplished, reset again the router and configure it. If the same thing will happen, it's best to contact Linksys and have it replaced.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Help with Updated Firmware and Mediasou

Similar Messages

Maybe you are looking for