Help with Updating Page

Hi, I have inherited the updating of our website. I am trying
to edcuate myself about Dreamweaver, CSS and HTML with as much
reading of books, online material like this forum and tutorials. I
am a novice with limited training in DW, but am willing to put in
the work. I think I have a big burden.
This site was created in FrontPage by an outside firm and was
transferred to DW in house (I think).
Documentation is about non-existent beyond web host info and
passwords. I don't think it was considered that certain pages
within the site would be edited. I am trying to understand what is
going on in the code, but I am baffled.
I am trying to edit the dropdown menu to remove one location,
New York.
When I delete what I think are the appropriate lines of code,
the remaining items in the menu fail to display the correlating
info in the text area and in the image area on the right side of
the page.
This is the page;
http://www.wesgarde.com/branches.shtml
Can anyone help me get that one location removed, along with
making the rest of the menu items fall into place?
Appreciate any info,
Thanks, Michele

The problem is that the Add-ons Manager tab when opened the first time, is on "Get Add-ons" section and that must be downloaded from the Add-ons server which might be overburdened.
* If you need to look for new Add-ons, go directly to the Add-ons site -> https://addons.mozilla.org/en-US/firefox/
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for New versions of your Add-ons]]
Check and tell if its working.
Not related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Similar Messages

  • Help with updates for CS6

    I need help installing latest updates for CS6.  I have Win 7 and have tried updating from the Help - Updates menu.  The error is:  U43M1D207.

    Thanks for your response.  I am in the United States in So. Arizona.
    Date: Fri, 5 Oct 2012 12:21:45 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help with updates for CS6
    Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Crunkle1 you are welcome to work directly with our support team for guided assistance.  If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone.  Which country/region are you in?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

    Hello-
    Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs.  One allows updates to check automatically.  It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now."  although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available.  Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now."  If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash?  Does it come in an email?
    Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash?  (The way before this icon was added to System Preferences)?
    I would appreciate help with updating Flash to the most recent version.  I used to uninstall the older version, restart the browser and download the most recent version and install it.  It always worked find but this was before there was an Adobe icon in my system Preferences.

    Hello,
    The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed.  Uninstalling shouldn't be required, but it definitely doesn't hurt.  If you feel comfortable doing it the old way, please feel free to continue using that process.
    As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released.  This usually occurs when the browser loads swf content.  Clicking the button will, like you mention, immediately check.  Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
    Is there a way to be automatically notified when a new Flash Runtime release is made?
    Thanks,
    Chris

  • Help with home page link

    Hi
    Does anyone can help me ?
    I created a web and now I am creating a second folder/ file. How can I link this second folder to the home page placed in first folder ?
    Sorry for my English

    Hi Cari
    Tanhks for you help.  This open my mind, you mean  I need to have two website to this ?
    I ask you this because I have only one website. the acces to my site is only through customer site. I mean I give him the right link  (one link for Company A and another link for company B, both coming from site), do you understand what I mean?
    The point I do not understan is if I save file web A, as  Web B and then I change page names, master and so on, and the I up load, why does muse overwrite in file A when pages are different name !!!!
    The point is Muse does not allow to copy / paste !!!
    Any idea Cari
    Regards from Buenos Aires
    Felix Cano Montoya
    [email protected]
    El 11/4/2015, a las 23:21, Cari Jansen <[email protected]> escribió:
    Help with home page link
    created by Cari Jansen <https://forums.adobe.com/people/Cari+Jansen> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7430081#7430081>
    I'm not sure I've got a grasp on the issue you are having but let me give it a try
    Website A is finished and you have uploaded it to the Internet, so it is LIVE.
    You make a copy of Website A, and call it Website B, then make all required changes.
    IF you uploaded Website B, then it is likely you will overwrite Website A. You must instead, upload Website B as a separate Website.
    To publish to a new site:
    Click Publish.
    Then click the expansion triangle left of Options.
    Change Publish To setting to New Site
    fill out rest of required details, and click OK to publish.
    You'll now have two separate web-sites.
    If you need to link between them, use absolute hyperlinks (the full URL).
    Hope this helps.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7430081#7430081 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7430081#7430081
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • HT201541 I need help with updating my browser.

    I need help with updating my browser.  Its telling me that Safari is outdated.

    That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Help with updates - The software change returned error code 0x87D00215(-2016411115).

    I have rolled out bunch of updates across few hundred workstation systems.
    Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
    Looking at one of the workstations, I can see 5 updates are pending download at 0%.
    Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
    rebooting the workstations few times.
    (I have also tried to use Windows Update and install one of these manually, which worked.)

    Investigating this further, I have found the following in CAS.log:
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

  • Help with Updates

    My son has a Droid Inc2 and has had multiple problems with updates. They always happen overnight and he gets a message telling him to do a battery pull to avoid further messages regarding the update. Each time we eventually have to do a hard reset so that we can restore the service to the phone. This has been happening for quite sometime now starting back in early August.
    The current software running is 3.02.605.1. My wife messaged a VZW Support Rep on Twitter about it and was told it was an old software version and to keep trying to pull the update. We have stopped trying since having to do a reset this weekend. This is really aggravating and I need to know what we should do. Right now if you check for software update it acts like it's checking but then does nothing more. Then in a couple days the phone will try to update overnight.
    Someone please tell me what needs to be done. I have looked thru the oter posts and couldn't find what I needed and got tired of looking at all the pages of posts regarding the updates.
    Thx!

    AntonioC_VZW wrote:
    Hi 2tonpickup,
    I understand your concerns regarding your son's phone. We also value your time and have different processes in place to troubleshoot any issues with your phones. Please keep in mind that this is a peer to peer forum and while our Social Media Team monitors these forums the best way to get assistance troubleshooting a device is to call us at 800-922-0204 from a different phone and have the faulty device fully charged and available when calling.
    Your device includes a one year manufacturer's warranty and we'll be happy to replace it with a Certified Like New unit of the same model if we are unable to resolve your concerns and phone is under warranty. Please visit this LINK for replacement process details.
    To the original poster: Please keep in mind that the Verizon employees are moderators, meaning that they mostly make sure we abide by the rules and regulations of the forums. While they do chime in occationally to help, your best bet is really to call tech support first or to go into a Verizon store.

  • Help with update to 2.3

    can anyone help with my x10 im unable to update to android 2.3 my phone just says you already have the latest softwere!!!! its driving me insane...

    Unfortunately that generally means that the network/country that your handset was manufactured for has not yet passed approval on the 2.3 update. With this being the case there is little that I can advise you do to resolve this until acceptance has been passed on this update.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Help with Update task

    Hi friends,
    In the below am trying to update a custom table using a call function in update task. I dont see the table getting updated can someone take a look at it and let me knw what the problem is? I have the commit work statement and also marked the function module as an update one in the attribute. Please help me . Thanks in advance! kathy
    *&  Include           ZINBOUND_TEST
    Report: ZINBOUND_TEST.
    DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
          l_unit     TYPE REF TO if_trfc_unit_inbound,
          l_inb_dest TYPE bgrfc_main_i_dst,
          lv_matid TYPE /sapapo/matid,
          lv_matnr TYPE /sapapo/matnr,
          lv_maktx type /SAPAPO/MAKTX,
          lv_langu  TYPE LANGU.
    data: lt_product type  STANDARD TABLE OF ZUPDATE,
          ls_product type ZUPDATE.
    lv_matid = '123'.
    lv_langu = 'E'.
    lv_maktx = 'Materia1'.
    CALL FUNCTION 'Z_TEST' IN UPDATE TASK
      EXPORTING
        iv_matid = lv_matid
        iv_maktx = lv_maktx
        iv_langu = lv_langu .
    COMMIT WORK.
    select * from zupdate into corresponding fields OF TABLE lt_product.
    if sy-subrc <> 0.
      write 'no records added'.
    else.
      loop at lt_product into ls_product.
        write: / ls_product-MATID,
                 ls_product-MAKTX.
      endloop.
    endif.
    FUNCTION Z_TEST.
    *"*"Update Function Module:
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(IV_MATID) TYPE  /SAPAPO/MATID
    *"     VALUE(IV_MAKTX) TYPE  /SAPAPO/MAKTX
    *"     VALUE(IV_LANGU) TYPE  LANGU
    data: itab type standard table of zupdate,
    wa_itab type zupdate.
    wa_itab-matid = iv_matid.
    wa_itab-maktx = iv_maktx.
    wa_itab-langu = iv_langu.
    append wa_itab to itab.
    update zupdate from table itab .
    ENDFUNCTION.
    Edited by: ka reddy on Sep 24, 2009 4:14 PM
    Edited by: ka reddy on Sep 24, 2009 4:15 PM
    Edited by: ka reddy on Sep 24, 2009 4:16 PM
    Edited by: ka reddy on Sep 24, 2009 4:17 PM
    Edited by: ka reddy on Sep 24, 2009 4:21 PM

    Hey Naimesh thanks for the reply. yeah i read that document way before and i started taking a stab at implementing it.
    I started with update task to see how it behaves and then wanted to go with BGRFC tats when i had the update issue.
    Now that am done with update i want to implement BGRFC.
    I have modified the earlier prgm...Can you give me some ideas how to extend this? Thanks!
    *&  Include           ZBGRFC_INBOUND_TEST
    Report: ZBGRFC_INBOUND_TEST.
    DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
          l_unit     TYPE REF TO if_trfc_unit_inbound,
          l_inb_dest TYPE bgrfc_main_i_dst,
          lv_matid TYPE /sapapo/matid,
          lv_matnr TYPE /sapapo/matnr,
          lv_maktx type /SAPAPO/MAKTX,
          lv_matid1 TYPE /sapapo/matid,
          lv_matnr1 TYPE /sapapo/matnr,
          lv_maktx1 type /SAPAPO/MAKTX,
          lv_langu1  TYPE LANGU,
          lv_langu  TYPE LANGU.
    data: lt_product type  STANDARD TABLE OF ZUPDATE,
          ls_product type ZUPDATE.
    lv_matid = '125'.
    lv_langu = 'E'.
    lv_maktx = 'Materia3'.
    **--Get the inbound destination for BGRFC.
      IF l_inb_dest IS INITIAL.
          SELECT SINGLE * FROM bgrfc_main_i_dst INTO l_inb_dest.
        ENDIF.
        l_dest = cl_bgrfc_destination_inbound=>create( l_inb_dest-destination ).
        l_unit = l_dest->create_trfc_unit( ).
    CALL FUNCTION 'Z_TEST' IN BACKGROUND UNIT l_unit
      EXPORTING
        iv_matid = lv_matid
        iv_maktx = lv_maktx
        iv_langu = lv_langu .
    select * from zupdate into corresponding fields OF TABLE lt_product.
    if sy-subrc <> 0.
      write 'no records added'.
    else.
      loop at lt_product into ls_product.
        write: / ls_product-MATID,
                 ls_product-MAKTX.
      endloop.
    endif.
    Edited by: ka reddy on Sep 24, 2009 5:16 PM

  • Help with custom page size support for non standard paper

    Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
    To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
    We have tried a number of drivers / printer personalities with varying levels of success:
    ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
    ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
    Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
    Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
    Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
    There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
    Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
    The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
    Q2: Are we heading in the right direction or is there a better way to handle this ?
    Q3: Would 10.5 solve all our problems, are the print drivers any better ?
    Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
    Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
    Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
    Sorry for the long / complicated post and thanks in advance for any advice / assistance.

    Matt Broughton wrote:
    Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
    The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
    After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
    but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
    Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
    I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
    I added the following lines to the Epson 9-pin PPD 1.3--
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *ImageableArea Label1/Label1: "0 0 288.00 107.80"
    *PaperDimension Label1/Label1: "288.00 107.80"</pre>
    This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
    The full diff in context is--
    <pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
    --- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
    +++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
    @@ -42,6 +42,7 @@
    *PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
    *PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
    *PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
    +*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *CloseUI: *PageSize
    *OpenUI *PageRegion/Media Size: PickOne
    *OrderDependency: 10 AnySetup *PageRegion
    @@ -50,17 +51,20 @@
    *PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
    *PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
    *PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
    +*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
    *CloseUI: *PageRegion
    *DefaultImageableArea: Letter
    *ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
    *ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
    *ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
    *ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
    +*ImageableArea Label1/Label1: "0 0 288.00 107.80"
    *DefaultPaperDimension: Letter
    *PaperDimension Letter/US Letter: "612.00 792.00"
    *PaperDimension Legal/US Legal: "612.00 1008.00"
    *PaperDimension A4/A4: "595.00 842.00"
    *PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
    +*PaperDimension Label1/Label1: "288.00 107.80"
    *MaxMediaWidth: "1080.00"
    *MaxMediaHeight: "86400.00"
    *HWMargins: 18.00 18.00 18.00 18.00</pre>
    I don't know if that will help you or not. Let us know what sort of progress you make.
    Matt

  • Help with Update failure please

    I have Adobe Photoshop CC running on win 7 64 bit. When doing the latest batch of updates one keeps failing with the error message "Adobe CSXS Infrastructure 4 Installation Failed Error Code U44M1P7" Can anyone help with this?

    Thanks Eshant
    I had since  been researching this on the web and it seems it is a very
    common fault which has not always been fixed by the full re-install
    advocated by Adobe in the link you kindly provided. I therefore decided
    to keep trying for a couple of days before resorting to such a drastic
    solution.
    After several failures to get CSXS Infrastructure 4 to install, both via
    the CC Desktop App and from the "Help" menu within Photoshop CC, I had
    one more try this morning and this time it seems to have installed
    without a hitch. I have no idea why, as I have made no system changes,
    but for now I do seem to have solved the problem as my installation of
    Photoshop CC is now reporting that it is fully up to date.
    Thanks for your response.
    Pixellated

  • Help with updating the grid(CONNECT 4)

    Hi, this a small portion of my connect 4 game program. I have a problem with updating the grid. During the game, whenever I enter a column number for the first time, the program works properly. But when i try to give the same column for the second time, the chip falls in the same row instead of going to the second row. Can anybody help me write the method that will do this.
    This is the method that switches the chip's value(By the way discard the variable 'turn' because that works properly, it is used in another method):
        //Method 2: Updates the matrix
        public static void UpdateMatrix (char location, char turn)
            c.println (location);
            switch (location)
                case '1':
                    matrix [5] [0] = turn;
                    break;
                case '2':
                    matrix [5] [1] = turn;
                    break;
                case '3':
                    matrix [5] [2] = turn;
                    break;
                case '4':
                    matrix [5] [3] = turn;
                    break;
                case '5':
                    matrix [5] [4] = turn;
                    break;
                case '6':
                    matrix [5] [5] = turn;
                    break;
                case '7':
                    matrix [5] [6] = turn;
                    break;
        } //End Method 2Can anybody describe me how to write a method or write a method that will tell the computer to assign the chip to the next row. You an edit my method if u want to. THANX A LOT!!!

    HERE IS THE METHODS SO FAR!
        //Method 3: Checks if assigned place for the chip has a chip there already
        public static void emptyspot (int column, int row)
            for (row = 5 ; row >= 0 ; row--)
                for (column = 0 ; column <= 6 ; column++)
                    if (matrix [row] [column] == 'X' || matrix [row] [column] == 'O')
                        row--;
        }I AM GETTING AN ERROR!!! AT THE BOTTOM OF MY PROGRAM! SOMEBODY HELP!
    Message was edited by:
    Taufiq

  • Help with dynamic page layouts

    Hello JSP Gurus,
    I'm attempting to dynamically generate the page layout for my site based on the organization a user belongs to. Basically, I'd have certain resources like navigation links, graphics, etc, that are modular. Then I'd like to construct the layout using these "moduls" in a dynamic fashion. Does anyone have any suggestions on techniques or technologies that would be useful? I'm not really looking at the portal/portlet model. Is this something that Cocoon could do by storing the layout for each customer as an XML file or something? Any ideas, suggestions, experiences would be helpful.
    Thanks!

    How does Tiles differ from the JetSpeed apache
    project? They both appear to be portal-like
    frameworks, or am I incorrect about that? Which is
    preferred?Frankly, I can't give you an in-depth answer to that. Maybe someone else can help with more details.
    What I can tell you is that JetSpeed seems to be more of a real portal architecture. Emphasis is placed on the framework portion, interfacing with exisiting applications. Visual layout takes second seat to this.
    Tiles on the other hand puts more emphasis on visual layout and reuse.
    Just looking at JetSpeed's visual interfacing a little bit makes me really dislike it. You build tables and such inside of a servlet, so there's a tight coupling (or at least, much tighter than with Struts/Tiles) between the presentation and logic. (I'm basing this on a JavaWorld article at
    http://www.javaworld.com/javaworld/jw-07-2001/jw-0727-jetspeed.html )
    Based on your initial question, it would seem to me that tiles is much closer to what you're looking for (and likely easier to just pick up and use).
    Anyway, take all this with a grain of salt; I'm not exactly an expert on JetSpeed. =)

  • I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

    i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

    If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

  • Help with update statement

    Create table temp_sibs as
    (select 1701 sib_1, 1702 sib_2 from dual
    union all
    select 1171,1172 from dual
    union all
    select 1701,1172 from dual
    union all
    select 1171,1174 from dual
    union all
    select 1173,1176 from dual
    union all
    select 2001,2004 from dual
    union all
    select 2001,2006 from dual
    union all
    select 2002,2006
    from dual)
    create table temp_sib_data as
    (select 111 pid, 1701 sibid, 5 amt from dual
    union all
    select 111 pid, 1176 sibid, 5 from dual
    union all
    select 222 pid, 2006 sibid, 5 from dual
    union all
    select 333 pid, 2001 sibid, 5 from dual
    union all
    select 333 pid, 2002 sibid, 5 from dual
    union all
    select 333 pid, 1171 sibid, 5 from dual
    First table is a lookup table that defines relationships sib_1 is related to sib_2
    Second table consists of a column pid and column sibid which is either sib_1 or sib_2
    The user would pass parameter pid and sibid and I want to update all the related rows with any matching sibid to 0.
    It is like 1701 matches with 1702 and 1701 matches with 1174 so indirectly 1701 and 1174 match...and 1171 matches because
    1171 matches with 1174
    so all 1701,1702,1171,1172, 1173,1174,1176 match (indirectly with each other)
    So for example if the user passes 333 pid and 2001 rows with 333,2001 and 333,2002 should update the amt to 0
    and if the user passes 111 and 1176 than 1st 2 rows should be updated to 0.

    Hi,
    try this:
    DEFINE PID='333'
    DEFINE sibid='2001'
    -- SELECT is only for test.
    -- Replace SELECT with: UPDATE TEMP_SIB_DATA SET AMT = 0
    SELECT * FROM TEMP_SIB_DATA  
    WHERE  PID = &PID   AND  SIBID IN (
           WITH TEMP AS(
                SELECT SIB_1, SIB_2 FROM TEMP_SIBS
                   START WITH     SIB_1 = &&SIBID   OR  SIB_2 = &&SIBID
                   CONNECT BY NOCYCLE      PRIOR SIB_2 = SIB_1  
                                       OR  PRIOR SIB_1 = SIB_2  
                                       OR  SIB_2 = PRIOR SIB_2  
                                       OR  SIB_1 = PRIOR SIB_1
            SELECT SIB_1 FROM TEMP
            UNION ALL
            SELECT SIB_2 FROM TEMP
    );For pid=333 and sibid=2001 it returns desired records for update:
    PID                    SIBID                  AMT                   
    333                    2001                   5
    333                    2002                   5For pid=111 and=1176 it returns one row - 1176 matches only with 1173 and 1173 doesn't match with any other rows,
    so only 5th row, not first 2, should be updated ... maybe I missed something ?
    PID                    SIBID                  AMT
    111                    1176                   5

Maybe you are looking for

  • Software update doesn't get updates

    hi again all.. this intel mac is making me a full time support forum visiter. this time when i go to software update..... it just stays in the "checking for new software" mode......never finishes. why me?

  • PO wise payment required

    Hi I made payment for 3 MIRO documents together. From which TCode i can get report where i can link payment to my Purchase Order

  • Migration Assistant -- Not Finding Users?

    Had to re-install 10.4.7 from install disks on my mam's 1.83 GHz dual-core iMac (Erase and Install). Carbon Copy Cloned the original start-up disk to an external FireWire drive. After installation, Mig. Asst. gave me the option to "Transfer from Anot

  • Why fn:current-date()/fn:current-time() return incorrect time in OSB 11gR1?

    +system: Oracle Service Bus Version: [Oracle Service Bus Server Side Dependencies 11.1 Fri Mar 19 01:02:35 EDT 2010 ], Oracle Weblogic Server Version: [WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 ] on my local machine (localhost), wi

  • Processing Status in Travel Request ESS

    Dear all Gurus, I am implementing travel request approval process on ESS/MSS. After employee submits an travel request via ESS the processing status is set to have 'Released for Approval' status. Once manager approves the travel requests via MSS proc