Help with updating to 10.5 from 10.3 and getting "invalid signature" error

I am trying to update to iTunes 10.5 so I can sync my new iPhone 4s but I keep getting the error message "invalid signature". I have tried turning off firewall and antivirus as suggested on this forum to no avail. Also going through Tools, Download only produced the same error. Any Suggestions?

I, too, am unable to update to iTunes 10.5 (iPhone 4) OR Safari. Contunally get "Invalid Signature" messages. I have "changed" each Apple, iTunes and Safari application through Add/Change Programs to no avail. I am forwarned removing iTunes from my PC will cause me to lose all my music. Any suggestions?

Similar Messages

Trying to update to itunes 11.1 getting invalid signature error message

getting invalid signature error message when trying to upgrade itunes 11.1...help me please?

iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
 Cheers, Tom

Problem updating itunes, keep getting invalid signature error message!!

Trying to update my itunes to latest version, keep getting "itunes has invalid signature" error message, any ideas of how to remedy this?
Many thanks in advance.
Meerkat68

I've had this problem for awhile in Windows XP SP3. Last night, the simplest thing occurred to me...here's what I did (and I'm telling because it worked).
1. Clicked on Start
2. Clicked on Control Panel
3. Chose Add/Remove Programs
4. Found Apple Software Updater and clicked Remove, then responded Yes
5. Went to apple.com and clicked on Support, and then Downloads
6. Downloaded the latest version of Safari ONLY
7. Installed Safari (knowing it would install the latest version of Apple Software Update)
8. AFTER the installation was complete, I clicked again on Start, then All Programs
9. then, clicked on Apple Software Update

Attempting to install iTunes Version 10.5 and getting Invalid Signature. Can someone please help???

I am attempting to install iTunes Version 10.5. I am getting the following messages...
"Files shared by these updates" has an invalid signature. It will not be installed.
"iTunes" has an invalid signature. It will not be installed.
"Safari 5" has an invalid signature. It will not be installed.
I somehow got around this annoying "invalid signature" problem before by installing the iTunes update through the Apple site.
http://www.apple.com/itunes/download/
When I tried that, now I get...
"The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to Exit"
All this to get the latest iPhone software. And every blessed time I go to Sync my iPhone, I run into iTunes issue on my Dell PC here. I guess PC and Mac just cannot play well together.
Can someone PLEASE help me out here???
Thanks in advance for your help.
PSULionRP

Hi. I also had this problem when trying to connect a new iPhone 4S & it needed iTunes 10.5. Went to the Apple website as update section of iTunes was not getting any luck - went to downloads section of Apple website & downloaded the whole iTunes 10.5 program as though I did not have it in the first place (& also downloaded the programs for Quicktime 7.7.1 & Safari 4.0.3) ie not just the upgrades. I created a restore point in my Windows XP in case it all went pear shaped & then went ahead & installed all 3 programs. Opened iTunes at the end & all my music, apps, movies were all still there & now the new iPhone 4S works perfectly with the iTunes. Hope this helps.

I am getting "invalid signature" error when i try updating itunes. How do I fix?

I received a notice that an update was available for itunes. I went through the installation
process and then near the end an error message came up telling me that it would not be installed
because of an invalid signature I tried doing this again only manual this time and the same thing happened.
I have never had this happen before. What is the problem? How do I fix?
Thanks, JKay

Twanger317,
Have you tried to do a repair install on the pc of iTunes? Also if that does not work i would follow these instructions on removing iTunes and reinstall. http://support.apple.com/kb/HT1923 for windows vista and 7 and http://support.apple.com/kb/HT1925 for windows xp. let me know if that helps.

I keep getting invalid signature when trying to upgrade to 10.5 from 10.4.1.10

I've tried to install 10.5 numerous times and keep getting "invalid signature" error even after doing the suggested Apple Software Update 'repair' as well as doing the download and running the install manually.
I now have updates piling up on my iPad2 as I can't sync to install ios5....................... Not happy!

Click here and download the software. Unless otherwise noted, a device running iOS 6 requires at least Mac OS X 10.5.8 and iTunes 10.6.3 to be synced from a Mac.
(78390)

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/

Help with Update task

Hi friends,
In the below am trying to update a custom table using a call function in update task. I dont see the table getting updated can someone take a look at it and let me knw what the problem is? I have the commit work statement and also marked the function module as an update one in the attribute. Please help me . Thanks in advance! kathy
*& Include           ZINBOUND_TEST
Report: ZINBOUND_TEST.
DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
      l_unit     TYPE REF TO if_trfc_unit_inbound,
      l_inb_dest TYPE bgrfc_main_i_dst,
      lv_matid TYPE /sapapo/matid,
      lv_matnr TYPE /sapapo/matnr,
      lv_maktx type /SAPAPO/MAKTX,
      lv_langu TYPE LANGU.
data: lt_product type STANDARD TABLE OF ZUPDATE,
      ls_product type ZUPDATE.
lv_matid = '123'.
lv_langu = 'E'.
lv_maktx = 'Materia1'.
CALL FUNCTION 'Z_TEST' IN UPDATE TASK
EXPORTING
    iv_matid = lv_matid
    iv_maktx = lv_maktx
    iv_langu = lv_langu .
COMMIT WORK.
select * from zupdate into corresponding fields OF TABLE lt_product.
if sy-subrc <> 0.
write 'no records added'.
else.
loop at lt_product into ls_product.
    write: / ls_product-MATID,
             ls_product-MAKTX.
endloop.
endif.
FUNCTION Z_TEST.
*"*"Update Function Module:
*"*"Local Interface:
*" IMPORTING
*"     VALUE(IV_MATID) TYPE /SAPAPO/MATID
*"     VALUE(IV_MAKTX) TYPE /SAPAPO/MAKTX
*"     VALUE(IV_LANGU) TYPE LANGU
data: itab type standard table of zupdate,
wa_itab type zupdate.
wa_itab-matid = iv_matid.
wa_itab-maktx = iv_maktx.
wa_itab-langu = iv_langu.
append wa_itab to itab.
update zupdate from table itab .
ENDFUNCTION.
Edited by: ka reddy on Sep 24, 2009 4:14 PM
Edited by: ka reddy on Sep 24, 2009 4:15 PM
Edited by: ka reddy on Sep 24, 2009 4:16 PM
Edited by: ka reddy on Sep 24, 2009 4:17 PM
Edited by: ka reddy on Sep 24, 2009 4:21 PM

Hey Naimesh thanks for the reply. yeah i read that document way before and i started taking a stab at implementing it.
I started with update task to see how it behaves and then wanted to go with BGRFC tats when i had the update issue.
Now that am done with update i want to implement BGRFC.
I have modified the earlier prgm...Can you give me some ideas how to extend this? Thanks!
*& Include           ZBGRFC_INBOUND_TEST
Report: ZBGRFC_INBOUND_TEST.
DATA: l_dest     TYPE REF TO if_bgrfc_destination_inbound,
      l_unit     TYPE REF TO if_trfc_unit_inbound,
      l_inb_dest TYPE bgrfc_main_i_dst,
      lv_matid TYPE /sapapo/matid,
      lv_matnr TYPE /sapapo/matnr,
      lv_maktx type /SAPAPO/MAKTX,
      lv_matid1 TYPE /sapapo/matid,
      lv_matnr1 TYPE /sapapo/matnr,
      lv_maktx1 type /SAPAPO/MAKTX,
      lv_langu1 TYPE LANGU,
      lv_langu TYPE LANGU.
data: lt_product type STANDARD TABLE OF ZUPDATE,
      ls_product type ZUPDATE.
lv_matid = '125'.
lv_langu = 'E'.
lv_maktx = 'Materia3'.
**--Get the inbound destination for BGRFC.
IF l_inb_dest IS INITIAL.
      SELECT SINGLE * FROM bgrfc_main_i_dst INTO l_inb_dest.
    ENDIF.
    l_dest = cl_bgrfc_destination_inbound=>create( l_inb_dest-destination ).
    l_unit = l_dest->create_trfc_unit( ).
CALL FUNCTION 'Z_TEST' IN BACKGROUND UNIT l_unit
EXPORTING
    iv_matid = lv_matid
    iv_maktx = lv_maktx
    iv_langu = lv_langu .
select * from zupdate into corresponding fields OF TABLE lt_product.
if sy-subrc <> 0.
write 'no records added'.
else.
loop at lt_product into ls_product.
    write: / ls_product-MATID,
             ls_product-MAKTX.
endloop.
endif.
Edited by: ka reddy on Sep 24, 2009 5:16 PM

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

Hello-
Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now." although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available. Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now." If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash? Does it come in an email?
Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash? (The way before this icon was added to System Preferences)?
I would appreciate help with updating Flash to the most recent version. I used to uninstall the older version, restart the browser and download the most recent version and install it. It always worked find but this was before there was an Adobe icon in my system Preferences.

Hello,
The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed. Uninstalling shouldn't be required, but it definitely doesn't hurt. If you feel comfortable doing it the old way, please feel free to continue using that process.
As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released. This usually occurs when the browser loads swf content. Clicking the button will, like you mention, immediately check. Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
Is there a way to be automatically notified when a new Flash Runtime release is made?
Thanks,
Chris

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

HT1338 tried to update 10.7.4 to 10.7.5 get un expected error at cleanup....have tried several times with no success..after failed try mail will not open because the mail is now incompatible with 10.7.4......HELP

tried to update 10.7.4 to 10.7.5 get un expected error at cleanup....have tried several times with no success..after failed try mail will not open because the mail is now incompatible with 10.7.4......HELP

2009 MacBook Pro eh? It looks like your hard drive has failed. Three years is pretty standard. Often, then only hint you have is catastrophic failure.
If you put the old hard drive into an external enclosure or similar device, you may still be able to migrate your data from it. Just because it won't boot doesn't mean you can't still read from it. Still, I wouldn't keep trying it. As long as you are buying a new hard drive, may as well get sometime to use with Time Machine too.

Can anyone help me with lightroom 5 - download photos from hard drive and develop on a MAC

Can anyone help me with lightroom 5 - download photos from hard drive and develop on a MAC@
I have not used this forum before and trying to find my way to assistance with developing photos in Lightroom 5 on a Mac. Have imported the photos from the folder, but cannot open them in the develop module, as the develop module does not show! Newsgroup_User

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Help with updating to 10.5 from 10.3 and getting "invalid signature" error

Similar Messages

Maybe you are looking for