Help with Usb Audio interface

Hey guys, just having major issues setting up my recording software to work in boot camp my usb audiophile seems to be connecting and functioning with Windows 7 but the audio quality is really poor with distortion, i have seen that this is a regular problem and would much appreciate a solution or a link to one that would be a great help
my set up is a imac running 0s x version 10.6.8 with boot camp running windows 7 32 bit the Usb interface is the M-audio Audiophile
Thanks

GT Player Express is a real-time standalone application allowing to use your computer at studio or on the stage as powerful guitar multi effect processor. It offers ReWire support, for connecting to ReWire applications such as Live or Reason. Track Recording support allows recording of the processed or clean sound. Recorded tracks are automatically added to the current playlist. GT Player is functional as a VST plug-in which can be used in all VST host applications such as Nuendo, Cubase, Live, DSP Quattro, Spark, etc. With Keyboard Transpose, MIDI notes can be triggered from your computer keyboard with transpose capability.
According what I read, this app is VST only, so it won't work with GB, sorry. GB uses AU (Audio Units) and not VST.

Similar Messages

Help with M-Audio interface and GB

First time with any kind of audio interface and GB. I just got a M-Audio Mobile Pre USB and am a little confused by the monitor settings. Been to the web site and read the manual and they said turn the monitoring off in garageband so I don't hear double monitoring. My question is, is it possible to record and hear the effect I have chosen as well. With monitor off all I can hear is the dry signal.I never had to worry about this before since I was going directly into the Mac, no interface. Is there a FAQ or web site that can help a newb like me with these most basic questions?

Sounds like good advice Christoph. I have been only recording bass thus far, very few effects and no latency yet. I was puzzled by the M-Audio manual that says to turn off the software monitor but on the M-Audio web site forum an expert says to turn on the monitoring in garageband. This will all makes sense to me soon I hope.

Constant clicking/popping with USB audio interface (scarlett 2i1)

Hi, I'm having a very frustrating issue with my audio. for the time being I have just decided not to use any audio (which is absurd). I have had this problem with Arch, Mint, Ubuntu, Fedora, etc...
My audio interface is a Focusrite Scarlett 2i2, and I cannot get it to stop making popping noises. Initially, it would only do it when I would open an application (regardless of whether that application relies on audio), move back and forward in my browser, etc. Anything that makes the computer work. Right now, it is popping every 1/2 second, probably because dd is cloning a hd right now. Possibly related, qjackctl has started saying it can't connect to JACK server, I'm pretty sure it worked when I first installed it (it tells me "ALSA: cannot open PCM device alsa_pcm for playback.
I have tried the following:
-ediitng asound.conf with various suggestions online for others that have had this issue - changing sample rates etc... unfortunately none of them are using the same interface so I don't think they apply to me. I don't really know what most of the things in these files mean, otherwise I would probably be able to configure it properly.
-blacklisting every other sound card in my computer
-adding a .asoundrc file as suggested here:
-tried to view information on my sound card with lsusb -v, but I don't know how to pinpoint the sound card so the list is too long for me to scroll all the way to the top (I typically have 12 to 14 usb devices plugged into this computer)
I mainly use OS X, but I would like to use Linux for music production as well; obviously this has made it impossible. Again, this has happened with every distro I have tried.
Please help, this has basically made Linux unusable for anything other than very basic internet browsing. I'm using gnome-shell and linux-rt kernel.
Last edited by jamiethemorris (2012-08-26 12:58:24)

I have precisely the same problem.
Did you find a solution or, at least, somenthing usefull?

Frequent dropouts/clicks with USB Audio Interface

I am using a Toneport UX2 Audio interface (USB) that worked flawlessly with my PM G5. Now on my macbok pro, I get random, about every minute or so, droupouts or clicks in audio. It happens in any audio on the machine. Played in any software, itunes, dvd player, internet sources, etc. Its the same stutter on each source. Line6 support, as well as some other internet forums blame this on the USB chipset of the 15 inch MBP. They say that the data transfer rate is inconsistent and as a result i hear the click when the transfer rate drops. This is something that wouldnt be noticed in a printer or other USB device because its not dependent on a steady stream of data. But I hear the frustrating click in all its glory on every audio source. Both USB ports are effected. The Toneport is connected direct into the MBP (no hub). All the latest drivers/updates are installed. Please someone help me!!! Thanks...

I have a similar discussion in because of my audio interface, I have called Apple about it. Check the discussion here:
http://discussions.apple.com/thread.jspa?threadID=756998&tstart=0
Macbook pro core2duo Mac OS X (10.4.8)

Problems with USB Audio Interface

My Behringer mixing board came with a USB Interface so I can out put the audio from the board into my laptop via USB. The trick is though Logic recognizes it and I can record say microphone audio from the board on Logic, I cannot hear the tracks that already on Logic. For instance, say I want to record a vocal track onto something I have created on Logic. Logic will let me record the microphone vocal but it won't allow me to hear the track, rendering it useless. It is a very simple USB interface and I have been thinking of upgrading but I am wondering if it something I am doing wrong on Logic. Any thoughts?
Ken

when you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface.

Can't hear playback with USB audio interface plugged in

I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda. If I unplug Lambda I can hear playback from mac just fine thru speakers or headphones.
Very appreciative of any advice on how to solve this.
Thanks.

berkleyrob wrote:
I start Logic Pro 8 and then plug in Lexicon Lambda for a USB interface between guitar and macbook pro. With the Lambda plugged in I hear nothing from mac or headphone input on Lambda.
Unplug your audio interface, reboot the Mac, plug the USB interface in, let it be recognized. Open Audio/MIDI Setup (in utilities) see if the Lambda shows up as an input and output device.
Yes/No?
If yes, you don't have to select if for any of the Input/Outputs, Logic's audio interface selection operates independently from the system.
Open Logic go to "Preferences/Audio) select the Lexicon or Lambda interface as the default unit, set audio buffers to 256.
Anything yet.
All audio I/O will be coming from the lexicon the Mac's audio system is now out of the equation.
pancenter-

Help with my audio interface

i use an usb yamaha audiogram6 interface on my MacBook Pro it works good, but i have the problem that if i plugged my guitar it sound everytime and i keep listen it even if im using guitar amps on logic pro i listen the clean sound from the guitar and the guitar amp on the back i want to listen the guitar or mic only if i chose monitoring on logic

I'm experiencing similar problems with 10.5.6. My edirol ua-25 has now stopped working (i.e. is not recognized and does not power up). I have been using the ua-25 forever on a 1st gen black macbook, and have had no problems. I tried updating to the latest drivers for the ua, but no luck.. any ideas?

How will the usb audio interface will be working again

I have been using my G72-C55DX Notebook PC to record music suddenly it fails to record with usb audio interface and I have tried all efforts to fix the problem but it doesn't work.

Hi ketpiano!
I have an article here for you that may help you resolve this issue:
Macintosh: Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743
Thanks for using the Apple Support Communities!
Cheers,
Braden

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

USB Audio Interface with bad latency problems under bootcamp

Hi everyone,
I am currently running an Edirol UA-25 USB audio interface under Mac OS X for my normal music-listening needs. Everything works fine, and there is next to no latency when messing around in Garageband .
However, when I switch into bootcamp to use Cubase SX 3 for audio production and sequencing (has all my windows-only VST instruments), the interface pops and crackles extremely. It's almost as if the USB interface is losing sync..?
When I turn the buffer up on the drivers, this stops, but it is annoying as I like to have low latency when recording for direct monitoring.
Can anyone give me any insight into why this might be happening?
I know this is an audiophile-type question, but I thought I might as well give it a go. Or heck, if you wanna direct me somewhere where they might be able to help me!
Cheers!
Chris
P.S. Using a MBP 2.5GHZ 2GB RAM

when you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface.

Live Capture with a camera via firewire and usb audio interface

I am trying to do a live capture through Final Cut 7.
I want the video feed through the firewire from my HVX200 and the audio feed from a 4 channel usb audio interface (Alesis iO4).
When I have both audio and video input coming in from the HVX200, the live capture works fine.
However, when I change the audio input so that it is coming from the usb audio interface, final cut has an error message saying "Video is not available."
During the preview, I see the video clearly and am getting levels from the iO4.
But when I try to capture, I get the error message.
Is it a processor issue (I've attached my specs below) with problems handling 2 separate inputs?
I'm not quite sure what the problem is.
Any input is greatly appreciated.
Thanks!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,3
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz

Hi MtD,
Yes I am changing the Capture preset to iO4. Once that happens, it lets me run both the camera and the iO4 into the laptop but then an error message pops up the moment I try to capture it.
I was only trying to use 3 out of the 4 channels of the iO4.
Thanks!

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

Can i use my usb audio interface with apple tv? For example Focusrite 2i2

can i use my usb audio interface with apple tv? For example Focusrite 2i2

Afraid not - AppleTV does not support USB audio devices.
I assume you don't mean using the device as an optical input for the computer, connecting AppleTV's optical out to it.

Will Garageband on an IMAC with OS 10.7 work with a Tascam us-600 USB audio interface

I need a USB audio interface to read in DAT tapes from a Tascam DA20 recorder. I want to use the S/PDIF digital output from the recorder. Has anyone used the Tascam US-600 with the IMAC and Garageband? Any other recommendations for a USB interface that will accommodate S/PDIF as well as XLR Mic inputs for under $200?

Been there, done that.
I can select the device (US-144), but I do not get any choice for the output channel. The default is to go the analog channel ( channels 1 and 2).
However - I did find a workaround. There is an opensource package called Soundflower:
http://code.google.com/p/soundflower/
From the description:
"Soundflower is a MacOS system extension that allows applications to pass audio to other applications. Soundflower is easy to use, it simply presents itself as an audio device, allowing any audio application to send and receive audio with no other support needed."
This allows me to set the output channel for garage band (and any other app, e.g. itunes) to the digital S/PDIF output.
It would be nice if this functionality was built in to Mac OS X...
Warren

Audio input setup with a USB audio interface

When i plug my USB audio interface into the USB port, GB gives me a message that it has been detected, and it shows up in the audio input preferences.
But it doesn't seem to be listening. Signals light up on the interface when i speak into the mike, but not on my GB.
I also switched to the device I'm using in my Mac input sound preferences.
Hints, anyone?

Nothing - it's a new project. Thought maybe I ought to get the input device working before starting.

Help with Usb Audio interface

Similar Messages

Maybe you are looking for