Help with USB Flash Drive

I am new to Arch and need some help with a usb flash drive. I have program the base system setup three times and I have got the same error message each time. Everything boots ok until it gets to mount the root device and that is when the error comes up. And yes I have done my homework and found that I need to change a file but I do not know which one and not sure how to.
I have learn more about Linux today than using it at work for over 5 years. Arch users have my highest respect for now I know why they love it so much. The reason I am working with the usb flash drive is I can not setup a hard drive right now for a couple of weeks and want to learn as much as possible before then.

Also, what homework led you to the conclusion that you needed to change a file. If you tell us where you learned this, we may be able to help with the process. If you want us to guess .... My guess would be that you should open /boot/vmlinuz-linux in a text editor and delete all the "7"'s.
(Kidding, hopefully obviously, don't do that).

Similar Messages

Trying to install win7 over bootcamp with usb flash drive is not accepted

trying to install win7 over bootcamp with usb flash drive, the partition is not accepted under windows although its formatted ntfs, there is shown a faillure which could be read in the logs of win install but i don't find them. Tried at least five times to reinstall / reformat

You'll probably have better responses over in the Boot Camp forum....here's a link for you:
https://discussions.apple.com/community/windows_software/boot_camp

Looking for All on one with USB Flash Drive Print/Scan support

I am looking for an All in One Print/scan/copy. It should support print from USB Flash drive and scan to the same.
Thanks

Hi,
You may check the HP Officejet 6600/6700 models which support USB Flash drivers.
You may find the flash driver specifications listed within the Memory Device specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03058896&cc=us&dlc=en&lang=en&lc=en&product=505...
As well you may check the HP Officejet 8600 Series which supports both USB Flash Driver and Memory cards, its specifications can be located below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lang=en&lc=en&product=432...
Both of the products above provide Print, Scan, Copy and Fax functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Problem with USB Flash Drive

I bought a 1 GB USB flash drive from Walmart. When I went to backup some pictures onto it, I got a whirling rainbow ball & nothing worked. Coincidentally, it worked fine on a PC laptop.

Sounds like it's one of the following. Only the last one claims any kind of Mac OS compatibility, although I'd think it would use a standard protocol that would be accessed by generic drivers that should be in the OS. It's probably something other than the drivers if you can see it in Disk Utility but can't seem to format it.
http://www.retailplus.com/productsfeature.php?productId=83
http://www.retailplus.com/productsfeature.php?productId=85
http://www.retailplus.com/productsfeature.php?productId=93
I'd suggest maybe taking it to an Apple Store, but I think the cost of the fuel and ferry ride would cost considerably more than just purchasing a different one. A SanDisk Cruzer micro works fine in any machine I've tried. I'd be surprised if you couldn't fine a 1GB version for under $20 on sale somewhere near you.

Help with my flash drive

i dont know how to copy things onto my flash drive also i dont know how to remove the flash drive from the mac

I can probably help you troubleshoot this issue, however, this is the wrong forum for this question. This is the LiveType forum.
You should post this question in the Leopard forum, or the specific forum for your particular hardware (MacBook, iMac, etc.)

Can you tell me how to use a USB Flash Drive

Not familiar with USB flash drive. Anyone tell me how it operates?

...but don't expect even close to the access speeds you would get with a hard drive! That's fine of course since you should use it for example, as an emergency boot drive, or transporting stuff to and from other locations, or backups for selected stuff.

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

USB Flash Drive Help

Hi gang,
I'm not sure if this is the correct place to ask this question, but it's the closest forum I could find.
I have an old iMac running Mac OS 8.6, and I need to transfer some files (Appleworks documents, and family pictures) from it to another iMac running OS 10.3.9. They are in different locations, with only dial-up internet access, so I can't transfer files over the internet (easily), or by an ethernet connection.
I have two USB flash drives. The first is an old 128 MB, USB 1.1 drive. The other is an 8 GB, USB 2.0 drive. Neither drive will work on the OS 8.6 machine. When I put the device in the USB port, I get a message:
+'The software needed to use the USB device "USB Drive" cannot be found. Please refer to the device documentation to install the necessary software.'+
The 128 MB drive is so old, I don't have any documentation. I tried looking on the website of the manufacturer for a drive, or something, (the flash drive says Fujifilm on it), but they don't have anything useful.
The 8 GB drive is newer, but didn't come with any instructions or installers (not that I was counting on it to work on this old machine). It's a Verbatim flash drive, and they didn't have any help there.
I tried re-formatting the 128 MB drive to Mac OS Standard. That didn't work. I tried formatting it in Mac OS Extended HFS+. That didn't work.
My question is this, is there a software extension that I could download, it can't be that large of a file for dial-up, that would allow me to use the flash drive on a computer using OS 8.6? I have an OS 9 CD, and I also have a back-up CD of OS 9.2.1. Is it possible there is a driver in the extensions folder there that I could transfer and use in OS 8.6?
I appreciate any and all help.
Thank you.
just a rambling joe

Hi, joe -
...I'm going to replace this iMac's 4GB hard drive with a slightly larger one...
If your iMac has a processor speed less than 350MHz, it is important that you partition the new drive if it is 8GB or larger -
Article #TA22193 - Gray or White Screen After Hard Drive Upgrade
Article #TA20420 - OSX: Disk Appears "Grayed Out" in Installer
...install OS 10.3.9 and OS 9.2...
Important - before attempting to install OSX be sure the firmware has been updated on the iMac; failure to do so can cause loss of video on early iMac models -
Article #HT1395 - Firmware Updates

Time Maching backup and USB flash drives problem with TC

I have a time capsule that is currently backing up my computer for the first time. I want to add a USB hub to the USB port so I can add my flash drives and setup a printer wirelessly. I plugged in one of my flash drives into the USB port and a folder popped up that was titled "NO NAME". Is there any reason why TC isn't recognizing this as a disk and letting me move files to/from the flash drive. Additionally, is there anyway to backup the day-to-day Time Machine files to the flash drives instead of to the TC, or would this not be recommended?
Thanks to all who can help!

I have successfully mounted a USB flash drive but had to first reformat and name it using Disk utility. I am also using a USB hub with an external 750G drive attached through the USB hub.

USB flash drive with G4, OS9.2

Just bought a 256Mb USB flash drive to help friend move data from old iMac to new core duo (lucky s*d). tried it first at home - works Ok on my eMac (10.4), but when plug it into my G4 (OS9.2), get the old 'this disc is unreadable, do you wish to initialise?) message (that takes me back a few years!). Should I format it? If so maybe it won't then work with my eMac. I think OS9 has a USB mass storage driver somewhere, but can't find it. Maybe that is the reason why G4 doesn't recognise the flash drive.
Any suggestions would be most welcome

Hi, John -
This User Tip (by Joerg Weiss) may help -
http://discussions.apple.com/thread.jspa?threadID=121944
Although that tip is directed towards other USB storage devices, the included list of needed extensions and their versions may also apply to your situation.

As a new MacBook user I plug in my USB Flash Drive but don't know how to access its contents. Please help. Thanks.

as a new MacBook user, when inserting my USB Flash Drive, I do not know how to access its contents. Please help. Thanks.

Open a new Finder window, Finder > File > New Finder Window, and it should appear on the left under Devices.
If you don't see it there, or to get it to show up on the Desktop: Finder > Preferences... General tab, check External disks to have it show on the Desktop, Or Sidebar tab, check External disks under DEVICES.

Hi, I have a late 2008 iMac with a new hard drive. How do I install Mountain Lion from my bootable USB flash drive.

How do I install Mountain Lion to a new hard drive without having the recovery partition on it.
I have the USB flash drive with software on it but when I switch my Mac on all I have is a white screen & a flashing question mark.
ATB,
Steve.

Did you use LionDiskMaker or DiskMaker X?
Boot the machine with the option key down until you see your bootable USB stick. Select the latter, and reboot.
When the installer boots up, you will first need to choose Utilities and Disk Utility. Select the target HD device name and then the partition tab. Select 1 partition, name it Macintosh HD. Format is Mac OS Extended, and option is GUID. Apply. Exit Disk Utility and return to the installer, which will now show your newly partitioned HD as available for install.
When OS X is installed and all updates applied, press shift+command+U and run disk utility again. Verify/repair permissions and verify the boot disk.

Trying to put pics on a flashdrive and keep getting error that there is not enough free space when there is. I tried to empty trash with the flash drive in but still not working. Help!

Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!

How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton

Can a USB flash drive be used with iPad?

I have a brand new Retina Display iPad. Is there any way to attack a USB flash drive to it?
Thanks,
Mary Alice

I read email attachements without WiFi just fine. I just download them before I have no network connectivity. If you took the trouble to, oh, read the manual or perhaps do a bit of research, you might find that you can do most of what you need to do with your iPad.

New Keyboard Not Compatible With All USB Flash Drives

Hi,
I've noticed that the new super-thin iMac keyboards are not compatible with all USB Flash Drives. Here's an example.
I have 2 USB Flash Drives. One is a ByteStor 2GB USB 2.0 High Speed Dataferry Flash Drive, the other is a Kingston DataTraveler 1GB USB 2.0 Flash Drive. Neither of these drives used to work with the previous design of iMac keyboard, giving me the "low power" warning.
However, the ByteStor works just fine with the new super-thin iMac keyboard, but oddly enough, the Kingston DataTraveler doesn't. Does anyone know why this is? What's the difference? When buying a new USB Flash Drive, how do you know if it's compatible with the new iMac keyboard or not?

Thanks. Yeah the Kingston DataTraveler works just fine if I plug it into one of the USB 2.0 ports on the back of the iMac. But if I plug it into the new thin Apple Keyboard, it gives the low power warning.
http://www.amazon.co.uk/Kingston-Technology-1GB-DataTraveler-Flash/dp/B000AV14M2 /ref=pdbbs2/203-9795812-0230310?ie=UTF8&s=electronics&qid=1187109154&sr=8-2
Anyway, I'll try that new keyboard software update and report back.

Help with USB Flash Drive

Similar Messages

Maybe you are looking for