Help with using iPhone 3GS on tiger 10.4.11?

I have seen other people using Tiger, but when i try to connect my iPhone 3GS to iTunes, i get an error saying that This iPhone cannot be used. Must have 10.5 or higher. Am I missing a driver or something? Others have claimed to have used Tiger.

Copied from this link.
http://www.apple.com/iphone/specs.html
+*Mac system requirements*+
+*Mac computer with USB 2.0 port*+
+*_Mac OS X v10.4.11 or later_*+
+iTunes 8.2 or later (free download from www.itunes.com/download)+
+iTunes Store account+
+Internet access+
What is the exact error message?
A potential problem may be if your Mac has USB 1.1 ports instead of USB 2.0 ports, and I believe it does. It may be possible to sync an iPhone via a USB 1.1 port but not without potential problems. USB 1.1 is not supported. USB 2.0 is supported.

Similar Messages

  • Can anyone help with my iphone 3gs activation?

    Hi, I am trying to get help with my iphone 3gs. It's not being activated.

    Find some place that will provide support for illegally unlocked phones, or if you decide that you don't want to do something illegal, get it unlocked legally, through the carrier it's locked to.

  • I need help with my iphone 3gs. It is disabled for 22 million mins.

    Hi there, My iphone 3gs is disabled for 22 million mins and that is like couple of years(i think) and i dnt think i can do that. I have tried connecting it to Itunes but it wont let me becaise it is disabled. PLZ help!!
    THANK YOU

    Copied from the article mentioned by wjosten: iOS: Wrong passcode results in red disabled screen
    If you don't have access to a computer
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    If you have previously synced your device with iTunes
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    If you have never synced your device with iTunes
    Connecting the device may result in this error message: "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

  • Hi i need help with my iphone 3gs

    hi i have been trying to access icloud on my iphone 3gs it is saying that the apple ID is valid but i have used my maximum free accounts dose anyone know how to over come this.

    r-slaughter wrote:
    i have had this trouble since i got the phone this year second hand
    Then the previous owner has already made all the accounts that are possible to make from that device.
    As KiltedTim says, you will have to use another Apple device to create an iCloud for yourself.
    Once you have created the account, you can use it on that device, but you cannot create any more accounts with that device, ever.

  • Help With my Iphone 3gs please.

    When i connect my iphone 3gs itunes comes up and says "Itunes could not connect to this iphone. an unknown error (0xE8000012)"

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Help with using Iphone with NEW computer

    I have a new computer and want to use my iphone with it. I dont have any songs on the new one and cannot transfer them however i can eventually rebuild my song list. What i want to know is when i sync my iphone to my new computer i no that means it will put whatevers in my library on it but when it comes to settings, applications, photos, sms messages what happens with those, will it just erase everything? Im just a little confused with everything.
    Help would be much appreciated! :-D thanks

    Yep... everything will be gone because the computer will think it's a new iPhone.
    You can download the applications from the AppStore again for free, but your music will be lost. Consider using an application like ifunbox to copy the music from your iPhone to the PC before installing iTunes.

  • I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

    I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

    Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
    Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

  • Using iPhone 3GS with Apple Universal Dock

    I want to get the Apple Universal Dock to use with my iPhone 3GS. The main purpose of this, at this time, is to hook up the iPhone to my living room speakers (computer speakers) to listen to music.
    I know I could just use a mini stereo cable to hook up the dock to the aux-in on the speakers, and then be able to control everything with remotes. However, this would require plugging and unplugging the cable each time so that if I wanted to switch to watch TV the speakers would output the correct audio. Sorry if that is confusing.
    The other option I'm thinking about is using the Apple Component AV Cable to hook up the dock to my TV, which outputs to the computer speakers, that way it could always stay connected and I can switch inputs with the remote. MY QUESTION IS WHAT WILL BE DISPLAYED ON THE TV IF I AM JUST USING THE IPHONE FOR MUSIC AND NOT VIDEOS? Will it show a visualizer like with iTunes, album artwork, nothing? Please answer from personal experience. Thank you for your help.

    iOlly wrote:
    MY QUESTION IS WHAT WILL BE DISPLAYED ON THE TV IF I AM JUST USING THE IPHONE FOR MUSIC AND NOT VIDEOS? Will it show a visualizer like with iTunes, album artwork, nothing?
    Nothing.

  • How to unmerge contacts with my husband's?  We're using iphone 3gs.

    How to unmerge contacts with my husband's?  We're using iphone 3gs.

    You got to have two different apple id

  • Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

    Dear Community,
    Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
    The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
    Please, I really need your kind assistance. I am ernestly waiting for responses.

    Dear Tim,
    I saw your message. Below are the problems:
    Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
    1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
    2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
    The above is the challenges I am facing now.

  • I use iphone 3GS, after upgared to ios5, my phone restart when i took picture with   button and while playing music .. what happened?

    I use iphone 3GS, after upgraded to ios5, my phone restart when i took picture with   button and while playing music .. what happened?

    Basic troubleshooting steps in the following order.
    1. Reset. Press and hold both Power and Home Buttons together till Apple Logo appears.
    2. Restore to a backup.
    3. Backup, Restore in iTunes and setup as new.

  • I am using iphone 3gs can it be support with icloud ?

    in november 2010 i buy mobileme ID so now it became free,
    and i am using iphone 3gs now it is showing not applicable with this device,
    so, what can i do now,
    my current ios is 4.3.3..

    You need to setup the account using the MobileMe ID you chose when signing up for the service.
    It will be in form of an @me.com email address e.g. [email protected]
    http://www.apple.com/mobileme/setup/iphone_ipod.html
    You can't setup a full MobileMe account using a different Apple ID, such as the one you may use for these forums or the iTunes Store.

  • Hi sir,,, I am using iPhone 3GS, Hi sir,,, I am using iPhone 3gs with 4.3.3

    Hi sir,,, I am using iPhone 3gs with 4.3.3 & I want to update my phone with 6, with out computer, is it possible or not, & one more thing, I don't whether my phone is jail broken or what.,,

    It isn't possible.
    (86520)

  • I am using iPhone 3GS. I am living in Saudi Arabia. I cannot find the directions with in GCC contries in the Navigation Application "COMPASS" of iphone. Can you please explain me how to work on it??

    I am using iPhone 3GS. I am living in Saudi Arabia. I cannot find the directions with in GCC contries in the Navigation Application "COMPASS" of iphone. Only the map is displayed. I am not gtting the directions or information when I use it. Can you please explain me how to work on it??

    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
    Add code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #context-sendlink {display:none !important;}</nowiki></pre>
    See also http://kb.mozillazine.org/Chrome_element_names_and_IDs

  • I am having trouble with my iphone 3GS,contact list andphone icon, Help Please

    I am having trouble with my iphone 3GS, when i select my contact list or the phone icon, they open with a white screen and close almost immidiately meaning that i am unable to call or save contacts however i can recieve calls. Help Me Please

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

Maybe you are looking for

  • Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

    Hello, I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup. The message that i see is Error: 1002097 Unable to load database [PlanType1] I have searched

  • Random freeze crasch an repeated warning sound on iMac OSX 10.6.8

    I have a one year old iMac intel Core i5 running on Mac OSX 10.6.8 It randomly freeze, crasch an gives a repeated warning sound. Very scary! Spoke to support and I have checked that the RAM are properly installed. Still crasch. I've also restored the

  • Send IDocs internally in a client

    Dear all, I am not sure if this really fits in this forum. But perhaps someone can help me. I need to send IDocs internally wihin a given client (inter company). So I created a port and a RFC connection pointing on the system itself. My problem is no

  • Error 25009 Install FIM Synchronization

    Hello, i try to install FIM Sync and i have a remote sql server but i have this error Product: Forefront Identity Manager Synchronization Service -- Error 25009.The Forefront Identity Manager Synchronization Service setup wizard cannot configure the

  • Join two 8 bit integers and send via Serial Port

    I am trying to join two 8 bit integers and send the result via the serial port. I have a constant of hex value A that I need to join with a value from hex 0 - F (this is based on incoming data) When I use the Join VI, and type cast to change from hex