Help with variable screen

Hi ,
I have some problem at the variable screen. When I click the possible entries for 0calmonth in the query selection screen and I could not able to see the possible entries. The screen comes blank. When I check for 0calday and ocalweek i get the possible entries.
I have checked the data inside the infoprovider and the data is available in it. I have tried activating the 0calmonth again. I have tried all the possible options. Please help as it is very urgent.
Regards
Raghu

Hi,
Probably for the selections given while entering the query, the 0calmonth might not have been present.
Check in the infoprovider with the same selection parameters you are initialling giving while running the query and c whether the calmonth is there or not?
Also once check infoprovder whether the 0calmonth is updating r not
***assign points if helpful******
Janardhan KUmar

Similar Messages

  • Problem with Variable screen in WAD

    Hi ,
    I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
    Thanks,
    Abraham

    Hi Abraham,
    thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
    - search for the infocube
    - doubleclick on the infocube
    - choose an specific infoobjekt
    - right mousebutton and click "specific dataprovider settings"
    - check if the right entries are set
    Hope this will help.
    André

  • F4 input help on Variable screen is not working on Portal

    Dear Experts,
    We are facing one issue when we run the WAD report on portal, variable screen gets hang after clicking on input help button (F4) for couple of variables. We are facing same issues when we run the base queries on portal. But when we run the same base queries in RSRT (Tcode) or in BEx Analyzer we are not facing this issue and able to get the input help screen with values.
    I also have gone through some old posts related to such issues but didn't help much. We are already on SAP BW 7.4 SP Level 008 and for Char IO Query Filter Value setting is kept as "Values in Master Data Table" only. This is a MD IO with Compounding.
    Kindly let me know if anyone has faced such issue.
    Thanks in Advance,
    Nilesh

    Dear Martin,
    There is a no long running work process in the backend and data volume is more in Master Data Table, there are around 19 Lacks records available.
    For BI Java patch and defaultTrace for errors I will check it with BASIS Admin team. Unfortunately I don’t have rights to do same.
    Thanks,
    Nilesh

  • F4 Input Help in Variable Screen takes about 30 Minutes to display.

    Hello Experts,
    We have a web-report in which the time taken to display all the entries in F4 Input Help of the variable screen takes about 30 minutes. Have anyone experienced so long a wait time while accessing F4 Input Help in the variable screen and is there anything that we can do to reduce this wait time.
    Thanks
    Arvind

    For BEx Web 7.0 make sure you have the attributes suppressed in help with the instructions from note below:
    https://service.sap.com/sap/support/notes/1144979
    Also apply the optimizations provided in the notes below:
    https://service.sap.com/sap/support/notes/1374724
    https://service.sap.com/sap/support/notes/1379804
    https://service.sap.com/sap/support/notes/1266510
    Also you could try changing the read mode of the F4 help depending on the size of the cube and MD tables.

  • Input help in variable screen

    Hi,
    I'm having a query on top of 0EMPLOYEE. 0EMPLOYEE has an attribute of a business unit (which has the default BEx settings of display as text) and I have a selection option variable on top of this attribute.
    Previously, on BW 3.x the variable screen used to show both the key and text, regardless of the settings in the BEx tab of the infoobject definition. in BEx Web JAVA it will only let me have the text selection. is it possible to change that without changing the default settings in the BEx tab of the infoobject definition?
    Tomer.

    For BEx Web 7.0 make sure you have the attributes suppressed in help with the instructions from note below:
    https://service.sap.com/sap/support/notes/1144979
    Also apply the optimizations provided in the notes below:
    https://service.sap.com/sap/support/notes/1374724
    https://service.sap.com/sap/support/notes/1379804
    https://service.sap.com/sap/support/notes/1266510
    Also you could try changing the read mode of the F4 help depending on the size of the cube and MD tables.

  • Issue in F4 help in variable screen of the report

    Hi All,
    I am facing an issue with Bex query, there are two navigational attributes in query, those are NAV1 and NAV2 and we have created two variable for these attributes,
    When we run the query in analyzer and in the variable screen we are trying to select values for these attributes from F4 help, we are able to see both the values in each attribute.
    For example NAV 1 has 100 vlues and NAV2 has 100 values, when we click on F4 help on the NAV1 attribute in variable screen we are able to see 200 entries, means it's including NAV2 values, it is vise-versa for the NAV2 attribute also.
    I ran the same report in RSRT and click on F4 help for NAV1 and NAV2 attributes, here entris are fine,each attribute showing only 100 entries.
    What could be reason for this issue.
    Could you please adivce me how to solve this.
    Thanks in advance,
    Venkat Kalla

    Hi,
    Please check Note 1495735 - 'check of changed records between DB and BIA after changerun'.
    If BIA is in use then this can be the cause.
    Otherwise check Note 1517248 - 'F4 help uses M mode instead of D mode for line item characteristic'.
    Finally, verify the read modes for both InfoObjects:
    1565809 - Settings for BW query F4 help
    Regards,
    Michael

  • Issue with Variable screen

    Hi,
    When I execute the webtemplate with cetain selection values, the out put looks good. When I go back and change the values in selection, the output is still showing the previous results.
    The variable screen is not refreshing in webtemplate.
    Please let me know if any solution for this....
    Thanks in advance,
    Murthy.

    Hi Rama,
    Cache memory stores previous result so you need to logout and then again run the WAD.
    Do the following 2 things and see:
    1. Empty your internet explorer cache, i.e. delete all temporary files from IE.
    2. Go into BI, execue RSRT1, select the cache monitor button. In there there is another button for main memory, click that. Search for the query in question and delete the cache from there.
    Close you Internet explorer and open the query again, it should work.
    Cheers,
    Uday.

  • Need help with full screen slideshow image quality

    I am looking to display some images with full screen slideshow. The images I add are very large, over 5000 wide. When I publish the site some images retain their quality while others lose it and look like crap. Why would this be and how can I fix it. I tried to resize them to the 2560x1707 that muse does, and then add them. This doesn't change the end result of poor quality.

    Go to Assets Panel and locate the image you want to use at original size. Right click the image and chose 'Import Larger Size'.
    See if that helps retain quality for that image, since Muse does not resize/interpolate that image for you.
    Cheers,
    Vikas

  • Bookmark with Variable screen and UserExit

    Hi
    We're using the bookmarks in portal of N2004s.
    If someone starts a bookmark it's possible to bring the user first to the variable screen. But I recognized that the userexit is not activated for some variables after changing them.
    concret:
    I called a report with time-selection week = 10.2007 - the report has keyfigures which are restricted by a userexit variable which is previous year (calculated by time selection - 1year) - so the report shows me the keyfigures with previous year 10.2006 and 10.2007 - I save this as a bookmark.
    calling the bookmark with this link: &bookmark=46LQ49TMUQ8BRH3O91VEH0XMK&variable_screen=X
    the bookmark shows me first the variable screen. The user can change then the time-selection. But when i change now the time-selection in the variable screen from 10.2007 to 20.2007 I get in the report stll 10.2006 and 20.2007.
    So it seems to me the bookmark doesn't run through the user exit to fill the variable "previous year".
    How can this be activated?
    Thank you for your reply.
    Roger

    Hi
    I debugged now the user exit and it seems as following:
    - calling a bookmark with selection_screen=x but without the parameter clear_variables=x does run through the user exits step 1 to 3 before showing the variable screen. After changing a variable the user exit is only enabled for step 3 and not anymore for step 2 - that's why the previous year is not updated.
    - calling the bookmark with selection_screen=x and clear_variables=x runs user exit with step 1 before selection screen and then after entering variables step 2 and 3 - and the previous year is filled correctly. But this is not useable, because the user want's to have selection variables prefilled.
    Has someone an idea how to bring the bookmark without clear_variables=x to the point to run the step 2 in user exit after changing variables in selection screen?
    Thx
    Roger

  • F4 Help in Variable Screen during Query Execution

    Hi All,
    We are executing queries through WAD. The F4 help in the variable screen during query execution is taking a lot of time.
    SAP note 661251 suggests changing the F4 mode to M. We need to change the booked value parameter.
    I looked into the standard WAD web template but i'm not seeing any options/ooked value parameter.
    Please suggest where I need to go to change the parameter. Thanks.
    Regards,
    Vivek

    Not much experience in WAD but I think there should be a query in BEx Query Designer.
    There you can choose that characteristics which takes time. Select "Advanced" tab from right hand side.
    Under "Filter Value Selection During Query Execution"  you will get 4 options.
    BTW if you have a query on DSO then creating index ( secondary) on the affected characteristics would also resolve your problem
    Regards
    Anindya

  • Mac user needs help with photoshop screen and tool bar

    Hello when I open photoshop I get the screen you can see to the left. The right hand tool bar has disapeard, if you scroll across it comes into view, I want to be able to open photoshop as I could originally with the screen the size of the computer screen and the tool bar in place. What is also happening is that when I select the image i want, the image goes directly on to the screen and does not go to the tool bar above, again I would like to have the images going to the tool bar so I can select them and put them on a blank page. The same happens when I open up a blank page it does not store it in the tool bar but opens it up directly on to sreen. Hope you can help.

    Thanks also tried that it does hangs the screen back to how it was but the background is now my screen saver with the photoshop tool bars around. But the docking area is still not visible and when I open a file it opens it as sep screen and layer and not as part of docking station? Very strange
    Sent from my BEphone

  • Help with T430 screen resolution

    I would like to purchase a T430 with 1600x900 screen resolution as recommended in the reviews. However, I am concerned about whether I will be able to read text at that resolution. (This was an issue with the higher resolution when I purchased my beloved T400.) I cannot find a T430 in my area to look at before purchase. So, I am wondering whether some kind soul might be willing to post a screenshot of the desktop (with icons on it) of their T430 1600x900. Viewed at the original size, I should be able to determine from that image whether it will be legible, right?
    Solved!
    Go to Solution.

    Lilac wrote:
    There are no stores in my area that carry the T430. I would have to travel 3 hours to see one. But if the screenshot would not tell me what I need to know, maybe I will need to do just that.
    I didn't say a ThinkPad.  Any computer with a 14" screen running 1600x900 natively will give you some idea if that resolution is going to be acceptable.
    If the closest computer store is 3 hours, it probably isn't worth doing.  6 hours round trip is a lot of time and hassle.

  • I need help with blue screen on Windows 7

    Hi guys...I was wondering if someone could help me...!
    While I play a video game, I recieve a error blues screen message...I don't know if it is an error from my S.O, or it is an error for that video game...! 
    The message that I been given so far says :
    Problem signature:
      Problem
    Event Name:                        BlueScreen
      OS Version:                                         6.1.7600.2.0.0.256.1
      Locale ID:                                             10250
      Additional
    information about the problem:
      BCCode: 
                                                 50
      BCP1:                                                    FFFFF900C061C770
      BCP2:                                                    0000000000000000
      BCP3:                                                    FFFFF96000636D15
      BCP4:                                                    0000000000000000
      OS
    Version:                                          6_1_7600
      Service
    Pack:                                       0_0
     Product:                      
                            256_1
      Files
    that help describe the problem:
      C:\Windows\Minidump\022710-26223-01.dmp
      C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xml

    Hi,
    In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
    If you don't know where .DMP files are located, here's how to get to them:
    1. Navigate to the %systemroot%\Minidump folder.
    2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
    3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
    4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
    between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
    much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
    choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
    If you are going to use Onedrive but don't know how to upload to it, please visit the following:
    Upload photos and files to Onedrive.
    After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
    Share files and folders and change permissions and view 'Get a link'.
    Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
    If your computer is not generating .DMP files, please do the following:
    1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
    2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
    drives'.
    3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
    log'.
    Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
    4. Double check that the WERS is ENABLED:
    Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
    Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
    If you cannot get into normal mode to do any of this, please do this via Safe Mode.
    Regards,
    Patrick
    “Be kind whenever possible. It is always possible.” - Dalai Lama

  • Help with scrolling screen

    I am writing a turn based strategy game in Java but I am unable to make a scrolling screen you can "move" your view of the game board around in.
    I can do every other aspect of the game myself, except for this.
    Examples of this on the internet are only for Applets(My program is a JFrame)
    Can anyone help?

    http://java.sun.com/javase/6/docs/api/javax/swing/JViewport.html
    Edit: Don't even start with the Swing fascist thing George ;-D
    Further edit: Here, i'll keep it neutral. http://help.eclipse.org/help31/index.jsp?topic=/org.eclipse.draw2d.doc.isv/reference/api/org/eclipse/draw2d/Viewport.html
    Message was edited by:
    jGardner

  • HELP WITH BROKEN SCREEN 2G!!

    So on sunday, i was talking to a friend on the phone, and being a clumsy idiot, tripped on a crack in the pavement that was like 5 inches tall. i ended up accidentally throwing my phone, and when i got it, it looked like this (will get links to pics in a bit!) it works perfectly though! i can text, make calls, even the places where the glass cracked originally work fine. but i want to get the glass replaced! ive seen on ebay that you can buy replacement glass, but i DO NOT want to open up this phone!! does anybody know if apple will cover it? i checked and it said my phone was not insured, but i still have apple complimentary service that expires in jan 25, 2010. will this complimentary service cover it? and if not, then how much would it cost? and is there a way to replace this myself without opening the phone, or taking it to a repair company and paying 250$ or more? Thanks for the help!!
    http://i29.photobucket.com/albums/c284/lluvsk8in/Photo8.jpg
    http://i29.photobucket.com/albums/c284/lluvsk8in/Photo7.jpg
    Message was edited by: Samsnack15

    Apple's warranty for the iPhone is a manufacturer's warranty, which does not cover accidental damage. Apple provides a one year warranty on the iPhone with an option to purchase the AppleCare extended warranty for U.S. residents anytime before the one year warranty period expires, which extends the standard one year warranty by an additional year. This is a manufacturer's warranty, which is limited and is not insurance.
    Apple doesn't offer a menu of repair services such as replacing the glass and screen except for replacing the battery. With the first generation iPhone, there is more involved than just replacing broken glass.
    Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange and includes a warranty. Apple's "repair" or exchange price for the first generation iPhone is $199 for the 8GB, and $249 for the 16GB. You will receive an exchange which will be a refurbished first generation iPhone.
    http://www.apple.com/support/iphone/service/faq/#warranty7

Maybe you are looking for