Help with video display!!
Hello all,
After installing the 41.09 drivers for my MSI GF4200 64mb card, I noticed that upon DVD or any video file playback, I only see about one quarter of the video, which is the upper right hand corner. I do not know if the problem started with the installation of this driver as I have not tried to view video in awhile until after installing this driver. Previously I believe I had 4072 and the original drivers in. So, I reinstalled the original drivers and I am still having the same problem. I ran my direct x diag tool and I passed all of them.
Another strange part of this is the fact that after I play with the display settings, the problem seems to be fixed. But when I close the program, and reopen the video file the problem recoccurs again.
I do not have any other video problems that I know of, but I will go run Battlefield 1942 (intense gfx) to see how I fare. If anyone has any suggestions or ideas, please share as this is really starting to bug me. Thanks for your help in advance!
twanto
Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto
Similar Messages
-
Help with video in Flex - Alternative to embedding .flv?
I'm building a Flex application that needs to play a video, which I have in .flv format. I tried the mx:VideoDisplay component, and it was great, but, unfortunately, I need to be able to package the entire application into a single file, and Flex doesn't support embedding .flv files. Next I tried converting the .flv to a .swf, embedding that, then using mx:SWFLoader to display it. This worked, except that I can no longer control the video playback; the video just keeps endlessly looping. I need to be able to stop the video, and ideally I would like access to something like the complete event from mx:VideoDisplay, so that I can hide the video when it has reached the end.
I have tried a couple of solutions based around the idea that the content of the .swf can be treated as a MovieClip, but none of these worked for me. Any ideas?Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning -
Please help with video streaming
I'm trying to play a video on a web page. I got the below
script from
a website tutorial, but it does not work correctly. The
script will
play a video in both IE and firefox browsers, but in IE, it
will not
show the video player controls even though I have added more
than
enough height.
<OBJECT ID="MediaPlayer" WIDTH="208" HEIGHT="300"
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
STANDBY="Loading Windows Media Player components..."
TYPE="application/x-oleobject">
<PARAM NAME="FileName" VALUE="videofilename.wmv">
<PARAM name="autostart" VALUE="true">
<PARAM name="ShowControls" VALUE="true">
<param name="ShowStatusBar" value="false">
<PARAM name="ShowDisplay" VALUE="false">
<EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
NAME="MediaPlayer"
WIDTH="208" HEIGHT="300" ShowControls="1" ShowStatusBar="0"
ShowDisplay="0" autostart="1"> </EMBED>
</OBJECT>That is an older site but there is a lot of information there
8)
John Malone
=========
"Canned Heat" <[email protected]> wrote in message
news:[email protected]...
|A followup. The site you linked to (mediacollege) does have
a wealth
| of info. However, for anybody else reading this post I did
want to
| point out that it is the same site is where I got the
script (in my
| original post) that didn't work. It was located here:
|
|
http://www.mediacollege.com/video/format/windows-media/streaming/index.html
|
| So I would recommend using Joh's much simpler script, not
the one from
| mediacollege referenced above.
|
| Again, thanks John.
|
|
|
| On Fri, 23 Mar 2007 11:06:56 -0500, "John Malone" <John
Malone@no
| spam.com> wrote:
|
| >Well I couldn't get it to work in IE7..
| >And you get the prompt to "click here to activate this
control"
| >here is a sample >
| >
| >
http://www.xmas-i-am.com/test/video2.htm
Autoplay when page loads.
| >
| >If you look at the source code on the page you will see
I am using an external script
| >file...
| >This takes care of the outlined player (in IE) with the
prompt to "click here to
| >activate".
| >By changing the script you can load the page without
starting the movie.
| >
| >Like this..>
| >
http://www.xmas-i-am.com/test/video.htm
| >
| >Steal the code and the script (test.js or auto.js) and
your good to go...
| >
| >Or look at .....>
| >
| >
http://www.midistudio.com/MPlayer9/index.htm
| >and read how......
| >This is mostly for MIDI music but can work with video
with minimal modifications.
| >
| >Also here is a good site...
| >
http://www.mediacollege.com/video/streaming/formats/
| >You will need to follow the links>> to get a
wealth of information.
| >
| >Hope this helps...
| >
| >Just an after thought...
| >
| >Beware of bandwidth limitations of your site this could
cost you money!!!
| >
| >On that sample site(at the top) is a movie (1.3 Megs)
that is viewed enough to cause
the
| >usage to be about 3 Gigs a month. (now)
| >But at times (September) that goes up to 10~20 Gigs and
at it's peak I had 17 Gigs a
week
| >usage.
| >(It is the 911 Flash movie)
| >
| >Hope this helps......
| >
| >John Malone
| >===============
| >"Canned Heat" <[email protected]> wrote in message
| >news:[email protected]...
| >| Thanks for taking the time to test it. I want to make
sure, tho, that
| >| we're not talking about two different things.
| >|
| >| The script plays videos fine for me too. However, the
problem is that
| >| when playing with IE the video controls such as play,
pause, etc are
| >| not displayed.
| >|
| >| When you played it did you see the controls in IE?
| >|
| >| I have tested it on three machines, ones with the
same IE version as
| >| yours, and I get no controls. I only see the controls
in firefox.
| >|
| >| Thanks,
| >| -Dan
| >|
| >|
| >| On Thu, 22 Mar 2007 15:48:02 -0500, "Eugene J. Maes"
| >| <[email protected]> wrote:
| >|
| >| >Your script works fine in ie 6 with my wmv file.
| >| >
| >| >gene
| >| >"Canned Heat" <[email protected]> wrote in
message
| >|
>news:[email protected]...
| >| >> I'm trying to play a video on a web page. I
got the below script from
| >| >> a website tutorial, but it does not work
correctly. The script will
| >| >> play a video in both IE and firefox
browsers, but in IE, it will not
| >| >> show the video player controls even though I
have added more than
| >| >> enough height.
| >| >>
| >| >> <OBJECT ID="MediaPlayer" WIDTH="208"
HEIGHT="300"
| >| >>
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
| >| >> STANDBY="Loading Windows Media Player
components..."
| >| >> TYPE="application/x-oleobject">
| >| >> <PARAM NAME="FileName"
VALUE="videofilename.wmv">
| >| >> <PARAM name="autostart" VALUE="true">
| >| >> <PARAM name="ShowControls"
VALUE="true">
| >| >> <param name="ShowStatusBar"
value="false">
| >| >> <PARAM name="ShowDisplay"
VALUE="false">
| >| >> <EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
| >| >> NAME="MediaPlayer"
| >| >> WIDTH="208" HEIGHT="300" ShowControls="1"
ShowStatusBar="0"
| >| >> ShowDisplay="0" autostart="1">
</EMBED>
| >| >> </OBJECT>
| >| >
| >|
| >
| -
Help with CRT display...
Hi all...
I'm facing a nasty problem connecting an external crt display to my MacBook Pro.
First here's the setup:
-Two MacBook Pro 2.4 GHz
-G4 Cube 450MHz
-iBook G3 800MHz
-CRT DPRO750SB 17" (Nec-Mitsubishi)
-CRT AT897D-1 17" (Formac)
-Problem:
I used to connect the DPRO750SB to one MBP with the Apple's DVI/VGA adapter and everything was fine but now the display doesn't light up anymore.
Furthermore, trying to boot with the display hooked up make the computer crash during startup.
-Clues:
The display and its VGA cable seems OK since there is no problem with the G4 Cube (VGA to VGA) nor the iBook (mini-DVI/VGA).
I have no problem using the Formac Display with both MBP (DVI/VGA).
The DPRO750SB icc profile don't show up anymore in the "Displays" Preference Pane.
I'm able to get the DPRO working sometimes by plug the Formac in, unplug it, then plug the DPRO in.
(in this case, the "Displays" Pref Pane says it's the Formac).
I'm really lost now...
Any help would be greatly appreciated...
Thanks
FabriceWell BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto -
Need Help With Video In Flex Mobile
Hi,
I have been searching quite a bit for information on this and have found really nothing useful for my problem. So far, I've converted the actionscript code posted here: http://www.adobe.com/devnet/flash/articles/osmf-media-player.html
to work within my ios mobile project. The problem is that no matter what I have tried, I can hear the video but not see it. That codes uses the OSMF framework, which uses StageVideo I think, so I've tried setting the application background alpha to 0 as has been posted about; still no video though. The project is also set to use direct rendering. I've even tried some bare bones AS code to implement the StageVideo, as others have posted here, but still same thing. So can anyone either show me a working example or provide any suggestions on what I might be doing wrong?
thanksHi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning -
Quick help with css display in IE7
Hi, I haven't been on this forum in ages - I have a slight display glitch would love some help with:
http://magma.ie/magmablog-html/index.html
It looks great in the latest and greatest browser (IMHO!): - firefox 3.5.6
http://cl.ly/17cD
but IE7 pops the search field in the sidebar off to the right, at least, according to browsershots.org
http://cl.ly/1A1f
Thanks, HIt looks OK in IE8 but IE7 is having trouble with the #Sidebar width.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
Need Help with Address Display
I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
AndrewThe example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_name
END employee_name,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE employee_id
END employee_id,
CASE
WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
employee_id
THEN NULL
ELSE accounting_department
END accounting_department,
street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek -
Help with XML, display data on swipe/click
Hello.
I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
stop();
var nameArray:Array = new Array();
var countryArray:Array = new Array();
var portraitArray:Array = new Array();
var flagArray:Array = new Array();
var jobtitleArray:Array = new Array();
var imageNum:Number=0;
var totalImages:Number;
//Load XML
var XMLURLLoader:URLLoader = new URLLoader();
XMLURLLoader.load(new URLRequest("recbook.xml"));
XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(event:Event):void {
var theXMLData:XML = new XML(XMLURLLoader.data);
totalImages=theXMLData.name.length();
for (var i:Number =0; i < totalImages; i++){
//push xml data into the arrays
nameArray.push(theXMLData.name[i]);
countryArray.push(theXMLData.country[i]);
portraitArray.push(theXMLData.portrait[i]);
flagArray.push(theXMLData.flag[i]);
jobtitleArray.push(theXMLData.jobtitle[i]);
//data is processed
loadData();
function loadData():void {
var thisPortrait:String = portraitArray[imageNum];
var thisCountry:String = countryArray[imageNum];
var thisName:String = nameArray[imageNum];
var thisJobtitle:String = jobtitleArray[imageNum];
var thisFlag:String = flagArray[imageNum];
var dataLoader:Loader = new Loader();
dataLoader.load(new URLRequest(portraitArray[imageNum]));
dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
function dataLoaded(event:Event):void {
//I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
portraitUILoader.source=thisPortrait;
flagUILoader.source=thisFlag;
selectedName.text=thisName;
selectedCountry.text=thisCountry;
selectedJobtitle.text=thisJobtitle;
//add to imageNum (1);
imageNum++;
if (imageNum < totalImages) {//stopping at img2
trace("imageNum " + imageNum);
trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
loadData();
trace("Total Images " + totalImages);
//click to move past the home screenI'd like to ditch this. don't know how.
homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
function goNext(event:MouseEvent):void
nextFrame();
*/here's the output:
imageNum 1
image name (thisPortrait) images/img1.jpg
imageNum 2
image name (thisPortrait) images/img2.jpg
imageNum 3
image name (thisPortrait) images/img3.jpg
Total Images 4
Total Images 4
Total Images 4
Total Images 4
It starts the display on image 1 (the second in the series img2.jpg)*/Thank you.
That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
new output after moving the increment:
imageNum 0
image name (thisPortrait) images/img1.jpg
imageNum 1
image name (thisPortrait) images/img2.jpg
imageNum 2
image name (thisPortrait) images/img3.jpg
imageNum 3
image name (thisPortrait) images/img4.jpg
TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete() -
Help with Conditional Display and Validation
Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
v_start_date work_items.start_date%TYPE;
v_end_date work_items.end_date%TYPE;
BEGIN
SELECT start_date
,end_date
INTO v_start_date
,v_end_date
FROM work_items
WHERE work_items_id = :P51_WORK_ITEMS_ID;
IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
:P51_CHANGE_REASON IS NULL ) THEN
RETURN 'Change Reason must have a value';
END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
JoePhil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe -
Help With Video Pop Up Window.
Hi there Im very new to web design so please understand that I am a complete novice, so my understanding is limited. Any help would be most appreciated.
Could anyone provide me with a piece of code I can put into the HTML snippet function that will allow me from a hyperlink that says "video" to open up this Vimeo video (see below) in a new window that is the exact dimensions of the given video.- Almost like a pop up.
Many thanks to any help,
- preferably I want the appearance of the video to be like the embedd code below regulates: to not include any additional text etc.
<object width="255" height="143"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="255" height="143"></embed></object>
also here is the link to the original page http://vimeo.com/8695239
Thanks again, Robin.On this page you'll find code to open a page with video in a new window :
http://www.wyodor.net/MoreEmbed/
Click where it says :
Here's a basic sample page with shaded background you can use for testing.
Click to open a window with the pop-up code. -
hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod videook...i just uninstalled itunes and installed the previous version...and it worked fine....
-
NEED HELP WITH VIDEO SOUND PLS
just bought a 30 GB ipod, updated itunes to make the videos compatible. uploaded 3 music videos, they work perfect except they have no sound. dont know what the problem is. i havent' restarted my compute yet, maybe that's it but i highly doubt it. anyones opinion would be highly appreciated. thanks for your help guys.
-MIKENeither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it. -
Hello,
I need some help with a project. What I eventually want is that a webcam controls the mouse position and the mouse position
controls a video. But first I would like the part where the mouse position controls the video.
So if the mouse is on the left on your screen the video will be at the first frame and when you move you're mouse to
the right the video will play accordingly to the movement. and stop when the mouse is all the way to the right.
Effectivly the mouse scrolles through the video. It only needs to be on the x-axis.
I'm not that formilliar with flash so any help would be great
Thx!
ThijsI fixed it in an other way.
Made a imgseq and following code (with some help ):
stop();
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.addEventListener(FullScreenEvent.FULL_SCREEN, resizeHandler);
stage.addEventListener(MouseEvent.MOUSE_MOVE, inputHandler);
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
var imgSeq:ImgSeq = new ImgSeq();
var columnWidth;
var numColumns;
stage.addChild(imgSeq);
imgSeq.x = 350
imgSeq.gotoAndStop(1);
columnWidth = stage.stageWidth / imgSeq.totalFrames;
numColumns = stage.stageWidth / columnWidth;
function resizeHandler(e:Event):void {
// verdeel het scherm in kolommen, iedere keer dat het scherm geresized wordt.
// breedte van 1 kolom (schermbreedte gedeeld door aantal plaatjes)
columnWidth = stage.stageWidth / imgSeq.totalFrames;
// totaal aantal kolommen dat binnen het scherm past (breedte gedeeld door breedte van één kolom )
numColumns = stage.stageWidth / columnWidth;
function inputHandler(e:MouseEvent):void {
// voer dit iedere keer dat je de muis beweegt uit.
// kijk voor iedere kolom of de muis er binnen valt.
for(var i = 1; i <= numColumns; i++){
//vergelijking die checkt of de muispositie binnen de waarden van kolom valt.
if(mouseX <= i * columnWidth && mouseX >= (i * columnWidth) - columnWidth ){
// zet het framenummer van de imageSequence gelijk aan de huidige kolom.
imgSeq.gotoAndStop(i);
many thx! -
Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not. -
Search Help with Structure Display
Hi,
I want to create a search help which should display my output in the structure format base on the different levels.
I have already written a test program which display all the values in proper structure format. But I wanna do the same in the search help. It has to display the output in the structure format.
Please guide me how to achieve this.
Thanks,
Karthikhello,
you could write additional report based on ALV tree. So you would have the stucture which you want to have and on value request call your custom program. i doubt that there is FM or class which could generate search help tree. So basically you have to write your own logic. Or you could use GuiXt tool. Example and tutorial.
http://www.synactive.com/tutor_e/lessonco00.html
br,
dez_
Maybe you are looking for
-
Dbms_lob.substr ( difference with simple function substr)
Hello suppose the following query SELECT employee_id, resume, DBMS_LOB.SUBSTR (resume, 5, 18) lob_substr, substr(resume, 5, 18) sub FROM employees WHERE employee_id = 170; resume is of CLOB datatype and for employee
-
Gallery caption custom settings - adding blank spaces?
When using the custom settings in the Caption option within the Gallery Module I would like to add blank spaces between options but can't find a way to do it. I prefer not to use dashs or other characters for separators. Ie: <filename> blank space/s
-
We are running Oracle 9i on Solaris 9. I have a delete statement that's taking too long. Can somebody please advice what to do reduce the run time? Here is that: delete materal_table where material_id = (select material_id from materials where name =
-
VAT accounting in Spain (Recargo de equivalencia)
Hi everybody, We have a plroblem with VAT booking with spanish speciality Recargo de equivalencia. SBO allows to create VAT type and % with the corresponding account where to book. Our problem is with the Recargo de equivalencia we need to book for I
-
Macbook 15 freezing - SMC 1.9 update will not install
I have Macbook Pro 15 Mid 2010 model Model Identifier 6.2 The computer has been freezing up. I'm running SMC Version 1.58f16 and tried to upgrade to version 1.9. When I run the installer I receive a message that the 1.9 software upgrade is not meant