Help with Video Effect: 'Impuls' Zoom

Hey,
Im currently working on a Project and I have this one Effect that I would really like to put in the cideo, but im not sure how to do it. The Problem is that I also dont really know how you call this effect, this makes the search for an answer pretty hard. I will try to explain you my wanted effect the best I can:
What I want to do it to have a Impuls like Zoom in and then Zoom out again. I want to you put it equal to the bass in the song so its really just suppose to do a quick zoom in and zoom out when the big bass comes. Im pretty sure that this is probably really easily done, but Im actually fairly new to premiere Pro Cs4 so I would really apriciate it if someone could gove me a quick but hopefully problem solving answer.
If you have any questions on how i mean this effect or some other imformation just ask .
Thanks a lot.

Keyframe the scale propertie under Motion in the Effect Controls Panel.

Similar Messages

Help with Video Effect (Aspect Ratio)

I have a 4:3 Video, but I don't want to stetch it to fit 16:9 widescreen;
How do I achieve this effect?
Sorry I'm a bit new to Premier Pro but would like if someone could point me in the right direction.

Welcome to the Forum.
Create a 16:9 sequence. Stack duplicate copies of your 4:3 clip on tracks 1 and 2. Use the Motion>Scale effect to enlarge the copy in track 1 to fill the frame and then give it a 30% to 50% Gaussian blur.
Jeff

Need help with gunshot effect in FCP

New to FCP and am trying to add a gunshot effect to a short film. Doesn't have to look top notch...just looking for something simple.
I added a muzzle blast for the shooter from detonationfilms.com, which worked great. When i overlayed the muzzle blast, the background was black. I was able to fix this by using Modify>Composite>Screen.
Now I'm trying to add the bullet hitting the victim, but all the shots from detonationfilms.com have white backgrounds. For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? Are there any other websites that have bullet hits with a black background? As I said, I'm not too picky.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple).
Thanks! Much appreciated.

welcome to the family. We're not really here to help you with practical effects and filmmaking tips, we're here to help you with the software. But we'll see who shows up.
For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? < </div>
Screen drops out black pixels. It's not really the best way to get luma key effects but it's quick and easy for high contrast effects footage that is delivered on superblack. Try a luma keyer to key out the white.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple). < </div>
Should have been done as a practical effect while shooting. A simple squib and blood packet would have been FAR easier to deal with than rotoscoping and hand painting. You need After Effects or, if you have Motion, crack the manual and get set for some long sessions. There is nothing simple about handpainting on a moving object.
bogiesan

Need Help With Video In Flex Mobile

Hi,
I have been searching quite a bit for information on this and have found really nothing useful for my problem. So far, I've converted the actionscript code posted here: http://www.adobe.com/devnet/flash/articles/osmf-media-player.html
to work within my ios mobile project. The problem is that no matter what I have tried, I can hear the video but not see it. That codes uses the OSMF framework, which uses StageVideo I think, so I've tried setting the application background alpha to 0 as has been posted about; still no video though. The project is also set to use direct rendering. I've even tried some bare bones AS code to implement the StageVideo, as others have posted here, but still same thing. So can anyone either show me a working example or provide any suggestions on what I might be doing wrong?
thanks

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Need help with ECHO effect

My problem is explained in this video

didn't offend me. I just don't have the patience to wade through videos when a succinct typewritten question does the job. We've gotten along pretty well around here for decades without questions posted as videos but, you know what, video clips may be the coming trend and you're just on the front of the wave.
The biggest issue with video links, however, is that many of us are behind corporate firewalls that are quite picky about what gets through. My firewall, for instance, is controlled down to granular youtube channels and makes most public-access photo and photo sump sites totally inaccessible. If you want to make sure people other than Rick can help you out, post a question. Otherwise you will restrict the number of possible views and responses to only those who can, or will, view your video files.
Rick will help anyone if he can.

Help With Video Pop Up Window.

Hi there Im very new to web design so please understand that I am a complete novice, so my understanding is limited. Any help would be most appreciated.
Could anyone provide me with a piece of code I can put into the HTML snippet function that will allow me from a hyperlink that says "video" to open up this Vimeo video (see below) in a new window that is the exact dimensions of the given video.- Almost like a pop up.
Many thanks to any help,
- preferably I want the appearance of the video to be like the embedd code below regulates: to not include any additional text etc.
<object width="255" height="143"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="255" height="143"></embed></object>
also here is the link to the original page http://vimeo.com/8695239
Thanks again, Robin.

On this page you'll find code to open a page with video in a new window :
http://www.wyodor.net/MoreEmbed/
Click where it says :
Here's a basic sample page with shaded background you can use for testing.
Click to open a window with the pop-up code.

Help with Special Effect

I am building the opening page for a website in Flash, I'm
not the most experienced with Flash, but I'm getting a lot better
and I know many of the functions. However I'm having a problem with
an effect. It shouldn't be too hard to figure out, but here it is.
I have a US Flag that is square it was built in Flash using
about 10 - 12 layers with some motion. I haven't flattened the
layers ( I don't know how too, or even know if I'm supposed to do
that at all).
I am trying to take the last of the constructed square flag
and transform the Square into a Circle encompassing all of the
elements within the square in a nice smooth motion.
What is the best way for me to go about this?
Thank You

First off...no need to flatten layers. In fact, there's no
such thing in Flash (unlike Photoshop or Fireworks). You can only
delete layers (not to be confused with Layer Folders whichcan be
collapsed on the timeline, but not flattened). Most animations need
their own layer anyway and the number of layers won't in and of
themselves effect the size of the resultant SWF (the contents of
those layers will, but adding more layers won't make too much
difference).
Secondly, for the animation effect, you probably want to swap
out your finished square flag (multiple layers) for a single
graphic (new layer). Then, depending on the exact effect you want,
you could use a circular mask on the square or perhaps shape tween
the square to a circle.
Hope that helps!

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

NEED HELP WITH VIDEO SOUND PLS

just bought a 30 GB ipod, updated itunes to make the videos compatible. uploaded 3 music videos, they work perfect except they have no sound. dont know what the problem is. i havent' restarted my compute yet, maybe that's it but i highly doubt it. anyones opinion would be highly appreciated. thanks for your help guys.
-MIKE

Neither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it.

Need help with video-scroll

Hello,
I need some help with a project. What I eventually want is that a webcam controls the mouse position and the mouse position
controls a video. But first I would like the part where the mouse position controls the video.
So if the mouse is on the left on your screen the video will be at the first frame and when you move you're mouse to
the right the video will play accordingly to the movement. and stop when the mouse is all the way to the right.
Effectivly the mouse scrolles through the video. It only needs to be on the x-axis.
I'm not that formilliar with flash so any help would be great
Thx!
Thijs

I fixed it in an other way.
Made a imgseq and following code (with some help ):
          stop();
          stage.addEventListener(Event.RESIZE, resizeHandler);
          stage.addEventListener(FullScreenEvent.FULL_SCREEN, resizeHandler);
          stage.addEventListener(MouseEvent.MOUSE_MOVE, inputHandler);
          stage.scaleMode = StageScaleMode.NO_SCALE;
          stage.align = StageAlign.TOP_LEFT;
          var imgSeq:ImgSeq = new ImgSeq();
          var columnWidth;
          var numColumns;
          stage.addChild(imgSeq);
          imgSeq.x = 350
          imgSeq.gotoAndStop(1);
          columnWidth = stage.stageWidth / imgSeq.totalFrames;
          numColumns = stage.stageWidth / columnWidth;
          function resizeHandler(e:Event):void {
          // verdeel het scherm in kolommen, iedere keer dat het scherm geresized wordt.
                    // breedte van 1 kolom (schermbreedte gedeeld door aantal plaatjes)
                    columnWidth = stage.stageWidth / imgSeq.totalFrames;
                    // totaal aantal kolommen dat binnen het scherm past (breedte gedeeld door breedte van één kolom )
                    numColumns = stage.stageWidth / columnWidth;
          function inputHandler(e:MouseEvent):void {
          // voer dit iedere keer dat je de muis beweegt uit.
                    // kijk voor iedere kolom of de muis er binnen valt.
                    for(var i = 1; i <= numColumns; i++){
                              //vergelijking die checkt of de muispositie binnen de waarden van kolom valt.
                              if(mouseX <= i * columnWidth && mouseX >= (i * columnWidth) - columnWidth ){
                                        // zet het framenummer van de imageSequence gelijk aan de huidige kolom.
                                        imgSeq.gotoAndStop(i);
many thx!

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Help with video in Flex - Alternative to embedding .flv?

I'm building a Flex application that needs to play a video, which I have in .flv format. I tried the mx:VideoDisplay component, and it was great, but, unfortunately, I need to be able to package the entire application into a single file, and Flex doesn't support embedding .flv files. Next I tried converting the .flv to a .swf, embedding that, then using mx:SWFLoader to display it. This worked, except that I can no longer control the video playback; the video just keeps endlessly looping. I need to be able to stop the video, and ideally I would like access to something like the complete event from mx:VideoDisplay, so that I can hide the video when it has reached the end.
I have tried a couple of solutions based around the idea that the content of the .swf can be treated as a MovieClip, but none of these worked for me. Any ideas?

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Help with After Effects

I just upgraded to PP CS4 to CS5 Premium with After Effects and Photoshop. I'm trying hard to figure things out but I'm unfamiliar with these programs and have no idea where to begin to learn. I've tried watching various tutorials, but they skip over basics, and unfortunately, that's what I need. I
Can anyone recommend a really good book or video or something to get me started? I know there's so much to learn and I'm so eager to learn it all. However, I don't even know how to get the footage from CS5 to After Effects.
One more question - I'm working on a video right now in CS5. The girl in the video has rosacea and I want to take the red out of her face. Is this possible in After Effects? If so, can someone please tell me how to go about doing it - or suggest a tutorial that deals with such an issue?
Thank you so much,
Jules

> Do you have any idea which tool in after effects I would use, and how,
to remove color from an area on a video and blend it with the
surrounding area. Or if anyone knows of a tutorial explaining that
process I would so appreciate it.
You should ask your After Effects questions on the After Effects forum:
http://forums.adobe.com/community/aftereffects_general_discussion
Here are two video tutorials that show different ways to selectively apply an effect to a specific area:
https://www.video2brain.com/en/videos-1501.htm
http://www.peachpit.com/podcasts/episode.aspx?e=8822f9a1-93c5-4a00-8697-a54b653c7aaf
But you should really begin at the beginning and learnt he basics of After Effects first.

Problems with video effects in iMovie

Hi, I'm a new user of imovie and I have found some difficulties: where is the video effects menu? In particular, it is possible to increase (or decrease) the speed of a clip?
Thanks for anyone who could help me,
Mac Shunsuke

iM08 offers no effects at all, that option was dropped by Apple..
you're entitled on a free download of iMHD6 here
http://www.apple.com/support/downloads/imovieHD6.html
which offers fast/slow/reverse as v/fx ..
another option is usage of a free 3rd party app, link and how-to on my site here
http://karsten.schluter.googlepages.com/slowmowithim08
have you seen the tutorials for iM08?
http://www.apple.com/ilife/tutorials/#imovie

Please help with video streaming

I'm trying to play a video on a web page. I got the below
script from
a website tutorial, but it does not work correctly. The
script will
play a video in both IE and firefox browsers, but in IE, it
will not
show the video player controls even though I have added more
than
enough height.
<OBJECT ID="MediaPlayer" WIDTH="208" HEIGHT="300"
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
STANDBY="Loading Windows Media Player components..."
TYPE="application/x-oleobject">
<PARAM NAME="FileName" VALUE="videofilename.wmv">
<PARAM name="autostart" VALUE="true">
<PARAM name="ShowControls" VALUE="true">
<param name="ShowStatusBar" value="false">
<PARAM name="ShowDisplay" VALUE="false">
<EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
NAME="MediaPlayer"
WIDTH="208" HEIGHT="300" ShowControls="1" ShowStatusBar="0"
ShowDisplay="0" autostart="1"> </EMBED>
</OBJECT>

That is an older site but there is a lot of information there
8)
John Malone
=========
"Canned Heat" <[email protected]> wrote in message
news:[email protected]...
|A followup. The site you linked to (mediacollege) does have
a wealth
| of info. However, for anybody else reading this post I did
want to
| point out that it is the same site is where I got the
script (in my
| original post) that didn't work. It was located here:
|
|
http://www.mediacollege.com/video/format/windows-media/streaming/index.html
|
| So I would recommend using Joh's much simpler script, not
the one from
| mediacollege referenced above.
|
| Again, thanks John.
|
|
|
| On Fri, 23 Mar 2007 11:06:56 -0500, "John Malone" <John
Malone@no
| spam.com> wrote:
|
| >Well I couldn't get it to work in IE7..
| >And you get the prompt to "click here to activate this
control"
| >here is a sample >
| >
| >
http://www.xmas-i-am.com/test/video2.htm
Autoplay when page loads.
| >
| >If you look at the source code on the page you will see
I am using an external script
| >file...
| >This takes care of the outlined player (in IE) with the
prompt to "click here to
| >activate".
| >By changing the script you can load the page without
starting the movie.
| >
| >Like this..>
| >
http://www.xmas-i-am.com/test/video.htm
| >
| >Steal the code and the script (test.js or auto.js) and
your good to go...
| >
| >Or look at .....>
| >
| >
http://www.midistudio.com/MPlayer9/index.htm
| >and read how......
| >This is mostly for MIDI music but can work with video
with minimal modifications.
| >
| >Also here is a good site...
| >
http://www.mediacollege.com/video/streaming/formats/
| >You will need to follow the links>> to get a
wealth of information.
| >
| >Hope this helps...
| >
| >Just an after thought...
| >
| >Beware of bandwidth limitations of your site this could
cost you money!!!
| >
| >On that sample site(at the top) is a movie (1.3 Megs)
that is viewed enough to cause
the
| >usage to be about 3 Gigs a month. (now)
| >But at times (September) that goes up to 10~20 Gigs and
at it's peak I had 17 Gigs a
week
| >usage.
| >(It is the 911 Flash movie)
| >
| >Hope this helps......
| >
| >John Malone
| >===============
| >"Canned Heat" <[email protected]> wrote in message
| >news:[email protected]...
| >| Thanks for taking the time to test it. I want to make
sure, tho, that
| >| we're not talking about two different things.
| >|
| >| The script plays videos fine for me too. However, the
problem is that
| >| when playing with IE the video controls such as play,
pause, etc are
| >| not displayed.
| >|
| >| When you played it did you see the controls in IE?
| >|
| >| I have tested it on three machines, ones with the
same IE version as
| >| yours, and I get no controls. I only see the controls
in firefox.
| >|
| >| Thanks,
| >| -Dan
| >|
| >|
| >| On Thu, 22 Mar 2007 15:48:02 -0500, "Eugene J. Maes"
| >| <[email protected]> wrote:
| >|
| >| >Your script works fine in ie 6 with my wmv file.
| >| >
| >| >gene
| >| >"Canned Heat" <[email protected]> wrote in
message
| >|
>news:[email protected]...
| >| >> I'm trying to play a video on a web page. I
got the below script from
| >| >> a website tutorial, but it does not work
correctly. The script will
| >| >> play a video in both IE and firefox
browsers, but in IE, it will not
| >| >> show the video player controls even though I
have added more than
| >| >> enough height.
| >| >>
| >| >> <OBJECT ID="MediaPlayer" WIDTH="208"
HEIGHT="300"
| >| >>
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
| >| >> STANDBY="Loading Windows Media Player
components..."
| >| >> TYPE="application/x-oleobject">
| >| >> <PARAM NAME="FileName"
VALUE="videofilename.wmv">
| >| >> <PARAM name="autostart" VALUE="true">
| >| >> <PARAM name="ShowControls"
VALUE="true">
| >| >> <param name="ShowStatusBar"
value="false">
| >| >> <PARAM name="ShowDisplay"
VALUE="false">
| >| >> <EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
| >| >> NAME="MediaPlayer"
| >| >> WIDTH="208" HEIGHT="300" ShowControls="1"
ShowStatusBar="0"
| >| >> ShowDisplay="0" autostart="1">
</EMBED>
| >| >> </OBJECT>
| >| >
| >|
| >
|

Help with Video Effect: 'Impuls' Zoom

Similar Messages

Maybe you are looking for