Help with Video Loop

Hi
I've been at this for over 24 hours. I have a small video
clip which is embedded in DW and uploaded...
http://www.forpetsake.ca/about2.html
Originally I purchased this ,mov from istockphoto.com and
used QT pro to convert into a .flv. Once converted I brought it
onto the Flash stage. In published settings I selected the 'loop'
option and then exported out to a .swf. Once I embedded this .swf
into my DW page, I uploaded all to my server including the .html
created with the .swf, in fact I uploaded the .flv/.swf/.html into
a seperate folder on my server.
All I want to do is set this movie to loop, maybe pause for a
couple seconds before each loop.
I'm a simple person who only understands simple explanations.
Can someone please walk me through the steps in Flash CS3 to
get this short clip to loop.
ps" The Property Panel selectors (loop-autoplay) make no
changes whatsoever in DW CS3 with respect to this video.
Thanks in advance for any help you can provide.

If you're importing the FLV file into a SWF file (which is
not recommended these days), then just add a gotoAndPlay(1) action
to a keyframe you add at the very end of your Flash timeline.
If, however, you use the FLVPlayback component, you can write
ActionScript to listen for the "complete" event and tell the video
to restart when that event is detected.
Also, use SWFObject (
http://blog.deconcept.com/swfobject)
to embed a SWF into your HTML document. Dreamweaver and Flash's
detection scripts aren't as good. (my two cents)
HTH.

Similar Messages

Help with do loop

do{
if((orderType != 'g') || (orderType != 'w')){
System.out.println("Please enter g or w only.");
}while((orderType == 'g') || (orderType == 'w'));
I need help with this loop... I have to make sure it will be able to pop the input back after the invalid input... i tried to fix it...wont stop and stay in same loop till it gets the valid before go to other loop... how? am i missing something?

I know you've already been answered, but just a bit more...
if((orderType != 'g') || (orderType != 'w'))That would always be true. All characters are either not equal to 'g' or not equal to 'w'.
'x' : neither 'g' nor 'w'. Evaluates to true.
'g' : not 'w', still evaluates to true.
'w': not 'g', still evaluates to true.

Help with video in Flex - Alternative to embedding .flv?

I'm building a Flex application that needs to play a video, which I have in .flv format. I tried the mx:VideoDisplay component, and it was great, but, unfortunately, I need to be able to package the entire application into a single file, and Flex doesn't support embedding .flv files. Next I tried converting the .flv to a .swf, embedding that, then using mx:SWFLoader to display it. This worked, except that I can no longer control the video playback; the video just keeps endlessly looping. I need to be able to stop the video, and ideally I would like access to something like the complete event from mx:VideoDisplay, so that I can hide the video when it has reached the end.
I have tried a couple of solutions based around the idea that the content of the .swf can be treated as a MovieClip, but none of these worked for me. Any ideas?

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Need Help With Video In Flex Mobile

Hi,
I have been searching quite a bit for information on this and have found really nothing useful for my problem. So far, I've converted the actionscript code posted here: http://www.adobe.com/devnet/flash/articles/osmf-media-player.html
to work within my ios mobile project. The problem is that no matter what I have tried, I can hear the video but not see it. That codes uses the OSMF framework, which uses StageVideo I think, so I've tried setting the application background alpha to 0 as has been posted about; still no video though. The project is also set to use direct rendering. I've even tried some bare bones AS code to implement the StageVideo, as others have posted here, but still same thing. So can anyone either show me a working example or provide any suggestions on what I might be doing wrong?
thanks

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Help With Video Pop Up Window.

Hi there Im very new to web design so please understand that I am a complete novice, so my understanding is limited. Any help would be most appreciated.
Could anyone provide me with a piece of code I can put into the HTML snippet function that will allow me from a hyperlink that says "video" to open up this Vimeo video (see below) in a new window that is the exact dimensions of the given video.- Almost like a pop up.
Many thanks to any help,
- preferably I want the appearance of the video to be like the embedd code below regulates: to not include any additional text etc.
<object width="255" height="143"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="255" height="143"></embed></object>
also here is the link to the original page http://vimeo.com/8695239
Thanks again, Robin.

On this page you'll find code to open a page with video in a new window :
http://www.wyodor.net/MoreEmbed/
Click where it says :
Here's a basic sample page with shaded background you can use for testing.
Click to open a window with the pop-up code.

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

NEED HELP WITH VIDEO SOUND PLS

just bought a 30 GB ipod, updated itunes to make the videos compatible. uploaded 3 music videos, they work perfect except they have no sound. dont know what the problem is. i havent' restarted my compute yet, maybe that's it but i highly doubt it. anyones opinion would be highly appreciated. thanks for your help guys.
-MIKE

Neither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it.

Need help with video-scroll

Hello,
I need some help with a project. What I eventually want is that a webcam controls the mouse position and the mouse position
controls a video. But first I would like the part where the mouse position controls the video.
So if the mouse is on the left on your screen the video will be at the first frame and when you move you're mouse to
the right the video will play accordingly to the movement. and stop when the mouse is all the way to the right.
Effectivly the mouse scrolles through the video. It only needs to be on the x-axis.
I'm not that formilliar with flash so any help would be great
Thx!
Thijs

I fixed it in an other way.
Made a imgseq and following code (with some help ):
          stop();
          stage.addEventListener(Event.RESIZE, resizeHandler);
          stage.addEventListener(FullScreenEvent.FULL_SCREEN, resizeHandler);
          stage.addEventListener(MouseEvent.MOUSE_MOVE, inputHandler);
          stage.scaleMode = StageScaleMode.NO_SCALE;
          stage.align = StageAlign.TOP_LEFT;
          var imgSeq:ImgSeq = new ImgSeq();
          var columnWidth;
          var numColumns;
          stage.addChild(imgSeq);
          imgSeq.x = 350
          imgSeq.gotoAndStop(1);
          columnWidth = stage.stageWidth / imgSeq.totalFrames;
          numColumns = stage.stageWidth / columnWidth;
          function resizeHandler(e:Event):void {
          // verdeel het scherm in kolommen, iedere keer dat het scherm geresized wordt.
                    // breedte van 1 kolom (schermbreedte gedeeld door aantal plaatjes)
                    columnWidth = stage.stageWidth / imgSeq.totalFrames;
                    // totaal aantal kolommen dat binnen het scherm past (breedte gedeeld door breedte van één kolom )
                    numColumns = stage.stageWidth / columnWidth;
          function inputHandler(e:MouseEvent):void {
          // voer dit iedere keer dat je de muis beweegt uit.
                    // kijk voor iedere kolom of de muis er binnen valt.
                    for(var i = 1; i <= numColumns; i++){
                              //vergelijking die checkt of de muispositie binnen de waarden van kolom valt.
                              if(mouseX <= i * columnWidth && mouseX >= (i * columnWidth) - columnWidth ){
                                        // zet het framenummer van de imageSequence gelijk aan de huidige kolom.
                                        imgSeq.gotoAndStop(i);
many thx!

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Help with while loops

Im trying to create a while loop that outputs the revers of a string, eg nice one
would be "eno ecin" Assuming i already have declared a variable intital string that holds the string, how do i go about this does anyone have any problem solving techniques. The charAt method needs to be used.

i have a exam on saturday and it was a previous exam question that im trying to get help with i need to understand the course material thanks, i know how to use while loops but have trouble getting my head around this question. ill show you my code however i know its completely wrong.
now i know i hvae to use the charAt method to return a character located at the integer i
so i must go down after each case has been tested true therefore i want i=i-1;
until i=0;
String initialString="tucan";
int i=initialString.length();
while(i>0)
     return charAt();
     i=i-1;
     }

Please help with video streaming

I'm trying to play a video on a web page. I got the below
script from
a website tutorial, but it does not work correctly. The
script will
play a video in both IE and firefox browsers, but in IE, it
will not
show the video player controls even though I have added more
than
enough height.
<OBJECT ID="MediaPlayer" WIDTH="208" HEIGHT="300"
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
STANDBY="Loading Windows Media Player components..."
TYPE="application/x-oleobject">
<PARAM NAME="FileName" VALUE="videofilename.wmv">
<PARAM name="autostart" VALUE="true">
<PARAM name="ShowControls" VALUE="true">
<param name="ShowStatusBar" value="false">
<PARAM name="ShowDisplay" VALUE="false">
<EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
NAME="MediaPlayer"
WIDTH="208" HEIGHT="300" ShowControls="1" ShowStatusBar="0"
ShowDisplay="0" autostart="1"> </EMBED>
</OBJECT>

That is an older site but there is a lot of information there
8)
John Malone
=========
"Canned Heat" <[email protected]> wrote in message
news:[email protected]...
|A followup. The site you linked to (mediacollege) does have
a wealth
| of info. However, for anybody else reading this post I did
want to
| point out that it is the same site is where I got the
script (in my
| original post) that didn't work. It was located here:
|
|
http://www.mediacollege.com/video/format/windows-media/streaming/index.html
|
| So I would recommend using Joh's much simpler script, not
the one from
| mediacollege referenced above.
|
| Again, thanks John.
|
|
|
| On Fri, 23 Mar 2007 11:06:56 -0500, "John Malone" <John
Malone@no
| spam.com> wrote:
|
| >Well I couldn't get it to work in IE7..
| >And you get the prompt to "click here to activate this
control"
| >here is a sample >
| >
| >
http://www.xmas-i-am.com/test/video2.htm
Autoplay when page loads.
| >
| >If you look at the source code on the page you will see
I am using an external script
| >file...
| >This takes care of the outlined player (in IE) with the
prompt to "click here to
| >activate".
| >By changing the script you can load the page without
starting the movie.
| >
| >Like this..>
| >
http://www.xmas-i-am.com/test/video.htm
| >
| >Steal the code and the script (test.js or auto.js) and
your good to go...
| >
| >Or look at .....>
| >
| >
http://www.midistudio.com/MPlayer9/index.htm
| >and read how......
| >This is mostly for MIDI music but can work with video
with minimal modifications.
| >
| >Also here is a good site...
| >
http://www.mediacollege.com/video/streaming/formats/
| >You will need to follow the links>> to get a
wealth of information.
| >
| >Hope this helps...
| >
| >Just an after thought...
| >
| >Beware of bandwidth limitations of your site this could
cost you money!!!
| >
| >On that sample site(at the top) is a movie (1.3 Megs)
that is viewed enough to cause
the
| >usage to be about 3 Gigs a month. (now)
| >But at times (September) that goes up to 10~20 Gigs and
at it's peak I had 17 Gigs a
week
| >usage.
| >(It is the 911 Flash movie)
| >
| >Hope this helps......
| >
| >John Malone
| >===============
| >"Canned Heat" <[email protected]> wrote in message
| >news:[email protected]...
| >| Thanks for taking the time to test it. I want to make
sure, tho, that
| >| we're not talking about two different things.
| >|
| >| The script plays videos fine for me too. However, the
problem is that
| >| when playing with IE the video controls such as play,
pause, etc are
| >| not displayed.
| >|
| >| When you played it did you see the controls in IE?
| >|
| >| I have tested it on three machines, ones with the
same IE version as
| >| yours, and I get no controls. I only see the controls
in firefox.
| >|
| >| Thanks,
| >| -Dan
| >|
| >|
| >| On Thu, 22 Mar 2007 15:48:02 -0500, "Eugene J. Maes"
| >| <[email protected]> wrote:
| >|
| >| >Your script works fine in ie 6 with my wmv file.
| >| >
| >| >gene
| >| >"Canned Heat" <[email protected]> wrote in
message
| >|
>news:[email protected]...
| >| >> I'm trying to play a video on a web page. I
got the below script from
| >| >> a website tutorial, but it does not work
correctly. The script will
| >| >> play a video in both IE and firefox
browsers, but in IE, it will not
| >| >> show the video player controls even though I
have added more than
| >| >> enough height.
| >| >>
| >| >> <OBJECT ID="MediaPlayer" WIDTH="208"
HEIGHT="300"
| >| >>
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
| >| >> STANDBY="Loading Windows Media Player
components..."
| >| >> TYPE="application/x-oleobject">
| >| >> <PARAM NAME="FileName"
VALUE="videofilename.wmv">
| >| >> <PARAM name="autostart" VALUE="true">
| >| >> <PARAM name="ShowControls"
VALUE="true">
| >| >> <param name="ShowStatusBar"
value="false">
| >| >> <PARAM name="ShowDisplay"
VALUE="false">
| >| >> <EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
| >| >> NAME="MediaPlayer"
| >| >> WIDTH="208" HEIGHT="300" ShowControls="1"
ShowStatusBar="0"
| >| >> ShowDisplay="0" autostart="1">
</EMBED>
| >| >> </OBJECT>
| >| >
| >|
| >
|

Need help with video uploading in flex 4

hey guys... so i need to create a video uploading application... with video chunking...
basically i need to break up the video file (may be 1Gig or more in size) in pieces and send it to the server using a method i call from my webservice...
any ideas??
i believe this process is called chunking... not sure how to do this...
thank you very much in advance!!!

dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

Need help with Video Categories Movies, Music Videos, ETC.

Is there anyway to put ripped videos into other categories besides just Movies? I would like to put some of them under Music Videos, is that possible?

Neither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it.

Need help with video installation

Hi,
I'm no DW guru, as I know just enough to do some damage... so I did
Anyhow, I am trying to install a video into my (ahem) purchased responsive web template, but each time I try a new approach, I keep getting "Invalid Source" when I "F12" it -- Any Ideas?

It might be better to test video in a plain, unstyled web page first to ascertain exactly where your problems are.
Below is all the code necessary for a responsive HTML5 video player. Change YourVideo.mp4, .ogv and .webm to your actual path & video file names.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>

<style>
video {width:100%;}
</style>
</head>
<body>



<video controls>
     <source src="YourVideo.mp4" type='video/mp4' />
      <source src="YourVideo.webm" type='video/webm' />
      <source src="YourVideo.ogv" type='video/ogg' />
</video>

</body>
</html>
Nancy O.

Need help with while loop format

I'm building a form - everything works but I would like to change the way the data is output into the table.
In other scripting languages, like PHP, you had 2 different ways of dealing with a loop:
<?
do while xyz
do something here
?>
- OR -
<? do while xyz:?>
do something here
<?end while ?>
I would like to do something similar to the 2nd example in .jsp but I'm not sure of the format or how to stop the loop. From the tutorial, I'm using
<%
while(SQLResult.next())
UId = SQLResult.getString("uid");
FName = SQLResult.getString("fname");
LName = SQLResult.getString("lname");
out.println("<tr><td>" + UId + "</td><td>" + FName + "</td><td>" + LName
+ "</td></tr>");
%>
Could anyone point me in the right direction? I'd prefer it if I didn't have to build the table like this if I don't have to but haven't found anything anywhere telling me otherwise.
Thanks so much.
Bob

Sorry - the answer was in JSP:Java Server Pages by Barry Burd. I had just gotten the output format wrong.

Help with Video Loop

Similar Messages

Maybe you are looking for