Help with Video projector connection

I bought a Brookstone HDMI projector to connect to a MacBook Pro and the Belkin adapter. I get perfect video but no audio. Am I missing something?

Does the projector and/or your MBP support audio over HDMI? Some of the slightly older MBP's don't and you would need to run a cable from your audio out port to the projectors audio in.

Similar Messages

Need help with thinkvantage access connection

Here a log file with new access connection:
Connection status:  Disconnected
Cause:  Driver disconnected while associating.
Error code:  229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type  Wireless LAN
Adapter speed  54.0 Mbps
Driver/Firmware version  7.6.0.96/ N/A
Adapter status  Enabled
Connection Status  Disconnected
Disable unused cards?  Yes
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  Yes
Register connection's DNS suffix in registration?  Yes
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  linksys
Connection type  Access point
Wireless mode  Auto
Security encryption  None
System Information
System model  7732CTO
BIOS version  7LETB7WW (2.17 )
Operating system version  Windows Vista, Service pack 2
Access connections version  5.31
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
linksys                          802.11g        00:1C:10:54:65:B6              24%            11
Global Settings
Network
Allow all users of this system to switch to any existing location profile  -> No
Allow the wireless LAN radio to be turned off when inactive  -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Enable autodeletion of unused profiles  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Preferences
Enable sound effects  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Show WiMAX page as default on Main GUI  -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
No                  1     linksys                                                          Wireless LAN                     SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?

Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check.

Need Help With Video In Flex Mobile

Hi,
I have been searching quite a bit for information on this and have found really nothing useful for my problem. So far, I've converted the actionscript code posted here: http://www.adobe.com/devnet/flash/articles/osmf-media-player.html
to work within my ios mobile project. The problem is that no matter what I have tried, I can hear the video but not see it. That codes uses the OSMF framework, which uses StageVideo I think, so I've tried setting the application background alpha to 0 as has been posted about; still no video though. The project is also set to use direct rendering. I've even tried some bare bones AS code to implement the StageVideo, as others have posted here, but still same thing. So can anyone either show me a working example or provide any suggestions on what I might be doing wrong?
thanks

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Help With Video Pop Up Window.

Hi there Im very new to web design so please understand that I am a complete novice, so my understanding is limited. Any help would be most appreciated.
Could anyone provide me with a piece of code I can put into the HTML snippet function that will allow me from a hyperlink that says "video" to open up this Vimeo video (see below) in a new window that is the exact dimensions of the given video.- Almost like a pop up.
Many thanks to any help,
- preferably I want the appearance of the video to be like the embedd code below regulates: to not include any additional text etc.
<object width="255" height="143"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clipid=8695239&server=vimeo.com&show_title=0&show_byline=0&showportrait=0&color=0&fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="255" height="143"></embed></object>
also here is the link to the original page http://vimeo.com/8695239
Thanks again, Robin.

On this page you'll find code to open a page with video in a new window :
http://www.wyodor.net/MoreEmbed/
Click where it says :
Here's a basic sample page with shaded background you can use for testing.
Click to open a window with the pop-up code.

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

NEED HELP WITH VIDEO SOUND PLS

just bought a 30 GB ipod, updated itunes to make the videos compatible. uploaded 3 music videos, they work perfect except they have no sound. dont know what the problem is. i havent' restarted my compute yet, maybe that's it but i highly doubt it. anyones opinion would be highly appreciated. thanks for your help guys.
-MIKE

Neither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it.

Need help with video-scroll

Hello,
I need some help with a project. What I eventually want is that a webcam controls the mouse position and the mouse position
controls a video. But first I would like the part where the mouse position controls the video.
So if the mouse is on the left on your screen the video will be at the first frame and when you move you're mouse to
the right the video will play accordingly to the movement. and stop when the mouse is all the way to the right.
Effectivly the mouse scrolles through the video. It only needs to be on the x-axis.
I'm not that formilliar with flash so any help would be great
Thx!
Thijs

I fixed it in an other way.
Made a imgseq and following code (with some help ):
          stop();
          stage.addEventListener(Event.RESIZE, resizeHandler);
          stage.addEventListener(FullScreenEvent.FULL_SCREEN, resizeHandler);
          stage.addEventListener(MouseEvent.MOUSE_MOVE, inputHandler);
          stage.scaleMode = StageScaleMode.NO_SCALE;
          stage.align = StageAlign.TOP_LEFT;
          var imgSeq:ImgSeq = new ImgSeq();
          var columnWidth;
          var numColumns;
          stage.addChild(imgSeq);
          imgSeq.x = 350
          imgSeq.gotoAndStop(1);
          columnWidth = stage.stageWidth / imgSeq.totalFrames;
          numColumns = stage.stageWidth / columnWidth;
          function resizeHandler(e:Event):void {
          // verdeel het scherm in kolommen, iedere keer dat het scherm geresized wordt.
                    // breedte van 1 kolom (schermbreedte gedeeld door aantal plaatjes)
                    columnWidth = stage.stageWidth / imgSeq.totalFrames;
                    // totaal aantal kolommen dat binnen het scherm past (breedte gedeeld door breedte van één kolom )
                    numColumns = stage.stageWidth / columnWidth;
          function inputHandler(e:MouseEvent):void {
          // voer dit iedere keer dat je de muis beweegt uit.
                    // kijk voor iedere kolom of de muis er binnen valt.
                    for(var i = 1; i <= numColumns; i++){
                              //vergelijking die checkt of de muispositie binnen de waarden van kolom valt.
                              if(mouseX <= i * columnWidth && mouseX >= (i * columnWidth) - columnWidth ){
                                        // zet het framenummer van de imageSequence gelijk aan de huidige kolom.
                                        imgSeq.gotoAndStop(i);
many thx!

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Help with video in Flex - Alternative to embedding .flv?

I'm building a Flex application that needs to play a video, which I have in .flv format. I tried the mx:VideoDisplay component, and it was great, but, unfortunately, I need to be able to package the entire application into a single file, and Flex doesn't support embedding .flv files. Next I tried converting the .flv to a .swf, embedding that, then using mx:SWFLoader to display it. This worked, except that I can no longer control the video playback; the video just keeps endlessly looping. I need to be able to stop the video, and ideally I would like access to something like the complete event from mx:VideoDisplay, so that I can hide the video when it has reached the end.
I have tried a couple of solutions based around the idea that the content of the .swf can be treated as a MovieClip, but none of these worked for me. Any ideas?

Hi, Keith Lee -
I'm sorry that I cannot help with your problem, but I'm posting a few URLs that may perhaps help -
Working with video: http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e1a.html
Getting started with stage video: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
Stage video articles and tutorials: http://www.adobe.com/devnet/flashplayer/stagevideo.html
ActionScript reference: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/StageVideo. html
Thanks,
Mallika Yelandur
Adobe Community Help & Learning

Please help with video streaming

I'm trying to play a video on a web page. I got the below
script from
a website tutorial, but it does not work correctly. The
script will
play a video in both IE and firefox browsers, but in IE, it
will not
show the video player controls even though I have added more
than
enough height.
<OBJECT ID="MediaPlayer" WIDTH="208" HEIGHT="300"
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
STANDBY="Loading Windows Media Player components..."
TYPE="application/x-oleobject">
<PARAM NAME="FileName" VALUE="videofilename.wmv">
<PARAM name="autostart" VALUE="true">
<PARAM name="ShowControls" VALUE="true">
<param name="ShowStatusBar" value="false">
<PARAM name="ShowDisplay" VALUE="false">
<EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
NAME="MediaPlayer"
WIDTH="208" HEIGHT="300" ShowControls="1" ShowStatusBar="0"
ShowDisplay="0" autostart="1"> </EMBED>
</OBJECT>

That is an older site but there is a lot of information there
8)
John Malone
=========
"Canned Heat" <[email protected]> wrote in message
news:[email protected]...
|A followup. The site you linked to (mediacollege) does have
a wealth
| of info. However, for anybody else reading this post I did
want to
| point out that it is the same site is where I got the
script (in my
| original post) that didn't work. It was located here:
|
|
http://www.mediacollege.com/video/format/windows-media/streaming/index.html
|
| So I would recommend using Joh's much simpler script, not
the one from
| mediacollege referenced above.
|
| Again, thanks John.
|
|
|
| On Fri, 23 Mar 2007 11:06:56 -0500, "John Malone" <John
Malone@no
| spam.com> wrote:
|
| >Well I couldn't get it to work in IE7..
| >And you get the prompt to "click here to activate this
control"
| >here is a sample >
| >
| >
http://www.xmas-i-am.com/test/video2.htm
Autoplay when page loads.
| >
| >If you look at the source code on the page you will see
I am using an external script
| >file...
| >This takes care of the outlined player (in IE) with the
prompt to "click here to
| >activate".
| >By changing the script you can load the page without
starting the movie.
| >
| >Like this..>
| >
http://www.xmas-i-am.com/test/video.htm
| >
| >Steal the code and the script (test.js or auto.js) and
your good to go...
| >
| >Or look at .....>
| >
| >
http://www.midistudio.com/MPlayer9/index.htm
| >and read how......
| >This is mostly for MIDI music but can work with video
with minimal modifications.
| >
| >Also here is a good site...
| >
http://www.mediacollege.com/video/streaming/formats/
| >You will need to follow the links>> to get a
wealth of information.
| >
| >Hope this helps...
| >
| >Just an after thought...
| >
| >Beware of bandwidth limitations of your site this could
cost you money!!!
| >
| >On that sample site(at the top) is a movie (1.3 Megs)
that is viewed enough to cause
the
| >usage to be about 3 Gigs a month. (now)
| >But at times (September) that goes up to 10~20 Gigs and
at it's peak I had 17 Gigs a
week
| >usage.
| >(It is the 911 Flash movie)
| >
| >Hope this helps......
| >
| >John Malone
| >===============
| >"Canned Heat" <[email protected]> wrote in message
| >news:[email protected]...
| >| Thanks for taking the time to test it. I want to make
sure, tho, that
| >| we're not talking about two different things.
| >|
| >| The script plays videos fine for me too. However, the
problem is that
| >| when playing with IE the video controls such as play,
pause, etc are
| >| not displayed.
| >|
| >| When you played it did you see the controls in IE?
| >|
| >| I have tested it on three machines, ones with the
same IE version as
| >| yours, and I get no controls. I only see the controls
in firefox.
| >|
| >| Thanks,
| >| -Dan
| >|
| >|
| >| On Thu, 22 Mar 2007 15:48:02 -0500, "Eugene J. Maes"
| >| <[email protected]> wrote:
| >|
| >| >Your script works fine in ie 6 with my wmv file.
| >| >
| >| >gene
| >| >"Canned Heat" <[email protected]> wrote in
message
| >|
>news:[email protected]...
| >| >> I'm trying to play a video on a web page. I
got the below script from
| >| >> a website tutorial, but it does not work
correctly. The script will
| >| >> play a video in both IE and firefox
browsers, but in IE, it will not
| >| >> show the video player controls even though I
have added more than
| >| >> enough height.
| >| >>
| >| >> <OBJECT ID="MediaPlayer" WIDTH="208"
HEIGHT="300"
| >| >>
CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
| >| >> STANDBY="Loading Windows Media Player
components..."
| >| >> TYPE="application/x-oleobject">
| >| >> <PARAM NAME="FileName"
VALUE="videofilename.wmv">
| >| >> <PARAM name="autostart" VALUE="true">
| >| >> <PARAM name="ShowControls"
VALUE="true">
| >| >> <param name="ShowStatusBar"
value="false">
| >| >> <PARAM name="ShowDisplay"
VALUE="false">
| >| >> <EMBED TYPE="application/x-mplayer2"
SRC="videofilename.wmv"
| >| >> NAME="MediaPlayer"
| >| >> WIDTH="208" HEIGHT="300" ShowControls="1"
ShowStatusBar="0"
| >| >> ShowDisplay="0" autostart="1">
</EMBED>
| >| >> </OBJECT>
| >| >
| >|
| >
|

Need help with video uploading in flex 4

hey guys... so i need to create a video uploading application... with video chunking...
basically i need to break up the video file (may be 1Gig or more in size) in pieces and send it to the server using a method i call from my webservice...
any ideas??
i believe this process is called chunking... not sure how to do this...
thank you very much in advance!!!

dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

Need help with Video Categories Movies, Music Videos, ETC.

Is there anyway to put ripped videos into other categories besides just Movies? I would like to put some of them under Music Videos, is that possible?

Neither Quicktime Pro or iTunes have the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Videora iPod Converter seems to be popular amongst Windows users, although I've read that you might get mixed results using it.

Need help with video installation

Hi,
I'm no DW guru, as I know just enough to do some damage... so I did
Anyhow, I am trying to install a video into my (ahem) purchased responsive web template, but each time I try a new approach, I keep getting "Invalid Source" when I "F12" it -- Any Ideas?

It might be better to test video in a plain, unstyled web page first to ascertain exactly where your problems are.
Below is all the code necessary for a responsive HTML5 video player. Change YourVideo.mp4, .ogv and .webm to your actual path & video file names.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>

<style>
video {width:100%;}
</style>
</head>
<body>



<video controls>
     <source src="YourVideo.mp4" type='video/mp4' />
      <source src="YourVideo.webm" type='video/webm' />
      <source src="YourVideo.ogv" type='video/ogg' />
</video>

</body>
</html>
Nancy O.

Need Help With Videos on Zen V P

I need help putting videos on my Creative Zen V Plus. I convert them to avi using Super Converter and I drag and drop them into the folder for the videos on my zen. When I turn on my Zen and go to the videos the video is there however when I try to play it it says video format not supported.

Original?Creative software after internet upgrades easy convert any video to Zen format and automaticaly transfere it to player.

Help with Video projector connection

Similar Messages

Maybe you are looking for