Help with vusb and printer

Recently purchased an EA4500 router. I'm using an old HP 4L laserjet and have it connected to the router via the USB port. I have 2 Mac's and installed vusb on both. I can successfully print from both Mac's, however I have to manually disconnect and connect the printer in the vusb client. I can't get the auto-connect and auto-disconnect settings to work by themselves. Any guidance on the proper settings here?
Additionally, do I need to configure the printer driver though the vusb client? When I click "configure", I get an error saying"Cannot connect to Prolific Technology Inc. IEEE-1284 Controller. Please try again later"
Thanks in advance
Mac #1 OS 10.7
Mac #2 OS 10.6
HP 4L LaserJet

VUSB printing would work fine if you use a USB printer. I think it is time for you to get a new printer . By the way, just in case you decide to buy a new one, consider buying the tested ones. Click on the link to know printers that are tested to work with this router.
Tested HDD and Printers for the EA4500

Similar Messages

Help with exporting and printing

I only recently started to use FW and I am stuck and can't
find an answer. First whenever I go to print a item through FW it
is always to big for the paper. I know I can shrink it but wouldn't
that look different. Second I export it as a jpeg and import it
into word 03, fit it to the size of the page, but when I print it
it comes out blurry and hardly readable. does anyone know why it
does that and how to fix it? Please help.

On Wed, 27 Sep 2006 23:22:04 +0400, fallenanbu
<[email protected]> wrote:
> I only recently started to use FW and I am stuck and
can't find an
> answer.
> First whenever I go to print a item through FW it is
always to big for
> the
> paper. I know I can shrink it but wouldn't that look
different. Second I
> export
> it as a jpeg and import it into word 03, fit it to the
size of the page,
> but
> when I print it it comes out blurry and hardly readable.
does anyone
> know why
> it does that and how to fix it? Please help.
>
I guess your problem is too small resolution. Create youre
image at
resolution like 200 ppi. As long as I remember Word 2003
correctly reads
PNG resolution, so after creating and saving the image you
may try simply
importing the image saved in FW into Word.
Ilya Razmanov
http://photoshop.msk.ru -
Photoshop plug-in filters

Issues with connection and Printer

Hi guys,
I have two issues going on, but one of them is not related to security but I want to through out there to see if anybody can answer it or suggest me an appropriate thread.
First question:
Can anybody tell me how set up a printer in ECC 6.0, Please tell me step by step. Its related with iw32 and printing. Please explain over all I never setup printer through SAP.
My another question is more of a Basis question since I cant find a basis thread Im posting here,
The developer trying to connect to courion but some how the Courion connector did not work so we added sap_all, sap_new to the courion ID but it worked once and then its not working again.
I was wondering if anybody has any idea about this. Please give me some thought or recommendation. (Courion is some other software)
Thank you so much for any help in advance

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

HT4199 I need help with getting my printer to print, PLEASE.

I need help with getting my printer to print, Please.

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with Zebra Label Printer and Multi Order Shipping Tool- Partial Label Printing

I have a zebra gx420d which is compatible the zebra 2844 (its the new model) and I am having a hard time printing labels with the multi order shipping tool. I have the correct driver, the printer test page works fine, and everything is configured for a 4x6 label.
I have set the selling preferences in paypal to match the zebra 2844 printer and within the mult order tool, I have edited the settings to also match zebra 2844.
My problem is that regardless of what or how I do it, my printer will only print a 1/4 of the label. It is not shrinking the label, it is starting to print at the correct size but stops 1/4 of the way through. Almost like it thinks my label size is too small but as i mentioned, I confirmed 4x6 on the label settings at both printer properties and printer preferences. I spent and hour on tech support with zebra and they confirmed the printer is working as it is supposed to. I also know this because my Amazon labels print correctly as well. Its only paypal and ebay labels that are not working. Very frustrating. Can anyone help?

Hi,
did you upload the desgin in a standard text with option ITF? This you can copy then to the layoutset. At least this is the way of working with BARONE.
Cheers,
Stefan

Help needed with MMAPI and print values to screen

Hi,
Using the RingToneConverter, I want to print out the values to the screen that the ring tone has. The values I want printed are actually any values at all! I am not picky at this point!
Can anyone help with this? I would like it so that while the ringtone is playing the the "simple player", the values are somewhere on screen appearing. Or even after the song is finished, the values come up on screen.
Thank you,
Mike

Sorry, i don't mean that..
as i say, as3 read the data from file sorting like that:
1,john,ny
2,jessy,cal
3,smith,nj
how can i pass those values to the textboxes . id , name , address
so i can go next and previous
thank you again..

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Help with encapsulation and a specific case of design

Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
   Each kanji is defined by:
   - a single character (the kanji itself); and
   - multiple readings which fall into two categories of "on" and "kun".
      Each reading is defined by:
      - A string of hiragana or katakana (Japanese phoenetic characters); and
      - Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
   - custom KanjiEntry objects that each hold
      - a kanji in a primitive char value; and
      - two (on, kun) arrays or Vectors of custom Reading objects that hold
         - the reading in a String; and
         - statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on",   // which set of readings
2,      // which element in that array or Vector
"score", // which statistic
98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
Drake

Usually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          char theKanji = currentKanjiEntry.getKanji();
          String theReading = currentKanjiEntry.getReading();
          // build and show a flashcard based on theKanji and theReading
          // use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake

Help with looping and counting

i am in a CS 1 class and need help with this loop
/*Write a program that will allow the user to enter a character
          until the capital letter Z is entered
     The program should count the number of letters entered
          and print the total after the loop is completed*/
here is what i have it doesn't end nor does it count and i don't know hwo to make it count also i suck at do..while loops hehe
char b,Z=0;
          Scanner a = new Scanner(System.in);
     do
               System.out.print("Enter a letter: "+"\n");
               b=a.next().charAt(0);
          while (b !=Z);
i know that its not even close to being right just help me out here
Edited by: purplesmurf on Nov 14, 2008 7:25 PM

The following program will count the number of chacters entered until Z is enetered.
import java.io.*;
class count
     public static void main(String[] args)throws IOException
          char ch;
          int cnt=0;
          DataInputStream br=new DataInputStream(System.in);
          do
          System.out.print("Enter a character:");
          ch=(char)br.read();
          if(ch!='Z')
               cnt++;
          else
               break;
          }while((ch=(char)br.read())!='Z');
          System.out.println("The Number of entered characters are:"+cnt);
}

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Help With HP Network Printer

Hello,
Just got my new Imac 21" and it is awesome. Issue I am having is that it is replacing a Windows PC that had a wired network printer attached and worked fine. Printer is a HP All In One 6100C. I can ping the printer ip, I can also bring up the printer in a browser with ip. But when I go to add the printer, I enter the IP address, and it comes back as not seeing the printer? I have tried protocol Line Printer and IPP? I must be missing something. Any help would be appreciated.
Thanks JR

So is the printer attached directly to your iMac, or is it attached to a router? Mine is attached to the Mac with USB and then shared with the other computers in the house over the LAN. Works great.
Dah•veed

Help with vusb and printer

Similar Messages

Maybe you are looking for