Help With Webservices for BankAccountStatementNotification_In

Hello All,
Want to use the webservice BankAccountStatementNotification_In from PI to upload bank statements into R/3.
Found the webservice under the package FSCMBNK_XI_PROXY, proxy name "II_BNK_BANK_ACCOUNT_STATEMENT1".
When I try checking the proxy in R/3 getting an error "Unable to find software component version for namespace http://sap.com/xi/APPL/SE/Global".
Also on trying to execute the Service Interface " No Service Definition found for Interface II_BNK_BANK_ACCOUNT_STATEMENT1."
1. Could anyone please suggest what are things that I should be checking for to avoid the above errors.
2. Steps in PI to call this webservice, I will be reading the txt files from one of the PI directories and send them to target R/3 via webservice. .
--Prashanth

>
Srinivas wrote:
> Hi Prashanth,
> 4. Now identify the web service definition from the proxy
> 5. Open SOAMANAGER and search for the service definition , use internal as search creteria, you will be able to see
> BankAccountStatementNotification_In service there.
> 6. Now you need to create the end points for the selected service.
> 7, test using the WSnavigator
>
> You can refer the soamanager and testing part in this blog /people/shibaji.chandra3/blog/2010/02/17/soa-web-service-expose-and-consume-configuration-with-soamanager
>
> Regards,
> Srinivas
Hi Srinivas,
Got through until step3, I actually imported the wrong content into ESR of PI. So now I can see my service interface BankAccountStatementNotification_In under the http://sap.com/xi/APPL/SE/Global namespace.
But Cannot find my service definition in SOAMANAGER. Under
Application and Scenario Communication -> Single Service Administration -> Search
Am I missing any step of creating a service definition.
--Prashanth

Similar Messages

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I need help with my for loop in this array

Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
    public static void main (String[] args)
        String timeStr;
        int time, again, optiStr;
        Inbound[] in = new Inbound[25];
         in[0]=new Inbound ("",0,"On Time num0");
         in[1]=new Inbound ("",2,"On Time num1");
         in[2]=new Inbound ("",3,"Delayed num2");
         in[3]=new Inbound ("",4,"On Time");
         in[4]=new Inbound ("",5,"On Time");
         in[5]=new Inbound ("",6,"Canceled");
         in[6]=new Inbound ("",1,"Canceled num6");
         in[7]=new Inbound ("",8,"On Time");
         in[8]=new Inbound ("",9,"Delayed");
         in[9]=new Inbound ("",10,"On Time");
         in[10]=new Inbound ("",11,"Delayed");
         in[11]=new Inbound ("",12,"On Time");
         in[12]=new Inbound ("",13,"Delayed");
         in[13]=new Inbound ("",14,"On Time");
         in[14]=new Inbound ("",15,"On Time");
         in[15]=new Inbound ("",16,"On Time");
         in[16]=new Inbound ("",17,"Canceled");
         in[17]=new Inbound ("",18,"On Time");
         in[18]=new Inbound ("",19,"On Time");
         in[19]=new Inbound ("",20,"Canceled");
         in[20]=new Inbound ("",21,"On Time");
         in[21]=new Inbound ("",22,"Delayed");
         in[22]=new Inbound ("",23,"On Time");
         in[23]=new Inbound ("",24,"Cancled");
         in[24]=new Inbound ("",7,"On Time num24");
        do{
            timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
            time = Integer.parseInt(timeStr);
            if (time<=0 || time>24)
             JOptionPane.showMessageDialog (null, "Error");
             optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
            if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
                for (int index = 0; index < in.length; index++)
                  if ( time == Inbound.getTime())
               JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
//               else JOptionPane.showMessageDialog (null, "else");
            }//temp return else if failed to find time asked for
//             else
//               if (optiStr==JOptionPane.CANCEL_OPTION)
//                 JOptionPane.showMessageDialog(null,"Canceled");
//              else
//                {Outbound.run();
//                JOptionPane.showMessageDialog (null, "outbound");}//temp
              again=JOptionPane.showConfirmDialog(null, "Try again?");
        while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.

rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Need Help With Download For Airport Express

Ok, computer dummy here needing help with airport express. We were given airport express last night from a friend who recently purchased a newer gadget. He told us we would need to come here to download the operating system. I see lots of links to updates but no links for someone like me who has never had anything like this on my computer before. Does anyone know what link I would need to use? We have a pc with windows XP. Thanks so much for your help!

Hello jesschambers. Welcome to the Apple Discussions!
The AirPort Express Base Station (AX) doesn't have an "operating system" per se, but it does have built-in firmware which pretty much is the same thing. In addition, in order to administer the AX, you will need the AirPort Admin Utility for your Windows PC.
Here are the links for the latest versions of both:
o AirPort Express Firmware Update 6.3 for Windows
o AirPort 4.2 for Windows

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Need help with pagination for book

I am working on a book and need help with the pagination. I was able to make the TOC and front matter show the numbers as Roman numerals, and the body of the text as Arabic numerals, but I can't figure out how to restart the numbering sequence for the body of the text. So the front matter is numbered i-xvi, and the text is 17-681. I need the text to start with the number 1. Each subsequent chapter is a section break as well, if that makes a difference.
Many thanks,
J

Click on the page that shall start on number one. Open Inspector palette > Layout inspector (2nd tab) >
Section > Start at: > 1

Need help with coding for HTML5 Video with Flash fallback

Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?

The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
Change the 1st line in your .html file from:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to:
<!DOCTYPE html>
Then see if your HTML5 video types load with <video> tag.

Need help with as3 for popup window

I am nearing the end of the semester in my Flash Animation class. I have learned very simple AS3 things, code snippets etc. I am trying to find the actionscript for coding a very simple popup window, but have not found a clue.
Here's what I want to do...I have a white box with some type on the stage. When a person clicks on the white box, I want a popup to open that is larger, that will contain the same type but larger. That box will have an x so it can be dismissed. I don't want to do this in html, only in Flash CS5. I don't want a browser window, I just want a bigger version of the smaller box. I know how to build both boxes, just don't know how to write the code. I know there will be an on-click mouse event listener, and then I am lost.
Can anyone help with the code I might use? It would be most appreciated.

It would be something along the lines of... (using instance names relative to your description)...
popup.visible = false;
whiteBox.addEventListener(MouseEvent.CLICK, showPopup);
function showPopup(evt:MouseEvent):void {
popup.visible = true;
popup.popupX.addEventListener(MouseEvent.CLICK, hidePopup);
function hidePopup(evt:MouseEvent):void {
popup.visible = false;

I need help with searching for an image inside another image

I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
Winner takes all. First person to solve this gets 10 dukes.
Please help.

Hi,
I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article.

Help with expression for business days

Dear Frends,
I need help with business days expression.
The report is for call center operation. Whenever a user calls in and opens an issue it is recorded as a case. And each case is associated with create time and valueofone(which is always one).
My report contains 'case type' as the first column, and rest of the columns are age buckets(col1: 0-5 days, col2: 6-10 days). By saying agebuckets I mean number of days between create date and current date. All the cases that are less than 5 days older will go to first column and similarly all the cases that are 6-10 days old will go to the second column and so on.
In a normal case I use the following case statement: case when daysbetween(current_date, create_date) between x1 and x2 then count(valueofone) else null end
But I need to calculate only the business days as age, so I need an expression look something like this: case when (_days_between(current_date, create_date)-no of holidays) between x1 and x2 then count(valueofone) else null end
Note: My calendar table has a column 'Business Day' which assigns 'Y' to Business day and 'N' to holiday.
Any help with this expression or any suitable way.
Regards
Chilla

If you have a calendar table, wouldn't your function be just
CREATE FUNCTION business_days_between( p_day1 IN DATE, p_day2 IN DATE )
RETURN NUMBER
IS
l_cnt NUMBER;
BEGIN
SELECT COUNT(*)
    INTO l_cnt
    FROM calendar_table ct
   WHERE ct.business_day = 'Y'
     AND ct.<<date column>> >= trunc(p_day1)
     AND ct.<<date column>> < trunc(p_day2);
RETURN l_cnt;
END;Basially, count the number of rows in your calendar table that are business days between the two dates.
Justin

Help with Audio for Premiere Project

Working on a lengthy project and need some help with audio which is not my specialty!
I am recording using a Sony EX1r and a wireless lav mic,     OK. Here is what is happening.
When I import the clip into project I get Audio from the left speaker.   If I burn a DVD and playback on home player with surround sound, I get audio out of just the left speaker which makes sense.    SO I go to Premier and use "Fill Left" which fixes the audio on my computer and get sound from left and right speakers.    The odd thing is that when I play this version back from DVD on the surround sound system, the audio now only comes from the CENTER speaker. I dont get anything out of left OR the right speaker so it sounds hollow.
I am sure I am missing something obvious so please be kind.
Is there an easy way to get my audio to come out of Left, Center, and Right speakers (and rear for that matter) ???
Thank you
Ted

Bill,
The DVD player is a Sony BluRay and the receiver is an Onkyo AV receiver HT-R380.
My thinking is that it is something that I am doing wrong inside Premiere vs something that the DVD player or receiver is doing.    My final product will need to play on a variety of DVD players so I need to get it right.
It just seems odd that my default output DVD provides sound to the left speaker but then removes it when I fill Left.
Am I setting up my audio tracks wrong? Or should I being doing something with a 5.1 track???
Thanks
Ted

Urgent-Need help with code for Master data enhancement

hi Experts,
I have appended YMFRGR field(Table MARC) to 0MAT_PLANT_ATTR datasource.
The key fields in the MARC table are MATNR and WERKS.Can anybody help with the user exit to populate this field,as am pretty new to ABAP.
Thanks in advance

Hi,
go through this link which has the similar problem:
https://forums.sdn.sap.com/click.jspa?searchID=1331543&messageID=2794783
hope it helps.
Thanks,
Amith

Sender SOAP Adapter issue with webservices for authorization.

Hi All
Issue:
As we are developing a Web Service to fetch account balance from SAP(upon receiving the account no from client) and have given the wsdl file to J2EE application to call or make use of the service. But as a part of that service they expect userid/password to be entered manually from client pop-up. At this point of time, we don't want to enter userid/password manually but we want this to be hardcoded/embedded in Webservice so that there is no need of manual intervention upon calling this service.
Actual Requirement:
From Webservices to R/3-ECC6.0-IS-Banking-RFC (Synchronous Interface)
Sender: SOAP Adapter synchronous
Receiver: RFC Adapter synchronous
Note: Requesting a account number and getting response from RFC is account Balance and Date to webservice
Regards
Kiran kumar.s

Hi praveen,
Thanks for ur reply.What you said is exactly right but for time being i have to make the client not get the authorization(password--Username and password(pop-up)) when he invokes the WSDL into webservice for that u told that to write some hardcode in J2EE application,but i don't know that where to write and what to write.so, if possible can u give me the code and procedure.
This is the URL:
http://hcl3sap:50000/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_SOAPSENDER
Regards,
kiran kumar.

Help With Webservices for BankAccountStatementNotification_In

Similar Messages

Maybe you are looking for