Help with website i've built in photoshop CS3

Hello I am VERY new to designing my web site, so please be patient.
I have strong knowledge in Photoshop so have designed my web site in that program. When I up load my finished web site to my FTP site some of the buttons or images are not aligning properly, or they are squashed or extended.
If you have a look at my home page www.retromodern.com.au and see the SOLD ITEMS tab it looks like the layer has moved and is not in front of the background where as it should be behind like the other tabs.
Also on the Sold Items Page the ITEMS tab (http://www.retromodern.com.au/sold-items.html) is squashed up and can not read it. There is generally something wrong on each page.
I have re saved it in photoshop and changed the layers, flattened it and it still happens.
Here is how i have saved my site:
1. Crete in photoshop and save as a layered PSD
2. Save as a flat PSD
3. Open flat PSD and save for web devices then save as a High JPG
4. Drag into my FTP site
Then when i look at it is all squewiff
Please help and please explain it simply. I am only ver new.
Thanking you in advance !!!! biggrin.gif

Most likely the dimensions of your slices are different for each page and their rollover states are messed up, resulting in a different layout of the underlying table each time. I'd look into that. And of course if you have access to a web authoring tool like Dreamweaver and have some knowledge of HTML, manually plugging everything together there would give a better result...
Mylenium

Similar Messages

Help with website layout

Hi, I need help with Dreamweaver CS4. I don't know HTML which
is why I am using this program. I am using the AP Div (Not the
Insert Div Tag) Icon at the top in the Standard Layout tab accessed
by the icon at the top of the panel in the classic layout mode.
Here is my problem. I am trying to make sure the text and
spacing is the same as much as possible from browser to browser.
The spacing between the lines (leading) is different. Sometimes the
text jumps out of the box or text lines get cut off and looks
jumbled. My pages are layed out with a bunch of AP divs so I can
place them wherever I want. For example I draw one AP div (which
has the square box in at the left top) and then another one below.
Even though they are not touching, the browser displays them
overlapping with the text clashing. Or sometimes text just runs
wild. I've tried to use tables but they are too limiting and I am
not being able to place them freely. Is that because browsers do
not recognize CSS? How do I get at least a decent consistency
between browsers? What am I doing wrong?

As well as the links below - another way to learn (including
anyone else's bad habits) is to find a page you like, and then tell
your web browser to show you the code view for the page and/or do a
"Save As" and save the page to your computer to then copy &
paste code segments into your file (in IE click View at the top,
select Source from the options)
HTML and/or DW Tutorials, and other information links that I
have saved
http://validator.w3.org/
http://www.visibone.com/
http://www.w3schools.com/
http://www.hotscripts.com/
http://www.projectseven.com/
http://www.adobe.com/devnet/
http://www.scriptarchive.com/
http://www.htmldog.com/guides/
http://www.htmlcodetutorial.com/
http://alistapart.com/topics/code
http://www.how-to-build-websites.com/
http://css.maxdesign.com.au/floatutorial/
Download User Guide as PDF for easy search
http://www.adobe.com/support/documentation
http://www.ianr.unl.edu/internet/mailto.html
http://lynda.com/ Hours of videos.
(must pay)
http://apptools.com/examples/pagelayout101.php
http://www.thesitewizard.com/archive/css.shtml
http://www.projectseven.com/tutorials/index.htm
If not PDF (link above) an online guide to read
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/
Customizing the layouts that come with CS3 (VIDEO)
http://www.adobe.com/designcenter/video_workshop/?id=vid0155
FormMail
http://www.bebosoft.com/products/formstogo/index.php
For those using MySQL - Installing PHP and MySQL on Windows
XP
http://www.webassist.com/professional/products/solutionrecipes.asp
Community MX lessons
http://www.communitymx.com/abstract.cfm?cid=3D074
http://www.adobe.com/cfusion/designcenter/search.cfm?product=Dreamweaver&go=Go

Help!!! Can't reinstall Photoshop CS3

Soundbooth beta has caused some conflicts with my Photoshop CS3 (I am assuming that is what is causing my photoshop wierdness) causing me to have to reinstall Photoshop. When I attempted to do so, I got a message to insert Soundbooth CS4. I uninstalled Soundbooth. So I thought. But every time I try to reinstall Photoshop, I am asked to insert Soundbooth CS4.
HELP. I desperately need to reinstall Photoshop and naturally Adobe is closed until Monday.
Note: I am on a Mac 10.5.4, 9 Gg RAM if that helps.

We need more information.
How to get help.

Downloaded Apple Maverick. Now I can't use my old Photoshop CS3. I don't like the new photoshop foremat because I cant see the small ruler measurements. Help, I wish to use the old Photoshop CS3.

Adobe says to contact them...HOW. I'm going all over their site and being moved to other site questions that don't pertain or answer my question,

Did you install photoshop cs3 already?
Or you updated your old mac os with mavericks and photoshop cs3 won't work?
What happens when you try to run it on mavericks?

Problems with editing images from Lightroom to Photoshop CS3

I just installed Lightroom onto my new MacBook Pro and just installed a new version of Photoshop CS3. When I hit the "Edit image in Photoshop CS3" button in Lightroom it won't open Photoshop and therefore won't let me edit the image in CS3. Does anyone know what might be wrong? Any info would be helpful.

I'm running Lightroom and Photoshop CS3. "Edit image in Photoshop CS3" works fine for me. I'm on an iMac and had Lightroom installed first, only thing I noticed is it takes PS a little longer to open up.

Need help in quantizing an image(using adobe photoshop CS3)

Hi All,
I am using window and adobe photoshop CS3 extended. I had an image whereby i had already perform histogram equalization. I would like to quantize the image obtained into 2 bits per pixel, per channel. Can anyone advise me? The image is a 24 bit colour BMP file whereby the bit depth is 24 bits. Pls advise.

Hi, I managed to find the refresh cached option. However there is still one thing which i need some clarification on.
The problem for me is to quantize the image into 2 bits per pixel per channel. I understand from the previous post that i need to use posterize and set it to 4. My questions are as follow.
1) why must the value be 4? if the value is 4 then there should be 8 bits, but my question require a total of 6 bits only
2) After saving my quantized image, the properties of the image still show me the bit depth being 24, thus is there any where whereby i can check that each color pixel is exactly represented by 2 pixels?
Hope you can advise. Tks

Newbie - help with website that i didn't build?

Hi,
My Mother had a website built for her. Things have changed and the site now needs editing. I have gallantly offered to help but am finding it tougher than i thought it would be. I have the FTP login and the host login - although I'm not really sure what the difference is as I can access the files through dreamweaver CS5 with both. Are the host login and the FTP login the same?
I'm using filezilla (or trying to) as the FTP. Now, I think that I have to download all the FTP files onto my computer - but I'm not entirely sure how to do this and then open it up with dreamweaver.
I really need someone to walk me through how to get files from filezilla after I've connected to the host site to open up with dreamweaver and start updating and editing the site.
also I see that the person that originally built the site has used a CSS folder for the 'styles'. He tells me all the colours and everything are in this file. But when I open it up in Dreamweaver I can only see the HTML coding side and not the design side. How do I go about changing colours?
If you can help explain to me that would be great.
Many thanks (in advance)

My Mother had a website built for her. Things have changed and the site
now needs editing. I have gallantly offered to help but am finding it
tougher than i thought it would be. I have the FTP login and the host
login - although I'm not really sure what the difference is as I can
access the files through dreamweaver CS5 with both. Are the host login
and the FTP login the same?
More than likely from your description one logs you into your web based control panel and could potentially login to billing while the other information (FTP) is the one you need for Dreamweaver.
I'm using filezilla (or trying to) as the FTP. Now, I think that I have
to download all the FTP files onto my computer - but I'm not entirely
sure how to do this and then open it up with dreamweaver.
Dreamweaver's FTP should be more than sufficient for you. Just create a new site (Sites->Manage->New) and it will ask for your FTP information along the way. It will also ask for a local folder which could be empty in your case or might not even exist. So point it where you want to work on the site and go from there. If you have questions about FTP information here, you would be best to ask your web hosting provider over user-to-user forums like this because they have the information you need.
Also see: http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
I'm using filezilla (or trying to) as the FTP. Now, I think that I have
to download all the FTP files onto my computer - but I'm not entirely
sure how to do this and then open it up with dreamweaver.
If you follow the instructions for setting up a site in Dreamweaver then you just transfer the files from the Remote to the Local using the Get button and then you can Put the files back on the server in the same place using Dreamweaver.
also I see that the person that originally built the site has used a CSS
folder for the 'styles'. He tells me all the colours and everything are
in this file. But when I open it up in Dreamweaver I can only see the
HTML coding side and not the design side. How do I go about changing
colours?
Your designer is correct. The colors and all styles are defined in a CSS document. You will see the colors defined with their Hex value (could be RGB, but I doubt it), and you will also see bold, underline and other styles defined in this document. Website Design is all about coding. If this does not interest you I recommend finding an outside third party to do the work for you. All the styles are defined in code and that is translated back to the HTML in the form of classes and IDs. Here is a basic tutorial going over CSS: http://www.w3schools.com/CSS/ .

Help with OS 10.6.8 and photoshop CS2

My mac OS systm is OS 10.6.8. My photoshop from CS2 just expired and I can not reinstall without authenicate number. I wanted to purchase photoshop CS5. Can not find a place to buy it. I can not get the latest as my imac is about 6 years old. I can upgrade to 10.7 but that is as far as I can upgrade. I can not afford a new computer at this point. If I upgrade to 10.7, I am trying to purchase a student version of CS4 or 5 that would be compatible with my computer.
Any advice or suggestions is greatly appreciated!
Thanks so much!

This is an Apple forum, and you are asking about an Adobe product. It would be best to pose your question on one of their forums for Mac products.
If you are a registered college student, then you can purchase software at reduced price from your college's software store or bookstore. Otherwise, we can't help you purchase software illegally.

Can anyone help with workflow problem between iPhoto and Photoshop CS4?

I am very new to CS4 Extended, having upgraded from Elements 6 recently. I use iPhoto '08 to do all my photo organization and really enjoy it, have a LOT of work invested in it and don't really want to switch to anything else if I can help it. One aspect I like about it is that it tucks away my original in case I ever need to revert. With Elements, I could set my iPhoto preferences to allow all my editing to be done externally using Elements 6, but it would only allow 4 photos to be sent over to Elements at a time. Then I would have to go back to iPhoto and "get" more. I thought that when I upgraded to CS4, I would at least be allowed four at a time to be sent from iPhoto to Photoshop for editing. Whenever I do this, it sends only one, maybe two, but never four. There doesn't seem to be any rhyme or reason to it. I'm annoyed at having to constantly go back for one or two photos at a time to edit and wondered if anyone knew of a workaround for this problem. The reason I have done it this way all along is that the two programs would work together and update my iPhoto pics and thumbnails automatically. Since then, I have just opened the iPhoto files from within CS4, but the edit doesn't update the thumbnails, only the enlarged versions within iPhoto. Neither Apple nor Adobe has been able to offer any solutions. I am not looking to create multiple copies of my files. I download straight from my camera to iPhoto. I could always just download them to a folder, edit them in CS4 and then import them into iPhoto, but that would necessitate making a copy of the photos to keep the originals safe and I'm not sure I want to have to organize all my originals elsewhere on top of my iPhoto library. I am very open to suggestions!
Thanks!

I appreciate your response. I recently did a reinstall, hoping it might help. It didn't seem to make any difference. Don't know if I need to just switch to a different program like Lightroom or just do all my editing outside of iPhoto and then import the results, but that defeats the purpose of letting iPhoto handle my originals so easily. I really like iPhoto and what it does, and have spent a lot of time getting my library compiled just the way I like with keywords, ratings and so on, and I'm afraid that switching to a new product will lose a lot of that work and either cause me to split my library into two places or to create unnecessary duplicates.

Need help with a filter to use in Photoshop CS5

I am a novice so please be patient. Over the past 15 years or so I have been using a simple filter that I created in Filter Factory to do some analysis on aerial photographs. I am way behind on updates (currently using Photoshop CS (version 8)). I want to upgrade and am using a trial of CS5. After talking with customer support I've found there is no way to use this filter in CS5 and Filter Factory is no longer supported in the Photoshop suite. Can someone help me to create the same filter in Pixel Bender to use in Photoshop CS5? I will share the details of the filter if someone responds.
Thanks!

Is the result a one channel image? The Pixel Bender language currently supports one and two channel images, in addition to three and four channel images, but unfortunately the tools do not. You should be able to fake the one channel output by marking only a single channel of a three or four channel image. In any case, give the filter, below, a try. It may not do exactly what you want but it should get you most of the way there. You'll want to duplicate it and modify the arithmetic to satisfy the second filter algorithm once you've got the filter tuned to fit your needs.
<languageVersion: 1.0;>
kernel RPlusGDivRMinusG
<
    namespace: "pixelbender::forum::support";
       vendor: "aif";
      version: 1;
>
    input image4 src;
    output pixel4 dst;
    void
    evaluatePixel()
        float4 pointsample = sampleNearest(src, outCoord());
        float graychannel = (pointsample.r + pointsample.g) /
                             (pointsample.r - pointsample.g);
        dst = float4(graychannel, 0, 0, pointsample.a);

Newbie Needs Help With Website

I am new to Dreamweaver and am undertaking the task of building my church website. I have placed the images in tables on and centered. I have also set the table width to 60% so that it will display properly in different resolutions. However the links I have created on the left move over the images when the screen size is reduced. My question is what do I need to do with the links to keep them locked in place when the screen size is reduced.
Any help is greatly appreciated. Below is the code that is used for the links
The website that I am working at is: http://www.friedlandmoravian.org
<div id="apDiv2">
<div align="center">
    <p>
      <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','79','height','25','src','text1','quality','high','pluginspage','http://www.adobe.com/s hockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie' ,'text1' ); //end AC code
    </script>
      <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="79" height="25">
          <param name="movie" value="text1.swf" />
          <param name="quality" value="high" />
          <param name="bgcolor" value="#44352A" />
          <embed src="text1.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="79" height="25" bgcolor="#44352A"></embed>
        </object>
      </noscript>
    </p>
    <p>
      <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','113','height','26','src','text2','quality','high','pluginspage','http://www.adobe.com/ shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie ','text2' ); //end AC code
</script>
      <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="113" height="26">
          <param name="movie" value="text2.swf" />
          <param name="quality" value="high" />
          <param name="bgcolor" value="#44352A" />
          <embed src="text2.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="113" height="26" bgcolor="#44352A"></embed>
        </object>
      </noscript>
    </p>
    <p> </p>
    <p>
      <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','106','height','25','src','text3','quality','high','pluginspage','http://www.adobe.com/ shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#44352A','movie ','text3' ); //end AC code
</script>
      <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0" width="106" height="25">
          <param name="movie" value="text3.swf" />
          <param name="quality" value="high" />
          <param name="bgcolor" value="#44352A" />
          <embed src="text3.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="106" height="25" bgcolor="#44352A"></embed>
        </object>
      </noscript>
    </p>
    <p> </p>
</div>
</div>

I can't see any tables being used on the entry page.. all you are using is absolutely positioned divs. Not sure why you are using AP divs, are you?
Unless you understand how these work, you will be in a lot of bother, one of them being the exact problem you mention.... read this article before doing anything else:
http://apptools.com/examples/pagelayout101.php
That layout can be quite easily achieved by a beginner using a table layout - one for header, a nested table layout for the left and right columns and then another for the footer area.
Also a simple css layout would work, but you'd again need to understand css positioning.
The page took a heck of a long time to load and its because all you've used is images.... type your url into the box at this site and you'll see that the image sizes are just too big, causing the slow load times.
http://analyze.websiteoptimization.com/wso
Had a look at one of the inner pages (history) and again you are using an image for the text area - why would you do that...
Firstly, it would cause a speed issue and more importantly would cause you problems if you wanted the page spidered by the search engines... no text on a page and the SEs won't find you.
Sorry to say this, but I'd start over, but before you do, please read up on how to create a page (using either tables or css) that isn't as fragile as the one you have and that will be consistent across different browsers.
Here are some links to help you get started:
http://www.w3schools.com/
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
The last one on the list may suit you to start with, as it takes a FWs comp and shows you how to build the site in Dreamweaver.
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Hope some of this helps :-)

Help with website in Hindi

I am creting a (DW CS5) website in the hindi language. Copy was provided as translated Word docs (in Mangal font) from customer which I have been copying/pasting into my DW pages. I have the encoding set to UTF-8, and the page previews fine/as it should, UNTIL I get it on the server which then shows only black question mark boxes. I have tried testing it on diferent servers, have also tried numerous encoding and charset combinations to no avail. (browser encoding shows UTF-8) I've tried with and without CSS. Other hindi websites view fine.
I am creating the files on an Intel Mac 10.6, test viewing in safari and firefox (boxes with question marks also show in Windows). After countless searches for a solution, I am at my wits end. Most help blogs merely say to encode as UTF-8, which I already have. Can ayone out there PLEASE help and tell me what I am missing/doing wrong? Below is a snippet showing headers and a few lines of sample text...
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="hi">
<head>
<meta http-equiv="Content-Type" content="application/xhtml+xml; charset=UTF-8">
<meta http-equiv="Content-Language" content="hi">
<title>test2</title>
<body>
<p>ड्रॉबार स्प्रिंग सम्भावित अधिक भार स्थितियों में प्रयोग किए जाने के लिए उत्कृष्ट हैं और इनमें ऐसी अंतर्निमित सुरक्षा विशेषता होती है जिसके अंतर्गत टूटने पर स्थिर भार उठाना जारी रहता है। ड्रॉबार स्प्रिंग मे, भार उन लम्बे स्टील लूपों के सिरों पर लगाया जाता है जो स्प्रिंग के मध्य से गुज़रते हैं और विपरीत सिरे में हुक में डाले गए होते हैं, इस प्रकार ये लदान पर स्प्रिंग को संपीडित करते हैं। ड्रॉबार स्प्रिंग के आम अनुप्रयोग का तब प्रयोग किया जाता है जब बरामदे के झूले को सहारा दिया जाता है।</p>
</body>
</html>

G'day Hans-G,
When I copy the text from your online sample page and paste it into DW when in design view, then preview the result in a browser, the characters show as they do on your sample page.
I do have charset="utf-8" and it would seem (something I did not know until someone on this forum pointed this out) that escape characters are not required
This is the resulting code view
<p>चीनी एवं अन्ग्रेज़ी के बाद हिन्दी विश्व में सबसे ज़्यादा बोली जाने वाली भाषा है । भारत और विदेश में ६० करोड़ (६०० मिलियन) से अधिक लोग हिन्दी बोलते, पढ़ते और लिखते हैं । फ़िजी, मॉरिशस, गयाना, सूरीनाम और नेपाल की अधिकतर जनता हिन्दी बोलती है ।</p>
<p>भाषाविद हिन्दी एवं <a href="http://hansgd.de/urdu.htm">उर्दू</a> को एक ही भाषा समझते हैं । हिन्दी <a href="http://hansgd.de/devnagri.htm">देवनागरी</a> लिपि में लिखी जाती है और शब्दावली के स्तर पर अधिकांशत: <a href="http://hansgd.de/sanskrit.htm">संस्कृत</a> के शब्दों का प्रयोग करती है । उर्दू नस्तालिक़ में लिखी जाती है और शब्दावली के स्तर पर उस पर फारसी और अरबी भाषाओं का ज़्यादा असर है । व्याकरणिक रुप से उर्दू और हिन्दी में लगभग शत-प्रतिशत समानता है - सिर्फ़ कुछ खास क्षेत्रों में शब्दावली के स्त्रोत (जैसा कि उपर लिखा गया है) में अंतर होता है। कुछ खास ध्वनियाँ उर्दू में अरबी और फारसी से ली गयी हैं और इसी तरह फारसी और अरबी के कुछ खास व्याकरणिक संरचना भी प्रयोग की जाती है।</p>
Gramps
PS IdRatherBeInAustralia

Help with website

Guys
Am sorry if i posted my following request in the wrong place.
I am doing a website as a part of my project. It is supposed to showcase my dissertation. I was wondering if some one could tell me how to replicate the apple table which displays "store, mac etc etc above".
Can some body post the table format or something !
thx

I think hunter is just interested in how to do an image flip roll-over above an image map.
Here is the nuts and bolts:
http://www.htmlgoodies.com/tutorials/image_maps/article.php/3479771
But unless you are pretty handy with code you would be better off using a web creation tool such as Dreamweaver. With that you get some nifty easy to use tools where mere mortals can succeed in building what you are looking to do.
Hope this helps you.
Best of luck on your presentation.

Help with website for free 30 day trial

I am out of town for a technology conference and have paid for a workshop on Photoshop. I just received an email from the teacher that I must bring a laptop with Photoshop CS6 installed. I was sent the following link....
https://creative.adobe.com/plans I should be able to click on the free download for 30 days trial; but the link does not work.
Watson Chapel School District has purchased liscense for this product. I just have not had this installed on my computer yet. I am the technology coordinator for the district and really need to learn how to use this product.
I am happy to use the free 30 day trial until I get back to get the real deal product installed; but the link does not work.
If you wish, you can take over my computer and help me !!!
Thanks.

What system? What browser? Have you simply tried another browser?
Mylenium

Need major help with websites not loading...

So I have done what I think is everything... some websites just don't load... they tell me... that the server dropped the connection or that it timed out.
So, I've worked with my dsl provider and they even came out with a computer (PC) and the websites seemed to have worked for them. I reloaded the operating system... nothing seems to be working... I even tried to browse with the firewall not on. Help. Please... I need to call Applecare again but this is making me crazy...

Hi there!
I agree with Al Van, you should post a couple of URLs for all to check out. You should also give a few more details, type of browser and type of connection (wireless or ethernet).
Here's a good link to check on your connection speed and quality of connection: http://myspeed.visualware.com/ - this uses Java, if you have difficulty with this link post back.
I surf the web with both a Mac and a PC and have never had problems loading websites on either computer (unless they were offline). I occasionally will run into sites rendering differently on each computer. The problem you described "the server dropped the connection or that it timed out. " is a connection issue or your Mac is taking "too long" to gather info and rendering page...
Post back with more details... Rick
you can try this link: http://alertra.com/spotcheck.php to check if the sites you cannot reach are off line...

Help with website i've built in photoshop CS3

Similar Messages

Maybe you are looking for