Help with wireless setup

i am new to macs and need help choosing the wireless hardware that i will need... if someone could make me a list of exactly what i need i would greatly appreciate it.... i have a black macbook if that makes a difference
macbook   Mac OS X (10.4.8)   windows as well

Any of the major brands out there should work fine - get a wireless router, so it does both jobs at the same time (router + wireless access point). Personally, I DO use Linksys, since I've found them to work great for me at various locations (I support local businesses in town). DLink is the brand I've had issue with.
I take it you've got broadband and the modem the provider gave you. The only thing you should need is the wireless router. The wireless router will allow 2 things: Multiple user capability at your location (wired), and wireless. Ensure you set up security (WEP) as a minimum on the wireless. This prevent others from accessing your network when within range. WEP security isn't bulletproof, but it's a start. I'm sitting here at a business right now, where 4 of the 7 networks in this building are wide open to me. Convenient for me, but an 'oops' on their part. I've used their networks in the past to gain access to the internet, when the provider here was down.
Best of luck!

Similar Messages

  • Need help with Printer Setup conventions

    I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
    There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
    Some printer names appear in bold. What does that mean?
    Thanx.

    Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
    As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
    I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
    Problem: I have a network with 2 computers and the Brother
    multifunction fax/printer. I'm using an Apple airport hub. The printer
    and one computer (Mac tower) are connected to the airport base via
    ethernet. The 2nd computer (Apple laptop) is on the wireless network.
    Until recently i could print from both computers. Now I can't print from
    the tower. But I can still print from the laptop.
    When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
    I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

  • Can you help with wireless usb printing?

    I have a D-Link router ([DI-824VUP) that works fine as far as geting online and printing to an ethernet printer,(HP1300n) wirelessly. I recently bought this router because it has a usb printer port, yet I can not get it to see the usb printer (Canon S830D). D-Link was no help, as they don't support Apple wireless printing, even though they do support wired printing via their router. QUESTION-any idea how to get powerbook to see the printer when connected to the router? Printer setup utility does not see it, only the HP. Thanks-bobbabe
    OS 10.3.9.
    Titanium Powerbook 667.   Mac OS X (10.3.9)   D-Link router(DI-824VUP)

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • Help With My Setup...

    I Hope I'm in the right forum, If not let me know where this post should go.
    Thanks for helping me out. I have some questions regarding my setup and acquiring new gear. Currently, I have a the following setup:
    IMac - newer model
    Logic Pro 9
    Numark tt-usb turntable
    Stanton DJ mixer
    Pair of Yamaha HS80 monitors
    MPD 24
    I would like to add a keyboard controller (I'm thinking of the new Korg Microsampler). Basically, I'm willing to get the microsampler as long as it can Fully function like a controller, which can control logic synths & plug-ins(axiom, mpk, etc.) and as well as it's own features. Furthermore, I would like to to be able to record from my turntable to logic and into the microsampler. I understand I would need an interface. Would I still need the mixer? Would the M-Audio Firewire Solo work with my setup?
    Would a control surface take place of an Interface?
    I am possibly interested in getting a control surface that works good within logic. I was looking at the Euphonix MC Control, it seems to work great with logic. Is there an cheaper alternative? Also, I would like it to be user friendly, I am new to this.
    Essentially, I want everything to work simple & smoothly. I like to make sample based music from records. Can you give me a rundown of the necessary items I'm going to need...cables, interface, etc.
    Sorry, if I'm rambling just want to be clear.
    I appreciate your time....

    I use a Alesis multimix FW and a presonus inspire.
    I would guess that you should always get dry sound from any output with firewire plugged in or not. My inspire uses a software control panel to route signal and the Multimix is all hardware. I have no clue how to route signal with the firebox but it has to be one or the other. Presonus is pretty good with updates and bug fixes did you check for new drivers?

  • Need help with wireless speeds..

    I just got myself a WRT54GS wireless router and i have noticed the speeds being extremely slow. I've gone through all of the threads and didn't get anything that could help.  I have tried what some mention, about changing the beacon interval to 50 and the Frag and RTS to 2304. Also i have changed the wireless channel a couple of times. Still nothing..
    Now onto my connection in general, i have cable and the speeds when direct connected are very fast. I typically download at about 300kb+ and i can get mb download speeds as well.  But while hooked up wirelessly it has been going at about 20kbs. When i try and watch streaming videos and all, it will be break up and all of that..due to the slow speed.  BTW i don't believe there is anything interfering at all. The comp is in the same room as the router as well
    This is my first time dealing with wireless, so any info and help would be greatly appreciated. What are some good ways to get the speeds up?  The comp i have is new as well lol  I know it limits a lot of the help, but this is a pain in the butt. Thanks
    Message Edited by Ichigo on 07-22-2007 10:13 AM
    Message Edited by Ichigo on 07-22-2007 11:58 AM

    Set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    What encryption are you using?  WEP?  WPA?  WPA2?  Some systems work significantly better with one encryption system vs. another.  So try something different.  WEP is no longer recommended.  You should be using WPA or preferably WPA2.  Password (key) should not have any spaces in it.
    Windows XP requires a patch to run WPA2 (= PSK2 = WPA with AES ). Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
    Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
    Hope this helps.
    Message Edited by toomanydonuts on 07-25-2007 05:24 AM

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Help with wireless speed when wired is perfect!

    I have Verizon FiOS internet and a Macbook 13" with OS X 10.6.4. When I am hard wired to my Verizon router, my internet speed is perfect (download/upload tests confirm this). When I am wireless, my internet crawls (and the download test reflects a FAR lower number). I spoke to Verizon and they said that it's not an internet problem because it works perfectly wired and that it's likely an Apple issue that's not allowing the wireless to work properly. My Verizon router IS next to my TV, but even when I moved it and put the computer right next to it, internet speed is incredibly slow. Let me know if you need further info and thanks so much in advance for any help!
    Eric

    Welcome to the discussions!
    When I am wireless, my internet crawls (and the download test reflects a FAR lower number)
    Is is possible for you to take the MacBook down to the coffee place, library or other location with wireless available? If so, you can test to see what type of connection you get.
    If the MacBook connects well and pages load at good speeds...as I suspect they will...you will have confirmation that the MacBook is working fine and the issue is with the wireless on the FIOS router. If that's the case, you need to insist that FIOS techs come to your house so you can check out and test any changes they make before they leave.
    If, on the other hand, you find that the MacBook still performs very slowly, then it's probably time to have the laptop's wireless card or internal antenna checked out for proper operation at the Apple store.

  • Help with Wireless thingy Please!!!

    Hi, could someone please help with this? I am quite computer literate except when it comes to anything wireless or networking as it is something I've never used, so heres the problem - I bought ATV, and put a wireless card in the computer - do i need a seperate router to create a network? ATV searches for a network, and finds one, but I am not sure its mine!! ATV not coming up in itunes. Ive tried everything, but its just not happening. If I need a router, fine I'll get one, but if not could I have some instructions please?!!!! Like what on earth do I put in if adding network to atv manually? How do I know what my network name is? Tried with firewalls disabled, and added ports 3689 and 5353 to exceptions. Bearing in mind I need translations for things like DHCP etc! Its a Belkin Wireless G+ Network Card, compatible with ATV. Please help as this is the only thing standing between me and music heaven!!thankyou!

    On a mac you could create an ad hoc network with a mac with wi-fi card only and internet sharing enabled, I've not done it and I don't know whether one has the choice to name the network or whether it will be identified as the mac's network name. I guess you will need advice from a PC guy as to whether this can be done on a PC, but my guess is that it can.

  • Help with WiFi setup.

    I'm trying to set up my wifi and my sound. I searched the arch wiki and arch linux forums for the past few days and couldn't find a solution.
    When I input #dhcpcd wlan0 I receive
    wlan0: waiting for carrier   
    timed out
    My output for $lspci | grep -i net
    02:00,0 Network Controller: Realtek Semiconductor Co., Ltd. device 8723
    03:00,2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a)
    I had to install the drivers manually with an ethernet connection from http://askubuntu.com/questions/139632/wireless-card-realtek-rtl8723ae-bt-is-not-recognized.  I followed their instructions and managed to install the drivers.
    #netcfg  Brandon
    Brandon [BUSY]
    WPA Authentication/Association Failed [FAIL]
    even though I have an open network.
    When I tried the Arch Wiki manual wireless setup, the timed out message appeared. I tried Mode: Managed and Mode: Ad-Hoc, but was unable to change the Mode into auto with "#iwconfig wlan0 channel auto" for some reason.
    #iwconfig
    eth0 no wireless extensions
    lo no wireless extenstions
    wlan0 IEEE 802.11bgn ESSID off/any Mode: Managed Access Point: Not-Associated Tx-Powe=20 dBm
    Retry long limit:7 RTS thr=2347 B Fragment thr: off
    Encryption key: off
    Power Management: off
    I can associated the wlan0 with #iwconfig wlan0 essid Brandon but it still gives the timed out message when waiting for carrier.
    Last edited by kenshin421 (2012-08-07 03:06:51)

    wlan0 IEEE 802.11bgn ESSID:"Brandon"
    Mode:Managed Frequency:2.452 GHz Access Point: 00:22:6B:54:E8:E8
    Bit Rate=7.2 Mb/s Tx-Power=20 dBm
    Retry long limit:7 RTS thr=2347 B Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=56/70 Signal level=-54 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    That is a successful association ! 
    I still received a timed out message when attempting dhcpcd wlan0.
    With the iwconfig output above ?   It should not do that.
    What happens (when you are associated) with dhcpcd -B -d wlan0   ??  edit As root
    Last edited by ewaller (2012-08-07 05:17:32)

  • Help with router setup

    Hi I need help with my new infinity setup

    seanyg wrote:
    Hi I need help with my new infinity setup
    Surely the openreach engineer did most of it, the rest as said is just plug and play.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • [Solved] help needed with wireless setup (ralink 2860 driver)

    Hi,
    I'm new to Arch so please be gentle ;-)
    I recently upgraded hoping to find improved support for my wireless.  I now find that the kernel recognises and loads the appropriate module:
    [root@akoya ~]# uname -a
    Linux akoya 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686 Pentium(R)
    [root@akoya ~]# lspci | grep Net
    05:00.0 Network controller: RaLink RT2860
    [root@akoya ~]# lsmod | grep 2860
    rt2860sta 514808 1
    I checked over the kernel source and the rt2680sta module is the code from ralink cleaned up for the 2.6.29 kernel.  (I tried building the ralink release but it needs patching for 2.6.29)
    However getting the thing to connect using WPA is another thing altogether
    [root@akoya ~]# ifconfig ra0 up
    [root@akoya ~]# wpa_supplicant -B -Dwext -i ra0 -c /etc/wpa_supplicant.conf
    [root@akoya ~]# dhcpcd ra0
    ra0: dhcpcd 4.0.12 starting
    ra0: waiting for carrier
    ra0: timed out
    I'm not even sure if iwconfig is communicating with this driver (though I can find my router using "iwlist ra0 scan"):
    [root@akoya ~]# iwconfig ra0 essid "sodor"
    [root@akoya ~]# iwconfig
    ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
    Mode:Auto Frequency=2.412 GHz Access Point: 00:21:91:FE:DA:97
    And if I try to configure using wicd I see the following log when trying to connect to the wireless:
    2009/04/17 01:16:43 :: Connecting to wireless network sodor
    2009/04/17 01:16:43 :: Putting interface down
    2009/04/17 01:16:43 :: ifconfig ra0 down
    2009/04/17 01:16:43 :: Releasing DHCP leases...
    2009/04/17 01:16:43 :: Setting false IP...
    2009/04/17 01:16:43 :: ifconfig ra0 0.0.0.0
    2009/04/17 01:16:43 :: ifconfig eth0 0.0.0.0
    2009/04/17 01:16:43 :: Stopping wpa_supplicant and any DHCP clients
    2009/04/17 01:16:43 :: killall wpa_supplicant
    2009/04/17 01:16:43 :: Flushing the routing table...
    2009/04/17 01:16:43 :: route del dev ra0
    2009/04/17 01:16:43 :: route del dev eth0
    2009/04/17 01:16:43 :: Attempting to authenticate...
    2009/04/17 01:16:43 :: ['wpa_supplicant', '-B', '-i', 'ra0', '-c', '/var/lib/wicd/configurations/002191feda97', '-D', 'wext']
    2009/04/17 01:16:43 :: Putting interface up...
    2009/04/17 01:16:43 :: ifconfig ra0 up
    2009/04/17 01:16:43 :: iwconfig ra0 mode Managed
    2009/04/17 01:16:43 :: ['iwconfig', 'ra0', 'essid', 'sodor', 'channel', '1', 'ap', '00:21:91:FE:DA:97']
    2009/04/17 01:16:43 :: WPA_CLI RESULT IS None
    2009/04/17 01:16:43 :: Failed to find status in wpa_cli result
    2009/04/17 01:16:43 :: exiting connection thread
    It is driving me crazy being tied to a cable so I'd really like to get this working... but I'm really not sure what to try.  Do I need to rebuild wpa_supplicant?  If so is there a package-based way of doing that in arch?
    Thanks in advance.
    Last edited by drandre (2009-04-17 19:40:41)

    drandre wrote:
    If so is there a package-based way of doing that
    OK... to answer my own questions ...
    two questions:
    1. Does this mean support for the ralink driver is included by default or *not* included by default?
    It seems it means *not*
    2. If I uncomment this line then makepkg refuses to build the package because the config file's md5 is no longer valid.  How then am I *meant* to make modifications to the build configuration?
    right or wrong I used makepkg -g to generate checksums for my modified config file and pasted these into PKGBUILD.  It then builds happily.  After installing I can run wpa_supplicant with no args and confirm ralink is in the list of drivers.  Excellent.  But still no success.
    Two things I have noticed:
    1. wicd places quotes "" around my pre-shared key.  If I run wpa_supplicant from the command line and use the conf file created by wicd it reports the PSK as being unparsable.  If I remove the quotes then the file is parsed correctly.
    2. It doesn't solve my problem :-(

  • Help with wireless networking with my Photosmart 6525 on Mac 10.8.5

    I have just purchased an HP Photosmart 6525 and cannot get the wireless printing to work. I've followed all of the instructions provided online and printed with the device. 
    I'm attempting to connect from my Macbook Air running 10.8.5. I've successfully connected the printer to my wireless network - I just printed the wireless network test and it states "No problems found. Congratulations...". Gee thanks...
    I've taken the steps of enabling Wireless Direct, and Web Service, ePrint is on. By the way, all of these different options are totally unhelpful - I cannot determine which are actually required to just connect via wi-fi?
    I also downloaded and installed the latest driver software from HP. Going through the setup it reaches a point where it tells me to unplug USB (cannot go through it without it connected I learned) so it can configure wireless. Then it tells me it cannot find the device.
    I have no option to skip this and although I've run it several times I still don't see the "setup assistant" application that it supposedly installed. 
    I've seen elsewhere that there is supposed to be the ability to connect directly to the printer via browser, by typing in the IP address. I've verified that the IP address appears valid for my network (192.168.1....) but when I put it into Chrome it cannot find it. 
    My frustration level is rapidly rising as the documentation and online support for this product is incredibly disjointed and unhelpful. I've searched online for hours, including this forum. Would appreciate any pointers to more detailed help / instruction before I am forced to return this printer.

    Hi,
    Not sure this will ultimately help, but you should update your version from 14.0.0 to 14.1.2. If you can get to the update via Help> Updates... try using the Creative Cloud desktop application found here:
    https://creative.adobe.com/products/creative-cloud
    You may already have it installed; it can be found in the Applications directory for a default install.
    regards,
    steve

  • Help with wireless controller and VLANs

    Hi I'm trying to setup a wireless controller in preparation for a large site go live later this year. I'm struggling to get the controller and the WLAN using the correct VLAN. I want the controller on VLAN 100 and the clients on the WLAN on VLAN 200.                 
    My thought is that I would need a config similar to:
    Switchport for wireless controller management port set to trunk VLAN 100 and 200 with no native VLAN set.
    The management interface on the controller set to VLAN 100.
    A dynamic interface created on VLAN 200.
    When setup like this I can get to the controller on its management address but only from VLAN100 not from another VLAN on site or from other sites over the WAN.
    I have setup a WLAN which is set to use the dynamic interface on VLAN 200.
    I have set the AP to use HREAP and set the native VLAN as 200 and added the dynamic interface into the VLAN mappings
    When I connecting a client to the WLAN I get an address on VLAN 100.
    The switchport for the AP is set to native VLAN 100 and trunk 200 – this setup works for standalone APs at other sites.
    What am I missing?
    Also any idea why the management interface address is not routing? The netmask and gateway are set correctly.
    Thanks
    Paul

    Just to add to Steve's post... You only need to create a dynamic interface for vlan 200 if you have ap's also in local mode.  If your ap's are in H-REAP/FlexConnect mode, you don't need a dynamic interface for vlan 200.
    In you H-REAP/FlexConnect ap, you would set the wlan to vlan mapping there and the switchport configuration would be a trunk allowing vlan 100 (im assuming your native vlan for your ap) and vlan 200.  You should see something like the following:
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Help with phpMyAdmin setup.php script

    Hi all,
    I am a newbie to Arch Linux even though I've been running Linux (-only) for more than a year. I have been mostly running Debian based distributions, so sometimes I feel a bit lost on Arch. So far I have been able to set everything up, from wireless to X server (by just reading the instructions, and some posts in the forum).
    Now I am stuck with something that is not so distro-related, I was following this guide (http://wiki.archlinux.org/index.php/LAMP) but I got stuck at the configuration script for phpMyAdmin.
    In fact, when I go to the address http://localhost/phpMyAdmin/scripts/setup.php I can only see the PHP code, not the web page.
    Now I am sure that Apache is running properly since my php test page runs just fine. So I cannot figure out why the setup.php page does not show correctly.
    Could somebody please give me some hints?
    Any help is greatly appreciated,
    Thanks for your time.

    np .. i forgot one point though , you needed to restart the web server so the php module takes the new settings. this is the case fro all config changes to either teh websierver or a modules/addon

  • Easier way to view phone call logs? Also, help with email setup...

    1.  On my 8220 it's not very efficient to view past call logs and or missed calls.  I have to go into my Messages folder, click the menu button, scroll down to 'view folder' and then scroll down to my 'Phone Call Logs'.  Is there a way to create a folder dedicated to viewing call logs and my missed calls on my home screen without going through all that timely navigating?  Is there a special download for this application?  I've seen this folder on the BB 101 tutorial webpage.
    I'm with Rogers Wireless if that helps.
    2.  When I select the Email Setup it only gives me the the option to "I want to use a work email account with a BlackBey Enterprise Server" and no option for the "I want to create or add an email address" which I see on the BB 101 tutorial webpage.  Well, I'd like to create or add an email address.  How can I get that option on my phone?
    Oh and one more thing, is the 8220 able to run the BB maps application?
    Any help is much appreciated!

    1) While in your messages folder, try pressing ALT + P to bring up the phone logs without all the navigating. (I know that works on other BB models, I don't know on the 8220).
    2) Do you have a BB Data Plan on your carrier account? Once it is , you will get the personal email setup icon.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Macbook Program Issues

    I've had my Macbook for almost two months now and so far it has been great, other than one issue. Lately I've been getting a yellow line running across random program windows and only in the windows, so when I minimize they minimize with the window.

  • Export from FCE to Apple TV

    Hi: I'm trying to export a short movie from Final Cut Express to Apple TV. I tried the Apple TV export option, but the resulting video always comes out squished in 4:3 format rather than 16:9 format like the original. The video was put together using

  • Auto GR for the same material and with different routings to diff stor loc

    Hi All,           I have a semi finished material having 2 different routings line 1 and line 2 and with respective 2 different storage locations but need to have Auto GR.

  • Internet explorer settings for planning web applications

    <p>Hi</p><p>we have two planning applications. i am not able open twoapplications at the same time in two different windows.</p><p>do i need to change any of my internet explorer settings tofacilitate opening two different applications in two windows

  • How to implement auto complete using swings?

    Hi all , i have got a new assignment where I have to implement auto complete. Please suggest me the possible ways to do so. I am working on desktop application. Please help. Thanks Alex