Help with WRT 110

Ok guys first off I'm not the greatest with computers. Here's my deal, I have a WRT 110 and I have Charter high speed internet. I have my desktop hardwired to the router and I have a printer and 2 laptops that are wireless. The printer at the moment is a non-issue because I can't find my installation cd to change the wireless settings but that's another mess. My issue is when I have my desktop and my work laptop connected to the router and I try to add my personal laptop it knocks the internet out. The desktop and work laptop both automatically lose the signal. Any help would be greatly appreciated. 
Solved!
Go to Solution.

On all Windows 7 and Vista computers, disable IPv6 under LAN properties for both the wired and wireless adapters.  Reboot computers and try to connect again.

Similar Messages

  • WRT 110 - New Router not detected

    I am having problems with the setup wizard.  Im getting "New router not detected".  It's all setup correctly.  I've reset modem, router and rebooted 100 times atleast.  I can get on the internet when the modem is conected through the router.  Also, I cant get to the 192.168.1.1 router setup.  I have set up other linksys routers without problems.  We are on Time Warner cable internet.  Please help before I smash this thing.

    I have an older Linksys (twin antenas) product so bought this for my son in Ohio.  He tried to connect the router using his laptop and could not do it...after calling support (Punjab in India) they could not resolve the problem or begin to figure it out.  After watching a 6 year old on YouTube hook up a router, I figured it couldn't be that hard so I told him to send the WRT 110 to me along with his laptop. 
    After trying the install myself (using the supplied CD), I could not connect to the internet via the wired laptop-router-modem either.  So I figured the wireless device of the laptop may be interfering with the router.  So I went to Control Panel>>Network Connections>> and right clicked on "Wireless Connection" and clicked "DISABLE".  After that, the laptop DID connect to the internet via the ethernet cable. 
    When I tried to login to the new wireless network using another laptop, I could not connect after repeated attempts using the letter "O" and the number "0" of the WEP code generated by the CD install.  I finally COPIED and PASTED the WEP code to a Word document, saved to a stick, then transfered the doc to the wireless laptop.  After COPY and PASTE of the WEP code to the LOGIN >>>SUCCESS. 
    The wireless connection works fine two floors away from the router as does my old antenna router did, so the "range" problem reported by others is a mystery to me.  Don't know why the "support" couldn't have solved this problem....I'm not a real computer nerd, but can do "trial and error" fixes. 
    Bottom line: router works fine and is better looking than the "antenna" ones but who cares???  I go for the blinking lights anyway <g>

  • Going to Australia and need help with Power converters

    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  

    godzillafan868 wrote:
    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  
    Check the specs on input voltage/frequency of your power supplies.
    Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all.  These will just need a connector adapter.
    Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
    For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Query help with Model clause

    Hi Gurus,
    Can someone please help me out.
    I've a below tables.
    1) tbl_link --> this table contains information at profile level
    2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
    One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
    ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
    Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
    with
    tbl_SUMMARY as
    select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
    union
    select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
    union
    select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
    union
    select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
    union
    select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
    union
    select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
    union
    select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
    union
    select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
    tbl_link as
    select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
    union
    select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
    union
    select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
    union
    select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
    union
    select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
    union
    select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
    union
    select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
    union
    select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
    union
    select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
    union
    select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
    union
    select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
    union
    select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
    union
    select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
    union
    select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
    union
    select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
    union
    select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
    final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
    as (
    select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
    from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
    ORDER BY PROFILE_ID
    select * from final order by 1;
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED
    1                  1           ONL       53             47               100          0               100
    1                  14          OFL       110            0                176          76              100
    1                  13          OFL       87             0                176          76              100
    1                  12          OFL       26             0                176          76              100
    2                  2           ONL       39             61               100          0               100
    2                  24          OFL       31             0                29           29              100
    2                  23          OFL       29             0                29           29              100
    2                  22          OFL       30             0                29           29              100
    3                  32          OFL       26             0                223          23              200
    3                  33          OFL       87             0                223          23              200
    3                  34          OFL       110            0                223          23              200
    3                  3           ONL       109            0                109          9               100
    4                  42          OFL       26             0                169          69              100
    4                  43          OFL       87             0                169          69              100
    4                  44          OFL       56             0                169          69              100
    4                  4           ONL       109            0                109          9               100
    Need Output as below :
    For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    1                  1           ONL       53             47               100          0               100   -53       0
    1                  12          OFL       26             0                176          76              100   -26       0
    1                  13          OFL       87             0                176          76              100   -74       -13
    1                  14          OFL       110            0                176          76              100   -47       -63
    For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
    Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    2                  2           ONL       39             61               100          0               100   -39       0
    2                  22          OFL       30             0                29           29              100   -30       0
    2                  23          OFL       29             0                29           29              100   0         -29
    2                  24          OFL       31             0                29           29              100   -31       0
    For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
    in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    3                  3           ONL       109            0                109          9               100   -100      -9
    3                  32          OFL       26             0                223          23              200   -26       0
    3                  33          OFL       87             0                223          23              200   -87       0
    3                  34          OFL       110            0                223          23              200   -87       -23
    For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
    in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    4                  4           ONL       109            0                109          9               100   100       9
    4                  42          OFL       26             0                169          69              100   -26       0
    4                  43          OFL       87             0                169          69              100   -18       -69
    4                  44          OFL       56             0                169          69              100   -56       0
    Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
    Appreciate your help!
    Thanks
    Sri

    Hi Gurus,
    Can someone please help me out.
    I've a below tables.
    1) tbl_link --> this table contains information at profile level
    2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
    One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
    ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
    Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
    with
    tbl_SUMMARY as
    select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
    union
    select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
    union
    select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
    union
    select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
    union
    select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
    union
    select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
    union
    select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
    union
    select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
    tbl_link as
    select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
    union
    select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
    union
    select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
    union
    select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
    union
    select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
    union
    select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
    union
    select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
    union
    select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
    union
    select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
    union
    select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
    union
    select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
    union
    select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
    union
    select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
    union
    select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
    union
    select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
    union
    select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
    final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
    as (
    select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
    from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
    ORDER BY PROFILE_ID
    select * from final order by 1;
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED
    1                  1           ONL       53             47               100          0               100
    1                  14          OFL       110            0                176          76              100
    1                  13          OFL       87             0                176          76              100
    1                  12          OFL       26             0                176          76              100
    2                  2           ONL       39             61               100          0               100
    2                  24          OFL       31             0                29           29              100
    2                  23          OFL       29             0                29           29              100
    2                  22          OFL       30             0                29           29              100
    3                  32          OFL       26             0                223          23              200
    3                  33          OFL       87             0                223          23              200
    3                  34          OFL       110            0                223          23              200
    3                  3           ONL       109            0                109          9               100
    4                  42          OFL       26             0                169          69              100
    4                  43          OFL       87             0                169          69              100
    4                  44          OFL       56             0                169          69              100
    4                  4           ONL       109            0                109          9               100
    Need Output as below :
    For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    1                  1           ONL       53             47               100          0               100   -53       0
    1                  12          OFL       26             0                176          76              100   -26       0
    1                  13          OFL       87             0                176          76              100   -74       -13
    1                  14          OFL       110            0                176          76              100   -47       -63
    For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
    Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    2                  2           ONL       39             61               100          0               100   -39       0
    2                  22          OFL       30             0                29           29              100   -30       0
    2                  23          OFL       29             0                29           29              100   0         -29
    2                  24          OFL       31             0                29           29              100   -31       0
    For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
    in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    3                  3           ONL       109            0                109          9               100   -100      -9
    3                  32          OFL       26             0                223          23              200   -26       0
    3                  33          OFL       87             0                223          23              200   -87       0
    3                  34          OFL       110            0                223          23              200   -87       -23
    For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
                                Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
    in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
    PARENT_PROFILE_ID  PROFILE_ID  CATGCODE  EARNED_POINTS  BORROWED_POINTS  CERT_POINTS  DISCARD_POINTS  USED  BURN_PTS  EXPIRE_PTS
    4                  4           ONL       109            0                109          9               100   100       9
    4                  42          OFL       26             0                169          69              100   -26       0
    4                  43          OFL       87             0                169          69              100   -18       -69
    4                  44          OFL       56             0                169          69              100   -56       0
    Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
    Appreciate your help!
    Thanks
    Sri

  • Need help with color management

    I am looking for someone to help me.  Please!
    I am looking for help with Photoshop/printer not printing correct colors.
    I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
    Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect.  I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
    I will be working a lot with cardstock or cover stock 65-110 lbs paper.  I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one.  I have tried matching the settings of that printer to mine to no avail.  I have finally gotten the color close, but not quite.  When I print on my Canon injet the colors match and print perfectly.
    I have tried every setting variation that I can think of to get the color correct with my new OKIdata.  I have to get the colors correct or my new business will go under because I can't match colors for my customers.  I am a self taught Photoshoper and a novice so please bear with me.
    Using Okidata PCL.  Also have PS
    Color settings in Photoshop:
    North America General Purpose 2
    sRGB 2.1
    U.S. Web Coated Swop v2
    Dot gain 20 %
    Dot gain 20 %
    Preserve embeded profile
    Preserve embeded profile
    Preserve embeded profile
    engine: Adobe (ACE)
    Relative Colormetric
    Tried RGB color mode and CMYK color mode, no difference
    Printer settings:
    Photoshop manages colors
    sRGB 2.1 Printer profile
    Relative Colormetric
    Print setup:
    Letter
    Multipurpose tray
    Weight: printer settings-default  (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
    Job Options:
    Hight Quality
    Color: No color matching
    Printer preferences in Printer properties:
    Color management
    Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
    ICC Profiles: Generic PnP Monitor (default)
    Advanced:
    Windows Color System Defaults:
    everything under this tab is set at System Default
    I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help.  I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
    Tried printing in PSE and it gave me an error that it was not a post script printer.  Installed ps driver, still getting errors and it wouldn't print.
    I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k  LOL
    Thanks!  JS

    You need an ICC profile for your printer.  Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you.  You download some software they provide, then print a test file on the exact same paper you are using for your cards.  Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file.  Once you have it, you'll be able to print accurate colors.
    There are other services out there that may cost less, but I do not know how reputable they are.  Chromix is a good business I've worked with many times.
    If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble.  Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

  • Need help with overlapping divs!

    Hey everyone,
    I'm working on another website and I have come up against a common problem for newbie designers from what I hear, the dreaded overlapping div problem!  I have a 2 column fixed layout with a floating left div.  My left div has my nav bar and various images.  When my main content div has more content than the left floating div, the left div border does not reach the footer!  Until now, I have gotten by with just hitting return in my left column div until it reaches the footer.  I am sure it is not the right way to do it but it has worked so far.  The problem is, now one of the pages has the left column div overlapping onto the footer!  I did some reading and I am guessing it involves either the box properties or clear float which I am not too familiar with.
    Any advice would be stellar!  I know this is just another stumbling block to get over but I would feel so much better if I was doing it the right way. 
    Here are screens of my issue,
    And here is my code for the page in question.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <link rel="shortcut icon" href="http://www.xldesignsonline.com/fchi/favicon.ico">
    <title>Full Circle Home Inspections</title>
    <link href="_css/main.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
    <style type="text/css">
    /* place css box model fixes for IE 5* in this conditional comment */
    .twoColFixLtHdr #sidebar1 { width: 230px; }
    </style>
    <![endif]--><!--[if IE]>
    <style type="text/css">
    /* place css fixes for all versions of IE in this conditional comment */
    .twoColFixLtHdr #sidebar1 { padding-top: 30px; }
    .twoColFixLtHdr #mainContent { zoom: 1; }
    /* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
    </style>
    <![endif]-->
    <style type="text/css">
    <!--
    body {
         background-color: #FFF;
    .paragraphLead {
         font-size: 110%;
         font-weight: bold;
    a:link {
         text-decoration: none;
         color: #CF0;
    a:visited {
         text-decoration: none;
    a:hover {
         text-decoration: none;
    a:active {
         text-decoration: none;
    #apDiv1 {
         position:absolute;
         width:236px;
         height:157px;
         z-index:1;
         left: 692px;
         top: 372px;
    #apDiv2 {
         position:absolute;
         width:200px;
         height:192px;
         z-index:2;
         left: 697px;
         top: 1443px;
    #apDiv3 {
         position:absolute;
         width:158px;
         height:204px;
         z-index:2;
         left: 643px;
         top: 1502px;
    -->
    </style>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    </head>
    <body class="twoColFixLtHdr">
    <div id="container">
      <div id="header">
        <h1><!-- end #header -->
      </h1></div>
      <div id="sidebar1">
        <h3 align="center">
          <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="620">
            <param name="movie" value="_assets/menu.swf" />
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="swfversion" value="6.0.65.0" />
            <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
            <param name="expressinstall" value="Scripts/expressInstall.swf" />
            <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
            <!--[if !IE]>-->
            <object type="application/x-shockwave-flash" data="_assets/menu.swf" width="200" height="620">
              <!--<![endif]-->
              <param name="quality" value="high" />
              <param name="wmode" value="opaque" />
              <param name="swfversion" value="6.0.65.0" />
              <param name="expressinstall" value="Scripts/expressInstall.swf" />
              <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
              <div>
                <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
              </div>
              <!--[if !IE]>-->
            </object>
            <!--<![endif]-->
          </object>
        </h3>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/"><img src="_images/interNACHI.png" alt="InterNACHI" width="190" height="164" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/education.htm"><img src="_images/education-seal-small.gif" alt="education seal" width="150" height="150" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.iac2.org/"><img src="_images/iac2-all.gif" width="174" height="126" alt="IAC" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.inspectopia.com/profile.b.507.r.16181.u.03bcfb.html"><img src="_images/logo_top.png" alt="Inspectopedia" width="190" height="45" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.energystar.gov/"><img src="_images/img_energy_star_partner.jpg" width="160" height="191" alt="Energy Star Partner" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://cjenterprises.myshaklee.com/us/en/welcome.html#"><img src="_images/Shaklee.gif" alt="Shaklee" width="119" height="160" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://activerain.com/"><img src="_images/ARLogoSmall.gif" alt="Active Rain" width="135" height="36" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.insiderpages.com/b/15246780294"><img src="_images/insider_pages.gif" alt="Insider Pages" width="89" height="37" border="0" /></a></p>
    <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
      </div>
      <div id="mainContent">
        <h2>Radon Gas Inspection</h2>
        <div id="paragraphFloat">
          <h5>What Is Radon?</h5>
          <p> Radon is a cancer causing radioactive gas. You cannot see, smell or taste radon, but it may be a problem in your home. The Surgeon General has warned that radon is the second leading cause of lung cancer in the United States today. </p>
          <div id="apDiv1">
        <div align="center"><a href="http://www.epa.gov/radon/video/epa-epu.wmv"><img src="_images/psa_revised.jpg" alt="What Is Radon?" width="200" height="172" border="0" /></a></div></div></div>
        <p>If you smoke and your home has high radon levels, you're at high risk for developing lung cancer. Some scientific studies of radon exposure indicate that children may be more sensitive to radon. This may be due to their higher respiration rate and their rapidly dividing cells, which may be more vulnerable to radiation damage. </p>
    <p> </p>
        <h5>Why Is It Dangerous?</h5>
    <p> The U.S. Environmental Protection Agency (US EPA) and the Surgeon General's Office have estimated that as many as 20,000 lung cancer deaths are caused each year by radon. Radon is the second leading cause of lung cancer. Radon-induced lung cancer costs the United States over $2 billion dollars per year in both direct and indirect health care costs.</p>
    <p>According to the US EPA, nearly 1 in 3 homes checked in seven states and on three Indian lands had screening levels over 4 pCi/L, the EPA's recommended action level for radon exposure.</p>
    <p>The alpha radiation emitted by radon is the same alpha radiation emitted by other alpha generating radiation sources such as plutonium.</p>
    <p>A family whose home has radon levels of 4 pCi/l is exposed to approximately 35 times as much radiation as the Nuclear Regulatory Commission would allow if that family was standing next to the fence of a radioactive waste site. (25 mrem limit, 800 mrem exposure)</p>
    <p> At the 4 pCi/l EPA action guideline level, radon carries approximately 1000 times the risk of death as any other EPA carcinogen. It is important to note that the action level is not a safe level, as there are no &quot;safe&quot; levels of radon gas.</p>
    <p> </p>
    <h5>How Does It Get Into My Home?</h5>
    <p> Radon is a radioactive gas. It comes from the natural decay of uranium that is found in nearly all soils. It typically moves up through the ground to the air above and into your home through cracks and other holes in the foundation. Your home traps radon inside, where it can build up. Any home may have a radon problem. This means new and old homes, well-sealed and drafty homes, and homes with or without basements.</p>
    <p> Radon from soil gas is the main cause of radon problems. Sometimes radon enters the home through well water. In a small number of homes, the building materials can give off radon, too. However, building materials rarely cause radon problems by themselves.</p>
    <p><strong>Radon gets in through:</strong></p>
    <ul>
      <li>Cracks in solid floors
        <div id="apDiv3">
          <div align="center"><a href="http://www.fullcirclehomeinspections.com/_assets/CitizensGuideRadon.pdf"><img src="_images/citguidecoverradon.jpg" alt="Guide To Radon" width="154" height="200" border="0" /></a></div>
        </div>
      </li>
      <li>Construction joints</li>
      <li>Cracks in walls</li>
      <li>Gaps in suspended floors</li>
      <li>Gaps around service pipes</li>
      <li>Cavities inside walls</li>
      <li>Surrounding water supply</li>
    </ul>
    <p> </p>
    <h5>What Can I Do?</h5>
    <p> Radon is a national environmental health problem. Elevated radon levels have been discovered in every state. The US EPA estimates that as many as 8 million homes throughout the country have elevated levels of radon. Current state surveys show that 1 home in 5 has elevated radon levels.</p>
    <p> Testing is the only way to know your home's radon levels. There are no immediate symptoms that will alert you to the presence of radon. It typically takes years of exposure before any problems surface. </p>
    <p>Let <strong>Full Circle Home Inspections</strong> ensure your family and your home are protected and safe from radon exposure!</p>
    <p> </p>
    <h5>Radon Myths</h5>
    <p><strong><em>MYTH:</em> Scientists are not sure that radon really is a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although some scientists dispute the precise number of deaths due to radon, all the major health organizations (like the Centers for Disease Control and Prevention, the American Lung Association and the American Medical Association) agree with estimates that radon causes thousands of preventable lung cancer deaths every year. This is especially true among smokers, since the risk to smokers is much greater than to non-smokers.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon testing is difficult, time-consuming and expensive.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Radon testing is easy. You can test your home yourself or hire a qualified radon test company. Either approach takes only a small amount of time and effort.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Homes with radon problems can't be fixed.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> There are simple solutions to radon problems in homes. Hundreds of thousands of homeowners have already fixed radon problems in their homes. Most homes can be fixed for about the same cost as other common home repairs; check with one or more qualified mitigators. Call your <a href="http://www.epa.gov/radon/whereyoulive.html">state radon office</a> for help in identifying qualified mitigation contractors.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon affects only certain kinds of homes.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>House construction can affect radon levels. However, radon can be a problem in homes of all types: old homes, new homes, drafty homes, insulated homes, homes with basements, and homes without basements. Local geology, construction materials, and how the home was built are among the factors that can affect radon levels in homes.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon is only a problem in certain parts of the country.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> High radon levels have been found in every state. Radon problems do vary from area to area, but the only way to know your radon level is to test.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> A neighbor's test result is a good indication of whether your home has a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> It's not. Radon levels can vary greatly from home to home. The only way to know if your home has a radon problem is to test it.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Everyone should test their water for radon.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although radon gets into some homes through water, it is important to first test the air in the home for radon. If your water comes from a public water supply that uses ground water, call your water supplier. If high radon levels are found and the home has a private well, call the Safe Drinking Water Hotline at 1-800-426-4791 for information on testing your water.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> It's difficult to sell homes where radon problems have been discovered.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Where radon problems have been fixed, home sales have not been blocked or frustrated. The added protection is some times a good selling point.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> I've lived in my home for so long, it doesn't make sense to take action now.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>You will reduce your risk of lung cancer when you reduce radon levels, even if you've lived with a radon problem for a long time.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Short-term tests can't be used for making a decision about whether to fix your home.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em> </strong>A short-term test, followed by a second short-term test* can be used to decide whether to fix your home. However, the closer the average of your two short-term tests is to 4 pCi/L, the less certain you can be about whether your year-round average is above or below that level. Keep in mind that radon levels below 4 pCi/L still pose some risk. Radon levels can be reduced in most homes to 2 pCi/L or below.</p>
      <p> </p>
      <p> </p>
      <p> </p>
      <p align="center"><img src="_images/CA-3.jpg" width="520" height="207" /></p>
    </blockquote>
      </div>
      <div id="footer">
        <p align="center"><strong>© 2009 XL Designs Online - All Rights Reserved </strong></p>
      </div>
    <!-- end #container --></div>
    <script type="text/javascript">
    <!--
    swfobject.registerObject("FlashID");
    //-->
    </script>
    </body>
    </html>
    And here is my CSS if needed,
    @charset "utf-8";
    body  {
         font: 100% Verdana, Arial, Helvetica, sans-serif;
         background: #666666;
         margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
         padding: 0;
         text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
         color: #000000;
    .twoColFixLtHdr #container {
         width: 950px; /* the auto margins (in conjunction with a width) center the page */
         border: 1px solid #000000;
         text-align: left; /* this overrides the text-align: center on the body element. */
         margin-top: 20px;
         margin-right: auto;
         margin-bottom: 20px;
         margin-left: auto;
         background-color: #557050;
    .twoColFixLtHdr #header {
         border-bottom: 1px solid #000000;
         height: 250px;
         background-color: #DDDDDD;
         padding-top: 0;
         padding-right: 10px;
         padding-bottom: 0;
         padding-left: 20px;
         background-image: url(../_images/homebanner1.png);
    .twoColFixLtHdr #header h1 {
         margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
         padding: 20px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
         text-align: center;
         font-size: 48px;
         font-family: Tahoma, Geneva, sans-serif;
         color: #000;
    .twoColFixLtHdr #sidebar1 {
         float: left; /* since this element is floated, a width must be given */
         width: 200px;
         border-right: 1px solid #000000;
         background-color: #557050;
         padding-top: 0px;
         padding-right: 10px;
         padding-bottom: 15px;
         padding-left: 10px;
    .twoColFixLtHdr #mainContent {
         margin-top: 0;
         margin-right: 0;
         margin-bottom: 0;
         margin-left: 250px;
         padding-top: 0;
         padding-right: 20px;
         padding-bottom: 0;
         padding-left: 20px;
         text-align: left;
    .twoColFixLtHdr #mainContent h1 {
         font-size: 48px;
         font-family: "Arial Rounded MT Bold";
         font-weight: bold;
    .twoColFixLtHdr #mainContent h2 {
         font-family: "Arial Rounded MT Bold";
         font-size: 32px;
    .twoColFixLtHdr #mainContent h3 {
         font-family: Georgia, "Times New Roman", Times, serif;
         font-style: italic;
         color: #CF0;
         font-size: 125%;
    .twoColFixLtHdr #mainContent h5 {
         font-size: 120%;
    .twoColFixLtHdr #footer {
         padding: 20px 10px 20px 20px;
         border-top: 1px solid #000000;
         background-color: #A3A3A3;
         font-family: Arial, Helvetica, sans-serif;
    .twoColFixLtHdr #footer p {
         margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
         padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    .fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
         float: right;
         margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page */
         float: left;
         margin-right: 8px;
    .clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
         clear:both;
        height:0;
        font-size: 1px;
        line-height: 0px;
    #paragraphFloat {
         width: 350px;
    #paragraphFloat2 {
         width: 350px;
    Please if anyone knows what I'm doing wrong please please let me know!  Since I am learning, I really want to get main concepts like this down so I am not constantly doing things the hard way!  Thank you! 
    Jayson

    1) Regarding validation, what does it do?
    It validates by telling you where your code isn't er... valid.  Sometimes the results are a bit jumbled but if you work through them one at a time and revalidate, it's a good way to learn.  If you fix all of the errors shown up through the validator you should end up with standards compliant code.  Not necessarily the best, most efficient code you can write but at least it will be valid and it helps you spot errors that hours of code-staring never seems to find.
    I don't use the DW validation tool because I find the W3c one easier.
    The W3c validator has a check box of HTML Tidy which can tidy up your code but it's not always as easy to see what changes.
    2) I know the <p> tag for spacing is wrong, I could just feel it in my bones.  I just didn't know what else to do.  If I <br> all the way down won't the code be just as cluttered?
    You're obviously a born web coder!
    <br> will bloat your page if you use them to position elements.
    Here you need to get used to a) the Block Model and b) CSS positioning.  Once you crack these, CSS opens up for you and becomes a little more intuitive.
    if you have two elements on top of each other rather than push them apart with other elements you do it with padding and/or margin.  There are things to watch out for here namely, collapsing margins but if you start to read up on the above, you'll get it.
    I just thought of something.  If I add a div in main content, align it to the bottom center with CSS, use a line break between it and the text above, and add the image in question in the new div, will the spacing between the text and image work itself out?  I just really want to get out of the <p> bad habit.
    Keep thinking!  Web design is not like desktop publishing or print.  Elements on a HTML page don't behave like paragraphs on a page.  Once you begin to figure out why not it all gets a little easier.
    If you want an image at the bottom an element you put that at the end of the content in that element.  Then you need to ensure there is no margin, padding or border between the img element and the next element (your footer).  HTML elements come with some styling that is applied by default in the browser.  Many web developers include a rule like this:
    body {
    margin: 0;
    padding:0;
    This sets the margin and padding to zero of course and it's purpose is to override the defaults.  Some people advocate applying similar rules to all elements and if your interested try googling Eric Meyer who has written about it online.
    One of the key purposes of CSS is to take styling out of the page.  It's leaner, more efficient for the viewer and the coder and helps with site management.
    3) AP divs are weird, and I did only use as a last resort.
    See? You're a natural!
    The reason is I am confused by the float and clear float classes.  My left column is floated left and that element is what I was having problems understanding.  I tried to make new divs and float right but I screwed it all up.  I am sure I am just not applying the clear float in the right places.
    Getting the hang of floating is key to CSS positioning.  You use a float if you want two elements to sit side by side on the page.  It disrupts the "document flow."  Ordinarily HTML elements are rendered one after the other, on top of each other.  Floating an element takes it out of the document flow and allows other elements to occupy its space.  When you float an element it should always have a width.  If the element below it also has a width, that width has to be sufficiently narrow to allow it to occupy the space.  In short, floated elements can't be wider than their containing element.
    The clear property is used after a float to stop an element occupying the space left by a floated element.  It works but confuses the heck out of me!
    So that leads me to my final point.  I am a novice too!  I might have fluffed a few of the technical points above but it's pretty much there.
    Regards
    Martin

  • Help With Kernel Panic in Mid 2012 13" Macbook Pro

    I have a 13" Mid-2012 Macbook Pro.
    2.5 GHz Intel Core i5 / 8GB Memory
    OS X 10.9.5
    Recently I have been getting kernel panics / grey screens of death.  From the Console logs, it appears I have had four kernel panics since September 22.
    I am not aware of any particular thing I can do to produce the error.
    Some things I've tried:
    Disk Utility (this generally returns no errors.  However, once it asked me to boot to recovery mode to run Disk Utility there)
    Disk Utility in recovery mode (No errors)
    single user mode fsck -fy (No errors)
    Apple Hardware Test, extended mode (No errors)
    Observed Console logs for kernel panics (I am not sure how to parse these)
    Other details about the setup/environment:
    No peripherals
    I did see one update About the OS X Mavericks v10.9.5 Update that I had not installed until tonight.  Since September 22, I have installed 3 such updates.
    No anti-virus
    Hard drive is mostly empty
    File Vault is on
    I hope this is not poor form but I thought I would post some snippets from my kernel panic logs here to help with assessment.    I removed some information that looked like it might include personal identifiers and also the "loaded kexts" portions because of their length.   If those are helpful I could post them. 
    Any help diagnosing this problem would be appreciated.
    Mon Sep 22 10:56:45 2014
    panic(cpu 0 caller 0xffffff80064a3cf7): "VM_PAGE_QUEUES_REMOVE: unmarked page on Q"@/SourceCache/xnu/xnu-2422.110.17/osfmk/vm/vm_resident.c:3007
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81108c3990 : 0xffffff8006422f79
    0xffffff81108c3a10 : 0xffffff80064a3cf7
    0xffffff81108c3a70 : 0xffffff80064a5c52
    0xffffff81108c3a90 : 0xffffff80064a7527
    0xffffff81108c3ae0 : 0xffffff800649d8da
    0xffffff81108c3e00 : 0xffffff800649eca5
    0xffffff81108c3e20 : 0xffffff80068bc731
    0xffffff81108c3e60 : 0xffffff7f87d8acc2
    0xffffff81108c3e80 : 0xffffff7f87db1e8c
    0xffffff81108c3ed0 : 0xffffff7f87daf8e7
    0xffffff81108c3ef0 : 0xffffff80068b07f0
    0xffffff81108c3f30 : 0xffffff80068af292
    0xffffff81108c3f80 : 0xffffff80068af367
    0xffffff81108c3fb0 : 0xffffff80064d7417
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAcceleratorFamily2(98.22)[0EC64777-94B9-32E3-AC03-A2367895744 B]@0xffffff7f87d89000->0xffffff7f87dedfff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f86abe000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8731f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    >>>>>>>
    System uptime in nanoseconds: 27450106852892
    last loaded kext at 25016211949613: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f882de000, size 49152)
    last unloaded kext at 25123578772021: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f882de000, size 32768)
    Fri Sep 26 13:48:09 2014
    panic(cpu 0 caller 0xffffff80032dc24e): Kernel trap at 0xffffff80032a87e3, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000109e19000, CR3: 0x000000000578e000, CR4: 0x00000000001606e0
    RAX: 0x0000000000000040, RBX: 0x001e3de600010000, RCX: 0xffffff80038d0320, RDX: 0xffffff80038d01c0
    RSP: 0xffffff810d5fbc70, RBP: 0xffffff810d5fbd80, RSI: 0xffffff8008adc0b0, RDI: 0xffffff80038d01c0
    R8:  0x0000000000000000, R9:  0x0000000000000010, R10: 0x0000000000000001, R11: 0xffffff800322fe40
    R12: 0xffffff80038d0570, R13: 0x00000000001ae747, R14: 0x0000000000000001, R15: 0x0000000000000025
    RFL: 0x0000000000010206, RIP: 0xffffff80032a87e3, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000109e19000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80e5307c50 : 0xffffff8003222f79
    0xffffff80e5307cd0 : 0xffffff80032dc24e
    0xffffff80e5307ea0 : 0xffffff80032f3746
    0xffffff80e5307ec0 : 0xffffff80032a87e3
    0xffffff810d5fbd80 : 0xffffff8003681300
    0xffffff810d5fbef0 : 0xffffff80036e1f6f
    0xffffff810d5fbf00 : 0xffffff800369b8cc
    0xffffff810d5fbf20 : 0xffffff800324a20a
    0xffffff810d5fbfb0 : 0xffffff80032d7417
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    >>>>>>>
    System uptime in nanoseconds: 12133027063361
    last loaded kext at 12126462633739: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8514b000, size 49152)
    last unloaded kext at 11457958413580: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8514b000, size 32768)
    Wed Oct  1 12:10:05 2014
    panic(cpu 2 caller 0xffffff802b8dc24e): Kernel trap at 0xffffff802b8a42c0, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x000000000f0ab000, CR3: 0x000000022136b08e, CR4: 0x00000000001606e0
    RAX: 0xffffff802bed0320, RBX: 0x0000000000000025, RCX: 0x0000000000000025, RDX: 0x001778a600020000
    RSP: 0xffffff813719bd00, RBP: 0xffffff813719bd20, RSI: 0xffffff8032ed3df0, RDI: 0xffffff802bed0570
    R8:  0xffffff8033110728, R9:  0xffffff8032faed40, R10: 0x0000000000000000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff8050405f80, R14: 0x0000000000000069, R15: 0xffffff8032faed40
    RFL: 0x0000000000210282, RIP: 0xffffff802b8a42c0, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x000000000f0ab000, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff812d90ddf0 : 0xffffff802b822f79
    0xffffff812d90de70 : 0xffffff802b8dc24e
    0xffffff812d90e040 : 0xffffff802b8f3746
    0xffffff812d90e060 : 0xffffff802b8a42c0
    0xffffff813719bd20 : 0xffffff802b8a4f65
    0xffffff813719bd50 : 0xffffff802b879033
    0xffffff813719bf20 : 0xffffff802b8dc68c
    0xffffff813719bfb0 : 0xffffff802b8f364b
    BSD process name corresponding to current thread: Google Chrome He
    Mac OS version:
    13E28
    >>>>>>
    System uptime in nanoseconds: 13240283519708
    last loaded kext at 12513142203574: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fad74b000, size 49152)
    last unloaded kext at 12584738581143: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fad74b000, size 32768)
    Fri Oct 10 22:39:52 2014
    panic(cpu 3 caller 0xffffff8020cdc24e): Kernel trap at 0xffffff8020ca42c0, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000035c56000, CR3: 0x00000000858c80b8, CR4: 0x00000000001606e0
    RAX: 0xffffff80212d0320, RBX: 0x0000000000000025, RCX: 0x0000000000000025, RDX: 0x00251d6600020000
    RSP: 0xffffff8141f63d00, RBP: 0xffffff8141f63d20, RSI: 0xffffff802c33f3f0, RDI: 0xffffff80212d0570
    R8:  0xffffff8028b38928, R9:  0xffffff802c3d2ad8, R10: 0x0000000035c9b000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff804dd51260, R14: 0x0000000000000084, R15: 0xffffff802c3d2ad8
    RFL: 0x0000000000010282, RIP: 0xffffff8020ca42c0, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000035c56000, Error code: 0x0000000000000000, Fault CPU: 0x3
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8122ec5df0 : 0xffffff8020c22f79
    0xffffff8122ec5e70 : 0xffffff8020cdc24e
    0xffffff8122ec6040 : 0xffffff8020cf3746
    0xffffff8122ec6060 : 0xffffff8020ca42c0
    0xffffff8141f63d20 : 0xffffff8020ca4f65
    0xffffff8141f63d50 : 0xffffff8020c79033
    0xffffff8141f63f20 : 0xffffff8020cdc68c
    0xffffff8141f63fb0 : 0xffffff8020cf364b
    BSD process name corresponding to current thread: Google Chrome He
    Mac OS version:
    13E28
    >>>>
    System uptime in nanoseconds: 88915375202175
    last loaded kext at 88230087275581: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fa2b97000, size 49152)
    last unloaded kext at 88295369975570: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fa2b97000, size 32768)

    Thank you.  below I have included the full panic logs, including kernel extensions. 
    I did run and pass a memory test last night, but thank you for noting that this may not be conclusive.
    Do you see anything else notable in the logs, that would suggest anything other than a memory problem?  What would be the best way to test it?  Last night I used Rember .  Assuming that you don't identify anything else, would the next step be simply memory replacement?
    Logs below.
    Thanks!
    ==========================
    Anonymous UUID:       XXXXX
    Mon Sep 22 10:56:45 2014
    panic(cpu 0 caller 0xffffff80064a3cf7): "VM_PAGE_QUEUES_REMOVE: unmarked page on Q"@/SourceCache/xnu/xnu-2422.110.17/osfmk/vm/vm_resident.c:3007
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81108c3990 : 0xffffff8006422f79
    0xffffff81108c3a10 : 0xffffff80064a3cf7
    0xffffff81108c3a70 : 0xffffff80064a5c52
    0xffffff81108c3a90 : 0xffffff80064a7527
    0xffffff81108c3ae0 : 0xffffff800649d8da
    0xffffff81108c3e00 : 0xffffff800649eca5
    0xffffff81108c3e20 : 0xffffff80068bc731
    0xffffff81108c3e60 : 0xffffff7f87d8acc2
    0xffffff81108c3e80 : 0xffffff7f87db1e8c
    0xffffff81108c3ed0 : 0xffffff7f87daf8e7
    0xffffff81108c3ef0 : 0xffffff80068b07f0
    0xffffff81108c3f30 : 0xffffff80068af292
    0xffffff81108c3f80 : 0xffffff80068af367
    0xffffff81108c3fb0 : 0xffffff80064d7417
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAcceleratorFamily2(98.22)[0EC64777-94B9-32E3-AC03-A2367895744 B]@0xffffff7f87d89000->0xffffff7f87dedfff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f86abe000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f8731f000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: XXXXX
    Kernel slide:     0x0000000006200000
    Kernel text base: 0xffffff8006400000
    System model name: MacBookPro9,2 (Mac-XXXXX)
    System uptime in nanoseconds: 27450106852892
    last loaded kext at 25016211949613: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f882de000, size 49152)
    last unloaded kext at 25123578772021: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f882de000, size 32768)
    loaded kexts:
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleIntelHD4000Graphics 8.2.8
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.AppleIntelFramebufferCapri 8.2.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOAcceleratorFamily2 98.22
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.driver.CoreStorage 380
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    ================================================
    Anonymous UUID:       XXXXX
    Fri Sep 26 13:48:09 2014
    panic(cpu 0 caller 0xffffff80032dc24e): Kernel trap at 0xffffff80032a87e3, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000109e19000, CR3: 0x000000000578e000, CR4: 0x00000000001606e0
    RAX: 0x0000000000000040, RBX: 0x001e3de600010000, RCX: 0xffffff80038d0320, RDX: 0xffffff80038d01c0
    RSP: 0xffffff810d5fbc70, RBP: 0xffffff810d5fbd80, RSI: 0xffffff8008adc0b0, RDI: 0xffffff80038d01c0
    R8:  0x0000000000000000, R9:  0x0000000000000010, R10: 0x0000000000000001, R11: 0xffffff800322fe40
    R12: 0xffffff80038d0570, R13: 0x00000000001ae747, R14: 0x0000000000000001, R15: 0x0000000000000025
    RFL: 0x0000000000010206, RIP: 0xffffff80032a87e3, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000109e19000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80e5307c50 : 0xffffff8003222f79
    0xffffff80e5307cd0 : 0xffffff80032dc24e
    0xffffff80e5307ea0 : 0xffffff80032f3746
    0xffffff80e5307ec0 : 0xffffff80032a87e3
    0xffffff810d5fbd80 : 0xffffff8003681300
    0xffffff810d5fbef0 : 0xffffff80036e1f6f
    0xffffff810d5fbf00 : 0xffffff800369b8cc
    0xffffff810d5fbf20 : 0xffffff800324a20a
    0xffffff810d5fbfb0 : 0xffffff80032d7417
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: XXXXXXXXXX
    Kernel slide:     0x0000000003000000
    Kernel text base: 0xffffff8003200000
    System model name: MacBookPro9,2 (Mac-XXXXXXXX)
    System uptime in nanoseconds: 12133027063361
    last loaded kext at 12126462633739: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8514b000, size 49152)
    last unloaded kext at 11457958413580: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8514b000, size 32768)
    loaded kexts:
    com.apple.driver.AppleIntelMCEReporter 104
    com.apple.filesystems.afpfs 11.1
    com.apple.nke.asp-tcp 8.0.1
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleIntelHD4000Graphics 8.2.8
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleIntelFramebufferCapri 8.2.8
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.security.SecureRemotePassword 1.0
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.iokit.IOAcceleratorFamily2 98.22
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.CoreStorage 380
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    ================================================
    Anonymous UUID:       XXXXXXXXXXX
    Wed Oct  1 12:10:05 2014
    panic(cpu 2 caller 0xffffff802b8dc24e): Kernel trap at 0xffffff802b8a42c0, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x000000000f0ab000, CR3: 0x000000022136b08e, CR4: 0x00000000001606e0
    RAX: 0xffffff802bed0320, RBX: 0x0000000000000025, RCX: 0x0000000000000025, RDX: 0x001778a600020000
    RSP: 0xffffff813719bd00, RBP: 0xffffff813719bd20, RSI: 0xffffff8032ed3df0, RDI: 0xffffff802bed0570
    R8:  0xffffff8033110728, R9:  0xffffff8032faed40, R10: 0x0000000000000000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff8050405f80, R14: 0x0000000000000069, R15: 0xffffff8032faed40
    RFL: 0x0000000000210282, RIP: 0xffffff802b8a42c0, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x000000000f0ab000, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff812d90ddf0 : 0xffffff802b822f79
    0xffffff812d90de70 : 0xffffff802b8dc24e
    0xffffff812d90e040 : 0xffffff802b8f3746
    0xffffff812d90e060 : 0xffffff802b8a42c0
    0xffffff813719bd20 : 0xffffff802b8a4f65
    0xffffff813719bd50 : 0xffffff802b879033
    0xffffff813719bf20 : 0xffffff802b8dc68c
    0xffffff813719bfb0 : 0xffffff802b8f364b
    BSD process name corresponding to current thread: Google Chrome He
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: XXXXXXXXX
    Kernel slide:     0x000000002b600000
    Kernel text base: 0xffffff802b800000
    System model name: MacBookPro9,2 (Mac-XXXXXXXX)
    System uptime in nanoseconds: 13240283519708
    last loaded kext at 12513142203574: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fad74b000, size 49152)
    last unloaded kext at 12584738581143: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fad74b000, size 32768)
    loaded kexts:
    com.apple.filesystems.afpfs 11.1
    com.apple.nke.asp-tcp 8.0.1
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleIntelHD4000Graphics 8.2.8
    com.apple.driver.AppleIntelFramebufferCapri 8.2.8
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.security.SecureRemotePassword 1.0
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOAcceleratorFamily2 98.22
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.driver.CoreStorage 380
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IO80211Family 640.36
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    ================================================
    Anonymous UUID:       XXXXXX
    Fri Oct 10 22:39:52 2014
    panic(cpu 3 caller 0xffffff8020cdc24e): Kernel trap at 0xffffff8020ca42c0, type 13=general protection, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000035c56000, CR3: 0x00000000858c80b8, CR4: 0x00000000001606e0
    RAX: 0xffffff80212d0320, RBX: 0x0000000000000025, RCX: 0x0000000000000025, RDX: 0x00251d6600020000
    RSP: 0xffffff8141f63d00, RBP: 0xffffff8141f63d20, RSI: 0xffffff802c33f3f0, RDI: 0xffffff80212d0570
    R8:  0xffffff8028b38928, R9:  0xffffff802c3d2ad8, R10: 0x0000000035c9b000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff804dd51260, R14: 0x0000000000000084, R15: 0xffffff802c3d2ad8
    RFL: 0x0000000000010282, RIP: 0xffffff8020ca42c0, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000035c56000, Error code: 0x0000000000000000, Fault CPU: 0x3
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8122ec5df0 : 0xffffff8020c22f79
    0xffffff8122ec5e70 : 0xffffff8020cdc24e
    0xffffff8122ec6040 : 0xffffff8020cf3746
    0xffffff8122ec6060 : 0xffffff8020ca42c0
    0xffffff8141f63d20 : 0xffffff8020ca4f65
    0xffffff8141f63d50 : 0xffffff8020c79033
    0xffffff8141f63f20 : 0xffffff8020cdc68c
    0xffffff8141f63fb0 : 0xffffff8020cf364b
    BSD process name corresponding to current thread: Google Chrome He
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: XXXXXX
    Kernel slide:     0x0000000020a00000
    Kernel text base: 0xffffff8020c00000
    System model name: MacBookPro9,2 (Mac-XXXXXXX)
    System uptime in nanoseconds: 88915375202175
    last loaded kext at 88230087275581: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fa2b97000, size 49152)
    last unloaded kext at 88295369975570: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7fa2b97000, size 32768)
    loaded kexts:
    com.apple.filesystems.afpfs 11.1
    com.apple.nke.asp-tcp 8.0.1
    com.apple.filesystems.smbfs 2.0.2
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.X86PlatformShim 1.0.0
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.driver.AppleIntelHD4000Graphics 8.2.8
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleIntelFramebufferCapri 8.2.8
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBXHCI 683.4.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.security.SecureRemotePassword 1.0
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.kext.triggers 1.0
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOAcceleratorFamily2 98.22
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.X86PlatformPlugin 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.CoreStorage 380
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1

  • Even I cant believe this is happening again! i'm once again asking for help with my account.  Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

    Even I cant believe this is happening again! i'm once again asking for help with my account.  Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

    I guess I spoke too soon!  I really can't believe this nightmare is not over yet! My account is still wrong.  The credit that I was due totaled $63.00  I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72.  I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible?  None of the late fees were credited and the amount due for my monthly charges are wrong.  Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20.  The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money.  I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change!  I lost money once again due to the verizon rep's.  so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account.  Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end!  I need real help!
    >> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

  • WRT 110 as an access point

    I have two WRT 110 and I am using one as a wireless router and I wish to use one as a wireless access point, but cannot get them to connect. I have tried it manually and using the wireless protected setup. Is there anything that needs to be cofigured in the router to use it as an access point only? Any help or advice would be appreciated.

    You can not connect them wirelessly, you must connect via Ethernet cable.
    You may go here to find out how to cascade two routers.

  • Please help with SQL amount calulation

    -- Results
    with t as ( 
    select 'P11877' Mstr_Program,   1 Year_of_study, 'BUSI1490' program_module,  20 no_of_stud,    1 rank,   30 program_credits,  30 cumm_credits   from dual union all
    select 'P11877',                1,              'COMP1365',                 20,               2,        30,                  60               from dual union all
    select 'P11877',                1,              'BUSI1375',                 20,               3,        30,                  90               from dual union all
    select 'P11877',                1,              'COMP1363',                 20,               4,        30,                  120              from dual union all
    select 'P11877',                2,              'MARK1174',                 8,                1,        30,                  30               from dual union all
    select 'P11877',                2,              'FINA1068',                 8,                2,        15,                  45               from dual union all
    select 'P11877',                2,              'INDU1062',                 8,                3,        30,                  75               from dual union all
    select 'P11877',                2,              'BUSI1329',                 8,                4,        15,                  90               from dual union all
    select 'P11877',                2,              'MARK1138',                 8,                5,        30,                  120              from dual)
    select * from t;-- Each MSTR_PROGRAM can have 1 or many program_module
    -- MSTR_PROGRAM's can run for 1 or 2 years (case above is two years) so some modules run in year 1 and some in year 2
    -- NO_OF_STUD is the number of students on the module
    -- RANK basically ranks the modules by the number of students on them grouped by program and year
    -- e.g.row_number() OVER (PARTITION BY Mstr_Program, Year_of_study) ORDER BY COUNT(STUDENT_ID) DESC) rank
    -- PROGRAM_CREDITS: each module has a fixed number of credits
    -- CUMM_CREDITS: Increments the credit count of modules
    -- SUM(program_credits * 10) OVER (PARTITION BY Mstr_Program, Year_of_study
    -- ORDER BY count(STUDENT_ID) desc ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) cumm_credits
    -- I want to trim of any modules once the CUM_CREDITS hits 120. As seen above. I achieve this by wrapping the main query is another SELECT then LIMIT
    -- that WHERE cum_credit <=120.
    -- But what I need is:
    -- In some cases the the cumm_credit maybe on lets say 90credits then the next module is worth 40 credits. This next module will not show as it
    -- will be greater than 120 credits, so i need to pro-rata it:
    -- So if credit_count > 120, then the last module is counted pro-rata as follows: 1- ((credit count - 120) / credits from last module
    -- Can anyone help with how I can incorporate this into my current code: The SELECT portion of the Original SQL is below: I simplified column names
    -- e.t.c in the above so they wont be the same
    SELECT * FROM (
         SELECT
               ,SR_PROGRAM Mstr_Program
               ,DECODE (SORLCUR_YEAR, 1, 1,
                                      2, 2,
                                      3, 3,
                                      4, 3, SR_YEAR) year_of_study
               ,SCT_SUBJ_CODE||SCT_CRSE_NUMB program_module
               ,COUNT(student_ID)                    no_of_stud
               ,row_number() OVER (PARTITION BY sr_program,
                                            DECODE (sr_year, 1, 1,
                                                                  2, 2,
                                                                  3, 3,
                                                                  4, 3, SR_YEAR) ORDER BY COUNT(student_id) DESC, scbcrse_title asc) rank
               ,(SCT_CREDIT_HRS * 10) program_credits
               ,SUM(SCT_CREDIT_HRS * 10) OVER (PARTITION BY sr_program, DECODE (sorlcur_year, 1, 1,
                                                                                                       2, 2,
                                                                                                       3, 3,
                                                                                                       4, 3, SR_YEAR)
                                                    ORDER BY count(student_id) desc ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) cumm_credits
    WHERE cumm_credit <=120
    ORDER BY Mstr_Program, YEAR_OF_STUDY, RANK asc;

    Maybe
    SELECT Mstr_Program,year_of_study,program_module,no_of_stud,rank,program_credits old_program_credits,cumm_credits old_cumm_credits,
           case when cumm_credits > 120
                then program_credits - cumm_credits + 120
                else program_credits
           end new_program_credits,
           case when cumm_credits > 120
                then 120
                else cumm_credits
           end new_cumm_credits
      FROM (SELECT SR_PROGRAM Mstr_Program,
                   DECODE(SORLCUR_YEAR,1,1,2,2,3,3,4,3,SR_YEAR) year_of_study,
                   SCT_SUBJ_CODE||SCT_CRSE_NUMB program_module,
                   COUNT(student_ID) no_of_stud,
                   row_number() OVER (PARTITION BY sr_program,DECODE(sr_year,1,1,2,2,3,3,4,3,SR_YEAR)
                                          ORDER BY COUNT(student_id) DESC,scbcrse_title) rank,
                   10 * SCT_CREDIT_HRS program_credits,
                   10 * SUM(SCT_CREDIT_HRS) OVER (PARTITION BY sr_program,DECODE(sorlcur_year,1,1,2,2,3,3,4,3,SR_YEAR)
                                                      ORDER BY count(student_id) desc
                                                  ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) cumm_credits
    WHERE 0 <= case when cumm_credits > 120
                     then program_credits - cumm_credits + 120
                     else program_credits
                end
    ORDER BY Mstr_Program,YEAR_OF_STUDY,RANKRegards
    Etbin
    Edited by: Etbin on 16.12.2011 8:50
    with
    t as   /* simulating the result achieved */
    (select 'P11877' Mstr_Program,1 Year_of_study, 'BUSI1490' program_module,20 no_of_stud,1 rank,30 program_credits,30 cumm_credits from dual union all
    select 'P11877',             1,               'COMP1365',               20,           2,     40,                70              from dual union all
    select 'P11877',             1,               'BUSI1375',               20,           3,     30,                100             from dual union all
    select 'P11877',             1,               'COMP1363',               20,           4,     40,                140             from dual union all
    select 'P11877',             2,               'MARK1174',               8,            1,     30,                30              from dual union all
    select 'P11877',             2,               'FINA1068',               8,            2,     50,                80              from dual union all
    select 'P11877',             2,               'INDU1062',               8,            3,     30,                110             from dual union all
    select 'P11877',             2,               'BUSI1329',               8,            4,     50,                160             from dual union all
    select 'P11877',             2,               'MARK1138',               8,            5,     30,                190             from dual
    select Mstr_Program,Year_of_study,program_module,no_of_stud,rank,program_credits old_credits,cumm_credits old_cumm,
           case when cumm_credits > 120
                then program_credits - cumm_credits + 120
                else program_credits
           end new_program_credits,
           case when cumm_credits > 120
                then 120
                else cumm_credits
           end new_cumm_credits
      from t
    where 0 <= case when cumm_credits > 120
                     then program_credits - cumm_credits + 120
                     else program_credits
                end

  • Newbie - Help With templates

    I am fairly new to dreamweaver. Looking to put together a
    basic site for a holiday home for rent. Would like to include
    photos of the house and surrounding area, travel details, details
    of things to do and see, calendar, temeperature charts etc. Can
    anyone suggest where I can get my hands on templates that would
    help with this?
    Many thanks

    The best I've seen are from ProjectSeven -
    http://www.projectseven.com/
    They are commercial (look at the Page Packs) and they are
    excellent.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Gusley5" <[email protected]> wrote in
    message
    news:[email protected]...
    >I guess sources for templates is what I'm looking for.
    I've little
    >knowledge
    > of writing code so was looking for a draft template
    which would have a
    > professional look to it with regard to font, layout,
    colours, buttons to
    > use
    > for links etc. I suppose some sort of table layout for
    including photos
    > with
    > related text may be best place to start.
    >
    > Code below is from a starter page available from
    dreamweaver. Any other
    > suggestions for templates gratefully received.
    >
    > Thanks
    >
    > <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN"
    > "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    > <html xmlns="
    http://www.w3.org/1999/xhtml">
    > <!-- DW6 -->
    > <head>
    > <!-- Copyright 2005 Macromedia, Inc. All rights
    reserved. -->
    > <title>Lodging - Catalog</title>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1" />
    > <link rel="stylesheet"
    >
    href="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltI
    > n/StarterPages/mm_lodging1.css" type="text/css" />
    > </head>
    > <body bgcolor="#999966">
    > <table width="100%" border="0" cellspacing="0"
    cellpadding="0">
    > <tr>
    > <td width="15"
    nowrap="nowrap"> </td>
    > <td height="60" colspan="2" class="logo"
    nowrap="nowrap"><br />
    > WEBSITE NAME HERE</td>
    > <td width="100%"> </td>
    > </tr>
    >
    > <tr bgcolor="#ffffff">
    > <td colspan="4"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
    border="0"
    > /></td>
    > </tr>
    >
    > <tr bgcolor="#a4c2c2">
    > <td width="15"
    nowrap="nowrap"> </td>
    > <td height="36" id="navigation"
    class="navText"><a
    > href="javascript:;">HOME</a></td>
    > <td> </td>
    > <td width="100%"> </td>
    > </tr>
    >
    > <tr bgcolor="#ffffff">
    > <td colspan="4"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_spacer.gif" alt="" width="1" height="1"
    border="0"
    > /></td>
    > </tr>
    >
    > <tr bgcolor="#ffffff">
    > <td valign="top" width="15"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_spacer.gif" alt="" width="15"
    height="1" border="0"
    > /></td>
    > <td valign="top" width="35"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_spacer.gif" alt="" width="35"
    height="1" border="0"
    > /></td>
    > <td width="710" valign="top"><br />
    > <table border="0" cellspacing="0" cellpadding="2"
    width="610">
    > <tr>
    > <td colspan="7" class="pageName">Page Name
    Here</td>
    > </tr>
    > <tr>
    > <td width="22%" height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td width="22%" height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td width="22%" height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td width="22%" height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > </tr>
    > <tr>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > </tr>
    > <tr>
    > <td colspan="7"> </td>
    > </tr>
    > <tr>
    > <td height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > <td> </td>
    > <td height="110"><img
    >
    src="file:///C|/Program%20Files/Macromedia/Dreamweaver%208/Configuration/BuiltIn
    > /StarterPages/mm_product_sm.gif" alt="small product
    photo" width="110"
    > height="110" border="0" /></td>
    > </tr>
    > <tr>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > <td> </td>
    > <td valign="top" class="calendarText"
    nowrap="nowrap"><a
    > href="javascript:;">Product Name</a><br
    />
    > Price: $0.00</td>
    > </tr>
    > <tr>
    > <td colspan="7"> </td>
    > </tr>
    > </table> </td>
    > <td> </td>
    > </tr>
    >
    > <tr>
    > <td width="15"> </td>
    > <td width="35"> </td>
    > <td width="710"> </td>
    > <td width="100%"> </td>
    > </tr>
    > </table>
    > </body>
    > </html>
    >

  • Need Help with Listener on JInternalFrame

    Below is the code as it is currently.
    public class addCustomer extends JInternalFrame implements ActionListener{
    //Variable declarations here
    private JPanel panel = new JPanel();
    private JLabel label1,label2,label3,label4,label5,label6,label7,label8,label9,icon1;
    private JTextField CustNum,CFName,CSName,Address1,Address2,City,PostCode,Tel,Cell;
    private JButton Cancel, Add;
    private ImageIcon pic,FrmPic;
    addCustomer() {
    super ("Add New Customer",true,true,true,true);
    setSize(350,370);
    setResizable(false);
    On the Frame I have a textfield that I would like to add a listener to. When text is typed into the textfield it should enable a JButton on the frame. My problem is that as soon as I implement KeyListener or EventListener on the above code I get an error of the class is not defined as abstract. If I define it as abstract my main declaration that looks like this gives me an error :
    public static void main(String args[]){
    new Video().show();
    Can anyone help me with a work around.
    Alexander

    Still have an error in the code. I don't know what I am doing wrong. this is the code so far.
    //This class will create the the Panel for Adding new Customers
    package VideoShop;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.sql.*;
    import java.io.*;
    import javax.swing.event.*;
    public class addCustomer extends JInternalFrame implements ActionListener{
    //Variable declarations here
    private JPanel panel = new JPanel();
    private JLabel label1,label2,label3,label4,label5,label6,label7,label8,label9,icon1;
    private JTextField CustNum,CFName,CSName,Address1,Address2,City,PostCode,Tel,Cell;
    private JButton Cancel, Add;
    private ImageIcon pic,FrmPic;
    addCustomer() {
    super ("Add New Customer",true,true,true,true);
    setSize(350,370);
    setResizable(false);
    //Sets the layout for the panel
    panel.setLayout(null);
    //Creates the labels
    label1 = new JLabel("Customer Nr");
    label2 = new JLabel("First Name");
    label3 = new JLabel("Surname");
    label4 = new JLabel("Address");
    label5 = new JLabel("Address");
    label6 = new JLabel("City");
    label7 = new JLabel("Postcode");
    label8 = new JLabel("Tel Nr");
    label9 = new JLabel("Cell Nr");
    //Creates the Textfields
    CustNum = new JTextField();
    CustNum.setEditable(false);
    CFName = new JTextField();
    CSName = new JTextField();
    Address1 = new JTextField();
    Address2 = new JTextField();
    City = new JTextField();
    PostCode = new JTextField();
    Tel = new JTextField();
    Cell = new JTextField();
    //Creates the buttons
    Cancel = new JButton("Cancel");
    Add = new JButton("Add");
    //Sets the alignment of the label controls
    label1.setBounds(20, 20, 90, 20);
    label2.setBounds(20, 50, 90, 20);
    label3.setBounds(20, 80, 90, 20);
    label4.setBounds(20, 110, 90, 20);
    label5.setBounds(20, 140, 90, 20);
    label6.setBounds(20, 170, 90, 20);
    label7.setBounds(20, 200, 90, 20);
    label8.setBounds(20, 230, 90, 20);
    label9.setBounds(20,260,90,20);
    //Sets the alignment of the Textfield controls
    CustNum.setBounds(100,20,90,20);
    CFName.setBounds(100, 50, 90, 20);
    CSName.setBounds(100, 80, 90, 20);
    Address1.setBounds(100, 110, 130, 20);
    Address2.setBounds(100, 140, 130, 20);
    City.setBounds(100, 170, 100, 20);
    PostCode.setBounds(100, 200, 65, 20);
    Tel.setBounds(100,230, 90,20);
    Cell.setBounds(100, 260, 90, 20);
    //Sets the alignment of the Button controls
    Add.setBounds(200, 310, 90, 20);
    Cancel.setBounds(85,310,90,20);
    //Creates an icon on the panel
    pic = new ImageIcon("/VideoShop/NotePad.gif");
    icon1 = new JLabel(pic);
    icon1.setBounds(280,10,50,50);
    //Adds Mnemonics
    Cancel.setMnemonic('c');
    Add.setMnemonic('a');
    //Adds listener to the Cell TextField to help with validation
    Cell.getDocument().addDocumentListener(new DocumentListener(){
    public void changeUpdate(DocumentEvent e){
    public void removeUpdate (DocumentEvent e){    
    adjust(e);
    public void insertUpdate(DocumentEvent e){      //ERROR////////////
    adjust(e);
    //Adds listeners to the buttons on the panel
    Cancel.addActionListener(this);
    Add.addActionListener(this);
    //Adds the controls to the panel
    panel.add(label1);
    panel.add(label2);
    panel.add(label3);
    panel.add(label4);
    panel.add(label5);
    panel.add(label6);
    panel.add(label7);
    panel.add(label8);
    panel.add(label9);
    panel.add(CustNum);
    panel.add(CFName);
    panel.add(CSName);
    panel.add(Address1);
    panel.add(Address2);
    panel.add(City);
    panel.add(PostCode);
    panel.add(Tel);
    panel.add(Cell);
    panel.add(Cancel);
    panel.add(Add);
    panel.add(icon1);
    //Gets the next customer number from the database
    //Variables for the database
    String dbuser = "";
    String dbpasswd = "";
    String DriverPrefix = "jdbc:odbc:";
    String DataSource = "Video";
    //Holds the value from the database
    String val1;
    //SQL String for writing data to database
    String SQLstring = "SELECT CustNum FROM Customers";
    //Loads the driver for the database
    try {
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    } catch (Exception e) {
    JOptionPane.showMessageDialog(null,"Error Loading driver\n"+e,"Driver Load Error",JOptionPane.WARNING_MESSAGE);
    Statement stmt = null;
    Connection con = null;
    //Create a connection to the database.
    try {
    con = DriverManager.getConnection(DriverPrefix+DataSource,dbuser, dbpasswd);
    stmt = con.createStatement();
    }catch (Exception e) {
    JOptionPane.showMessageDialog(null,"Cannot connect to Database\n"+e,"Connection Error",JOptionPane.WARNING_MESSAGE);
    ResultSet rs = null;
    //Gets data from the database
    try {
    rs = stmt.executeQuery(SQLstring);
    while (rs.next()){
    val1 = rs.getString(1);
    int val2 = Integer.parseInt(val1);
    val2++;
    CustNum.setText(String.valueOf(val2));
    } catch (Exception e){
    JOptionPane.showMessageDialog(null,"Cannot connect to database\n"+e,"Communication Error",JOptionPane.WARNING_MESSAGE);
    try {
    con.close();
    } catch (Exception e){
    JOptionPane.showMessageDialog(null,"Cannot close database\n"+e,"Error",JOptionPane.WARNING_MESSAGE);
    //Adds the panel to the InternalFrame and display it
    getContentPane().add(panel);
    show();
    //Here all action events are processed
    public void actionPerformed(ActionEvent e) {
    if (e.getSource() == Cancel){
    dispose();
    if (e.getSource() == Add){
    ToDatabase();
    //Here the document event is processed
    public void adjust(DocumentEvent e){
    Cell.setEnabled(e.getDocument().getLength()>0);
    //Here the data will be sent to the database
    public void ToDatabase() {
    //Variables for the database
    String dbuser = "";
    String dbpasswd = "";
    String DriverPrefix = "jdbc:odbc:";
    String DataSource = "Video";
    //SQL String for writing data to database
    String SQLstring ="INSERT INTO Customers VALUES('"+CustNum.getText()+"', '"+CFName.getText()+"','"+CSName.getText()+"','"+Address1.getText()+"','"+Address2.getText()+"','"+City.getText()+"','"+PostCode.getText()+"','"+Tel.getText()+"','"+Cell.getText()+"')";
    //Loads the driver for the database
    try {
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    } catch (Exception e) {
    JOptionPane.showMessageDialog(null,"Error Loading driver\n"+e,"Driver Load Error",JOptionPane.WARNING_MESSAGE);
    Statement stmt = null;
    Connection con = null;
    //Create a connection to the database.
    try {
    con = DriverManager.getConnection(DriverPrefix+DataSource,dbuser, dbpasswd);
    stmt = con.createStatement();
    }catch (Exception e) {
    JOptionPane.showMessageDialog(null,"Cannot connect to Database\n"+e,"Connection Error",JOptionPane.WARNING_MESSAGE);
    //Transfer data to database
    try {
    stmt.executeUpdate(SQLstring);
    con.close();
    } catch (Exception e) {
    JOptionPane.showMessageDialog(null,"Cannot update database\n"+e,"Communication Error",JOptionPane.WARNING_MESSAGE);
    dispose();
    The error that I receive is this:
    VideoShop/addCustomer.java [98:1] <anonymous VideoShop.addCustomer$1> is not abstract and does not override abstract method changedUpdate(javax.swing.event.DocumentEvent) in javax.swing.event.DocumentListener
    public void insertUpdate(DocumentEvent e){      //ERROR////////////
    ^
    1 error
    Errors compiling addCustomer.
    Is there a way around this or should I rewrite the whole class.
    Thanks
    Alexander

  • Help with if statement in cursor and for loop to get output

    I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
    I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
    Here is my cursor:
    /*Cursor for Email procedure. It is working Shows userid and the string
    You need to update these folders*/
    DECLARE
    a_user varchar2(200) := null;
    v_assigneduser varchar2(20);
    v_folderrsn varchar2(200);
    v_emailaddress varchar2(60);
    v_subject varchar2(200);
    Cursor c IS
    SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
    MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
    trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
    --MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
    FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
    WHERE f.foldertype = 'HJ'
    AND f.statuscode NOT IN (20, 40)
    AND f.folderrsn = fp.folderrsn
    AND fp.processrsn = fpa.processrsn
    AND vu.userid = fp.assigneduser
    AND vu.statuscode = 1
    GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
    ORDER BY fp.assigneduser;
    BEGIN
    FOR c1 IN c LOOP
    IF (c1.assigneduser = v_assigneduser) THEN
    dbms_output.put_line(' ' || c1.folderrsn);
    else
    dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
    END IF;
    a_user := c1.assigneduser;
    v_assigneduser := c1.assigneduser;
    v_folderrsn := c1.folderrsn;
    v_emailaddress := c1.emailaddress;
    v_subject := 'Subject: Project for';
    END LOOP;
    END;
    The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
    emailaddress
    Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
    v_folderrsn
    v_folderrsn
    etc
    [email protected]......
    Subject: 'Project for: ' Jim...'not updated in the last 30 days'
    284087
    292709
    [email protected].....
    Subject: 'Project for: ' Kim...'not updated in the last 30 days'
    185083
    190121
    190132
    190133
    190159
    190237
    284109
    286647
    294631
    322922
    [email protected]....
    Subject: 'Project for: Joe...'not updated in the last 30 days'
    183332
    183336
    [email protected]......
    Subject: 'Project for: Sam...'not updated in the last 30 days'
    183876
    183877
    183879
    183880
    183881
    183882
    183883
    183884
    183886
    183887
    183888
    This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
    Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
    JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
    JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
    KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
    KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
    KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
    KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
    KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
    KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
    KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
    JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
    JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
    SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
    PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
    PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
    NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
    NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
    NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
    NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
    NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
    NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
    NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
    NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
    NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
    NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
    NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
    NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
    NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
    NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
    NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
    MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
    [email protected]/27/2004.......3/8/2004............1631
    How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
    Edited by: user4653174 on Aug 25, 2008 2:40 PM

    analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
    CASE
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
    Incorporating either of these into your query should assist you in returning the desired results.

  • I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

    I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
    Thank you in advance,

    Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

Maybe you are looking for

  • IPhone 5 dead after updating to iOS 8.0.2

    After updating from 7.1.2 to 8.0.2, my iPhone 5 cannot charge and is not recognized by my Mac.  All original cables.   After 24 hours, the battery is dead, so there is no way to even find a solution by restoring or anything.  It is a brick.  If I wer

  • Formatting flat file in SSIS

    I have an output table with  CREATE TABLE [dbo].[Extract_wt_693_Truven_Intel_PharmacyClaims_Output]( [RowId] [int] IDENTITY(1,1) NOT NULL, [OutputRow] [nvarchar](420) NULL, [Modified] [datetime] NULL, PRIMARY KEY CLUSTERED [RowId] ASC )WITH (PAD_INDE

  • Report Description in BI - how to..

    Hello, I want to create for various reports a description ("What does the report say"). One way can be to create a link to the document in the WebTemplate. But this is a static variant. Target is to create a dynamic variant. That means that in the We

  • Can we Implement YTD using MDX syntax in olap universe.

    Hi, I am trying to implement YTD prompt from universe level. Can any one suggest how can i implement it using MDX syntax in olap universe. Regards, Anil Kumar.

  • Personalize link on SSHR Benefits page missing

    Hi. I was hoping someone may have seen this behaviour and can help. Navigation: Employee Self Service > Benefits Unexpectedly, there is no sign of the Personalize link. It is seen on other pages. Same result on multiple browsers. Profile Options: a.