Help with WRVS4400N - Need to find a replacement AC Adapter

Hello, I have a Cisco WRVS4400N V2. I need to find a replacement AC adapter and the stands if possble. Can anyone direct me to the right place? Thanks.

Mike,
unfortunately we do not stock or have product numbers for the AC adapter or the stands. Any universal AC adapter should work provided that it provides the following power requirements:
Power
12V 1A
Hope this helps,
Blake Wright
Cisco SBSC Network Engineer

Similar Messages

Need advanced "Find and Replace" method

I have bunch of pages need "Find and Replace" work in html
coding, but I can't use DW's "Find and Replace" function to do with
it. Here's the sample code:
quote:
"<tr valign="top"><td align="center"><a href="
../photo/ccg/pages/Columbus Grill
M_jpg.htm"><img src="../photo/ccg/thumbnails/Columbus
Grill M_jpg.gif" border="0" onClick="MM_openBrWindow('
../photo/ccg/pages/50th Yard
M_jpg.htm','rr','width=386,height=306')"> 
Columbus Grill M</td>
<td align="center"><a href="
../photo/ccg/pages/Columbus Grill
W_jpg.htm"><img src="../photo/ccg/thumbnails/Columbus
Grill W_jpg.gif" border="0" onClick="MM_openBrWindow('
../photo/ccg/pages/50th Yard
M_jpg.htm','rr','width=386,height=306')"> 
Columbus Grill W</td>
<td align="center"><a href="
../photo/ccg/pages/Cookies Lounge
M_jpg.htm"><img src="../photo/ccg/thumbnails/Cookies
Lounge M_jpg.gif" border="0" onClick="MM_openBrWindow('
../photo/ccg/pages/50th Yard
M_jpg.htm','rr','width=386,height=306')"> 
Cookies Lounge M</td>
<td align="center"><a href="
../photo/ccg/pages/Cookies Lounge
W_jpg.htm"><img src="../photo/ccg/thumbnails/Cookies
Lounge W_jpg.gif" border="0" onClick="MM_openBrWindow('
../photo/ccg/pages/50th Yard
M_jpg.htm','rr','width=386,height=306')"> 
Cookies Lounge W</td>
<td align="center"><a href="
../photo/ccg/pages/Corcorans
M_jpg.htm"><img src="../photo/ccg/thumbnails/Corcorans
M_jpg.gif" border="0" onClick="MM_openBrWindow('
../photo/ccg/pages/50th Yard
M_jpg.htm','rr','width=386,height=306')"> 
Corcorans M</td>
</tr>"
You can see I need to use EVERY highlighted code to replace
each NEXT bolded code, highlighted code are deffirent but bolded
code are the same. Now I just do it manually, but there are
thousands of them.
Is any one has a better method using DW's "Find and Replace"
function to do this job automatically?

Using Templates with a 900 page site is a crime against
humanity. You reach
the optimal size for Templates between about 50 and 100.
The error you are getting suggests that there are coding
errors on the page
(perhaps even unrelated to ANY DW Template markup). We'd need
to see the
page to make progress with what that might be, as Alan says.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RyanWaters" <[email protected]> wrote in
message
news:ggs7fq$gnq$[email protected]..
>I am a little green to this all. I am trying to find and
replace a word
>inside
> the edit region and Dreamweaver will not change it,
because it says its
> inside
> a locked region, but its a editable region?
> I have about 900 pages I need to make this change on and
was relying on
> the
> find and replace tool to do that. I tried differn't
advanced options,
> nothing
> seams to change it. I am using cs3. Thanks for any help
>

Need help with iPhoto, Need help with iPhoto

Hey there!!!
When I plug in my iPhone I go to iPhoto and can choose to import the pictures. I also tried Image Capture as it seemed easier to organise my pictures, making folders, sub-folders, etc. The problem with this is everytime I plug my iPhone into the computer click on Import the system automatically makes second, third, fourth, etc copies of each picture. This also means that there is a copy of my pictures on iPhoto and on Image Capture - which I do not really need.
I have tried to make Albums and Folders on iPhoto. Sometimes when I delete a picture as it has been saved in two albums it gets deleted from both albums. Why is this? How can I make Albums or Folders to organise my pictures. If my pictures are transferred directly onto iPhoto, can I find them anywhere else in my computer? If I wanted to burn pictures from various albums on a disc how could I do that on iPhoto? Also I dont want events to create themselves. How can I avoid this?
I would like help with either using iPhoto or know how the stop the duplicating of pictures on Image Capture.
Maybe there is a better way I can transfer the pictures onto my MacBook??
Thanks a mil!!!

Are you running a "referenced" or "managed' library?
Image Capture does not store phortos in it. It's an application for uploading photos to wherever you tell it to, either a folder on the hard drive or into iPhoto. If you want to use only Image Capture to upload your photos to iPhoto then set iPhoto's General preferences to the following:
Deleting Photos from an iPhoto Library:
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurances of that photo in the library.
OT

NEED HELP WITH QUERY, NEED NEWEST RECORD ONLY

Hi all,
Here goes,
I have an assingment in which i need to find the agents who allow the footballers to break the rules.
So far i have 41 results, in which there is 4 agents and 24 footballers, and the same footballer has broken more than one rule or the rule more than once.
What i now need is to arrange so that each footballer on shows up once no matter how many times they have broken the rules.
i have
SELECT
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
FROM
agents a, transfers t, footballers f, footballers_fees fo
WHERE
a.agent_id = t.broker_id
AND
t.footballer_id = f.footballer_id
AND
f.footballer_id = fo.footballer_id
AND
(RULE 1 BROKEN AND RULE 2 BROKEN
OR
RULE 1 BROKEN AND RULE 2 NOT BROKEN
OR
RULE 1 NOT BROKEN AND RULE 2 BROKEN)
GROUP BY
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
ORDER BY
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
(I havent typed out the SQL for the rules 1 and 2 but i know it works)
Now i need to show only each footballer once whether they have broken either rule and more than once or not.
I have been staring at the screen for near enough 10 hours and any help or ideas would be greatly appreciated
Thanks all :)

884080 wrote:
Hi all,
Here goes,
I have an assingment in which i need to find the agents who allow the footballers to break the rules.
So far i have 41 results, in which there is 4 agents and 24 footballers, and the same footballer has broken more than one rule or the rule more than once.
What i now need is to arrange so that each footballer on shows up once no matter how many times they have broken the rules.
i have
SELECT
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
FROM
agents a, transfers t, footballers f, footballers_fees fo
WHERE
a.agent_id = t.broker_id
AND
t.footballer_id = f.footballer_id
AND
f.footballer_id = fo.footballer_id
AND
(RULE 1 BROKEN AND RULE 2 BROKEN
OR
RULE 1 BROKEN AND RULE 2 NOT BROKEN
OR
RULE 1 NOT BROKEN AND RULE 2 BROKEN)
GROUP BY
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
ORDER BY
t.transfer_time || ' ' || a.first_name || ' ' || a.last_name || ' ' || f.first_name || ' ' || f.last_name || ' ' || f.footballer_id || ' ' || t.transfer_id
(I havent typed out the SQL for the rules 1 and 2 but i know it works)
Now i need to show only each footballer once whether they have broken either rule and more than once or not.
I have been staring at the screen for near enough 10 hours and any help or ideas would be greatly appreciated
Thanks all :)Realize that we don't have your tables or data, so we can't run, test, or improve your SQL.
so what exactly do you expect from us?

Help needed to find a replacement HDD for Dell Studio 1558

Hi,
My laptop HDD is 5 yr old and started to give a lot of read/write errors recently, I'm also finding very difficult to back the data from my laptop to my Seagate external HDD.When I copy the files to external HDD it gives I/O error. When multiple files are copied the fan runs at high speed makes lot of noise and the laptop.shuts down due to overheating. Due to this I got a chkdsk to scan and fix the errors on my external drive due to data copy failure taking additional 4hrs to scan for errors. My laptop.internal drive is Seagate momentus ST9500325AS 5400 rpm 500 GB,2.5" internal 8 MB cache SATA 3.0 GB/s drive and find that the drive is unavailable in my country.
I've just seen Seagate momentus Thin ST500LT012 500 GB 5400 RPM 16 MB Cache SATA 3.0 GB/s 2.5" internal Laptop/Notebook Hard disk on Amazon and would like to.know if I can replace my old with this
I was not sure to order this online since it reads thin I doubt if it would be slimmer than the old one and might not be an alternative.
I would also greatly appreciate if someone could suggest an alternative HDD preferably Seagate to replace for Dell 1558 studio
Thanks in advance.
Kar

First try to make a Dell Backup and Recovery 16 GB Bootable USB using the latest version of Dell Backup and Recovery:
http://dellwindowsreinstallationguide.com/dell-backup-and-recovery-1-8-1-71/
The instructions are for Windows 8.1 but should be similar for Windows 7.
New drives will be slimmer. I recommend you replace the HDD with a SSD if you want a significant performance boost. Crucial SSDs include a spacer for seating into your system and guarantee compatibility:
http://www.crucial.com/usa/en/compatible-upgrade-for/Dell/studio-1558

HT4528 hello, i need some help with turning off the 'find my iphone'

I just traded in my iphone for the 5s and Verizon is having some problems deactivating the find my iphone thing on my old phone however it still has it linked up with my old email address that was stolen from me, how do I reset it so I can use my current email address to use my current password?

There is a link to download App Builder when you sign in to the DPS Dashboard (http://digitalpublishing.acrobat.com). There is also a link on the DPS install help page.
http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml

Need help with color tints not finding t-slider can you help?

can someone help i'm going bonkers trying to get the tints and colors working
i checked the online help on how to make a color tint.
but the solution tells me if i don't have the "t-slider" make sure the color is checked
as global then go to show options
but this is not helping. i still don't see what i need to make a tint.
i really wish the way to make this work was more like indesign.
please help.
thank you
Message was edited by: [email protected]

You need to make the color a swatch first. Then double click the swatch and check the Global box.

Need help with Services (email from finder using unibox)

I have scoured the discussions and googled to find a solution to my problem and have had zero luck.
Basically I want to be able to right-click on a file in finder and go to services and choose Unibox (my default email app) to send the file. I remember being able to do that using one of the other apps I used to use for email, but have been unsuccessful finding the steps to creating the service.
Any and all help to create that context menu option is appreciated.

Mail/Preferences/General - do you have Unibox set as your default e-mail application?

Help with regular expression to find a pattern in clob

can someone help me writing a regular expression to query a clob that containts xml type data?
query to find multiple occurrences of a variable string (i.e <EMPID-XX> - XX can be any number). If <EMPID-01> appears twice in the clob i want the result as EMPID-01,2 and if EMPID-02 appears 4 times i want the result as EMPID-02,4.

with
ofx_clob as
(select q'~
<EMPID>1
< UNQID>123456
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>2
< UNQID>123457
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>1
< UNQID>123458
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
~' ofx from dual
select '<EMPID>' || to_char(ids) || '(' || to_char(count(*)) || ')' multi_empid
from (select replace(regexp_substr(ofx,'<EMPID>\d*',1,level),'<EMPID>') ids
 from ofx_clob
 connect by level <= regexp_count(ofx,'<EMPID>')
group by ids having count(*) > 1
MULTI_EMPID
<EMPID>1(2)
with
ofx_clob as
(select q'~
<EMPID>1
< UNQID>123456
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>2
< UNQID>123457
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>1
< UNQID>123456
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>2
< UNQID>123456
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
<EMPID>1
< UNQID>123458
< TIMESTAMP>...
< ADDRINFO>
< TITLE>^@~*
< FIRST>ABCD
< MI>
< LAST>EFGH
< ADDR1>ADDR1
< ADDR2>^@~*
< CITY>CITY
~' ofx from dual
select '<EMPID>' || listagg(to_char(ids) || '(' || to_char(count(*)) || ')',',') within group (order by ids) multi_empid
from (select replace(regexp_substr(ofx,'<EMPID>\d*',1,level),'<EMPID>') ids
 from ofx_clob
 connect by level <= regexp_count(ofx,'<EMPID>')
group by ids having count(*) > 1
MULTI_EMPID
<EMPID>1(3),2(2)
Regards
Etbin
Message was edited by: Etbin
used listagg to report more than one multiple <EMPID>

More help with GREP needed

I have been attempting to create some nested styles.
So far, I am getting the hang of it.
I have created a grep style that will make all text after the word "NOTE: " into italic. Also, I have grep style that makes all text that is "FIGURE +\d+\d" into bold text.
The problem I have is that if the word "FIGURE " etc. is in the italicized note text, then it will not become bold.
For example: "Operate the switch to begin the process (FIGURE 3-3). Make sure guards are closed (refer to FIGURE 3-1)."
That works fine, and "FIGURE " is bold. However, when I change the sentence by adding "NOTE: Make sure guards... " it all becomes italic, and I loose the bold on "FIGURE 3-1"
So, is there a way to augment my italic grep with some kind of inclusion... as if I were saying "if "FIGURE +\d+\d" make that is bold italic"
sorry for the long-winded attempt to describe what I want to do.
Thanks in advance for help.
RPP

RPP,
The trouble is that in GREP style you can find text but not formatting, so you can't say something like "find FIGURE only when it's italic". In the Find/Change dialog you can, but in GREP styles you can't.
You also can't say "look for FIGURE if it's preceded by NOTE: and any characters in between". Unfortunately, lookbehind can't cope with variable-length text. So if you always have "NOTE: Refer to FIGURE ...", then you can use lookbehind and you set-up would be this:
apply italic to FIGURE [-\d]+
apply bold to NOTE:.+
apply bold-italic to (?<=NOTE: Refer to )FIGURE [-\d]+
The first parenthetical is a lookbehind: in this case, FIGURE looks behind, meaning you find FIGURE only when it's preceded by "Note: Refer to", which is not matched itself. So bold italics would be applied only to FIGURE [-\d]+, and only when preceded by ...
But you're not likely to have such fixed text. When you have just a few alternatives, you can list them as alternatives, so if you always have "Note: Refer to " or "NOTE: See " you could salvage your set-up, but with more than let's say three alternatives it gets messy.
(?<=NOTE:.+? )FIGURE [-\d]+ , which you would hope would match any text from NOTE: to FIGURE, doesn't work as a lookbehind.
Peter

Help with scripting: need to import Excel files into PS type layers

Howdy all,
I have a series of TV commercials provided to me as layered PS files. I work in CS3 and export to Avid for editing.
For customization, I need to import their Excel list of phone numbers and duplicate each one into a type layer with existing efx and placement.
There are 30-60 #s, which appear in 2 locations, so automation is key (just finished a 45 # series, and they have more!)
I dont know how to script this, and would appreciate any guidance. I am not asking for someone to do it for me, just help me learn what I have to do.
Dave Koslow

From Excel save your file out as either CSV or TDT from the drop down 'save as' options. Once you have a plain text file script will be able to read the text file using which ever delimiter best suits you and create an array of string variables that you can use within photoshop to assign to the contents of a text layer…

[JS] CS3 Help with groups needed

Hi.
I am formatting a page of text frames, and images, and trying to group the selected objects together.
While formatting the pageI am gathering an array of variables:
myGroupArray = new Array();
myGroupCounter = 0;
myGroupArray[myGroupCounter]="myTextFrame";
myGroupCounter++;
etc...
when I am finished a section, I want to group the contents of the vaiable 'myGroupArray'
I am using this line:
myGroup = myDoc.groups.add(myGroupArray);
but getting an error 'Invalid value for parameter 'groupitems' of event 'add'. Expected Array o...t received("myTextFrame","myCorrectPic","myPriceFrame","mtQtyFrame").
Can someone help me on this?
Cheers
Roy

(Without actually trying it in ID)
myGroupArray[myGroupCounter]="myTextFrame";
That adds a string to the array, not the frame. If "myTextFrame" is a variable pointing to a text frame, simply use
myGroupArray[myGroupCounter]=myTextFrame;
By the way, have you been programming in other languages in the past? I have, and used
myGroupCounter++;
as well until finding out that for arrays, this built-in array function works equally well:
myGroupArray.push(myTextFrame);
Types much faster, and if you need the number of elements, you can always use myGroupArray.length.

Need to find a replacement battery for a mid 2007 Mac notebook. MBO061LL/A

Recently picked up a Mid 2007 Mac notebook, white. The battery is shot. Need to pick up a replacement. The batteries available at Amazon don't come with rave reviews. Does anybody have a source or a reputable company where I can pick up a new battery, for a reasonable price?

Here is a link for the battery, the price is not that polite ($90) but it is the right battery I believe.
Check it out ! http://www.ebay.com/itm/NEW-White-Battery-020-5071-B-A1185-for-MacBook-13-A1181- 2006-2007-2008-2009-/221371268219

Help with constuctor, need to rewrite program with this constructor

i need to use this constructor for my Scholar class:
public Scholar(String fullName, double gradePointAverage, int essayScore, boolean scienceMajor){here is the project that i'm doing:
http://www.cs.utsa.edu/~javalab/cs17.../project1.html
here's my code for the Scholar class:package project1;
import java.util.*;
public class Scholar implements Comparable {
 private static Random rand;
 private String fullName;
 private double gradePointAverage;
 private int essayScore;
 private int creditHours;
 private boolean scienceMajor;
 private String lastName;
 private String firstName;
 private double totalScore;
 /** Creates a new instance of Scholar */
 public Scholar(String lastName, String firstName){
 this.fullName = lastName + ", " + firstName;
 this.gradePointAverage = gradePointAverage;
 this.essayScore = essayScore;
 this.creditHours = creditHours;
 this.scienceMajor = scienceMajor;
 this.rand = new Random();
 public String getFullName(){
 return fullName;
 public double getGradePointAverage(){
 return gradePointAverage;
 public int getEssayScore(){
 return essayScore;
 public int getCreditHours(){
 return creditHours;
 public boolean getScienceMajor(){
 return scienceMajor;
 public String setFullName(String lastName, String firstName){
 fullName = lastName + ", " + firstName;
 return fullName;
 public double setGradePointAverage(double a){
 gradePointAverage = a;
 return gradePointAverage;
 public int setEssayScore(int a){
 essayScore = a;
 return essayScore;
 public int setCreditHours(int a){
 creditHours = a;
 return creditHours;
 public boolean setScienceMajor(boolean a){
 scienceMajor = a;
 return scienceMajor;
 public void scholarship(){
 Random doubleGrade = new Random ();
 Random intGrade = new Random ();
 gradePointAverage = doubleGrade.nextDouble() + intGrade.nextInt(4);
 Random score = new Random();
 essayScore = score.nextInt(6);
 Random hours = new Random();
 creditHours = hours.nextInt(137);
 Random major = new Random();
 int num1 = major.nextInt(3);
 if (num1 == 0)
 scienceMajor = true;
 else
 scienceMajor = false;
 public double getScore(){
 totalScore = (gradePointAverage*5) + essayScore;
 if (scienceMajor == true)
 totalScore += .5;
 if (creditHours >= 60 && creditHours <90)
 totalScore += .5;
 else if (creditHours >= 90)
 totalScore += .75;
 return totalScore;
 public int compareTo(Object obj){
 Scholar otherObj = (Scholar)obj;
 double result = getScore() - otherObj.getScore();
 if (result > 0)
 return 1;
 else if (result < 0)
 return -1;
 return 0;
 public static Scholar max(Scholar s1, Scholar s2){
 if (s1.getScore() > s2.getScore())
 System.out.println(s1.getFullName() + " scored higher than " +
 s2.getFullName() + ".\n");
 else
 System.out.println(s2.getFullName() + " scored higher than " +
 s1.getFullName() + ".\n");
 return null;
 public static Scholar max(Scholar s1, Scholar s2, Scholar s3){
 if (s1.getScore() > s2.getScore() && s1.getScore() > s3.getScore())
 System.out.println(s1.getFullName() + " scored the highest" +
 " out of all three students.");
 else if (s2.getScore() > s1.getScore() && s2.getScore() > s3.getScore())
 System.out.println(s2.getFullName() + " scored the highest" +
 " out of all three students.");
 else if (s3.getScore() > s2.getScore() && s3.getScore() > s1.getScore())
 System.out.println(s3.getFullName() + " scored the highest" +
 " out of all three students.");
 return null;
 public String toString(){
 return "Student name: " + fullName + " -" + " Grade Point Average: "
 + gradePointAverage + ". " + "Essay Score: " + essayScore + "."
 + " Credit Hours: " + creditHours + ". " + " Science major: "
 + scienceMajor + ".";
}here's my code for the ScholarTester class:package project1;
import java.util.*;
public class ScholarTester {
public static void main(String [] args){
System.out.println("This program was written by Kevin Brown. \n");
System.out.println("--------Part 1--------\n");
Scholar abraham = new Scholar("Lincoln", "Abraham");
abraham.scholarship();
System.out.println(abraham);
/*kevin.setEssayScore(5);
kevin.setGradePointAverage(4.0);
kevin.setCreditHours(100);
kevin.setFullName("Brown", "Kevin J");
kevin.setScienceMajor(true);
System.out.println(kevin);*/
Scholar george = new Scholar("Bush", "George");
george.scholarship();
System.out.println(george + "\n");
System.out.println("--------Part 2--------\n");
System.out.println(abraham.getFullName() + abraham.getScore() + ".");
System.out.println(george.getFullName() + george.getScore() + ".\n");
System.out.println("--------Part 3--------\n");
if(abraham.compareTo(george) == 1)
 System.out.println(abraham.getFullName() + " scored higher than " +
 abraham.getFullName() + ".\n");
else
 System.out.println(abraham.getFullName() + " scored higher than " +
 abraham.getFullName() + ".\n");
System.out.println("--------Part 4--------\n");
 Scholar.max(abraham, george);
 Scholar thomas = new Scholar("Jefferson", "Thomas");
 thomas.scholarship();
 System.out.println("New student added - " + thomas + "\n");
 System.out.println(abraham.getFullName() + " scored " +
 abraham.getScore() + ".");
 System.out.println(george.getFullName() + " scored " +
 george.getScore() + ".");
 System.out.println(thomas.getFullName() + " scored " +
 thomas.getScore() + ".\n");
 Scholar.max(abraham, george, thomas);
}everything runs like it should and the program is doing fine, i just need to change the format of the Scholar constructor and probably other things. Can someone please give me an idea how to fix this.
Thanks for taking your time reading this.

then don't reply if you're not going to read it, i
just gave the url, Don't get snitty. I'm just informing you that most people here don't want to click a link and read your whole bloody assignment. If you want help, the burden is on you to make it as easy as possible for people to help you. I was only trying to inform you about what's more likely to get you help. If doing things your way is more important to you than increasing your chances of being helped, that's your prerogative.
so you can get an idea on what
it's about, and yeah i know how to add a constructor,
that's very obvious, That's what I thought, but you seemed to be saying, "How do I add this c'tor?" That's why I was asking for clarification about what specific trouble you're having.
i just want to know how to
implement everything correctly, so don't start
flaming people. I wasn't flaming you in the least. I was informing you of how to improve your chances of getting helped, and asking for clarification about what you're having trouble with.

Need to find a replacement camcorder quickly for Imovie 06

Hi
I am looking for a camcorder that plays the dv mini tapes and is compatable with Imovie 06 and Imac.
My old Camcorder has broken down.
I'm not an expert on electronics so I could use all the help I can get.
I have a movie project I am editing right now that has a deadline and I really need to get that camcorder quickly.
The camcorder I have used for 8 years with imovie, is a jvc and its model number is Q77L1648
All the time i've had it, It has worked perfectly and fast with imovie.
Is there a jvc brand that works like my old one?
Does anyone know?
Thank you
-Estari

One more thing
I'm concered about format, because I tried using a samsung Camcorder to play my tapes into imovie 06 and It only showed a bluescreen, when the camcorder monitor showed the movie.
On my Mom's updated imac 2008 model with the 08 Imovie, it showed the movie, but it looked as if it was on old beat up movie with bad sound and picture quality. It also did a lot of stalling in playback mode, really bad.
So I was wondering if the Jvc or any camcorders have a format that is recorded into the dv tapes along with the movie.
That's why I want to stick with another Jvc, although it would make my search a lot easier if that is not a fact.
-Esther

Help with WRVS4400N - Need to find a replacement AC Adapter

Similar Messages

Maybe you are looking for