Help! with X-fi Elite Pro 1. Toslink issue. 2. Phono issue

:Help! with X-fi Elite Pro . Toslink issue. 2. Phono issue? I'm using a Toslink in and out to a JVC receiver. I can play and record computer sounds that play from creative external box through a Toslink into the receiver then into my receiver speakers. However, I can't record any other sound coming out of my receiver through Toslink into back of box.
As a separate issue, I can't get the phono jacks on the external box to work. I've tried it with a direct connect from turntable to external box, with and without turntable preamp on, and with the creative box switch on phono and then with the box switch on aux. I then tried it from line out of receiver to aux in in the back and then to line in in frnt of box. Nothing worked. When I tried those setups, I tried it with toslink out of receiver and then with Toslink in receiver.
I'm using a Dell Vista 64 computer.
Any help with these issues would be appreciated.

Wow, guess nobody can help me out here......

Similar Messages

Problems with X-Fi Elite Pro

Problems with X-Fi Elite Pro? Hello, everyone!
I'm from Brazil and?I'm having a huge problem with my X-Fi Elite Pro.
A few months ago, my video card stopped working and I replaced it!
But then, my audio card stopped working properly as well!
I reinstalled all the drivers (Video AND Audio) and my SB played my music for about 2 minutes before stop working! I reinstall the drivers, works for 2 minutes, and stop! Then I change de mode "Game" to" Audio Creation" and it keep working. But the stop 2 minuts after. Then i change de mode "Audio Creation" to "Entretainment". It works for 2 minutes and stop. If i try the 3. time, works for 2 seconds and stop. It also happens in the 4. attempt... the 5?... the 6?...
In this 2 minutes, it works fine! 00%! But then stops, with?no apparent reason!
Can someone help me? I don't know what to do, anymore!
My PC:
Intel DP35DP Mother Board
GeForce 9800 GT GB
SB X-Fi Elite Pro
4GB Ram
Intel Quad Core 2.3GHz
Windows Vista Ultimate 64bits
(Sorry for the bad english! But... you know, i'm not very good with foreing languages! lol)
Thank you all!
Rodrigo Guidini.

Wow, guess nobody can help me out here......

Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

Hi,
I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M

I have a problem with X-Fi Elite Pro External Cons

Hello there,?I have a problem with my X-Fi Elite Pro External Console, as it seems. I use X-Fi mainly for recording and it was working fine untill I reinstalled Windows. I downloaded the driver off the support page and while audio playing is working fine ; The PC doesn't seem to be recieving any signals when I plugin the guitar through the External Console ... I am not sure what might be causing this problem?and I am in?a desprate need of help. Please advise?Wael

I'm having this exact same problem right now, I came looking for a solution and seemed to have found only people experiencing similiar problems. =[

Can anyone help with a mac book pro gray screen

can anyone help with a macbook pro gray screen

Hi Tom,
Read through the following link and try a Safe Boot: http://support.apple.com/kb/TS2570

Problems with X-Fi Elite Pro Creative Audio Creation Conso

Hi I am Sergio Fucchi from Italy and I am 47 years old and I like to create my own CD from my analog li've recording of jazz and classical music.
I have changed all the top quality of Creative cards: Li've!, Audygy2, Audygy2 ZS, Audygy4 Pro and now X-Fi Elite Pro. Now I have a problem to visualize correctly the console of Audio Creation Mode on my monitor at 800x660 because I can't to resize the windows, but I can only pan it around my screen. With the others modes I have not any problems.
My video card is an ATI All-in-wonders 9600pro with latest drivers, my PC is an AMD-XP 3000+ with a GB fo ram and s.o. is XP SP2.
Thank You.
Sergio Fucchi
Macerata
Italy.

Sorry to tell you that the Audio Creation Mode Console is designed to work only at 024*768 resolution or higher.

[Help] Creative X-Fi Elite Pro Volume Rem

I have?X-Fi Elite Pro soundcard and Megawork 550 5. speaker. As You know that Elite Pro have an I/O console which have a 9 Pin DIN for remote control. Therefore, I connect my I/O Console with my speaker using the 9 PINS DIN Cable provided by Creative. the problem is, i can't adjust the volume of my speaker at all, it always goes to the max volume no matter how i try to adjust it.

Hi,
I have excactly same problem, tried reinstalling/updating GPU drivers, updating chipset drivers, emptying PCI-slots, putting sound card into different PCI-slots.
Also, it does not seem to have any memory, I/O or DMA conflicts with sound card. Maybe IRQ priorities?
This is what Microsoft says about "Code 2"
http://support.microsoft.com/?scid=kb%3Ben-us%3B3023&x=6&y=3
Specs:
GeForce 6600 GT (AGP)
Kingston Valueram 2x52 Mb Dual channel PC-3200
Abit IC7-MAX3, newest BIOS
SB X-Fi XtremeMusic (with most recent drivers)
Changing AGP Aperture Size to 256 Mb seems to fix the problem, thank you.Message Edited by Vilson on 07-20-2006 0:45 PM

Idiot needs help with hanging mac book pro please

can anyone please help me
i have a 13 inch 2013 macbook pro but since yesterday every 30/40 seconds if im trying the spinner circle thing comes up and even now I'm trping faster than my mac can keep up
iv installed nothing recently
im really stuck where to go from here
really sorry if I'm vague but I'm not a computer genius
if all fails then i have to take it back to apple
thanks for any help

EtreCheck version: 2.1.5 (108)
Report generated 3 January 2015 17:53:58 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:36:51
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (635.73 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R   UJ-8A8 disk2 : (329.8 MB)
disk2s1 (disk2s1) <not mounted> : 287 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Untitled Disc (disk2s1s2) /Volumes/Untitled Disc : 286 MB (0 B free)
USB Information: ℹ️
Western Digital External HDD 160.04 GB
WD USB 2 (disk3s1) /Volumes/WD USB 2 : 160.04 GB (64.46 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.tunabellysoftware.TGFanHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.divx.agent.postinstall.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video> [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Perian [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      19% Finder
      2% WindowServer
      0% AppleSpell
      0% DesktopServicesHelper
      0% mds_stores
Top Processes by Memory: ℹ️
429 MB iPhoto
198 MB Finder
180 MB iTunes
144 MB com.apple.WebKit.WebContent
112 MB mds_stores
Virtual Memory Information: ℹ️
1.97 GB Free RAM
4.26 GB Active RAM
1.32 GB Inactive RAM
1.03 GB Wired RAM
3.49 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 03:18:42 PM Self test - passed
Jan 1, 2015, 02:04:03 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-01-140403_[ redacted].cpu_resource.diag [Details]

HT1752 need some help with a '07 macbook pro

need help with my wifes old MacBook pro she had found it during our last move apple said its vintage and they couldn't help

Please indicate what problems you have encountered and provide as much detail as you can. The exact model of the MBP and the Operating System would be useful pieces of information.
Ciao.

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Can anyone help with sharing my MacBook Pro with my smart tv.

Can anyone help with sharing my mac with a smart tv

I have just bought a new smart LG tv with wireless which can share with other products ie iPad , iPhone, computer using there smart share app, however this app is not compatable with a mac. I wondered if anyone could recommend a suitable app.
Thanks

Need help with x-fi / adobe audition monitoring / input issue

Hi all - I've been desperately trying to fix this issue for a long time now. This is the first computer problem that has really got me stumped since, well, since forever. I've searched all over and seen a few tidbits about this issue but I couldn't find anything that could help me actually solve my problem.
The issue is that when I record in audition through the x-fi, as I record a second separate track, whatever I'm monitoring from any other tracks gets recorded onto the second track along with the new recording.
I've found threads saying it's an issue with the mixer, however I'm trying to figure out the audio creation mode in the console launcher and I am absolutely unable to figure out how to be able to monitor track 1 while not having it get recorded to track two. I went through basically each strip and muted/unmuted to see what would happen and nothing ever worked. I also know that it indeed is recording the monitor, as overlaid (not printed) effects are copied to the new track.
I'm using vista, with the following drivers for the x-fi and asio4all.
driver:
5.12.6.1201
11/2/2006
asio4all v 2.7
Sound Blaster® X-Fi™ XtremeMusic (D) Sound Card
What do I do?
THANKS

This may not help, because I've not used ASIO personally, and I'm not as sure of the SBX-Fi's internals, but CL has tended to design cards which have recording taps at each input and at the output of the card. Thus the hardware has supported (dry) recording of individual sources, unmixed, or the mixed output of the card. The Surround Mixer only provides for recording one source, and gives a menu of each source, plus a "What You Hear" source which is actually the (wet) mixed output. You probably only need to figure out how to set things to record a specific source while auditioning the mixed output, and there's probably a way to do that.
-Dave
[email protected]

Help with 2009 13inch MacBook Pro Hard Drive!!!

My hard drive recently died on me and I'm new to everything about hard drives. To replace my old hard drive, I purchased a Seagate Momentus Laptop 320GB 5400RPM 8MB Cache. Is this the right one to buy for basic usage?
Also, when I turn on my computer, there is a flashing folder with a question mark in it, this happened initially when my hard drive died. Is this happening because I need to install the installation CDs?
Please, any help would be great!

Welcome to the Apple Support Communities
That hard drive should work on your MacBook Pro. A question mark appears when your MacBook doesn't find any bootable partition to start, so you can't use your MacBook. To fix it:
1. Replace the hard disk, insert the OS X disc and press C key while your Mac is starting.
2. Go to Utilities > Disk Utility, select your hard disk in the sidebar and go to Partition tab.
3. Select Options and choose GUID Partition Table. Then, press OK, select Mac OS Extended (Journaled) in Format, and select Apply.
4. Install OS X. When the installation finishes, open  > Software Update and update to the latest version

Need help with 24fps in Premiere Pro CS4

I am having issues working with 24fps imported video. My computer hardware is an AMD dual core processor running at 2.6GHz. It has 2GB of Kingston Hyper-X memory, 2x 300GB hard drives (not RAID), and an Nvidia 7900GS video card with 256MB video ram. My operating system is Windows Vista Ultimate with SP1. I am running Premiere Pro CS4 with all the current updates.
So here is the issue I am having. I captured video on a Canon XL2 in 24fps, 16:9 widescreen, and 2:3:3:2 pulldown. My CS4 project settings were set up as DV-24P Widescreen 48KHz. I did not try changing other settings on the other tabs. I captured the video directly from the XL2 with no dropped frames. The resulting AVI plays back in Windows Media Player 11 correctly. What I mean by that is the is no jerky video, I get no raster lines, and the video quality is very clear. When I load the video into the time line and play it back in the program monitor the video jerks like it is dropping frames, I get raster lines and it looks like video clarity fades in and out.
At first I thought nothing about it. I used Adobe Media Encoder, and burned a DVD. Playback on my widescreen TV looked jerky, rastered, and the video was only clear in static scenes. So I made some test projects with different settings. Still had no success. The original capture looks good, but whatever I do in Premiere the video jerks and looks like old VHS video.
I did another test. I set the XL2 to 30P and 4:3, and captured the video. Again the captured AVI looks good. Put it on the Premiere timeline and played it in the program monitor. It plays fine - good video quality, no rastering, and no jerking. Made a DVD with no problems in the video. So my question is what setting in Premiere do I need to capture, edit, and export 24fps 16:9 widescreen video so that it plays back with with the same video quality as it was captured? Do you think it is an encoder problem? The captured AVI is what ever encoder came with Windows/Premiere as I have not added any other encoders.
Any help would be apperciated. If I have not supplied enough information, please just ask.

If the video is playing back badly in Premiere Pro from the timeline, then the things I would check would be the program monitor quality - is it set to highest...if you don't know where that it is, click on the 4 horizontal lines in the top corner of the program monitor - make sure highest quality is selected. It also may be a video card issue - are your drivers up to date? If the clips are only playing back badly on the PPro timeline (and anything exported from it), but fine in Windows Media Player - something is up.
As for the frame rate - no, you don't have to work at 24P...as mentioned before, the camera actually records at 29.97 fps, but is able to be played back and edited at 23.976 fps (or 24P)...it's a complicated explanation on how it all works...
If you're going to finish to a regular DVD, then working at 29.97 is the way to go. As for the interpret footage command, highlight the clips in your bin, then right click on them - in the menu, you'll see interpret footage - click on that and a new window should open...you should see a box with a check next to it that says remove 24P pulldown - click it (removing the check) and the footage frame rate should change to 29.97 - then click OK...create a 29.97 sequence (DV NTSC Widescreen 48Khz), and edit away.

Need help with overclocking my x58 pro-e

hi i have this new mb from msi and i need help fixing stability issues :
ok here i go i did the normal oc to 3.1 that needed nothing voltage wise so now i need to go pro ^^ so plz help me out and 1 more thing if u know any thing about ssd and ide mode or there is any thing better plz help me out :>
ok i tried oc it to 4.2 it runs fine tell it hangs some times and freezes or even do some restarts on its own the usual i mean for a fail oc :P if u could help me out setting up my oc in a pro way i would love u for ever ^^
specs r writing down under ^^

OK i m back guys and sorry i took so long i tried some new O.C and i got so far as 3.7 on my cpu i saw that i had like really bad heat on the cpu on OCCT/prime and other testing programs i easily got to 95+ witch i stoop not wanting to know where it will hit :P
then i opened my pc yanked the motherboard out removed the cooler and the IOH cooler cleaned them both up reapplied the Thermal Grease witch came with my Thermaltake ISGC-400 and for extra cooling i add a sec fan on top of the cooler fan (yes it made some extra noise but it works :P ) rebuild it and tried again and the result was :
ideal temp: 60+ / load temp: 95+ / IOH temp: 85-95+ // and now :
SAME !!!! but the IOH dropped like a charm to 55 maybe 65 max .
so i know it was time to google some webpages and i saw some photos of CPU-Z all showing low core voltage and by low i mean the standard core i7 920 voltages ! mine was given by the auto bios setting so i continued searching tell i found out the higher the V.core is the high hte numbers are on the sensors !
i found out that a standard voltage will take me to 4GHz of speed so i tried it on my 3.7 (current speed )
and the result was lets just say WOW ! i think :
ideal temp 38+ / load temp: 83 (prime95) / IOH temp : 55-60 (after the cleaning / rergreasing)
so i tried it with my game (wow) and it never raise more than 65 max ! so if i over clocked it to 4K i dont think i will ever overheat it never the less i have a temp montering it with a max 85 on the alarm .
so far my tests and errors :
Multiplier= x21
bus speed = 177
voltages:
QPI: 1.30
CPU V.core : 1.28ish i cant realy tell from the bios
CPU PLL: 1.82ish same thing
speedstep=off/turbo=off/C1E=off/execute = off /over speed protection=off /V.tech=off/HPET=on(so numbers wont play much on cpu-z)
now for ram :
3x6 ratio ( in bios in windows it shows 2:6 for some reason ) DRAM frequency is showing 531 Mhz
9.9.24.88
V=1.5
any thing above these settings will crash the pc/not booting at all and i feel its not a stable system now ether so tell me what im doing wrong here please since there was a post just about like me in this forum but the man who made it never got back to you :> ty and realy sorry for the long post ^^

Help! with X-fi Elite Pro 1. Toslink issue. 2. Phono issue

Similar Messages

Maybe you are looking for