Help With X Fi Fatality I/O Dr

This problem has just started with me and I have absolutely no clue why or how to fix it, here is what is going on.
On my I/O dri've my headphone jack doesn't work, I can plug something in and if I have the box checked to mute speakers it does but with the volume knob and my pc volume turned all the way up not a thing comes out of my headphones that I plug in.
Do I need my front bay replaced?
Someone help me out here anything would be appreciated

. Bad power connector to the Fatalty I/O dri've. If the I/O dri've had a function light on it, I would of know it wasn't getting power. But anyway, those little computer voltage testers made just for molex plugs and other plugs work great and helped me find this problem with my power connector.

Similar Messages

Help with X fi Fatality

I am having problems with I think driver issues with my X Fi Fatality. I have installed the new drivers from the website but it still gives me a bsod when I try to switch modes on the card, or start the console launcher or any of the other programs for it. I have a duo core intel, asus p5w motherboard, 2 Gig of ram and Windows Vista 32 bit version and a radeon 4670 vid card. I have been trying forever to get this thing to work and I am getting discouraged. I am thinking of moving up to Windows 7 but I would like to get this soundcard working it is the only thing that doesnt work right. I have my old Audigy 4 and as a last resort may have to go back to it.....anyone out there that can help with this?

thanks that worked.
but now i have a second problem i can not get my mic to work on the front panel(line in 2/mic in 2)
i tryed everything.i tryed muvixer. but i cant get it to work not in games not in teamspeak not in everything.
yes i have my x-fi as default in windows.both as sound device and as recording device.
when i plug in the jack it automaticly sets the recorder(entertainment mode) to line in 2/mic in 2 but the mic wont work.i specialy bought this card with front panel to use my headset on the front panel
which is very handy,if i can get it to work.is there anyone who can help me.i will be very thankfull
regards Broekieedit:is it wise to remove the shunt?
Message Edited by Broekie on 08-08-2007:24 AM
Message Edited by Broekie on 08-08-2007:24 AM

Help with Error: PANIC: fatal region error detected; run recovery

Here's what I'm trying to do:
I am trying to us BDBXML in a webapp using tomcat 5.5. I have a class that is responsible for opening and closing the db. This class is accessed by a servlet for some AJAX RCP stuff and it also serves as an access point for a Web Service (Apache Axis). This class looks like this:
public class DG implements Serializable {
private javax.xml.datatype.DatatypeFactory datatypeFactory;
private Environment environment;
private EnvironmentConfig environmentConf;
private XmlContainer xmlContainer = null;
private XmlManager xmlManager = null;
private XmlManagerConfig xmlManagerConfig;
public DG() {
try {
File envHome = new File("C:\\bdbxml\\database");
environmentConf = new EnvironmentConfig();
environmentConf.setAllowCreate(true);
environmentConf.setInitializeCache(true);
environmentConf.setInitializeLocking(true);
environmentConf.setInitializeLogging(true);
environmentConf.setRunRecovery(true);
environmentConf.setTransactional(true);
environmentConf.setLockDetectMode(LockDetectMode.MINWRITE);
     //tried the following with default and 10000
     environmentConf.setMaxLockers(100000);
environmentConf.setMaxLockObjects(100000);
environmentConf.setMaxLocks(100000);
environmentConf.setTxnMaxActive(100000);
environment = new Environment(envHome, environmentConf);
CheckpointConfig cpc = new CheckpointConfig();
cpc.setKBytes(500);
environment.checkpoint(cpc);
xmlManagerConfig = new XmlManagerConfig();
xmlManagerConfig.setAdoptEnvironment(true);
xmlManager = new XmlManager(environment, xmlManagerConfig);
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setNodeContainer(true);
xmlContainer = xmlManager.openContainer("container.dbxml", xmlContainerConfig);
xmlContainer.sync();
datatypeFactory = javax.xml.datatype.DatatypeFactory.newInstance();
} catch (FileNotFoundException e) {
     e.printStackTrace();
} catch (DatabaseException e) {
     e.printStackTrace();
} catch (DatatypeConfigurationException e) {
     e.printStackTrace();
public void close() {
try {
if (xmlContainer != null) {
xmlContainer.close();
if (xmlManager != null) {
xmlManager.close();
} catch (DatabaseException e) {
e.printStackTrace();
public String getDocument(String docId) {
try {
XmlDocument doc = xmlContainer.getDocument(docId);
String docString = doc.getContentAsString();
doc.delete();
return docString;
} catch (XmlException e) {
e.printStackTrace();
public Result[] search(Search search) {
try {
     //normally I construct the query string using the Search object
StringBuffer q = new StringBuffer("subsequence(collection('container.dbxml')/metadata[contains(./idinfo//title, 'Ecology')], 1,10)");
XmlQueryContext xqc = xmlManager.createQueryContext();
XmlQueryExpression xqe = xmlManager.prepare(q.toString(), xqc);
XmlResults xr = xqe.execute(xqc);
int i = 0;
Vector<Result> vec = new Vector<Result>();
while (xr.hasNext()) {
XmlValue xv = xr.next();
XmlDocument xd = xv.asDocument();
Result r = new Result();
r.setMetadata(xd.getContentAsString());
r.setDocumentId(xd.getName());
XmlValue groupVal = new XmlValue(XmlValue.STRING);
xd.getMetaData("", "group", groupVal);
r.setGroup(groupVal.asString());
XmlValue ownerVal = new XmlValue(XmlValue.STRING);
xd.getMetaData("", "owner", ownerVal);
r.setOwner(ownerVal.asString());
XmlValue createdVal = new XmlValue(XmlValue.DATE_TIME);
xd.getMetaData("", "created", createdVal);
r.setCreated(createdVal.asString());
XmlValue updatedVal = new XmlValue(XmlValue.DATE_TIME);
xd.getMetaData("", "updated", updatedVal);
r.setModified(updatedVal.asString());
r.setPosition(search.getStartPosition() + i);
updatedVal.delete();
createdVal.delete();
ownerVal.delete();
groupVal.delete();
xd.delete();
xv.delete();
vec.add(r);
i++;
xr.delete();
xqe.delete();
xqc.delete();
return vec.toArray(new Result[vec.size()]);
} catch (XmlException e) {
e.printStackTrace();
// PLUS SOME OTHER METHODS, BUT USING ONLY THESE TO TEST
The Servlet looks like this:
public class DGServlet extends javax.servlet.http.HttpServlet implements javax.servlet.Servlet {
private DG dg;
private final XPathFactory xpf = XPathFactory.newInstance();
private final XPath xp = xpf.newXPath();
private final SimpleDateFormat df = new SimpleDateFormat("EEE MMM d HH:mm:ss z yyyy");
public DGServlet() {
super();
@Override
public void destroy() {
try {
dg.close();
} catch (Exception e) {
log(e.getMessage());
e.printStackTrace();
super.destroy();
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
String action = request.getParameter("action");
if (action != null && !action.equals("")) {
if (action.equals("search")) {
response.setContentType("text/xml");
Result[] result = null;
try {
result = dg.search(constructSearch(request));
} catch (Exception e1) {
log(e1.getMessage());
e1.printStackTrace();
if (result==null || result.length==0) {
response.getWriter().print("0");
return;
StringBuffer sb = new StringBuffer("<results>");
for (int i = 0; result != null && i < result.length; i++) {
try {
sb.append("<result"
+ " title='"
+ xp.evaluate("/metadata/idinfo//title", new InputSource(new StringReader(result[i]
.getMetadata()))));
sb.append("' northbc='"
+ xp.evaluate("//northbc", new InputSource(new StringReader(result.getMetadata())))
+ "' southbc='"
+ xp.evaluate("//southbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' eastbc='"
+ xp.evaluate("//eastbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' westbc='"
+ xp.evaluate("//westbc", new InputSource(new StringReader(result[i].getMetadata())))
+ "' docid='" + result[i].getDocumentId() + "' group='" + result[i].getGroup()
+ "' owner='" + result[i].getOwner() + "' position='" + result[i].getPosition()
+ "' modified='" + result[i].getModified() + "' created='" + result[i].getCreated()
+ "'>");
NodeList nodes = (NodeList) xp.evaluate("//digform", new InputSource(new StringReader(result[i]
.getMetadata())), XPathConstants.NODESET);
for (int j = 0; j < nodes.getLength(); j++) {
sb.append("<resource download='"
+ StringEscapeUtils.escapeXml(xp.evaluate("//networkr", new InputSource(
new StringReader(XMLUtil.printDOMTree(nodes.item(j)))))));
sb.append("' format='"
+ StringEscapeUtils.escapeXml(xp.evaluate("//formname", new InputSource(
new StringReader(XMLUtil.printDOMTree(nodes.item(j)))))));
sb.append("'></resource>");
sb.append("</result>");
} catch (XPathExpressionException e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerConfigurationException e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerFactoryConfigurationError e) {
e.printStackTrace();
log(e.getMessage());
} catch (TransformerException e) {
e.printStackTrace();
log(e.getMessage());
sb.append("</results>");
response.getWriter().print(sb.toString());
else if (action.equals("details")) {
response.setContentType("text/html");
String str = "";
try {
str = dg.getDocument(request.getParameter("docId"));
response.getWriter().print(
setTranslatePage(str, new java.net.URL(
"http://localhost:8080/datastream/stylesheets/fgdc/fgdc_classic.xsl")));
} catch (Exception e) {
e.printStackTrace();
log(e.getMessage());
public void init() throws ServletException {
super.init();
dg = new DG();
It seems to work fine for a while, but then I get errors like the following:
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
com.sleepycat.dbxml.XmlException: Error: DB_RUNRECOVERY: Fatal error, run database recovery, errcode = DATABASE_ERROR
at com.sleepycat.dbxml.dbxml_javaJNI.XmlManager_prepare__SWIG_0(Native Method)
at com.sleepycat.dbxml.XmlManager.prepare(XmlManager.java:586)
at edu.washington.cev.datastream.api.DG.search(DG.java:935)
at edu.washington.cev.datastream.servlets.DGServlet.doGet(DGServlet.java:83)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)
I've set this up on a Window XP machine using tomcat 5.5 and java 5 as well as a Redhat Linux machine with tomcat 5.5 and java 5. I'm using the Web Service point for other servers to access the database. Everything starts up and runs for a little while, but I can't seem to pin down what causes the errors. I've run recovery multiple times as well as started new databases. Any help is appreciated.

There's a bug in your use of DB XML somewhere. Are you committing or aborting every transaction that you start, and calling delete() explicitly on all the DB XML objects that you use?
Those errors mean your database has become corrupted somehow.
John

Need help with XFI extremegamer fatal

Hi guys I have a XFI extremegamer fatality edition.
my specs are:
ABIT IN932-MAX 680i
intel c2d e6600
I just format windows.
Inserted the sound card and I can see its light its ON but Windows does not recognizes it...
What can I do?!?!?!
Please help =(

I already changed PCI slots...
Dont know why is giving me this problem now.
I dont understand why if it is connected and ON windows does not recognizes it =/

Need help with Acrobat Xi installation error

Here is the error I am getting...
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1311.Source file not found: C:\Windows\Installer\Data1.cab. Verify that the file exists and that you can access it. ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603 ------------------------------------------------------------------------------------- "Windows 7. Have tried installation several times. Need help now, considering I am paying for this service!

Thank you for the replies.
Jeff, I will check that link and try what is suggests.
Bill, to answer your questions...
1. This is a CC installation.
2. Yes, I am logged in as the admin and I have no anti-virus other than Microsoft Essentials enabled.
3. This is a download installation.
To give even more info that might help, I am using a Windows 7 machine with more than enough capability to run CC. I had installed Photoshop, Illustrator, among other apps successfully. I then tried the Acrobat XI installation. Acrobat XI downloaded and extracted, but when it started installing it froze around 50% and then I received the installation failed error from Windows. Once that was confirmed the CC install progress finishes but shows failure. The More Info reveals the error I pasted in above. Afterward, none of the CC apps worked properly and had to be uninstalled. So, next I installed the CC downloader and tried to start installing Acrobat XI first but the same error occurred. That's when I got frustrated and posted my original message. My limited knowledge leads me to think the error issue lies in the AcroPro.msi file but I have no idea what that is or how to find, correct, or install it.
Thanks again for any help you can provide. I'm really frustrated that I'm paying for something that I can't use.

Need help with log4j logging tool (org.apache.log4j.*) to log into database

Hi,
I need help with log4j logging tool (org.apache.log4j.*) to log into database using JDBCAppender. Have look at my logger code and corresponding log4j.properties file stated below. I'm running this program using Eclipse IDE and it's giving me the following error (highlighted in red) at the end:
log4j: Parsing for [root] with value=[debug, stdout, Roll, CRSDBAPPENDER].
log4j: Level token is [debug].
log4j: Category root set to DEBUG
log4j: Parsing appender named "stdout".
log4j: Parsing layout options for "stdout".
log4j: Setting property [conversionPattern] to [%x %d{HH:mm:ss,SSS} %5p [%t] (%c:%-4L %M) - %m%n].
log4j: End of parsing for "stdout".
log4j: Parsed "stdout" options.
log4j: Parsing appender named "Roll".
log4j: Parsing layout options for "Roll".
log4j: Setting property [conversionPattern] to [%x %d{yyyy.MM.dd HH:mm:ss,SSS} %5p [%t] (%c:%-4L %M) - %m%n].
log4j: End of parsing for "Roll".
log4j: Setting property [file] to [HelloWorld.log].
log4j: Setting property [maxBackupIndex] to [10].
log4j: Setting property [maxFileSize] to [20KB].
log4j: setFile called: HelloWorld.log, true
log4j: setFile ended
log4j: Parsed "Roll" options.
log4j: Parsing appender named "CRSDBAPPENDER".
{color:#ff0000}
Can't find class HelloWorld{color}
import org.apache.log4j.*;
public class HelloWorld {
static Logger log = Logger.getLogger(HelloWorld.class.getName());
public static void main(String[] args) {
try{
// Now, try a few logging methods
MDC.put("myComputerName", "Ravinder");
MDC.put("crsServerName", "ARNDEV01");
log.debug("Start of main()");
log.info("Just testing a log message with priority set to INFO");
log.warn("Just testing a log message with priority set to WARN");
log.error("Just testing a log message with priority set to ERROR");
log.fatal("Just testing a log message with priority set to FATAL");
catch(Exception e){
e.printStackTrace();
------------------------- log4j.properties file ------------------------------
#### Use three appenders - log to console, file and database
log4j.rootCategory=debug, stdout, Roll, CRSDBAPPENDER
log4j.debug=true
# Print only messages of priority WARN or higher for your category
# log4j.category.your.category.name=WARN
# Specifically inherit the priority level
# log4j.category.your.category.name=INHERITED
#### stdout - First appender writes to console
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=%x %d{HH:mm:ss,SSS} %5p [%t] (%c:%-4L %M) - %m%n
#### Roll - Second appender writes to a file
log4j.appender.Roll=org.apache.log4j.RollingFileAppender
##log4j.appender.Roll.File=${InstanceName}.log
log4j.appender.Roll.File=HelloWorld.log
log4j.appender.Roll.MaxFileSize=20KB
log4j.appender.Roll.MaxBackupIndex=10
log4j.appender.Roll.layout=org.apache.log4j.PatternLayout
log4j.appender.Roll.layout.ConversionPattern=%x %d{yyyy.MM.dd HH:mm:ss,SSS} %5p [%t] (%c:%-4L %M) - %m%n
#### CRSDBAPPENDER - third appender writes to the database
log4j.appender.CRSDBAPPENDER=org.apache.log4j.jdbc.JDBCAppender
log4j.appender.CRSDBAPPENDER.Driver=net.sourceforge.jtds.jdbc.Driver
log4j.appender.CRSDBAPPENDER.URL=jdbc:jtds:sqlserver:/arncorp15:1433;DatabaseName=LOG
log4j.appender.CRSDBAPPENDER.USER=sa
log4j.appender.CRSDBAPPENDER.PASSWORD=p8ss3doff
log4j.appender.CRSDBAPPENDER.layout=org.apache.log4j.PatternLayout
log4j.appender.CRSDBAPPENDER.sql=INSERT INTO LOG (computername, crsservername, logtime, loglevel, threadname, filename, linenumber, logtext) VALUES ('%X{myComputerName}', '%X{crsServerName}', '%d{dd MMM yyyy HH:mm:ss,SSS}', '%p', '%t', '%F', '%L', '%m')
#log4j.appender.CRSDBAPPENDER.sql=INSERT INTO LOG(COMPUTERNAME,CRSSERVERNAME,LOGTIME,LOGLEVEL,THREADNAME,FILENAME,LINENUMBER,LOGTEXT) select host_name(),'${CRSServerName}${InstanceName}','%d','%5p','%t','%F','%L','%m%n'
#log4j.appender.CRSDBAPPENDER.sql=INSERT INTO LOG (computername, crsservername, logtime, loglevel, threadname, filename, linenumber, logtext) VALUES ("%X{myComputerName}", "%X{crsServerName}", "%d{dd MMM yyyy HH:mm:ss,SSS}", "%p", "%t", "%F", "%L", "%m")
------------------------------- end of log4j.properties file ------------------------------
Here is the directory structure of my program. My log4j.properties file and HelloWorld.class file are residing in folder HelloWorld\bin.
HelloWorld\bin
HelloWorld\lib
HelloWorld\src
Please note - The same program works fine for console and file appender when I comment the database appender part in my properties file.
Thanks
Ravinder

try this :
log4j.appender.PROJECT.Append=false

Error 1603: Need some help with this one

When installing iTunes I first get an error box saying
"Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
The second one (after I click on Ignore on the last box) I get it this one:
"Error: -1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for more information"
Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
Anyway I really need some help with this, anyone got any ideas?
Greets,
Sixten
Windows XP Pro

Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Creation of context sensitive help with pure FM 12 usage doesn't work

Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000    1
#define 2022    2
#define 2030    3
#define 2180    4
#define 2354    5
#define 2560    6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
Mohi

Hi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help With X Fi Fatality I/O Dr

Similar Messages

Maybe you are looking for