Help with X-Fi Titanium Fatal1ty Pin Read

Need help looking up the pin readouts on the X-Fi Titanium Fatalty. The manual describes two different Titanium models: SB0880 and SB0886. The former only has connector pins for Intel HD Front Panel audio. The latter does not have these pin connectors but has only proprietary DID_EXT (digital, 2 pins [6 top row, 6 bottom row]) and AND_EXT (analog, 8 pins [0 top row, 8 bottom row]) pin connectors.
Does anyone know where I can find a description of the pin layout of the AND_EXT and DID_EXT connectors? Again, although the Intel connectors are described in detail, these ones are not described at all in the manual. I'm trying to use an internal aux connector from my tv card to the sound card, so I'm trying to see if I can make a custom cable to do this. Otherwise, I'm using an external line out cable for now. The optional I/O dri've does have aux rca inputs on them.

Hard to say, just because the sound is cutting out it may not be the card that is the issue. This could be cause by pretty much anything - drivers, bug apps, other hardware problems etc etc.
If you haven't done a system reset recently, i.e. re-install OS, drivers and programs you could try that to see if the issues remain. Sometimes moving the audio card to another PCIe slot can sometimes help.

Similar Messages

Help with X-Fi Titanium

Hi, guys
I am on a Win7 OS & have just installed the X-fi Titanium.
Installed all drivers & software, connected my PC to my home surround system via digital out.
Here is my problem, when I switch my settings to DTS connect or Dolby Digital Li've, I am able to get sound thru the Creative speaker set up & I also get system sound thru, but I can't get sound playing video/audio files. When I turn DTS connect or Dolby Digital Li've off, I get sound thru, but obviously as PSM.
Is there anybody out there that can give me some help with my problem?
Thanks in advance,

To be honest with you Boon2 I have gotten the best results by installing in safemode & cleanboot state. I have tried installing the regular way from the desktop, but had no luck at all, that is why I'm here now because I couldn't install the software normal way. I've tried the install method suggested by creative T/S which was to install in a cleanboot state and delete the previous install in cleanboot & reinstall while in cleanboot I had no luck, I have also used Dri'vesweeper to delete all creative drivers while in safemode & regular way from the desktop.
The problem I think is the soundcard? is not being recognized, because when I finally got everything to install, software wise, when I reboot I would?get found new hardware (AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS) and in my device manager, I have a yellow (!) by OTHER DEVICES: AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS? And under the SOUND, VIDEO GAMING CONTROLS I have the following listed: AUDIO CODECS, LEGACY AUDIO DRIVER, LEGACY VIDEO CAPTURE DEVICES, MEDIA CONTROL DEVICES & VIDEO CODECS.
New if I try and delete the MS UAA BUS DRIVER from System Devices, then that would get ride of the AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS? and I can install the latest CreativeDriver XFTI PCDRV LB 2 7 0006. But as soon as I reboot I get FOUND NEW HARDWARE WIZARD for MS UAA BUS DRIVER the driver installs for it and this also puts the AUDIO DEVICE ON HIGH DEFINITION BACK in my device manager.
How can I permanently get ride of the MS UAA BUS DRIVER?

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
I liked that very much.
So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

@. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!?

Any [email protected]

Help with Acrobat 7 Pro (making savable Reader PDFs and making columns do math)

Do forgive me as I normally don't make interactive PDFs, but I need to know a couple of things.
I'm using Acrobat Professional 7 at home, but have access to Pro 8. In 7, show do you make the PDF save info along with the PDF in Adobe Reader? I've seen how to do it in Pro 8, which allows 500 hits to the file, which is plenty fine for the use for the forms I'm making. But in Pro 7, I cannot not find this feature to let Reader save filled in form fields.
Now the attachment to my post is the second (but not as important) issue.
I need to try and make the fields on this form do adding, subtracting, and multiplication. How do I do that? I have no java programming experipence. Here is how I want the columns to work:
Texts 29, 34, 39, and 44 should add up in Text 46. Texts 30, 35, 40, and 45 should add up in Text 47.
Text 48 should subtract from Text 46 and Text 49 should subtract from Text 47 if used. The results should then show in Texts 52 and 53 respectively.
Now here's the tricky bit. Texts 50 and 51 are optional. If the senior discount is applied, then Texts 52 & 53 should have a 5% discount applied to the totals.
Is this doable by a non-programmer? Any help is greatly appreciated.
Bill Rudloff

So the Feature can not be invoked by Acrobat 7 but is availble if turned on in Reader 7.
The OP said he had 7 at home but access to 8. So depending on whether Micahel was addressing Acrobat or Reader his answer can go either direction. The ability to do is in 8 and 9 Acrobat. And 7, 8, 9 Reader is able to use it.
As I phrased my comment after Michaels I defered to his expertise. And was adding the additional comments that Reader 7, 8, 9 can use it . But only 8, 9 Acrobat can invoke it.
So we are all correct to a degree.

Trying to use SPDIF BYPASS with X-Fi Titanium Fatal1ty

I need help guys!! I've bought a Creative X-Fi Titanium Fatalty Pro PCI-E x a few days ago and everything is working great with the lastest drivers (even DTS Connect, Interacti've, DDL, etc... Everything is fine) but now i want to use the digital input to "bypass" the audio from my SKY HDTV (Home Theater Samsung X-70 digital input, hdmi input and hdmi output) and i've done everything and i can't hear anything... SKY HDTV - > X-FI Titanium Digital Input - > X-Fi Titanium Digital Output -> Samsung HT-X70
I have the SKY HDTV plugged into my Sound card via Toslink Digital Optical cable.
I had done some research online about needing to enable the decoder in the Creative Audio Control Panel, but I have no "Decoder" Tab. Also, there is a tab called SPDIF I/O when I select it, SPDIF input settings are grayed out and in the box is default (pre-selected).
Is there a fix to get a decoder for this sound card, or what should i do?
System config
Core 2 Duo E8400 @ 3.6Ghz
Gigabyte GA-EP43-DS3L
2x2GB Corsair Dominator DDR2 066Mhz
Sapphire HD4890 GB GDDR5 VaporX
Creative X-Fi TItanium Fatalty Pro Series PCI-Ex
Corsair 450VX
Samsung 40" LCD LN40A550 - 920x080@60Hz
Samsung HT X-70
Windows 7 X64 RTM

OK Helsing, let me see if I understand you, If you want to decode DD and DTS, PowerDVD will do the trick, but so will VLCMedia player, etc. If you want to send a pure untouched signal through to your receiver so it can decode it and play it, then that is SPDIF passthrough. That means the signal will go through your system untouched and out to your receiver........and yes there is that setting for it in the SHARK codec package. Shark's package will also use FFDshow or whatever of its components to do the job of which you are speaking.....
http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7

I need help with some simple code! Please read!

hi everyone.
I'm having problems with a piece of code, and i'd be extremely greatful if somebody could give me a hand with it. I'm totally new to java and have to make a program for my university degree, but i'm finding it extremely difficult, mainly due to my total lack of apptitude for this type of thing. I know this is easy stuff, but the books I have are no use so any help would be greatly appreciated.
I have to write a program which uses two class files. I want one with the code to produce a simple button, and one to invoke it several times at different locations. I decided to write the program as one class file at first, and thought i'd be able to split it up at later. The program works fine when it is one class file. My book said that to split the two classes up, all i needed to do was change the second class to public, although this seems to not work at all. I'm at my wits end on this, and if anyone could correct my code I'd be eternally greatful.
Here is the first class... (sorry about the lack of indentation)
>>>>>>>>>>
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20);
>>>>>>>
This is the second class....
>>>>>>>
public class PhoneButton {
private Button butt;
public PhoneButton(int a, int b, int c){
setLayout(null);
butt = new Button();
butt.setBounds(a,b,20,20);
add(butt);
>>>>>>>>
My compiler generates errors relating to Button, but i can't do anything to please it.
Also, could anyone give me some pointers on how to add a different number or symbol to each button. That is what I added int c for, but i couldn't get it to work.
Cheers in advance.
Michael Morgan

I found that there are 5 error in your code.
1. You should import the "java.awt" package to the PhoneButton.java
2. The PhoneButton is not a kind of Component. You cannot not add it to the Phone class
3. the myButton = new PhoneButton(20, 20) does not provide enough parameters to create PhoneButton
4. You cannot add a Button to a PhoneButton. Becaue the PhoneButton is not a kind of Container
Fixed code:
import java.awt.*;
public class PhoneButton extends Button {
public PhoneButton(int a, int b, int c){
setBounds(a, b, 20, 20);
setLabel(String.valueOf(c));
===========================================
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20, 1);
======================
Visual Paradigm for UML - Full Features UML CASE tool
http://www.visual-paradigm.com/

Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Is true SPDIF Passthrough possible with X-Fi Titanium Fatal1ty P

I recently installed my X-Fi Titanium Fatalty Pro sound card and for the life of me I can't find where I can turn on SPDIF passthrough.
I know about the Dolby Digital Li've, and that's not what I want, I want just the simple optical SPDIF passthrough.
I also don't believe the option for Play Stereo Mix using Digital Output is the same either. Not looking for a stereo mix, just passthrough.
Can anyone help me out here?

I have the same card and I was able to figure how to do the real optical SPDIF passthrough in Vista X64.
First unselect the Dolby Digital Li've if you have that option on.
Second, I unchecked the stereo mixing feature in the creative volume panel.
Finally, you have to select the SPDIF Out Device as the default playback device in the windows sound manager (just right click in the windows speaker icon in the taskbar and select playback devices, NOT in the creative volume panel. There you can check with some tests if the Dolby and DTS sound is passing through the optical SPDIF correctly.
For Dolby Prologic II (PS2 emulator) I had to manually select to decode in that format to work (in my home theater options).
I have tested my method with a DVD Movie and it worked perfectly!, my external receiver detects de Dolby Digital signal from the movie automatically.
Message Edited by ron007g on 08-0-2008 04:03 PM

I need basic help with my VISTA laptop. Adobe Reader X (10.1.4) IS INSTALLED BUT NOT WORKING.

A basic questions. My laptop VISTA has Reader X (10.1.4) installed. Internet add ons has Adobe PDF llink helper enabled. I am not able to open PDF files?

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

Help With Tools & Highlighting in new Adobe Reader

Can anyone help me find the tool menu and highlight function in he new Adobe Reader. When I bring up an online document it no longer has the tool menu option. There also used to be the adobe logo that you could click on to bring up the tool menu. Can anybody help?
Thanks

Try saving the file and then opening it in the application directly instead of via the browser.

Help with Powerbook G4 Titanium

I just bought a second hand Powerbook with original Airport card. The card recognizes my wireless router but can't connect to it. It's running OSX 10.4 and its a Buffalo Airstation WHR-G125 router. Its set for WPA encryption. Any advice? I have checked system profiler and the card seems to be working ok.

Ensure that the Buffalo is using an 802.11b compatible mode.
Try configuring the Buffalo to use a channel between 1 and 11.

5.1 issues with X-Fi Titanium Fatal1ty

Hi folks, how's it going?
I'm having several problems setting up 5. surround sound with my Sound Blaster X-Fi Titanium Fatalty Pro. I'm connecting to my DDTS-00 reciever via an optical cable, and using Dolby Digital Li've or DTS Connect (I get the same results with both technologies).
I can get surround sound working in Halo and Halo 2. However, I have to check the "allow applications to take exclusi've control of this device" box in Control Panel > Sound > SPDIF Out > Advanced tab to get them to work. This causes Windows Media Player to throw up the error "Windows Media Player encountered a problem while playing the file" whenever I try to play an mp3. Yet if I uncheck the "exclusi've control" box, I just get stereo sound from my games but WMP works fine.
As an exception, with Gears of War, Trillian, and Windows Vista itself I only get stereo when the box is unchecked, and NO sound when I have the box checked.
So, any ideas what I can possibly do? I'm using all the latest drivers and software versions.

If I were you, I'd run the 5. analog outputs from the soundcard into the DDTS-00. The DDTS-00 has the 6 rca inputs for analog input. That should give you less grief when gaming and listening to music at the same time. That's what I do on mine, everything works good that way and there's no fighting over the SPDIF output. And with analog,?you also have more control over all the application volumes, with SPDIF out, you do not.
Using the SPDIF out?will never provide a perfect medium for concurrent gaming and movie/music listening, at least with Creative's (and others) current implementation.
Use EAX when available for games, and if required use Alchemy?if the game needs it.
Message Edited by blasturd on 09-03-2008 07:05 AM

Microphone Trouble with X-FI Titanium Fatal1ty Pro

I just cannot get my mic to work anymore, even when it did it was muffled and sounded awful, I have installed and re installed everything I can think of. Any suggestions?

Can anyone help me?

Help with X-Fi Titanium Fatal1ty Pin Read

Similar Messages

Maybe you are looking for